Rod Holders
Showing 1–30 of 101 results
-
Boating Accessories, Rod Holders
Adjustable ABS Plastic Rod Holder (49118)
Adjustable ABS Plastic Rod Holder (49118)
• Robustly constructed rod holder with full ratchet style adjustment up/down and
side to side.
• Designed with a recess for the rod reel to sit in and a clip to lock the rod into the
rod holder.
• 4 x 5mm mounting holes.Features
Part No:49118
Description:Adjustable rod holder with side mount bracketSKU: 49118 -
Rod Holders, Boating Accessories
Adjustable Bank Stick Rod Holder
Adjustable Bank Stick Rod Holder
Simple to use adjuatable rod holder. Spiked base allows for easy insetion into sand, mud, soil etc. Adjustable geight from 450 to 800mm. Simple adjustable rod rest rotated through 90 degrees. Made from coated steel and stainless steel for long life.
SKU: BBB-SHRQGBS -
-
Boating Accessories, Bait Boards, Christmas, Rod Holders
Axis Stainless Steel Bait Board with Rod Holders
Boating Accessories, Bait Boards, Christmas, Rod HoldersAxis Stainless Steel Bait Board with Rod Holders
Axis Stainless Steel Bait Board with Rod Holders
Our framed bait boards are now reinforced with an extra strong design keeping your rods safe and secure.
Constructed from hard wearing PE plastic and high grade stainless steel.
The Framed Bait Board features a super strong frame that contains four rod holders and is also supplied with adjustable brackets that fit standard boat rod holders.
- Sink and drain hole
- Four strong rod holders
- New extra strong design for rod holder mounts
- Two adjustable rod holder fitting brackets
- Dimensions: 610 x 495mm
SKU: EJM-515202 -
Boating Accessories, Rod Holders
Bell Marine Viper Pro Series Stainless Steel Deluxe 4 Rod Rack
Bell Marine Viper Pro Series Stainless Steel Deluxe 4 Rod Rack
Viper Deluxe 4 Way Combing Rack
Sick of your lines tangling, rods getting damaged or even stood on and broken? these deluxe side mount combing rod holders simply bolt to the side of your boat, and no matter how rough it gets your rods & passengers are safe!
The Viper deluxe version has rolled bottoms to each of the holders to eliminate sharp edges against your feet.
The mounting bar is 15mm x 40mm square tube with fully welded gimble pins to stop your rods from spinning and damaging your gelcoat.
The holders also come with heavy duty end caps to protect your rod butts! The rod holders and mounting square tube are 316 Stainless Steel and are hand polished to a mirror finish.
Overall length: 500 mm
Overall height: 250mm
Distance between chimney’s/rod holder: 85 mm
SKU: BBB-BM10015 -
Boating Accessories, Rod Holders
Bluewater Rod Holder – 0° Rotating – Stainless Steel
Bluewater Rod Holder – 0° Rotating – Stainless Steel Features
- 360° rotation with locking position in 5° increments.
- Cast 316G stainless steel gear head tig welded to the rod sleeve.
- Cast 316G stainless steel base plate.
- Injection moulded polyethylene top and bottom bearing.
- Cast 316G stainless steel top cover.
- Rubber gasket.
- Tig welded stainless steel gimble pin.
- 316G stainless steel locking lever.
- Rubber locking lever cover.
- 316G stainless steel pivot pin.
- 316G stainless steel mounting hardware.
SKU: SAW-491212 -
Boating Accessories, Rod Holders
Bluewater Rod Holder – 15° Rotating – Stainless Steel
Bluewater Rod Holder – 15° Rotating – Stainless Steel Features
- 360° rotation with locking position in 5° increments.
- Cast 316G stainless steel gear head tig welded to the rod sleeve.
- Cast 316G stainless steel base plate.
- Injection moulded polyethylene top and bottom bearing.
- Cast 316G stainless steel top cover.
- Rubber gasket.
- Tig welded stainless steel gimble pin.
- 316G stainless steel locking lever.
- Rubber locking lever cover.
- 316G stainless steel pivot pin.
- 316G stainless steel mounting hardware.
SKU: SAW-491214 -
Boating Accessories, Rod Holders
Bluewater Rod Holder – 30° Rotating – Stainless Steel
Bluewater Rod Holder – 30° Rotating – Stainless Steel Features
- 360° rotation with locking position in 5° increments.
- Cast 316G stainless steel gear head tig welded to the rod sleeve.
- Cast 316G stainless steel base plate.
- Injection moulded polyethylene top and bottom bearing.
- Cast 316G stainless steel top cover.
- Rubber gasket.
- Tig welded stainless steel gimble pin.
- 316G stainless steel locking lever.
- Rubber locking lever cover.
- 316G stainless steel pivot pin.
- 316G stainless steel mounting hardware.
SKU: SAW-491216 -
Boating Accessories, Rod Holders
Bluewater Rod Holder Backing Plate – Universal
Bluewater Rod Holder backing plate Features
- 360° rotation with locking position in 5° increments.
- Cast 316G stainless steel gear head tig welded to the rod sleeve.
- Cast 316G stainless steel base plate.
- Injection moulded polyethylene top and bottom bearing.
- Cast 316G stainless steel top cover.
- Rubber gasket.
- Tig welded stainless steel gimble pin.
- 316G stainless steel locking lever.
- Rubber locking lever cover.
- 316G stainless steel pivot pin.
- 316G stainless steel mounting hardware.
SKU: SAW-491240 -
Boating Accessories, Rod Holders
CAST ALUMINIUM ROD HOLDER & BASE
CAST ALUMINIUM ROD HOLDER & BASE
High quality cast aluminium rod holder ideal for use on aluminum and fibreglass boats
Can be side mounted or rail mounted with 360 degree rotationSupplied with:
Rod holder
Side mount fitting
Rail mount fitting
4 x Stainless steel nuts, bolts and washers
Locking pinPackaging: Blister and card
SKU: BBB-SHRRH1000 -
Rod Holders, Boating Accessories, Christmas
Frank Marine 3 Way Rod Holder
Frank Marine 3 Way Rod Holder
The Frank Marine stainless steel 3 way portside / starboard rod rack will tie in with your other stainless elements. Built tough from high grade materials for those big catches Frank Marine offers a range of stainless steel accessories for the boat.
- 316 Stainless steel
- Portside mount rod hold or Starboard mount rod hold
- Vertical rotation 180 degree
- Tube diameter 32mm
SKU: FM-99080P, FM-99080S -
Boating Accessories, Rod Holders
Frank Marine Adjustable 25mm Rail Mount Tube Rod Holder
Frank Marine Adjustable 25mm Rail Mount Tube Rod Holder
Heavy duty cast rod holder bolts easily around 20-25mm O/D tube. Can be swivelled to best suit any desired rod angle.
A heavy duty 316 grade stainless steel rod holder and mount that can be adjusted to rotate through 360 degrees in both the horizontal and vertical axis.
The heavy duty cast holder is designed to accept and securely hold most common rods but also allows the rod to be quickly removed when fish strike. Each holder is mounted on a cast stainless steel base which is designed to be clamped around hand rails or rod racks manufactured from 32mm diameter tube.
The rod holder has the ability to be rotated horizontally by simply loosening the top screw. When the desired position is reached match the corresponding teeth and re-tighten for a positive lock. For vertical adjustment simply loosen the clamp screw and rotate around the mounting tube to the vertical angle required.
SKU: BBB-FM99138 -
Rod Holders, Boating Accessories, Christmas
Frank Marine Adjustable 3 Way Rod Holder
Frank Marine Adjustable 3 Way Rod Holder
The Frank Marine stainless steel adjustable 3 way portside / starboard rod racks are durable and will tie in with your other stainless elements.
This 3 way rod holder is an adjustable rod holder that can be adjusted 360 degrees horizontally and 180 degrees vertically. Frank Marine offers a range of stainless steel accessories for the boat to suit your needs
- 316 Stainless steel
- Port mount rod holder or starboard mount rod holder
- Horizontal rotation 360 degrees
- Vertical rotation 180 degrees
- Tube diameter 32mm
- 3 way adjustable
SKU: FM-99111P, FM-99111S -
Rod Holders, Boating Accessories
Frank Marine Double Wire 25mm/22mm/32mm Stainless Rail Mount Rod Holder
Rod Holders, Boating AccessoriesFrank Marine Double Wire 25mm/22mm/32mm Stainless Rail Mount Rod Holder
Frank Marine Double Wire 22mm/25mm/32mm Stainless Rail Mount Rod Holder
Wire rod holder bolts easily around 22mm/25mm/32mm O/D tube. Can be swiveled to best suit any desired rod angle.
A heavy duty 316 grade stainless steel rod holder and mount that can be adjusted to rotate through 360 degrees in both the horizontal and vertical axis.
The bent holder is designed to accept and securely hold most common rods and allows the rod to be quickly removed when fish strike. Each holder is mounted on a cast stainless steel base which is designed to be clamped around hand rails or rod racks manufactured from 22mm/25mm/32mm diameter tubes.
The rod holder has the ability to be rotated horizontally by simply loosening the top screw. When the desired position is reached match the corresponding teeth and re-tighten for a positive lock. For vertical adjustment simply loosen the clamp screw and rotate around the mounting tube to the vertical angle required.
SKU: BBB-FM99270, BBB-FM99117, BBB-FM99136 -
Boating Accessories, Rod Holders
Heavy Duty Cast Oval Head Angled Flush Mount Rod Holder (49126)
Heavy Duty Cast Oval Head Angled Flush Mount Rod Holder (49126)
• Heavy duty cast 316G stainless steel top.
• Fully welded shaft and solid gimbal pin through shaft.
• 30⁰ angle shaft.
• 3 x 6mm countersunk holes.
• Mounting gasket and liner.Features:
Part No: 49126
Description: Rod holder – Heavy Duty with Cap
Head Size (mm): 86 x 112
Length (mm): 197
Cut Hole (mm): 53
Shaft ID (mm): 43SKU: 49126 -
Boating Accessories, Rod Holders
Heavy Duty Cast Round Head Flush Mount Rod Holder – 30 Degree Angle (49122)
Boating Accessories, Rod HoldersHeavy Duty Cast Round Head Flush Mount Rod Holder – 30 Degree Angle (49122)
Heavy Duty Cast Round Head Flush Mount Rod Holder – 30 Degree Angle (49122)
• Heavy Duty holder with white PVC liner.
• 30 Degree Angle or Straight.
• 316G Casting stainless steel top.
• 50mm 304G Polished Stainless Steel Tube.
• Stainless rod gimbal pin through shaft.
• Closed bottom with 16mm tube drain tail.
• 3 x 6mm countersunk mounting holes.Features:
Part No: 49122
Description: Rod Holder 30 degree Angle
Head Size (mm): 102
Length (mm): 200
Cut Hole (mm): 52
Shaft ID (mm): 45
Mount Holes (mm): 6SKU: 49122 -
Boating Accessories, Rod Holders
Heavy Duty Cast Round Head Flush Mount Rod Holder – Straight (49121)
Boating Accessories, Rod HoldersHeavy Duty Cast Round Head Flush Mount Rod Holder – Straight (49121)
Heavy Duty Cast Round Head Flush Mount Rod Holder – Straight (49121)
• Heavy Duty holder with white PVC liner.
• 30 Degree Angle or Straight.
• 316G Casting stainless steel top.
• 50mm 304G Polished Stainless Steel Tube.
• Stainless rod gimbal pin through shaft.
• Closed bottom with 16mm tube drain tail.
• 3 x 6mm countersunk mounting holes.Features:
Part No: 49121
Description: Rod Holder – Straight
Head Size (mm): 102
Length (mm): 200
Cut Hole (mm): 52
Shaft ID (mm): 45
Mount Holes (mm): 6SKU: 49121 -
Boating Accessories, Rod Holders
Hookem Rod Holder Extension
S/S Rod Holder Extension
S/S Rod Holder Extension is a high quality, 316 grade Stainless Steel angled >Gimbal lock rod holder extension. You could call it the >Outrigger you have when you don’t have an outrigger!!
It enables the rod to be easily extended and angled over the side or Stern of the Boat, but is also useful where only straight rod holders have been installed. It will lock into most standard Stainless Steel rod holders with a bore size of 38mm or larger.
40mm I.D bore at top. Extends 450mm past top of rod holder that it is inserted into.
SKU: REH025 -
Boating Accessories, Christmas, Rod Holders
OCEANSOUTH 3 Rod Rack / 4 Rod Rack
OCEANSOUTH 3 Rod Rack / 4 Rod Rack – Rod Racks Stainless Steel
The Oceansouth 4 Way Rod Combing Rack is the ultimate solution for organizing and storing fishing rods. Made from durable 316 stainless steel, this rod holder storage system is built to withstand the harsh marine environment and provide long-lasting performance.
The 316 stainless steel construction not only enhances the rack’s durability but also provides excellent corrosion resistance, making it ideal for saltwater environments. This ensures that your valuable fishing rods are protected from the corrosive effects of saltwater, ensuring their longevity and maintaining their performance over time.
Installation of the 4 Way or 3 Way rod Combing Rack is straightforward, thanks to its versatile design. It can be easily mounted on a variety of surfaces, including gunwales, transoms, or even on the deck of your boat.
Whether you’re a professional angler or a recreational fishing enthusiast, the Oceansouth 4 Way Rod Combing Rack offers a practical and reliable storage solution for your fishing rods. With its sturdy construction, convenient design and excellent resistance to corrosion, this stainless steel rod holder storage system is a must-have accessory for any fishing adventure. Keep your rods organized, protected and ready for action with the Oceansouth 4 Way Rod Combing Rack.
- Full length Polypropylene liner, protects rod handles
- Solid construction – no moving parts
- Gimble pin rod stop
- Rounded top and bottom edges
- Racks can be teamed together for multiply rod storage
- Convenient storage for Rods on your boat, patio or garage
- Two mount points
DESCRIPTION ORDER CODE Rod rack of 3 MA 101-1 Rod rack of 4 MA 101-2 SKU: MA 101-1, MA 101-2 -
Bimini Tops and T-Tops, Christmas, Rod Holders
OCEANSOUTH Clamp On Alloy Rocket Launcher Kit
OCEANSOUTH Clamp On Alloy Rocket Launcher Kit
The Oceansouth Clamp-On Fishing Rod Holder/Rocket Launcher is an essential accessory for any fishing enthusiast. Designed to provide convenience and efficiency, this versatile rod holder allows you to secure and organize up to six fishing rods simultaneously.
Crafted with high-quality materials, the Oceansouth Clamp-On Fishing Rod Holder/Rocket Launcher ensures durability and long-lasting performance even in challenging marine environments. The holder features a sturdy and adjustable clamp mechanism, allowing it to be easily attached to a variety of surfaces. This versatility ensures that you can use it wherever your fishing adventures take you.
Whether you’re trolling for big game fish, angling for freshwater species, or simply enjoying a relaxing day on the water, the Oceansouth Clamp-On Fishing Rod Holder/Rocket Launcher is an indispensable tool for any angler. Its robust construction, user-friendly design and capacity to accommodate multiple rods make it an excellent choice for both seasoned fishermen and beginners alike. Invest in this reliable and efficient rod holder to enhance your fishing experience and make every outing a success.
- 6 Hi-Impact noncorrosive polymer rod holders- metallic finish
- Alloy double knuckle clamp secures the Launcher firmly to your bimini
- Can be trimmed to suit your Bimini up to 1.9m in canopy width
- Crossbars can be shortened to suit your bimini width
MAx. WIDTH ORDER CODE 1.9m MA 110 Instructions
SKU: MA 110 -
Boating Accessories, Rod Holders
OCEANSOUTH Fold Down Alloy Rocket Launcher Kit
OCEANSOUTH Fold Down Alloy Rocket Launcher Kit
The Oceansouth Australia Fishing Rod Holder Overhead Rack Rocket Launcher is a durable and versatile solution for boat owners looking to securely store and organize up to six fishing rods. Crafted from high-quality materials, it can withstand the marine environment’s harsh conditions, ensuring long-lasting use. Its overhead rack design maximizes storage space on your boat, keeping rods organized and out of the way, reducing clutter and potential accidents. Installation is quick and easy, making it a practical choice for anglers of all levels to keep their fishing rods safe, organized, and accessible during their adventures on the water.
In summary, the Oceansouth Australia Fishing Rod Holder Overhead Rack Rocket Launcher is a reliable and convenient storage solution for fishing enthusiasts, offering durability, functionality, and easy installation to enhance your boating experience.
NOTE: Optional Rail Mounts can be used to mount the Fishing Rod Rack on rails
SKU: MA 100 -
Boating Accessories, Rod Holders
Plastic Flush Mount Rod Holder – Large Oval Head 30 Degree Angle – Black (49222)
Boating Accessories, Rod HoldersPlastic Flush Mount Rod Holder – Large Oval Head 30 Degree Angle – Black (49222)
Plastic Flush Mount Rod Holder – Large Oval Head 30 Degree Angle – Black (49222)
• Robust premium quality, UV stabilised with large, heavy duty oval shaped head,
plastic flush mount rod holders.
• Moulded gimbal in base.
• 3x5mm mounting holes.Features
Part No: 49222
Description: Black Plastic Rod Holder Oval 300 Angled Shaft
Head Size (mm): 105×85
Length(mm): 250
Cut Hole(mm): 50
Shaft ID(mm): 43SKU: 49222 -
Boating Accessories, Rod Holders
Plastic Flush Mount Rod Holder – Large Oval Head 30 Degree Angle – White (49220)
Boating Accessories, Rod HoldersPlastic Flush Mount Rod Holder – Large Oval Head 30 Degree Angle – White (49220)
Plastic Flush Mount Rod Holder – Large Oval Head 30 Degree Angle – White (49220)
• Robust premium quality, UV stabilised with large, heavy duty oval shaped head,
plastic flush mount rod holders.
• Moulded gimbal in base.
• 3x5mm mounting holes.Features
Part No:49220
Description:White Plastic Rod Holder Oval 30 Angled Shaft
Head Size (mm):105×85
Length(mm):250
Cut Hole(mm):50
Shaft ID(mm):43SKU: 49220 -
Boating Accessories, Rod Holders
Plastic Flush Mount Rod Holder with Slimline Head 30 Degree Angle – Black (49206)
Boating Accessories, Rod HoldersPlastic Flush Mount Rod Holder with Slimline Head 30 Degree Angle – Black (49206)
Plastic Flush Mount Rod Holder with Slimline Head 30 Degree Angle – Black (49206)
• Robust premium quality, UV stabilised, narrow head plastic flush mount rod holders with moulded gimbal in base.
• Rectangular Top Plate.
• Mounting holes 4 x 4mm.Features:
Part No: 49206
Description: Black 30o Angled Shaft Rod Holder Rectangular Top Plate
Head Size (mm): 88 x 60
Length (mm): 240
Cut Hole (mm): 52
Shaft ID (mm): 43SKU: 49206