Shop
Showing 3091–3120 of 3735 results
-
12V Accessories, Electrical
SAW Switch – Momentry Push Button
SAW Switch – Momentry Push Button
- Momentry (on)/off switch.
PART NUMBER DESCRIPTION VOLTS CUT OUT SAW-30198 
Push Button BCP knob with rubber boot 12V Dia. 16mm SAW-30199 
Push Button BCP knob 12V Dia. 16mm SAW-30201 
Push Button BCP knob with red rubber cap 12V Dia. 16mm SKU: SAW-30198, SAW-30199, SAW-30201 -
-
12V Accessories, Electrical
SAW Switch -Push Button
SAW Switch -Push Button
• Waterproof compact button with rubber cap and chrome plated bezel and contacts.
• Rated at 8 amps.
• Can be mounted through a maximum 6mm dash.
Shaft stem diameter is 22mm.Part No. SAW-30307 
Volts 12V/24V Cut Out Dia. 22mm Dimensions Dia. 30mm x 40mm SKU: SAW-30307 -
Electrical, Switches
SAW Switch Panel Mount Carling
SAW Switch Panel Mount Carling
PART NUMBER DESCRIPTION DIMESIONS SAW-85101 
VM1 Single Black 58.5mm x 34mm SAW-85103 
VM3 3 gang Black 58.5mm x 86.4mm SAW-85105 
VM6 6 gang Black 58.5mm x 164.9mm SAW-85107 
VME End Black 58.5mm x 30.2mm SAW-85109 
VMM Middle Black 58.5mm x 26.3mm SAW-85111 
VHP Hole Plug Black — SAW-85113 
VPS Panel Seal — SKU: SAW-85101, SAW-85103, SAW-85105, SAW-85107, SAW-85109, SAW-85111, SAW-85113 -
12V Accessories, Electrical
SAW Terminal Block
SAW Terminal Block
• Independent source terminal.
• Nylon and nickel plated brass.
• M5 mounting screws
• M4 terminal screws.PART NUMBER STUD TYPE Max voltage amps SAW-302290 
6 gang isolated terminal block 300 30 SAW-302290-10 6 gang isolated terminal block – Pack of 10 300 30 SAW-302291 
12 gang isolated terminal block 300 30 SAW-302291-10 12 gang isolated terminal block – Pack of 10 300 30 SKU: SAW-302290, SAW-302290-10, SAW-302291, SAW-302291-10 -
12V Accessories, Electrical
SAW Terminals – Bullet Connectors
SAW Terminals – Bullet Connectors
PART NUMBER DESCRIPTION COLOUR CABLE SIZE SAW-721038 
Crimp Connector Male Bullet – Pack of 10 Blue 4mm SAW-721039 Crimp Connector Male Bullet – Pack of 100 Blue 4mm SAW-721040 
Crimp Connector Male Bullet – Pack of 10 Red 4mm SAW-721041 Crimp Connector Male Bullet – Pack of 100 Red 4mm SAW-721042 
Crimp Connector Female Bullet – Pack of 10 Red 4mm SAW-721043 Crimp Connector Female Bullet – Pack of 100 Red 4mm SAW-721044 
Crimp Connector Female Bullet – Pack of 10 Blue 4mm SAW-721045 Crimp Connector Female Bullet – Pack of 100 Blue 4mm SKU: SAW-721038, SAW-721039, SAW-721040, SAW-721041, SAW-721042, SAW-721043, SAW-721044, SAW-721045 -
12V Accessories, Electrical
SAW Terminals – Butt Splice
SAW Terminals – Butt Splice
PART NUMBER DESCRIPTION COLOUR CABLE SIZE SAW-721048 
Crimp Connector Butt Splice – Pack of 10 Red 2.5-3mm SAW-721049 Crimp Connector Butt Splice – Pack of 100 Red 2.5-3mm SAW-721050 
Crimp Connector Butt Splice – Pack of 10 Blue 4mm SAW-721051 Crimp Connector Butt Splice – Pack of 100 Blue 4mm SAW-721052 
Crimp Connector Butt Splice – Pack of 10 Yellow 5-6mm SAW-721053 Crimp Connector Butt Splice – Pack of 100 Yellow 5-6mm SKU: SAW-721048, SAW-721049, SAW-721050, SAW-721051, SAW-721052, SAW-721053 -
12V Accessories, Electrical
SAW Terminals – Butt Splice – Adhesive Heat Shrink
SAW Terminals – Butt Splice – Adhesive Heat Shrink
PART NUMBER DESCRIPTION COLOUR CABLE SIZE SAW-721120 
Butt Splice Heat Shrink – Pack of 25 Red 2.5-3mm SAW-721121 Butt Splice Heat Shrink – Pack of 100 Red 2.5-3mm SAW-721122 
Butt Splice Heat Shrink – Pack of 25 Blue 4mm SAW-721123 Butt Splice Heat Shrink – Pack of 100 Blue 4mm SAW-721124 
Butt Splice Heat Shrink – Pack of 25 Yellow 5-6mm SAW-721125 Butt Splice Heat Shrink – Pack of 100 Yellow 5-6mm SKU: SAW-721120, SAW-721121, SAW-721122, SAW-721123, SAW-721124, SAW-721125 -
12V Accessories, Electrical
SAW Terminals – Eye and Fork
SAW Terminals – Eye and Fork
PART NUMBER DESCRIPTION COLOUR size size SAW-721056 
Crimp Connector eye – Pack of 10 Red 4mm 2.5-3mm SAW-721057 Crimp Connector eye – Pack of 100 Red 4mm 2.5-3mm SAW-721058 
Crimp Connector eye – Pack of 10 Blue 4mm 2.5-3mm SAW-721059 Crimp Connector eye – Pack of 100 Blue 4mm 2.5-3mm SAW-721060 Crimp Connector eye – Pack of 10 Red 5mm 2.5-3mm SAW-721061 Crimp Connector eye – Pack of 100 Red 5mm 2.5-3mm SAW-721062 Crimp Connector eye – Pack of 10 Blue 5mm 4mm SAW-721063 Crimp Connector eye – Pack of 100 Blue 5mm 4mm SAW-721065 
Crimp Connector eye – Pack of 100 Blue 5mm 5-6mm SAW-721066 Crimp Connector eye – Pack of 10 Red 6mm 2.5-3mm SAW-721067 Crimp Connector eye – Pack of 100 Red 6mm 2.5-3mm SAW-721068 Crimp Connector eye – Pack of 10 Blue 6mm 4mm SAW-721069 Crimp Connector eye – Pack of 100 Blue 6mm 4mm SAW-721070 Crimp Connector eye – Pack of 10 Yellow 6mm 5-6mm SAW-721071 Crimp Connector eye – Pack of 100 Yellow 6mm 5-6mm SAW-721072 Crimp Connector eye – Pack of 10 Blue 8mm 4mm SAW-721073 Crimp Connector eye – Pack of 100 Blue 8mm 4mm SAW-721074 Crimp Connector eye – Pack of 10 Blue 8mm 5-6mm SAW-721075 Crimp Connector eye – Pack of 50 Blue 8mm 5-6mm SAW-721076 Crimp Connector eye – Pack of 10 Blue 9.5mm 5-6mm SAW-721077 Crimp Connector eye – Pack of 50 Blue 9.5mm 5-6mm SAW-721103 
Crimp Connector fork – Pack of 100 Red 4mm 2.5-3mm SAW-721104 
Crimp Connector fork – Pack of 10 Blue 4mm 4mm SAW-721105 Crimp Connector fork – Pack of 100 Blue 4mm 4mm SAW-721107 Crimp Connector fork – Pack of 100 Red 5mm 2.5-3mm SAW-721109 Crimp Connector fork – Pack of 100 Blue 5mm 4mm SKU: SAW-721056, SAW-721057, SAW-721058, SAW-721059, SAW-721060, SAW-721061, SAW-721062, SAW-721063, SAW-721065, SAW-721066, SAW-721067, SAW-721068, SAW-721069, SAW-721070, SAW-721071, SAW-721072, SAW-721073, SAW-721074, SAW-721075, SAW-721076, SAW-721077, SAW-721103, SAW-721104, SAW-721105, SAW-721107, SAW-721109 -
12V Accessories, Electrical
SAW Twin USB-A Ports in C7 Switch housing
SAW Twin USB-A Ports in C7 Switch housing
Part No. SAW-530750 
Width 24mm Height 49mm Type Dual USB with Cover Switch Tablet/Phone Volts 12V Depth 39mm Suits Tablet/Phone Unit Qty 1 Note Dual USB @ 2.4A & 1A. SKU: SAW-530750, SAW-530750-10 -
Anchoring and Mooring, Bollards and Cleats
SAW Weld On Alloy Cleat
SAW Weld On Alloy Cleat
Cast Alloy Cleat – Weld On (Medium).
- Marine grade alloy.
- Weld cleat directly to the deck and paint for a desired finish.
- Pilot hole dimples underneath
PART NUMBER PACK SIZE L X W X H BASE SAW-293719 
Single 230mm x 75mm x 65mm 125mm x 75mm SAW-293719-BULK 20 230mm x 75mm x 65mm 125mm x 75mm SKU: SAW-293719, SAW-293719-BULK -
Winches
SAW Winch Handle – Floating
SAW Winch Handle – Floating
• Made from glass fibre reinforced plastic providing a strong but light weight product.
• Ball bearings in the handle provide a fast and smooth cranking.
• Floats if dropped over board.
• Quick lock and unlock feature.PART NUMBER LENGTH SAW-70720 
254mm (10″) SKU: SAW-70720, SAW-70720-6 -
Lowrance, Lowrance Accessories, Simrad, Simrad Accessories
Scanstrut 14″ PowerTower for 3G 4G Radar
Scanstrut 14″ PowerTower for 3G 4G Radar
For Radomes, Open Array and small SatCom/TV Antenna
Expertly designed to install your antenna on the cabin roof, flybridge or radar arch of your powerboat, providing a clear view of the horizon for maximum antenna performance.
Scanstrut’s Composite PowerTower offers a single “monocoque” structure for outstanding strength and surface finish. Its aerodynamic shape and high gloss finish makes a product that is as strong as it is attractive.
Key Features
Watertight Installation
Pre-fitted IP65 gland to seal cable entry into stem and a watertight base seal included so no need for messy sealant.
Ease of Install
Pre-drilled mounting holes, the antenna fastens to PowerTower top plate using own mounting bolts.
Choice of Heights
150mm (6”) or 350mm (14”) heights available.
Aesthetic Single Piece Moulding
Curves and strength to suit any boat with a 30° aft leaning profile to compliment any powerboat.
SKU: PT2001 -
Fuel Tanks & Accessories, Tanks
Scepter Fuel Tank – 30L with Gauge
Scepter Fuel Tank – 30L with Gauge
30 litre capacity. Complete with vented cap & recessed gauge. Tank size : 490mm L x 345mm W x 250mm H
Quality fuel tanks at a reasonable price. Made by Nuova Rade of Italy these HULK outboard motor fuel tanks are of robust rotationally moulded plastic construction and are completely noncorrosive. They are strong yet lightweight and wont crack dent or rust. The two largest tanks are supplied complete with a fuel level gauge. They are CE approved but NOT approved to Australian standards. Not for use with diesel or ethanol blended fuel.
Features
- Noncorrosive robust construction
- Complete with vented cap with seal 22L & 30L sizes have a fuel gauge
- Supplied complete with standard tank adaptor which includes a mesh fllter and8mm barbed fuel hose connector (simply unscrew the barbed connector to fltstandard fuel tank flttings)
SKU: RWB4584 -
Fittings, Pumps and Plumbing
Scupper Valve White Acetal Surface Mount – 70mm OD (138814)
Scupper Valve White Acetal Surface Mount – 70mm OD (138814)
Designed as a water exit for boats with self draining cockpits. Scupper mounts over flush transom drains above the waterline. The rubber flapper opens to dump water out and closes to prevent backwash. Tough acetal mount flange.
Features:
BLA Code: 138814
Diameter OD mm: 70
ID mm: 38
Mount Screws mm: 4 c/sSKU: 138814 -
Outboard Parts
SE Sport 200 – High Performance Hydrofoil
SE Sport 200 – High Performance Hydrofoil
• Reduces plane time dramatically.
• Narrower design with more surface area than most foils.
• Turbo Trac enhances thrust and control.
• Quick planing reduces fuel expense and increases safety.
• Reduces or eliminates porpoising, cavitation, chine walking and deep-V wander.
• Sleek shape complements today’s new boat designs.
• One piece high strength engineering copolymer.
• Stainless steel hardware included.
• Manufacturer’s lifetime warranty.PART NUMBER COLOUR LENGTH WIDTH SUITS MOTOR INSTALLATION SAW-244200 
Grey 343mm 363mm 8 – 40HP Bolt On SAW-244200-12 Grey 343mm 363mm 8 – 40HP Bolt On SAW-244202 
Black 343mm 363mm 8 – 40HP Bolt On SAW-244202-12 Black 343mm 363mm 8 – 40HP Bolt On SKU: SAW-244200, SAW-244200-12, SAW-244202, SAW-244202-12 -
Outboard Parts
SE Sport 300 – High Performance Hydrofoil
SE Sport 300 – High Performance Hydrofoil
• Reduces plane time dramatically.
• Narrower design with more surface area than most foils.
• Turbo Trac enhances thrust and control.
• Rated fastest in independent tests
• Quick planing reduces fuel expense and increases safety.
• Reduces or eliminates porpoising, cavitation, chine walking and deep-V wander.
• Sleek shape complements today’s new boat designs.
• One piece high strength engineering copolymer.
• Stainless steel hardware included.
• Manufacturer’s lifetime warranty.PART NUMBER COLOUR LENGTH WIDTH SUITS MOTOR INSTALLATION SAW-244206 
Grey 368mm 432mm 40 – 350HP Bolt On SAW-244206-12 Grey 368mm 432mm 40 – 350HP Bolt On SAW-244208 
Black 368mm 432mm 40 – 350HP Bolt On SAW-244208-12 Black 368mm 432mm 40 – 350HP Bolt On SAW-244210 
White 368mm 432mm 40 – 350HP Bolt On SAW-244210-12 White 368mm 432mm 40 – 350HP Bolt On SKU: SAW-244206, SAW-244208, SAW-244210 -
Outboard Parts
SE Sport 400 – High Performance Hydrofoil
SE Sport 400 – High Performance Hydrofoil
• Reduces plane time dramatically.
• Narrower design with more surface area than most foils.
• Turbo Trac enhances thrust and control.
• Quick planing reduces fuel expense and increases safety.
• Reduces or eliminates porpoising, cavitation, chine walking and deep-V wander.
• Sleek shape complements today’s new boat designs.
• One piece high strength engineering copolymer.
• Drill free or bolt on.
• Stainless steel hardware included.
• Manufacturer’s lifetime warranty.PART NUMBER COLOUR LENGTH WIDTH SUITS MOTOR INSTALLATION SAW-244212 
Grey 406mm 432mm 40 – 350HP Disk Grips SAW-244212-6 Grey 406mm 432mm 40 – 350HP Disk Grips SAW-244214 
Black 406mm 432mm 40 – 350HP Disk Grips SAW-244214-6 Black 406mm 432mm 40 – 350HP Disk Grips SAW-244220 
SE Sport 400 Mounting Kit — — — — SKU: SAW-244212, SAW-244214, SAW-244220 -
Boating Accessories, Fishing Gear, Kool Bags
Sea Pro Fish Cooler – Small, Medium, Large
Sea Pro Fish Cooler – Small, Medium, Large
Sea Pro Fish Coolers are an easy way to store your catch and keep it chilled and cold. Ideal for taking out on the boat, Sea Pro Fish Coolers are fully sealed and insulated, and available in four different sizes. They are designed with a stable base so they do not tip over, making them user-friendly and easy to fill. They feature a drain plug at one end for easy emptying, carry handles for easy moving and a fish ruler on the side so you can measure your catch before storing it.
- SIZE Small: 750mm x 400mm x 200mm
- SIZE Medium: 1000mm x 400mm x 200mm
- SIZE Large: 1400mm x 400mm x 300mm
SKU: BBB-AFNAC7272, BBB-AFNAC7289, BBB-AFNAC7296 -
Boating Accessories, Fishing Gear, Kool Bags
Sea Pro Omni Bag
Sea Pro Omni Bag – DELUXE KOOL BAG – OMNI SIZE
SIZE: 500mm x 400mm x 400mm
Kool Bags just got even better! Now with thicker 20mm insulation, they’re the perfect way to store your catch and keep it chilled and cold!
They’re designed with a stable base so they don’t tip over, making them user friendly and easy to fill. Ideal for taking out on the boat!
They feature a drain plug at one end for easy emptying, carry handles for easy moving and a fish ruler on the side so you can measure your catch before storing it!
SKU: AFNAC9072 -
Lighting, Navigation Lights
Seachoice LED Spot / Flood Light Bars
Seachoice LED Spot / Flood Light Bars
Heavy duty aluminium housing and polycarbonate lens. Dual power use with 12VDC and 24VDC systems. IP65 rated for dust and water resistance. Hard wired.
BLA CODEDESCRIPTIONWIDTH MMHEIGHT MMDEPTH MMLUMENSVOLTSLED COLOURSLED’SHOUSING405112 
Seachoice 12 LED Light Bar Black 184 76 89 1550 12-24v White 12 Black 405114 
Seachoice 12 LED Light Bar White 184 76 89 1550 12-24v White 12 White 405102 
Seachoice 24 LED Light Bar Black 345 76 88 2717 12-24v White 24 Black 405106 
Seachoice 24 LED Light Bar White 345 76 88 2717 12-24v White 24 White 405100 
Seachoice 40 LED Light Bar Black 540 76 88 4521 12-24v White 40 Black 405104 
Seachoice 40 LED Light Bar White 540 76 88 4521 12-24v White 40 White 405108 
Seachoice 60 LED Light Bar Black 838 76 88 6777 12-24v White 60 Black 405110 
Seachoice 60 LED Light Bar White 838 76 88 6777 12-24v White 60 White SKU: 405100, 405102, 405104, 405106, 405108, 405110, 405112, 405114 -
Bilge Pumps, Pumps and Plumbing
SEAFLO 1100GPH Bilge Pump
SEAFLO 1100GPH Bilge Pump
SEAFLO non-automatic 1100GPH bilge pumps offer water evacuation activated by a panel or float switch. Include Anti-Airlock protection and exclusive moisture tight seals,marine grade blockd wiring.Our larger impeller design and more robust motor allow us to outperform our competitors. Our removable strainer base fits industry standard mounting conventions though, so you’ll have no problem changing to us from them.Availalble for DC 12 Voltage & 24 Voltage.
MORE FEATURES
- 2 Year Warranty
- Meets or exceeds RoHS, SGS, and ISO standards
- Traditional operation by switch or float switch
- Entirely submersible
- Snap-off strainer base for easy maintenance
- Pump and switch are stand alone products
- Sealed efficient,long life motors
- Run dry capable for normal workloads
- Quiet operation
- 110°F (43°C) temperature limits
- Stainless steel shaft
- Anti-Airlock protection
- Exclusive moisture tight seals
- Marine grade blocked wiring
.jpg)
TYPICAL APPLICATIONS
Marine 20ft, Medical, Pond, Water Research, Solar Water System, etc.
DIMENSIONS
STANDARD PUMP CONFIGURATIONS
Model Flow Rate Voltage Max Draw Fuse Amps Head Wire Lead Outlet Dia N.W. / G.W. SFBP1-G1100-01 1130 GPH 12 V 6.0 A 5.0 A 14.8′ (4.5 m) 3′ (1 m) 1-1/8″ 0.38/0.44 kg SFBP2-G1100-01 1120 GPH 24 V 4.0 A 3.0 A 15.7′ (4.8 m) 3′ (1 m) 1-1/8″ 0.38/0.44 kg PERFORMANCE
Voltage(V)Current(A)FlowHead(M)GPHLPH
OPEN 3.8 1130 4276 0 12 4.04 1024 3875 0.5 12 4.22 897 3394 1 12 4.48 752 2846 1.5 12 4.79 635 2403 2 12 5.06 502 1900 2.5 12 5.26 377 1427 3 12 5.53 215 814 3.5 12 5.72 106 401 4 12 6 0 0 4.5 Voltage(V)Current(A)FlowHead(M)GPHLPH
OPEN 1.3 1120 4238 0 24 1.64 995 3765 0.5 24 1.98 873 3304 1 24 2.15 745 2819 1.5 24 2.48 621 2350 2 24 2.62 489 1850 2.5 24 2.98 351 1328 3 24 3.15 186 704 3.5 24 3.48 85 322 4 24 4 0 0 4.8 PERFORMANCE
.jpg)
Key Description Quantity 1 Wire Buckle 1 2 Pump Cover 1 3 Tapping Screw 2 4 Motor Bracket 1 5 Motor 1 6 Seal Base 1 7 Seal 3 8 Motor Cover 1 9 Impeller 1 10 Pump Housing 1 11 Strainer 1 SKU: BBB-MSSFBP1-G1100-01 -
Bilge Pumps, Pumps and Plumbing
SEAFLO 12V Auto Bilge Pump – 1100GPH
SEAFLO 12V Auto Bilge Pump – 1100GPH
Seaflo 1100GPH Automatic Submersible Boat Bilge Water Pump.All-in-one pump & float switch. No additional float switch required. Pump turns on when water level rises & shuts off when water is removed.
MORE FEATURES
- 2 Year Warranty
- Snap-off strainer base for easy cleaning
- All-in-one pump & switch-No float switch required
- Pump turns on when water level rises & shuts off when water is removed
- Anti-fouling impeller
- 18AWG,1 m long Leads
- 110℉ (43℃) Max
- Will not pump oil-straight motor oil that enters the bilge will not turn the pump on
TYPICAL APPLICATIONS
Marine, Medical, Pond, Water Research, etc.
DIMENSIONS
STANDARD PUMP CONFIGURATIONS
Model Flow Rate Voltage Max Draw Fuse Amps Head Wire Lead Outlet Dia N.W. / G.W. SFBP1-G1100-06 1141 GPH 12 V 6.0 A – 12.1′ (3.7 m) 3′ (1 m) 1-1/8” 0.47/0.52 kg SFBP2-G1100-06 1160 GPH 24 V 4.0 A – 12.1′ (3.7 m) 3′ (1 m) 1-1/8″ 0.47/0.52 kg PERFORMANCE
Voltage(V)Current(A)FlowHead(M)GPH LPH OPEN 3.8 1141 4318 0 12 4.2 1020 3860 0.5 12 4.53 865 3273 1 12 4.8 621 2350 1.5 12 5.04 433 1639 2 12 5.21 302 1143 2.5 12 5.53 182 689 3 12 5.81 79 299 3.5 12 6 0 0 3.7 Voltage(V)Current(A)FlowHead(M)GPH LPH OPEN 1.8 1160 4390 0 24 2.08 1033 3909 0.5 24 2.32 882 3338 1 24 2.51 654 2475 1.5 24 2.79 469 1775 2 24 3.15 334 1264 2.5 24 3.52 188 711 3 24 3.73 84 318 3.5 12 4 0 0 3.7 
.jpg)
Key Description Quantity 1 Pump Cover 1 2 Motor Bracket 1 3 Motor 2 4 Motor Oil Seal 1 5 Wearplate 1 6 Switch Assembly 1 7 Pump Housing 1 8 Impeller 1 9 Impeller Cover 1 10 Strainer 1 11 Rotor 1 12 Round Wearplate 1 13 Oil Seal 1 14 Float 1 15 Knob 1 SEAFLO 06 Series 600/750/1100GPH Seaflo Automatic Bilge Pump
SKU: BBB-MSSFBP1-G1100-06 -
Bilge Pumps, Pumps and Plumbing
SEAFLO 12V Auto Bilge Pump – 750GPH
SEAFLO 12V Auto Bilge Pump – 750GPH
Seaflo 750GPH Automatic Submersible Boat Bilge Water Pump.All-in-one pump & float switch. No additional float switch required. Pump turns on when water level rises & shuts off when water is removed.
MORE FEATURES
- 2 Year Warranty
- Snap-off strainer base for easy cleaning
- All-in-one pump & switch-No float switch required
- Pump turns on when water level rises & shuts off
- when water is removed
- Anti-fouling impeller
- 18AWG,1 m long Leads
- 110℉ (43℃) Max
- Will not pump oil-straight motor oil that enters
- the bilge will not turn the pump on
TYPICAL APPLICATIONS
Marine, Medical, Pond, Water Research, etc.
DIMENSIONS
STANDARD PUMP CONFIGURATIONS
Model Flow Rate Voltage Max Draw Fuse Amps Head Wire Lead Outlet Dia N.W. / G.W. SFBP1-G750-06 676 GPH 12 V 5.0 A 5.0 A 8.2′ (2.5 m) 3′ (1 m) 3/4″ 0.47/0.52 kg SFBP2-G750-06 660 GPH 24 V 2.9 A 3.0 A 8.2′ (2.5 m) 3′ (1 m) 3/4″ 0.47/0.52 kg PERFORMANCE
750GPH 12V Voltage(V)Current(A)FlowHead(M)GPH LPH OPEN 2.48 676 2558 0 12 3.11 545 2062 0.5 12 3.78 411 1555 1 12 4.26 284 1075 1.5 12 4.66 103 390 2 12 5 0 0 2.5 750GPH 24V Voltage(V)Current(A)FlowHead(M)GPH LPH OPEN 1.3 660 2498 0 24 1.6 533 2017 0.5 24 1.94 400 1514 1 24 2.31 263 995 1.5 24 2.54 86 325 2 24 2.9 0 0 2.5 
Key Description Quantity 1 Pump Cover 1 2 Motor Bracket 1 3 Motor 2 4 Motor Oil Seal 1 5 Wearplate 1 6 Switch Assembly 1 7 Pump Housing 1 8 Impeller 1 9 Impeller Cover 1 10 Strainer 1 11 Rotor 1 12 Round Wearplate 1 13 Oil Seal 1 14 Float 1 15 Knob 1 SKU: BBB-MSSFBP1-G750-06 -
Pumps and Plumbing
SEAFLO 3.0GPM 45PSI Water Pressure Pump
SEAFLO 3.0GPM 45PSI Water Pressure Pump
The 33-Series is our general-duty on-demand positive displacement pump. It provides reliable performance in high water flow, moderate pressure applications. This 3-chamber diaphragm pump provides up to 3.0 gallons per minute and is capable of self-priming up to 6vertical feet, and can run dry without damage. Serves 3 or more 1/2” (13 mm) outlets. This automatic demand water system pump has a built-in pressure switch, which automatically starts and stops when the faucet is opened and closed. They’re easy to install, service and winterize.
MORE FEATURES & BENEFITS
-On-demand use
-Capable of supplying1-2 fixtures
-Adjustable pressure switch
-Continuous Duty&Run dry safe– Self priming
-16AWG,4.5＂long Leads
-2 Year Warranty
– Meets or exceeds RoHS, SGS, and ISO standards.jpg)
TYPICAL APPLICATIONS
Marine,RV,Agricutural Spraying,General Industial,Filtration,Beverage Processing,Solar Water System.
PUMP Type 3 Chamber positive displacement diaphragm pump, self priming, capable of being run dry Control Type Pressure switch Max Recommended Temperature 60° C（140° F） Priming Capabilities 6 feet (1.8 m) suction lift Re-start Pressure Shut-off Pressure 45 PSI : 35 PSI ±5 PSI (±0.3 bar) Inlet/Outlet Ports 1/2″-14 MNPT Weight 4.2 lbs (1.9 kg) MOTOR Leads 16 AWG, 13″ (33 cm) long with 2-Pin connector / Leads Duty Cycle Intermittent Max.Amp Draw 8.0 A Fuse 12.0 A STANDARD PUMP CONFIGURATIONS
Model Voltage Open Flow
（GPM/LPM）Control Type Max Draw Shut-off Pressure
（PSI/BAR)Valves Diaphragm Ports Wire Connections SFDP1-030-045-33 12V 3.0 / 11.3 Switch 8.0A 45 / 3.1 EPDM Santoprene 1/2″-14 MNPT 2-Pin/Leads SFDP2-030-045-33 24V 3.0 / 11.3 Switch 4.0A 45 / 3.1 EPDM Santoprene 1/2″-14 MNPT 2-Pin/Leads PERFORMANCE
2.8 GPM PRESSURE FLOW CURRENT PSI BAR GPM LPM APMS 0 0 2.56 9.70 2.8 10 0.69 2.11 8.00 4.46 20 1.38 1.80 6.80 4.82 30 2.07 1.43 5.40 5.27 40 2.72 1.11 4.20 5.5 45 3.11 0 0 5.61 .jpg)
HEAT RISE
DIMENSIONS
.jpg)
PRODUCT DETAILS
Key Description Quantity A Pump Head Assembly 1 B Valve Assembly 1 C Diaphragm Assembly 1 D Motor Assembly 1 1 Pressure switch 1 2 Diaphragm of Pressure Switch 1 3 Pump Head 1 4 Diaphragm 1 5 Rubber Feet 1 6 Motor 1 SEAFLO 33 Series Diaphragm Pump
SKU: BBB-MSSFDP1-030-045-33 -
Pumps and Plumbing
SEAFLO 5.0GPM 60PSI Water Pressure Pump
SEAFLO 5.0GPM 60PSI Water Pressure Pump
The 51 NEW Series is our Heavy-Duty water pump. It provides high volume water flow with reduced pump cycling, thanks to the large five-chamber diaphragm. These models are designed to run on water systems with no accumulator tank necessary, and up to five fixtures! It is also suited for use with a holding tank water system, as may be found in a boat, RV or remote cabin. It provides up to 5.0 gallons per minute. The 51-Series pumps are self-priming, and can run dry without damage, performance reliable and low current. This automatic demand water system pump has a built-in pressure switch, which automatically starts and stops the pump when the faucet is opened and closed.They are easy to install service and winterize.
MORE FEATURES & BENEFITS
-Can supply up to 4 fixtures
-Precise pressure control and stable performance
-Good sealing performance,waterproof and dustproof
-Low starting pressure,reduces cycling
-Good heat dissipation-Run dry safe
-Can be use for Fresh&Salt Water
-2 Year Warranty
– Meets or exceeds RoHS, SGS, and ISO standardsTYPICAL APPLICATIONS
Marine,RV,Agricutural Spraying,General Industial,Filtration,Beverage Processing,Solar Water System.
PUMP Type 5 Chamber positive displacement diaphragm pump, self priming, capable of being run dry Control Type Pressure switch Max Recommended Temperature 60° C（140° F） Priming Capabilities 6 feet (1.8 m) suction lift Re-start Pressure Shut-on Pressure 20 PSI ：20 PSI ±3 PSI Shut-off Pressure 60 PSI ：60 PSI ±3 PSI
Inlet/Outlet Ports 1/2″-14 MNPT Weight 6.1 lbs (2.8 kg) MOTOR Leads 14 AWG, 13″ (33 cm) long with 2-Pin connector / Leads Duty Cycle Continuous Max.Amp Draw 17.0 A Fuse 25.5 A STANDARD PUMP CONFIGURATIONS
Model Voltage Open Flow
（GPM/LPM）Control Type Max Draw Shut-off Pressure
（PSI/BAR)Valves Diaphragm Ports Wire Connections SFDP1-050-060-51 NEW 12V 5.0 / 18.9 switch 15.0A 60 / 4.2 EPDM Santoprene 1/2″-14 MNPT 2-Pin/Leads PERFORMANCE
2.8 GPM PRESSURE FLOW CURRENT PSI BAR GPM LPM APMS 0 0 2.56 9.70 2.8 10 0.69 2.11 8.00 4.46 20 1.38 1.80 6.80 4.82 30 2.07 1.43 5.40 5.27 40 2.72 1.11 4.20 5.5 45 3.11 0 0 5.61 HEAT RISE
DIMENSIONS
PRODUCT DETAILS
Key Description Quantity A Pump Head Assembly 1 B Valve Assembly 1 C Diaphragm Assembly 1 D Motor Assembly 1 1 Pressure switch 1 2 Diaphragm of Pressure Switch 1 3 Pump Head 1 4 Diaphragm 1 5 Rubber Feet 1 6 Motor 1 SEAFLO 51 Series Water Pressure System
SKU: BBB-MSSFDP1-050-070-51X -
Bilge Pumps, Pumps and Plumbing
SEAFLO 500GPH Bilge Pump
SEAFLO 500GPH Bilge Pump
SEAFLO 01 Series 500GPH Seaflo Bilge Pump is a 12V Electric Marine Submersible non-automatic bilge pumps that offer water evacuation activated by a panel or float switch. Include Anti-Airlock protection and exclusive moisture-tight seals, marine grade blocked wiring. Our larger impeller design and more robust motor allow us to outperform our competitors. Our removable strainer base fits industry standard mounting conventions though, so you’ll have no problem changing to us from them.
MORE FEATURES
- 2-Year Warranty
- Meets or exceeds RoHS, SGS, and ISO standards
- Traditional operation by switch or float switch
- Entirely submersible
- Snap-off strainer base for easy maintenance
- Pump and switch are stand-alone products
- Sealed efficient, long-life motors
- Run dry capable for normal workloads
- Quiet operation
- 110°F (43°C) temperature limits
- Stainless steel shaft
- Anti-Airlock protection
- Exclusive moisture-tight seals
- Marine-grade blocked wiring
TYPICAL APPLICATIONS
Marine 20ft, Medical, Pond, Water Research, Solar Water System, etc.
.gif)
DIMENSIONS
STANDARD PUMP CONFIGURATIONS
Model Flow Rate Voltage Max Draw Fuse Amps Head Wire Lead Outlet Dia N.W. / G.W. SFBP1-G500-01 618 GPH 12 V 4.0 A 3.0 A 6.6′ (2 m) 3′ (1 m) 3/4″ 0.33/0.40 kg SFBP2-G500-01 623 GPH 24 V 3.0 A 2.0 A 6.6′ (2 m) 3′ (1 m) 3/4″ 0.33/0.40 kg PERFORMANCE
Voltage(V)Current(A)FlowHead(M)GPHLPH
OPEN
2.16
618
2339
0
12
2.58
523
1979
0.5
12
3.04
886
1461
1
12
3.62
167
632
1.5
12
4
0
0
2
Voltage(V)Current(A)FlowHead(M)GPHLPH
OPEN
1.05
623
2358
0
24
1.56
528
1998
0.5
24
2.12
399
1510
1
24
2.66
178
674
1.5
24
3
0
0
2
Key Description Quantity 1 Wire Buckle 1 2 Pump Cover 1 3 Tapping Screw 2 4 Motor Bracket 1 5 Motor 1 6 Seal Base 1 7 Seal 3 8 Motor Cover 1 9 Impeller 1 10 Pump Housing 1 11 Strainer 1 View Instruction Manual
SKU: BBB-MSSFBP1-G500-01 -
Bilge Pumps, Pumps and Plumbing
SEAFLO 750GPH Bilge Pump
SEAFLO 750GPH Bilge Pump
SEAFLO 12V Electric Marine Submersible non-automatic 750GPH bilge pumps offer water evacuation activated by a panel or float switch. Include Anti-Airlock protection and exclusive moisture tight seals,marine grade blockd wiring.Our larger impeller design and more robust motor allow us to outperform our competitors. Our removable strainer base fits industry standard mounting conventions though, so you’ll have no problem changing to us from them.
MORE FEATURES
- 2 Year Warranty
- Meets or exceeds RoHS, SGS, and ISO standards
- Traditional operation by switch or float switch
- Entirely submersible
- Snap-off strainer base for easy maintenance
- Pump and switch are stand alone products
- Sealed efficient,long life motors
- Run dry capable for normal workloads
- Quiet operation
- 110°F (43°C) temperature limits
- Stainless steel shaft
- Anti-Airlock protection
- Exclusive moisture tight seals
- Marine grade blocked wiring
TYPICAL APPLICATIONS
Marine 20ft, Medical, Pond, Water Research, Solar Water System, etc.
.gif)
DIMENSIONS
STANDARD PUMP CONFIGURATIONS
Model Flow Rate Voltage Max Draw Fuse Amps Head Wire Lead Outlet Dia N.W. / G.W. SFBP1-G750-01 675 GPH 12 V 5.0 A 5.0 A 8.2′ (2.5 m) 3′ (1 m) 3/4″ 0.33/0.40 kg SFBP2-G750-01 703 GPH 24 V 4.0 A 2.0 A 8.5′ (2.6 m) 3′ (1 m) 3/4″ 0.33/0.40 kg PERFORMANCE
Voltage(V)Current(A)FlowHead(M)GPHLPH
OPEN 2.5 675 2554 0 12 3.05 537 2032 0.5 12 3.64 377 1427 1 12 4.36 286 1082 1.5 12 4.62 145 459 2 12 5 0 0 2.5 Voltage(V)Current(A)FlowHead(M)GPHLPH
OPEN 1.27 703 2660 0 24 1.65 566 2142 0.5 24 2.42 384 1453 1 24 3.02 279 1056 1.5 24 3.52 154 583 2 24 4 0 0 2.6 PERFORMANCE
.jpg)
Key Description Quantity 1 Wire Buckle 1 2 Pump Cover 1 3 Tapping Screw 2 4 Motor Bracket 1 5 Motor 1 6 Seal Base 1 7 Seal 3 8 Motor Cover 1 9 Impeller 1 10 Pump Housing 1 11 Strainer 1 SKU: BBB-MSSFBP1-G750-01 -
Livewell Pumps, Pumps and Plumbing
SEAFLO 800GPH Baitwell / Livewell Pump – 90 Degree
SEAFLO 800GPH Baitwell / Livewell Pump – 90 Degree
Powerful low profile pump with 90 degree intake configuration. Powerful 800GPH output to suit small confined bilge and tank areas. Features ignition protected wiring plus push button cartridge removal system. Supplied complete with 3/4 inch straight and 90 degree elbow tails. 12 volt, 4Amp water cooled motor.
The Livewell / Baitwell pumps are built on SEAFLO’s unsurpassed quality and leadership in pump design and technology. The innovative design includes many new and exciting features including: a quick,one hand “push button” motor cartridge removal system and threaded nylon hose barb attachments which allow for various hose mounting options. Other features include a built-in dual port option, water-cooled housing and positive snap motor cartridge locking mechanism. Pumps are available in 350 GPH, 600 GPH and 800 GPH and are fitted for transom or seacock mounting options.
MORE FEATURES
- 2 Year Warranty
- Easy, click-in replaceable motor
- Built in through-hull
- Water-cooled motor housing
- 110°F (43°C) temperature limits
– Entirely submersible
– Run dry capable for normal workloads
– Quiet operation
– Stainless steel shaft
TYPICAL APPLICATIONS
Fishing
DIMENSIONS
STANDARD PUMP CONFIGURATIONS
Model Flow Rate Voltage Max Draw Fuse Amps Head Wire Lead Outlet Dia N.W. / G.W. SFBP1-G800-05 704 GPH 12 V 4.0 A 7.2 A 8.9′ (2.7 m) 3′ (1 m) 3/4″ 0.4/0.5 kg PERFORMANCE
Voltage(V)Current(A)FlowHead(M)GPH LPH OPEN 3.08 704 2664 0 12 3.64 623 2358 0.5 12 4.14 505 1911 1 12 4.96 271 1026 1.5 12 5.53 155 587 2 12 6.42 78 295 2.5 12 6.8 0 0 2.7 
(1).jpg)
Key Description Quantity 1 Wire Buckle 1 2 Pump Cover 1 3 Motor Bracket 1 4 Motor 1 5 Seal Base 1 6 Seal 1 1 7 Motor Cover 1 8 Seal 2 3 9 Impeller 1 10 Spring Knob 1 11 Pump Housing 1 12 90 Degree Threaded Hose 1 ① Tapping Screw 1 ② Tablet Button 1 ③ Spring 1 ④ Button 1 SKU: BBB-MSSFBP1-G800-05
.jpg)
