Bilge Pumps
Showing all 27 results
-
Bilge Pumps, Pumps and Plumbing
BILGE PUMP INSTALLATION KIT – 1 1/8″
BILGE PUMP INSTALLATION KIT – 1 1/8″
Submersible bilge pump plumbing installation kit. Suits 28mm (1 1/8″). Includes 6 feet (1.8Mtr) of 28mm cuffed hose. 1 x 1-1/8″ nylon skin fitting and 2 x 1-1/4″ x stainless steel hose clamps.
SKU: 189655 -
Bilge Pumps, Pumps and Plumbing
BILGE PUMP INSTALLATION KIT – 3/4″
BILGE PUMP INSTALLATION KIT – 3/4″
Submersible bilge pump plumbing installation kit. Suits 19mm (3/4″). Includes 6 feet (1.8Mtr) of 19mm cuffed/convulted hose. 1 x 3/4″ nylon skin fitting and 2 x 3/4″ x stainless steel hose clamps.
SKU: 189650 -
Pumps and Plumbing, Bilge Pumps
Johnson Pump 500GPH/750GPH/1000GPH/1150GPH Bilge Pump
Johnson Pump 500GPH/750GPH/1000GPH/1150GPH Bilge Pump
Popular Johnson 12 volt bilge pump. Water cooled motor, snap-off base for easy cleaning.
The compact Johnson 500gph (30lpm) submersible cartridge bilge pump are supplied with both straight and smooth 3/4″ elbow discharge ports that eliminate stress cracking caused by over-tightened hose clamps. Energy efficient, compact, all-in-one water-cooled motor/impeller units requires no tools for maintenance and boast long service intervals. Meets the international standard, ISO 8849 marine. Can be combined with an automatic float switch for automatic operation.
Our Cartridge Pumps incorporate some of the most advanced features in the industry, features developed from service in a wide variety of uses including racing, cruising, sport fishing, and demanding commercial duties.
- Limited 3 Year Warranty
- Capacities 500 GPH, 750 GPH, 1000 GPH and 1250 GPH
- Extremely energy efficient
- Water-cooled motor for long service intervals
- Compact, all-in-one motor/impeller unit with stainless steel (SS2343) shaft
- No tools needed for maintenance, no need for complete disassembly. You can now leave the pump casing attached to both the boat and the hoses.
- 500 GPH, 750 GPH, and 1000 GPH pumps have easy-to-install Dura-Port discharge ports to eliminate stress cracking caused by over-tightened hose clamps
- 500 GPH, 750 GPH, and 1000 GPH pumps are delivered including both a straight and a 90° smooth elbow Dura-Port as well as a removable check valve
- Meets the international standard, ISO 8849 marine
- Cartridge Pumps can be combined with either an automatic switch AS888, an electronic float switch or the Ultima Switch for automatic operation
Part No. Description Capacity 3 ft (0.9 m) head (13.6V/27.2V) Capacity straight (13.6V/27.2V) Voltage Amperage Fuse Size Connection Wire size 32-1450-01 
Cartridge Bilge Pump 500 GPH 12V 33 l/min – 525 GPH 40 l/min – 630 GPH 12 V 2.5 A 5 A ¾” 16 GA (1.3mm2) 32-1550-01 Cartridge Bilge Pump 750 GPH 12V 44 l/min – 700 GPH 50 l/min – 800 GPH 12 V 3 A 5 A 32-1650-01 Cartridge Bilge Pump 1000 GPH 12V 50 l/min – 800 GPH 63 l/min – 1000 GPH 12 V 3.2 A 5 A 32-1750-01* 
60 l/min – 952 GPH 73 l/min – 1150 GPH 12 V 3 A 5 A 1⅛” * Does not include Dura-Port connection DIMENSIONS
Height (A) 4.41″ (112 mm) Width (B) 3.46″ (88 mm) Width (C) 3.15″ (80 mm) Weight 0.27 kg – 9.6 oz. 500 GPH – 1000 GPH 0.32 kg – 10.4 oz. 1250 GPH 
Instruction Manual
Cartridge Bilge Pump Overview – Johnson Pump Marine
SKU: BBB-SPX32-1450-01, BBB-SPX32-1550-01, BBB-SPX32-1650-01, BBB-SPX32-1750-01 -
Pumps and Plumbing, Bilge Pumps
Johnson Pump 600/800/1000/1200GPH Automatic Bilge Pump
Johnson Pump 600/800/1000/1200GPH Automatic Bilge Pump
Popular Johnson 12 volt bilge pump with compact integrated float switch Water cooled motor, snap-off base for easy cleaning.
Sleek, reliable and compact unit with integrated patented Ultima “field effect” sensing technology switch, ready to install and run for years and years of unerring service.
- Limited 3 Year Warranty
- Compact, all-in-one unit
- Integrated Ultima Switch technology in the pump body for trouble-free, automatic operation
- Available in capacities 600 GPH, 800 GPH, 1000 GPH and 1250 GPH
- UltimaBilge 600 GPH, 800 GPH and1000 GPH pumps have easy-to-install Dura-Port discharge ports to eliminate stress cracking caused by over-tightened hose clamps
- These pumps include both a straight and a 90° smooth ¾” elbow Dura-Port
- UltimaBilge 1250 GPH includes threaded 1 1/4″ & 1 1/8″ discharge port
- All version are delivered with a removable check valve
- Voltage 12 V DC
- No Mercury
- Removable clip on basket design
- Removable impeller cover allows for easy clean out
- No tools needed for maintenance
- Extremely energy efficient
- Water-cooled motor for long service intervals
- The Ultima Bilge pumps are 3-wire device and can be run in auto or manual override mode via the bilge control panel
- Meets the international standard, ISO 8849 marine
Part No. Description Capacity 3 ft (0.9 m) head (13.6V) Capacity straight (13.6V) Voltage Amperage Fuse Size Connection 32-47258-008 Ultima Bilge 600 GPH 12V with integrated switch 32 L/min – 500 GPH 38 L/min – 600 GPH 12 V 2.5 A 5 A ¾” 32-47259-008 Ultima Bilge 800 GPH 12V with integrated switch 38 L/min – 600 GPH 51 L/min – 800 GPH 3 A 5 A ¾” 32-47260-008 
Ultima Bilge 1000 GPH 12V with integrated switch 44 L/min – 700 GPH 64 L/min – 1000 GPH 3.2 A 5 A ¾” 32-47261-005* Ultima Bilge 1250 GPH 12 V with integrated switch 51 L/min – 800 GPH 79 L/min – 1250 GPH 3 A 5 A 1⅛” and1¼” *) Does not include 1250 GPH Dura-Port connection Note: Models sold in the US are white plastic; models sold in the rest of the world are manufactured in red plastic.
DIMENSIONS
600, 800 & 1000 GPH
Length 142 mm – 6″ Width 82 mm – 3.2″ Height 105 mm – 4.1″ Weight 0.66 kg – 1.5 lb 1250 GPH
Length 142 mm – 6″ Width 82 mm – 3.2″ Height 117 mm – 4.6″ Weight 0.66 kg – 1.5 lb Instruction Manual
SKU: BBB-SPX32-47258, BBB-SPX32-47259, BBB-SPX32-47260, BBB-SPX32-47261 -
Bilge Pumps, Pumps and Plumbing
Johnson Pump Bilge Mate – 450GPH 3/4in Outlet 12V Bilge Pump (Part No.: 32-1015-01)
Bilge Pumps, Pumps and PlumbingJohnson Pump Bilge Mate – 450GPH 3/4in Outlet 12V Bilge Pump (Part No.: 32-1015-01)
Johnson Pump Bilge Mate – 450GPH 3/4in Outlet 12V Bilge Pump (Part No.: 32-1015-01)
Popular Johnson Bilge Mate 12 volt Bilge Pump. Water cooled motor, snap-off base for easy cleaning.
The compact 450gph (30lpm) submersible cartridge bilge pump with 3/4″ straight discharge port. Energy efficient (max. 2.5 A), compact, all-in-one water-cooled motor/impeller units requires no tools for maintenance and boast long service intervals
LINKS:
Johnson Pump Bilge Mate Bilge Pump Instruction Manual (428kb – click to open in new window)SKU: 32-1015-01 -
Pumps and Plumbing, Bilge Pumps
RULE 1100GHP Bilge Pump
RULE 1100GHP Bilge Pump
12 volt 1100 GPH 3.7 amp. RULE Model 27DA
Next generation compact, high capacity 1100 GPH submersible electric bilge pumps. Totally submersible pump with water cooled, ignition and TCO protected motor, stainless steel shaft and snap-on strainer base. These pumps are extremely efficient, draw low current and offer high capacity output in a very compact housing, to fit into the smallest available space. NON-Automatic pump – requires a Rule float switch to operate automatically. Please note – using the included check valve will reduce the output flow of the pump. Available in both 12 volt & 24 volt models.
3 year limited warranty.
- Fully submersible pump – 1100 US gallons per hour – 69 litres per minute
- Higher flow – optimised impeller to provide greater flow at the same amperage as previous model
- High efficiency, low amp draw ignition protected motor includes true Electromagnetic suppression (EMC)
- 16 gauge tin coated copper electrical wiring with silicone infused water blocking feature – to stop water wicking down inside the wiring
- Built-In thermal cut-out (TCO) in the motor provides additional protection for pump & vessel
- Backflow prevention – now includes a removable check valve in the discharge nozzle which reduces the amount of water draining back from the pump discharge hose into the bilge.
- Please note – using the check valve will reduce the rated output flow.
- Threaded discharge port – gives easier installation and maintenance.
- Discharge hose port is included with each pump
- Hidden air vents in the pump prevent air locking in challenging plumbing installations and helps with the check valve operation
- Compact – 112mm Height x 74mm Width x 64mm depth – not including discharge
- 3.7 amp draw @ 12v DC. 1.9 amp draw @ 24v DC
- Straight threaded hose outlets for both 25mm (1) and 28mm (1 1/8) hose
Instruction Manual
SKU: RWB0805 -
Pumps and Plumbing, Bilge Pumps
RULE 360GHP Bilge Pump
RULE 360GHP Bilge Pump
12 volt 360 GPH 2.1 amp. RULE Model 24DA
Next generation compact submersible 360 GPH electric pump for use as a bilge or bait pump on smaller craft. Totally submersible pump with water cooled, ignition and TCO protected motor, stainless steel shaft and snap-on strainer base. This pump is extremely efficient, draws low current and offers high capacity output in a very compact housing, to fit into the smallest available space. NON-Automatic pump – requires a Rule float switch to operate automatically. Please note – using the included check valve will reduce the output flow of the pump. Available in 12 volts only.
3 year limited warranty.
- Fully submersible pump – 360 US gallons per hour – 23 litres per minute @ 12v
- Higher flow – optimised impeller to provide greater flow at the same amperage as previous model
- High efficiency, low amp draw ignition protected motor includes true Electromagnetic suppression (EMC)
- 16 gauge tin coated copper electrical wiring with silicone infused water blocking feature to stop water wicking down inside the wiring
- Built-In thermal cut-out (TCO) in the motor provides additional protection for pump & vessel
- Backflow prevention – now includes a removable check valve in the discharge nozzle which reduces the amount of water draining back from the pump discharge hose into the bilge.
- Please note – using the check valve will reduce the rated output flow.
- Threaded discharge port – gives easier installation and maintenance.
- Discharge hose port is included with each pump
- Hidden air vents in the pump prevent air locking in challenging plumbing installations and helps with the check valve operation
- Compact – 99mm Height x 74mm Width x 64mm depth – not including discharge
- 2.1 amp draw @ 12v DC
- Threaded hose outlet suits 20mm (3/4″) hose. 1 x straight port provided
Instruction Manual
SKU: RWB0800 -
Pumps and Plumbing, Bilge Pumps
RULE 500GHP Bilge Pump
RULE 500GHP Bilge Pump
12 volt 500 GPH 1.6 amp. RULE Model 25DA
Next generation compact submersible 500 GPH electric pump for use as a bilge or bait pump on smaller craft. Totally submersible pump with water cooled, ignition and TCO protected motor, stainless steel shaft and snap-on strainer base. These pumps are extremely efficient, draw low current and offer high capacity output in a very compact housing, to fit into the smallest available space. NON-Automatic pump – requires a Rule float switch to operate automatically. Please note – using the included check valve will reduce the output flow of the pump. Available in both 12 volt & 24 volt models.
3 year limited warranty.
- Fully submersible pump – 500 US gallons per hour – 31 litres per minute
- Higher flow – optimised impeller to provide greater flow at the same amperage as previous model
- High efficiency, low amp draw, ignition protected motor includes true Electromagnetic suppression (EMC)
- 16 gauge tin coated copper electrical wiring with silicone infused water blocking feature to stop water wicking down inside the wiring
- Built-In thermal cut-out (TCO) in the motor provides additional protection for pump & vessel
- Backflow prevention – now includes a removable check valve in the discharge nozzle which reduces the amount of water draining back from the pump discharge hose into the bilge.
- Please note – using the check valve will reduce the rated output flow.
- Threaded discharge port – gives easier installation and maintenance.
- Discharge hose port is included with each pump
- Hidden air vents in the pump prevent air locking in challenging plumbing installations and helps with the check valve operation
- Compact – 99mm Height x 74mm Width x 64mm depth – not including discharge
- 1.6 amp draw @ 12v DC. 0.8 amp draw @ 24v DC
- Threaded hose outlet suits 20mm (3/4″) hose. 1 x straight port provided.
Instruction Manual
SKU: RWB0801 -
Pumps and Plumbing, Bilge Pumps
RULE 800GHP Bilge Pump
RULE 800GHP Bilge Pump – 12 volt 800 GPH 3.4 amp. RULE Model 20DA
water cooled, ignition and TCO protected motor, stainless steel shaft and snap-on strainer base. These pumps are extremely efficient, draw low current and offer high capacity output in a very compact housing, to fit into the smallest available space. NON-Automatic pump – requires a Rule float switch to operate automatically. Please note – using the included check valve will reduce the output flow of the pump. Available in both 12 volt & 24 volt models.
3 year limited warranty.
- Fully submersible pump – 800 US gallons per hour – 50 litres per minute
- Higher flow – optimised impeller to provide greater flow at the same amperage as previous model
- High efficiency, low amp draw, ignition protected motor includes true Electromagnetic suppression (EMC)
- 16 gauge tin coated copper electrical wiring with silicone infused water blocking feature – to stop water wicking down inside the wiring
- Built-In thermal cut-out (TCO) in the motor provides additional protection for pump & vessel
- Backflow prevention – now includes a removable check valve in the discharge nozzle which reduces the amount of water draining back from the pump discharge hose into the bilge.
- Please note – using the check valve will reduce the rated output flow.
- Threaded discharge port – gives easier installation and maintenance.
- Discharge hose port is included with each pump
- Hidden air vents in the pump prevent air locking in challenging plumbing installations and helps with the check valve operation
- Compact – 112mm Height x 74mm Width x 64mm depth – not including discharge
- 3.4 amp draw @ 12v DC. 1.7 amp draw @ 24v DC
- Threaded hose outlet suits 20mm (3/4″) hose. 1 x straight port provided
Instruction Manual
SKU: RWB0803 -
Pumps and Plumbing, Bilge Pumps
Rule IL280P – Slimline Submersible and Inline Pump 280GPH
Rule IL280P – Slimline Submersible and Inline Pump 280GPH
The Rule 280 GPH (Gallons Per Hour) In- Line Pump is a muti-purpose submersible in-line pump that can be used for water (either fresh or salt) as well as diesel. Whether you use it as a transfer pump for fuel, as a bilge, or for deck pumping requirements like a deck wash/wash down, then this heavy duty pump is incredibly reliable. The Rule name has been long associated with bilge pumps and this is with good reason. Hard wearing, heavy duty and destined for longevity, Rule pumps are built tough to deal with the rigors of a harsh marine and off-road environment. Having a reliable bilge pump can make the difference between having a minor incident on the water or a disaster; and is something that should be very strongly considered: without one it is up to you to manually bail out any water that finds its way into your boat. For the full range of pumps, hoses, fittings and clamps available at BCF call in store and talk to one of our friendly knowledgeable staff to find the product that is right for you.
- 280 GPH
- 12 volt
- Pumps fresh and seawater, diesel and anti-freeze
- Wash down for cars, vehicles, anchors and decks
- Deck shower
- Under engine bilge pumping
- Diesel refueling and transfer
- Garden watering
- Container filling and emptying
- Sink draining
- Engine winterizing
- Kits include hose, battery clips and adjustable spray nozzle (see specifications tab)
Instruction Manual
SKU: RWB0085 -
Pumps and Plumbing, Bilge Pumps, Electrical, Switches
Rule Super Switch Bilge Pump Float Switch
Rule Super Switch Bilge Pump Float Switch
RULE SuperSwitch – to 20 amp
Rule Automatic Float Switches are the world’s largest selling marine fl oat switches. They are designed to automatically activate your Non-Automatic bilge pump when water is present. They are simple, non-mercury, environmentally responsible snap switches which have been tested to over 1 million cycles. All are ignition protected, ultrasonically welded and sealed, to give reliable, troublefree service. The wiring is blocked to keep out moisture and exits the top of the switch to keep them high and dry. Different models are available to suit various pump amperage loads. No battery drain and no exposed metal to corrode.
Designed for the toughest applications and backed by a Rule 5 year warranty. Heavy duty double insulated blocked wiring and a wide, free action fl oat give superior buoyancy and performance. Removable snap-on base for easy fi tting, cleaning and servicing. The SuperSwitch is suitable for any brand of submersible bilge pump 12v – 24v – 32 volt with a maximum draw of 20 amp. It suits all models of Rule DC non-automatic pumps. Base footprint : 66 x 45mm. 135mm length x 54mm width.
Instruction Manual
Inside a Rule Float Switch
SKU: RWB0019 -
Pumps and Plumbing, Bilge Pumps, Electrical, Switches
RULE-A-MATIC Bilge Pump Float Switch
RULE-A-MATIC Bilge Pump Float Switch
RULE-A-Matic float switch – to 14 amp
Rule Automatic Float Switches are the world’s largest selling marine fl oat switches. They are designed to automatically activate your Non-Automatic bilge pump when water is present. They are simple, non-mercury, environmentally responsible snap switches which have been tested to over 1 million cycles. All are ignition protected, ultrasonically welded and sealed, to give reliable, troublefree service. The wiring is blocked to keep out moisture and exits the top of the switch to keep them high and dry. Different models are available to suit various pump amperage loads. No battery drain and no exposed metal to corrode.
This non-mercury automatic fl oat switch has set the standard for the marine industry for years. It has improved blocked wiring for greater durability and water resistance which has again raised the standard. Removable snap-on base for easy fi tting, servicing and cleaning. It is suitable for any brand of submersible bilge pump 12v – 24v – 32 volt with a maximum draw of 14 amp. It suits all Rule DC non-automatic pumps except the 3700 & 4000GPH 12v pumps. 2 year limited warranty. Base footprint : 66 x 45mm. 127mm length x 45mm width
Instruction Manual
Inside a Rule Float Switch
SKU: RWB0022 -
Pumps and Plumbing, Bilge Pumps
Rule-Mate Bilge Pump – 500/800/1100 GHP
Rule-Mate Bilge Pump – 500/800/1100 GHP
Rule-Mate bilge pumps provide ultimate pumping performance, which helps keep your bilge clear of nuisance water, building on the genuine Rule design.
Rule-Mate bilge pumps operate using an internal level sensor.
- For 500/800/1100 GPH models, when water reaches 2 inches (5 cm), the pump will automatically activate, removing water from the bilge. When the water level reaches 3/8 inches (0.9 cm) the pump will turn off until the water level rises again
- For 1500/2000 GPH models, when water reaches 2-3/4 inches (7 cm), the pump will automatically activate, removing water from the bilge. When the water level reaches 5/8 inches (1.6 cm) the pump will turn off until the water level rises again
Bilges are not always clean and free from debris. If the Rule-Mate level sensor becomes fouled by debris or contaminated water, its unique back-up feature will prevent the pump from entering a run-on condition, protecting the battery while maintaining automatic operation.
PRODUCT FEATURES
- Higher Flow — optimized impeller to provide up to 10% more flow at the same amperage as previous models with capacities from 500-2000 GPH (1893-7571 LPH)
- Auto Sense Intelligence — integral water level sensor controls the pump automatically
- Back Up Feature — prevents continuous running if sensor is fouled by debris, pump reverts to 2.5 minute cycle mode
- Smaller Footprint — 2/3 the size of previous models (500-1100 GPH models only)
- Built-In Thermal Cut-Off (TCO) — provides added protection for pump and vessel
- Back Flow Prevention — reduces the amount of water left over in the bilge, reducing odor and helping keep your bilge cleaner (500-1100 GPH models only)
- Hidden Air Vents in the Body — helps prevent air locking in challenging plumbing installations and helps with the check valve (500-1100 GPH models only)
- Threaded Discharge — easier installation, easier maintenance
Instruction Manual
Rule-Mate Bilge Pump Key Features Overview
SKU: RWB0822, RWB0824, RWB0826 -
Pumps and Plumbing, Bilge Pumps
SEAFLO 1100GPH Bilge Pump
SEAFLO 1100GPH Bilge Pump
SEAFLO non-automatic 1100GPH bilge pumps offer water evacuation activated by a panel or float switch. Include Anti-Airlock protection and exclusive moisture tight seals,marine grade blockd wiring.Our larger impeller design and more robust motor allow us to outperform our competitors. Our removable strainer base fits industry standard mounting conventions though, so you’ll have no problem changing to us from them.Availalble for DC 12 Voltage & 24 Voltage.
MORE FEATURES
- 2 Year Warranty
- Meets or exceeds RoHS, SGS, and ISO standards
- Traditional operation by switch or float switch
- Entirely submersible
- Snap-off strainer base for easy maintenance
- Pump and switch are stand alone products
- Sealed efficient,long life motors
- Run dry capable for normal workloads
- Quiet operation
- 110°F (43°C) temperature limits
- Stainless steel shaft
- Anti-Airlock protection
- Exclusive moisture tight seals
- Marine grade blocked wiring
.jpg)
TYPICAL APPLICATIONS
Marine 20ft, Medical, Pond, Water Research, Solar Water System, etc.
DIMENSIONS
STANDARD PUMP CONFIGURATIONS
Model Flow Rate Voltage Max Draw Fuse Amps Head Wire Lead Outlet Dia N.W. / G.W. SFBP1-G1100-01 1130 GPH 12 V 6.0 A 5.0 A 14.8′ (4.5 m) 3′ (1 m) 1-1/8″ 0.38/0.44 kg SFBP2-G1100-01 1120 GPH 24 V 4.0 A 3.0 A 15.7′ (4.8 m) 3′ (1 m) 1-1/8″ 0.38/0.44 kg PERFORMANCE
Voltage(V)Current(A)FlowHead(M)GPHLPH
OPEN 3.8 1130 4276 0 12 4.04 1024 3875 0.5 12 4.22 897 3394 1 12 4.48 752 2846 1.5 12 4.79 635 2403 2 12 5.06 502 1900 2.5 12 5.26 377 1427 3 12 5.53 215 814 3.5 12 5.72 106 401 4 12 6 0 0 4.5 Voltage(V)Current(A)FlowHead(M)GPHLPH
OPEN 1.3 1120 4238 0 24 1.64 995 3765 0.5 24 1.98 873 3304 1 24 2.15 745 2819 1.5 24 2.48 621 2350 2 24 2.62 489 1850 2.5 24 2.98 351 1328 3 24 3.15 186 704 3.5 24 3.48 85 322 4 24 4 0 0 4.8 PERFORMANCE
.jpg)
Key Description Quantity 1 Wire Buckle 1 2 Pump Cover 1 3 Tapping Screw 2 4 Motor Bracket 1 5 Motor 1 6 Seal Base 1 7 Seal 3 8 Motor Cover 1 9 Impeller 1 10 Pump Housing 1 11 Strainer 1 SKU: BBB-MSSFBP1-G1100-01 -
Pumps and Plumbing, Bilge Pumps
SEAFLO 12V Auto Bilge Pump – 1100GPH
SEAFLO 12V Auto Bilge Pump – 1100GPH
Seaflo 1100GPH Automatic Submersible Boat Bilge Water Pump.All-in-one pump & float switch. No additional float switch required. Pump turns on when water level rises & shuts off when water is removed.
MORE FEATURES
- 2 Year Warranty
- Snap-off strainer base for easy cleaning
- All-in-one pump & switch-No float switch required
- Pump turns on when water level rises & shuts off when water is removed
- Anti-fouling impeller
- 18AWG,1 m long Leads
- 110℉ (43℃) Max
- Will not pump oil-straight motor oil that enters the bilge will not turn the pump on
TYPICAL APPLICATIONS
Marine, Medical, Pond, Water Research, etc.
DIMENSIONS
STANDARD PUMP CONFIGURATIONS
Model Flow Rate Voltage Max Draw Fuse Amps Head Wire Lead Outlet Dia N.W. / G.W. SFBP1-G1100-06 1141 GPH 12 V 6.0 A – 12.1′ (3.7 m) 3′ (1 m) 1-1/8” 0.47/0.52 kg SFBP2-G1100-06 1160 GPH 24 V 4.0 A – 12.1′ (3.7 m) 3′ (1 m) 1-1/8″ 0.47/0.52 kg PERFORMANCE
Voltage(V)Current(A)FlowHead(M)GPH LPH OPEN 3.8 1141 4318 0 12 4.2 1020 3860 0.5 12 4.53 865 3273 1 12 4.8 621 2350 1.5 12 5.04 433 1639 2 12 5.21 302 1143 2.5 12 5.53 182 689 3 12 5.81 79 299 3.5 12 6 0 0 3.7 Voltage(V)Current(A)FlowHead(M)GPH LPH OPEN 1.8 1160 4390 0 24 2.08 1033 3909 0.5 24 2.32 882 3338 1 24 2.51 654 2475 1.5 24 2.79 469 1775 2 24 3.15 334 1264 2.5 24 3.52 188 711 3 24 3.73 84 318 3.5 12 4 0 0 3.7 
.jpg)
Key Description Quantity 1 Pump Cover 1 2 Motor Bracket 1 3 Motor 2 4 Motor Oil Seal 1 5 Wearplate 1 6 Switch Assembly 1 7 Pump Housing 1 8 Impeller 1 9 Impeller Cover 1 10 Strainer 1 11 Rotor 1 12 Round Wearplate 1 13 Oil Seal 1 14 Float 1 15 Knob 1 SEAFLO 06 Series 600/750/1100GPH Seaflo Automatic Bilge Pump
SKU: BBB-MSSFBP1-G1100-06 -
Pumps and Plumbing, Bilge Pumps
SEAFLO 12V Auto Bilge Pump – 750GPH
SEAFLO 12V Auto Bilge Pump – 750GPH
Seaflo 750GPH Automatic Submersible Boat Bilge Water Pump.All-in-one pump & float switch. No additional float switch required. Pump turns on when water level rises & shuts off when water is removed.
MORE FEATURES
- 2 Year Warranty
- Snap-off strainer base for easy cleaning
- All-in-one pump & switch-No float switch required
- Pump turns on when water level rises & shuts off
- when water is removed
- Anti-fouling impeller
- 18AWG,1 m long Leads
- 110℉ (43℃) Max
- Will not pump oil-straight motor oil that enters
- the bilge will not turn the pump on
TYPICAL APPLICATIONS
Marine, Medical, Pond, Water Research, etc.
DIMENSIONS
STANDARD PUMP CONFIGURATIONS
Model Flow Rate Voltage Max Draw Fuse Amps Head Wire Lead Outlet Dia N.W. / G.W. SFBP1-G750-06 676 GPH 12 V 5.0 A 5.0 A 8.2′ (2.5 m) 3′ (1 m) 3/4″ 0.47/0.52 kg SFBP2-G750-06 660 GPH 24 V 2.9 A 3.0 A 8.2′ (2.5 m) 3′ (1 m) 3/4″ 0.47/0.52 kg PERFORMANCE
750GPH 12V Voltage(V)Current(A)FlowHead(M)GPH LPH OPEN 2.48 676 2558 0 12 3.11 545 2062 0.5 12 3.78 411 1555 1 12 4.26 284 1075 1.5 12 4.66 103 390 2 12 5 0 0 2.5 750GPH 24V Voltage(V)Current(A)FlowHead(M)GPH LPH OPEN 1.3 660 2498 0 24 1.6 533 2017 0.5 24 1.94 400 1514 1 24 2.31 263 995 1.5 24 2.54 86 325 2 24 2.9 0 0 2.5 
Key Description Quantity 1 Pump Cover 1 2 Motor Bracket 1 3 Motor 2 4 Motor Oil Seal 1 5 Wearplate 1 6 Switch Assembly 1 7 Pump Housing 1 8 Impeller 1 9 Impeller Cover 1 10 Strainer 1 11 Rotor 1 12 Round Wearplate 1 13 Oil Seal 1 14 Float 1 15 Knob 1 SKU: BBB-MSSFBP1-G750-06 -
Pumps and Plumbing, Bilge Pumps
SEAFLO 500GPH Bilge Pump
SEAFLO 500GPH Bilge Pump
SEAFLO 01 Series 500GPH Seaflo Bilge Pump is a 12V Electric Marine Submersible non-automatic bilge pumps that offer water evacuation activated by a panel or float switch. Include Anti-Airlock protection and exclusive moisture-tight seals, marine grade blocked wiring. Our larger impeller design and more robust motor allow us to outperform our competitors. Our removable strainer base fits industry standard mounting conventions though, so you’ll have no problem changing to us from them.
MORE FEATURES
- 2-Year Warranty
- Meets or exceeds RoHS, SGS, and ISO standards
- Traditional operation by switch or float switch
- Entirely submersible
- Snap-off strainer base for easy maintenance
- Pump and switch are stand-alone products
- Sealed efficient, long-life motors
- Run dry capable for normal workloads
- Quiet operation
- 110°F (43°C) temperature limits
- Stainless steel shaft
- Anti-Airlock protection
- Exclusive moisture-tight seals
- Marine-grade blocked wiring
TYPICAL APPLICATIONS
Marine 20ft, Medical, Pond, Water Research, Solar Water System, etc.
.gif)
DIMENSIONS
STANDARD PUMP CONFIGURATIONS
Model Flow Rate Voltage Max Draw Fuse Amps Head Wire Lead Outlet Dia N.W. / G.W. SFBP1-G500-01 618 GPH 12 V 4.0 A 3.0 A 6.6′ (2 m) 3′ (1 m) 3/4″ 0.33/0.40 kg SFBP2-G500-01 623 GPH 24 V 3.0 A 2.0 A 6.6′ (2 m) 3′ (1 m) 3/4″ 0.33/0.40 kg PERFORMANCE
Voltage(V)Current(A)FlowHead(M)GPHLPH
OPEN
2.16
618
2339
0
12
2.58
523
1979
0.5
12
3.04
886
1461
1
12
3.62
167
632
1.5
12
4
0
0
2
Voltage(V)Current(A)FlowHead(M)GPHLPH
OPEN
1.05
623
2358
0
24
1.56
528
1998
0.5
24
2.12
399
1510
1
24
2.66
178
674
1.5
24
3
0
0
2
Key Description Quantity 1 Wire Buckle 1 2 Pump Cover 1 3 Tapping Screw 2 4 Motor Bracket 1 5 Motor 1 6 Seal Base 1 7 Seal 3 8 Motor Cover 1 9 Impeller 1 10 Pump Housing 1 11 Strainer 1 View Instruction Manual
SKU: BBB-MSSFBP1-G500-01 -
Pumps and Plumbing, Bilge Pumps
SEAFLO 750GPH Bilge Pump
SEAFLO 750GPH Bilge Pump
SEAFLO 12V Electric Marine Submersible non-automatic 750GPH bilge pumps offer water evacuation activated by a panel or float switch. Include Anti-Airlock protection and exclusive moisture tight seals,marine grade blockd wiring.Our larger impeller design and more robust motor allow us to outperform our competitors. Our removable strainer base fits industry standard mounting conventions though, so you’ll have no problem changing to us from them.
MORE FEATURES
- 2 Year Warranty
- Meets or exceeds RoHS, SGS, and ISO standards
- Traditional operation by switch or float switch
- Entirely submersible
- Snap-off strainer base for easy maintenance
- Pump and switch are stand alone products
- Sealed efficient,long life motors
- Run dry capable for normal workloads
- Quiet operation
- 110°F (43°C) temperature limits
- Stainless steel shaft
- Anti-Airlock protection
- Exclusive moisture tight seals
- Marine grade blocked wiring
TYPICAL APPLICATIONS
Marine 20ft, Medical, Pond, Water Research, Solar Water System, etc.
.gif)
DIMENSIONS
STANDARD PUMP CONFIGURATIONS
Model Flow Rate Voltage Max Draw Fuse Amps Head Wire Lead Outlet Dia N.W. / G.W. SFBP1-G750-01 675 GPH 12 V 5.0 A 5.0 A 8.2′ (2.5 m) 3′ (1 m) 3/4″ 0.33/0.40 kg SFBP2-G750-01 703 GPH 24 V 4.0 A 2.0 A 8.5′ (2.6 m) 3′ (1 m) 3/4″ 0.33/0.40 kg PERFORMANCE
Voltage(V)Current(A)FlowHead(M)GPHLPH
OPEN 2.5 675 2554 0 12 3.05 537 2032 0.5 12 3.64 377 1427 1 12 4.36 286 1082 1.5 12 4.62 145 459 2 12 5 0 0 2.5 Voltage(V)Current(A)FlowHead(M)GPHLPH
OPEN 1.27 703 2660 0 24 1.65 566 2142 0.5 24 2.42 384 1453 1 24 3.02 279 1056 1.5 24 3.52 154 583 2 24 4 0 0 2.6 PERFORMANCE
.jpg)
Key Description Quantity 1 Wire Buckle 1 2 Pump Cover 1 3 Tapping Screw 2 4 Motor Bracket 1 5 Motor 1 6 Seal Base 1 7 Seal 3 8 Motor Cover 1 9 Impeller 1 10 Pump Housing 1 11 Strainer 1 SKU: BBB-MSSFBP1-G750-01 -
Pumps and Plumbing, Bilge Pumps
SHURflo Bilge Pumps – 12V 1500GPH / 2000GPH
SHURflo Bilge Pumps – 12V 1500GPH / 2000GPH
• Tough nylon heavy duty housing construction.
• Patented water cooled motor ensures high performance and long life.
• Fully submersible with anti-airlock protection.
• Patented snap swivel base with 1.8m (6ft) tinned wire for easy installation.
• CE Certified, Ignition Protected ISO 8846.
• RCM Certified to Australian Standards.Part No. SAW-232104 SAW-232106 Length 184mm 184mm Width 154mm 154mm Volts 12V 12V Amps (Max) 8 Amp 10 Amp Series 1500 2000 Max. Head 14ft 18ft Outlet Dia. 1 ⅛ inch 1 ⅛ inch Head 0ft 1800 GPH (6814 LPH) 2200 GPH (8328 LPH) Head 3ft 1700 GPH (6435 LPH) 2000 GPH (7571 LPH) Head 6ft 1600 GPH (6057 LPH) 1900 GPH (7192 LPH) Installation & Maintenance Manual
SKU: SAW-232104, SAW-232106 -
Pumps and Plumbing, Bilge Pumps
SHURflo Bilge Pumps – 12V 500GPH / 700GPH / 1000GPH
SHURflo Bilge Pumps
• Fully submersible with anti-airlock protection.
• Stainless steel shaft.
• Tough nylon impeller and baseplate construction.
• Transom mount with 1.8m (6ft) tinned wire for easy installation.
• Mounting clip suits 23224 SHURflo Bilge Pump Float Switch*.
• Built in mounting.
• CE Certified, Ignition Protected ISO 8846.
• RCM Certified to Australian Standards.Part No. SAW-232100 SAW-232101 SAW-232102 Length – – – Width 74mm (C) 74mm (C) 74mm (C) Height 112mm (A) 112mm (A) 112mm (A) Depth 96mm (B) 96mm (B) 96mm (B) Volts 12V 12V 12V Amps (Max) 1.8 Amp 3.2 Amp 3.2 Amp Series 500 700 1000 Max. Head 7.5ft 10ft 11ft Outlet Dia. 3/4 inch 3/4 inch 1 ⅛ inch Head 0ft 500 GPH (1893 LPH) 700 GPH (2650 LPH) 1000 GPH (3785 LPH) Head 3ft 430 GPH (1628 LPH) 600 GPH (2271 LPH) 840 GPH (3180 LPH) Installation & Maintenance Manual
SKU: SAW-232100, SAW-232101, SAW-232102 -
Switches, Bilge Pumps, Electrical, Pumps and Plumbing
SHURflo Float Switch
SHURflo Float Switch
• Fully submersible with anti-airlock protection.
• Stainless steel shaft.
• Tough nylon impeller and baseplate construction.
• Transom mount with 1.8m (6ft) tinned wire for easy installation.
• Mounting clip suits 23224 SHURflo Bilge Pump Float Switch*.
• Built in mounting.
• CE Certified, Ignition Protected ISO 8846.
• RCM Certified to Australian Standards.Part No. SAW-23224 Length 112mm Width 92mm Height 32mm Volts 12V/24V Amps (Max) 12 Amp / 6 Amp Installation & Maintenance
SKU: SAW-23224 -
Pumps and Plumbing, Bilge Pumps, Electrical, Switches
TMC Bilge Pump Float Switch
TMC Bilge Pump Float Switch
- Automatic float switch to work with bilge pumps drawing max.20A
- Built-in micro switch without mercury.
- Can be used with DC-12V and 24V system.
- Combine with bilge pump for automatic operation.
- Float switch is made of high impact plastic, ultrasonically welded together for permanent waterproofing performance.
- Non-mercury mechanical switch.
- 85cm tinned wire, fitted with eye terminals for easy installation.
- Supplied with 2 mounting screws.
SKU: SAW-23182 -
Pumps and Plumbing, Bilge Pumps
TMC Bilge Pumps – Auto Eye Series
TMC Bilge Pumps – Auto Eye Series
TMC auto-eye series of submersible bilge pumps are equipped with built-in electronic controlled reed sensor system to make fully automatic operation easy.
No separate float switch is needed and relay loop design protect the pump against instant high current.
No power use until pump turns on when water rises.
Auto-eye pumps are built with compact, efficient, long life motor, rust and corrosion protected s.s. shaft, and high-impact durable plastic housing. quick release strainer for easy cleaning.
SKU: SAW-23197, SAW-23198, SAW-23199 -
Pumps and Plumbing, Bilge Pumps
TMC Bilge Pumps – T20 Series
TMC Bilge Pumps – T20 Series
• Fully submersible bilge pump.
• Permanent magnet motor.
• Compact design.
• Corrosion resistant plastic housing.
• Tough nylon impeller construction.
• Snap-off base strainer for easy mounting or cleaning.
• Transom mount with 0.9m (3ft) wire for easy installation.
• CE Certified: Ignition Protected ISO 8846 & Bilge Pump Std ISO 8849.SKU: SAW-23190, SAW-23192, SAW-23195, SAW-23194, SAW-23175, SAW-23177 -
Pumps and Plumbing, Bilge Pumps
TMC Compact Bilge Pumps
TMC Compact Bilge Pumps
• Fully submersible bilge pump.
• Permanent magnet motor.
• Compact design.
• Corrosion resistant plastic housing.
• Tough nylon impeller construction.
• Snap-on base strainer for easy mounting or cleaning.
• Transom mount with 0.9m (3ft) wire for easy installation.
• CE Certified: Ignition Protected ISO 8846 & Bilge Pump Std ISO 8849.Part No. SAW-23186 SAW-23189 Volts 12 12 Amps 1.5 3.5 Head 0m 450GPH (1704LPH) 900GPH (3406LPH) Head 1m 320GPH (1211LPH) 800GPH (3028LPH) Max. Head 2m 3.5m Hose Dia. 3/4 inch 1 inch Fuse 2.5A 5A Dimensions (A x B x C) 84mm x 93mm x 74mm 107mm x 129mm x 98mm Unit Qty 1 1 SKU: SAW-23186, SAW-23189 -
Pumps and Plumbing, Bilge Pumps
TMC Foot Pump TMC-70701
TMC Foot Pump
• Self-priming and double acting.
• Adjustable multi-directional inlet and outlet hose connections.
• Can be installed inside a locker space with pedal only projecting.
• CE Certified, ISO-9001 & ISO-14001.Part No. SAW-23006 Length 237mm Width 153mm Height 124mm Flow Rate 240GPH (908LPH) Hose Diameter 13mm (1/2 inch) SKU: SAW-23006 -
Pumps and Plumbing, Bilge Pumps
TMC Pump – 12V 500GPH Automatic Low Profile Bilge Pump TMC-30801
TMC Pump – 12V 500GPH Automatic Low Profile Bilge Pump TMC-30801
• Bilge pump designed for confined or tight spaces.
• Drains down as low as 10mm.
• Strainer can be rotated and cover can be removed for easy cleaning.
• Built-in reverse polarity protection.
• Built-in non-return valve to prevent back flow.
• Breath holes to prevent airlocks.
• Outlet port can be rotated for different installation purposes.
• Vertical or horizontal mounting.
• CE Certified: Ignition Protected ISO 8846 & Bilge Pump Std ISO 8849.SKU: SAW-23191
.jpg)
