Switches
Showing 1–30 of 106 results
-
Electrical, Switches
Battery Box With Master Switch (115105)
Battery Box With Master Switch (115105)
Sturdy black plastic battery boxes fitted with Marinco® BEP 701 mini battery master switch, 500 mm length of 200 amp tinned wiring and marine quality battery terminals.
Features:
BLA Code : 115105
Inside Length mm : 265
Inside Width mm : 180
Inside Height mm : 210
Outside Height mm : 272
Mount Screws mm : 4 c/sSKU: 115105 -
Electrical, Switches
Battery Selector Switch – Alt Field Disconnect (114298)
Battery Selector Switch – Alt Field Disconnect (114298)
- Voltage: 6-32V DC
- Continuous Rating: 250 amps
- Intermittent Rating: 360 amps
Features:
BLA Code: 114298
Base Size mm: 140
Overall Depth mm: 73
Mount Screws mm: 5 r/h
Terminal Stud mm: 8
Alt. Field Stud mm: 3SKU: 114298 -
Electrical, Switches
Battery Selector Switch – With Key (114296)
Battery Selector Switch – With Key (114296)
- Voltage: 6-32V DC
- Continuous Rating: 250 amps DC
- Intermittent Rating: 360 amps DC
Features:
BLA Code: 114296
Base Dia. mm: 134
Cut Out Dia. mm: 96
Overall Depth mm: 70
Mount Screws mm: 5 r/h
Terminal Stud mm: 8SKU: 114296 -
Electrical, Switches
Battery Selector Switch (114294)
Battery Selector Switch (114294)
- Voltage: 6-32V DC
- Continuous Rating: 250amps DC
- Intermittent Rating: 360amp DC
Features:
BLA Code: 114294
Base Dia. mm: 134
Cut Out Dia. mm: 96
Overall Depth mm: 70
Mount Screws mm: 5 r/h
Terminal Stud mm: 8SKU: 114294 -
-
Electrical, Switches
Battery Switch – Weatherproof (114314)
Battery Switch – Weatherproof (114314)
Key type, on/off switch with removable plastic key for security. Key and switch are both fitted with weatherproof boots. All brass electrical contacts. Engines must be shut down before turning to ‘off’ position. Suitable for 12 or 24 volt. Rated maximum load, 500 amps for ten seconds. Overall length includes key.
Features:
BLA Code: 114314
Base Dia. mm: 65
Overall Length mm: 102
Stem Length mm: 33
Stem Dia. mm: 23
Mount Screws mm: 6 r/h
Terminal Stud mm: 10SKU: 114314 -
Electrical, Switches
Battery Switch (114308)
Battery Switch (114308)
Simple key type, two position switch with insulated black plastic housing, red removable plastic key and all brass electrical contacts. Suitable for 12 or 24 volt. Unit may be surface mounted or partially recessed behind the panel with just the stem protruding. Engines must be shut down before turning to ‘off’ position. Rated maximum load, 500 amps for ten seconds. Overall length includes key.
Features:
BLA Code: 114308
Base Dia. mm: 65
Overall Length mm: 102
Stem Length mm: 33
Stem Dia. mm: 23
Mount Screws mm: 6 r/h
Terminal Stud mm: 10SKU: 114308 -
Electrical, Switches
Bilge Pump Control Panel – With Alarm (114032)
Bilge Pump Control Panel – With Alarm (114032)
Black finished aluminium panel with three position switch, fuse and audible and visual alarm function. Used to control any submersible bilge pump up to 10amp current draw, fitted with a float switch. Switch has manual/off/auto positions with spring return to off from the manual position. Red indicator light and audible alarm activates if bilge pump fails when in auto mode. A green light shows when operating correctly. Suitable for 12 volt DC applications only.
Features:
BLA Code: 114032
Width mm: 115
Height mm: 64
Cut Out mm: 85×40
Intrusion mm: 40
Mount Screws mm: 3 r/hSKU: 114032 -
Electrical, Switches
Bilge Pump Control Panel (114030)
Bilge Pump Control Panel (114030)
Three position switch – manual/off/auto – to control electric submersible bilge pumps in conjunction with float switches. Features red and green indicator lights. Black finished alloy face with white graphics. Screw top fuse holder. Supplied with 5 amp fuse. Suitable for 12 volt applications only.
Features:
BLA Code: 114030
Width mm: 90
Height mm: 50
Cut Out mm: 74×36
Intrusion mm: 40
Mount Screws mm: 3 r/hSKU: 114030 -
Electrical, Switches
Marinco® BEP ‘Contour’ Circuit Breaker Panels – No Meters (113140)
Marinco® BEP ‘Contour’ Circuit Breaker Panels – No Meters (113140)
- Durable grey powder coated marine grade aluminium base panel
- Marine quality, magnetic, hydraulic, UL listed trip free breakers
- Backlit labels supplied, refer page 101
- Suitable size negative busbar supplied, refer page 124
- Red LED indication for circuits ‘on’
- Green LED back lighting for meters and labels
- Double pole configurations available for survey or additional safety
Features:
BLA Code: 113140
Circuits: 4
Overall Size wxh mm: 127×115
Cut Out Size wxh mm: 107×95
Intrusion mm: 65
Mount Screws Gauge: 6 r/h
Power Volt: 12-24
Label Sheet: 1
Circuit Breakers:
5 amp – 1
10 amp – 2
15 amp – 1SKU: 113140 -
Electrical, Switches
Marinco® BEP ‘Contour’ Circuit Breaker Panels – No Meters (113142)
Marinco® BEP ‘Contour’ Circuit Breaker Panels – No Meters (113142)
- Durable grey powder coated marine grade aluminium base panel
- Marine quality, magnetic, hydraulic, UL listed trip free breakers
- Backlit labels supplied, refer page 101
- Suitable size negative busbar supplied, refer page 124
- Red LED indication for circuits ‘on’
- Green LED back lighting for meters and labels
- Double pole configurations available for survey or additional safety
Features:
BLA Code: 113142
Circuits: 8
Overall Size wxh mm: 127×200
Cut Out Size wxh mm: 107×180
Intrusion mm: 65
Mount Screws Gauge: 6 r/h
Power Volt: 12-24
Label Sheet: 1
Circuit Breakers:
5 amp – 2
10 amp – 2
15 amp – 3
20 amp – 1SKU: 113142 -
Electrical, Switches
Marinco® BEP ‘Contour’ Circuit Breaker Panels – No Meters (113144)
Marinco® BEP ‘Contour’ Circuit Breaker Panels – No Meters (113144)
- Durable grey powder coated marine grade aluminium base panel
- Marine quality, magnetic, hydraulic, UL listed trip free breakers
- Backlit labels supplied, refer page 101
- Suitable size negative busbar supplied, refer page 124
- Red LED indication for circuits ‘on’
- Green LED back lighting for meters and labels
- Double pole configurations available for survey or additional safety
Features:
BLA Code: 113144
Circuits: 8
Overall Size wxh mm: 239×115
Cut Out Size wxh mm: 219×95
Intrusion mm: 65
Mount Screws Gauge: 6 r/h
Power Volt: 12-24
Label Sheet: 1
Circuit Breakers:
5 amp – 2
10 amp – 2
15 amp – 3
20 amp – 1SKU: 113144 -
Electrical, Switches
Marinco® BEP ‘Contour’ Circuit Breaker Panels – No Meters (113151)
Marinco® BEP ‘Contour’ Circuit Breaker Panels – No Meters (113151)
- Durable grey powder coated marine grade aluminium base panel
- Marine quality, magnetic, hydraulic, UL listed trip free breakers
- Backlit labels supplied, refer page 101
- Suitable size negative busbar supplied, refer page 124
- Red LED indication for circuits ‘on’
- Green LED back lighting for meters and labels
- Double pole configurations available for survey or additional safety
Features:
BLA Code: 113151
Circuits: 12
Overall Size wxh mm: 351×115
Cut Out Size wxh mm: 331×95
Intrusion mm: 65
Mount Screws Gauge: 6 r/h
Power Volt: 12-24
Label Sheet: 1
Circuit Breakers:
5 amp – 3
10 amp – 4
15 amp – 4
25 amp – 1SKU: 113151 -
Electrical, Switches
Marinco® BEP ‘Contour’ Circuit Breaker Panels – No Meters (113152)
Marinco® BEP ‘Contour’ Circuit Breaker Panels – No Meters (113152)
- Durable grey powder coated marine grade aluminium base panel
- Marine quality, magnetic, hydraulic, UL listed trip free breakers
- Backlit labels supplied, refer page 101
- Suitable size negative busbar supplied, refer page 124
- Red LED indication for circuits ‘on’
- Green LED back lighting for meters and labels
- Double pole configurations available for survey or additional safety
Features:
BLA Code: 113152
Circuits: 12
Overall Size wxh mm: 239×200
Cut Out Size wxh mm: 219×180
Intrusion mm: 65
Mount Screws Gauge: 6 r/h
Power Volt: 12-24
Label Sheet: 1
Circuit Breakers:
5 amp – 3
10 amp – 4
15 amp – 4
25 amp – 1SKU: 113152 -
Electrical, Switches
Marinco® BEP ‘Contour’ Circuit Breaker Panels – No Meters (113153)
Marinco® BEP ‘Contour’ Circuit Breaker Panels – No Meters (113153)
- Durable grey powder coated marine grade aluminium base panel
- Marine quality, magnetic, hydraulic, UL listed trip free breakers
- Backlit labels supplied, refer page 101
- Suitable size negative busbar supplied, refer page 124
- Red LED indication for circuits ‘on’
- Green LED back lighting for meters and labels
- Double pole configurations available for survey or additional safety
Features:
BLA Code: 113153
Circuits: 12
Overall Size wxh mm: 127×285
Cut Out Size wxh mm: 107×265
Intrusion mm: 65
Mount Screws Gauge: 6 r/h
Power Volt: 12-24
Label Sheet: 1
Circuit Breakers:
5 amp – 3
10 amp – 4
15 amp – 4
25 amp – 1SKU: 113153 -
Electrical, Switches
Marinco® BEP Battery Distribution Cluster with DVSR – Single Engine Two Battery Banks (113654)
Electrical, SwitchesMarinco® BEP Battery Distribution Cluster with DVSR – Single Engine Two Battery Banks (113654)
Marinco® BEP Battery Distribution Cluster with DVSR – Single Engine Two Battery Banks (113654)
Pre-wired module combining 113553 Mini Battery Selector Switch and a dual sensing Voltage Sensitive Relay. With the selector switch in position 1, it becomes the sensing battery for the VSR. When the engine is first started the relay is open and remains open until the selected battery reaches a preset 13.4 volt. The relay closes at the rated voltage providing charge to both batteries. When the selected battery voltage drops below 12.8 volt, the DVSR disengages, separating the batteries and ensuring that battery 1 is not discharged by house loads. When the selector switch is in position 2, this becomes the sensing battery and the reciprocal occurs. When the selector switch is in the both position the DVSR is inactive and the charge and load is distributed evenly between the batteries. With this system the loads are run off the same battery as the engine starting battery.
Features:
BLA Code: 113654
Base mm: 138×69
Height mm: 69
Mount Holes mm: 5 r/hSKU: 113654 -
Electrical, Switches
Marinco® BEP Contour Battery Master Switch – Surface and Panel Mount (113548)
Marinco® BEP Contour Battery Master Switch – Surface and Panel Mount (113548)
The 701 Contour Battery Master Switch is a simple on/off switch which offers a number of unique features. The contour lock system allows it to be a stand alone unit or locked together with other switches. The 701 also features a control knob which cannot be removed whilst in the on or off position, however can be removed by switching to an anti-theft position. Interchangeable labelling system on the control knob allows a full range of applications. Switches come standard with the battery symbol label. Alternative label sets 113690 and 113691 are available. Removable rear cover insulates the rear terminals against any short circuits and ensures the switch meets ABYC requirements. Removable side plates on 4 sides provide access for heavy duty battery cables. Surface mount or recess mount in a 52mm hole. Screw holes 5mm roundhead. Ignition protected. Non-corrosive construction.
Features:
BLA Code: 113548
Mounting Type: Panel
Continuous rating: 275 amps DC
Intermittent rating: 455 amps DC
Cranking rating: 1250 amps DC for 10 seconds
Voltage rating: 48 volts DC maximum
Terminal stud size: 2 x 10mm
Moulded in high temperature, fibre-reinforced plasticsSKU: 113548 -
Electrical, Switches
Marinco® BEP Contour Battery Master Switch – Surface and Panel Mount (113550)
Marinco® BEP Contour Battery Master Switch – Surface and Panel Mount (113550)
The 701 Contour Battery Master Switch is a simple on/off switch which offers a number of unique features. The contour lock system allows it to be a stand alone unit or locked together with other switches. The 701 also features a control knob which cannot be removed whilst in the on or off position, however can be removed by switching to an anti-theft position. Interchangeable labelling system on the control knob allows a full range of applications. Switches come standard with the battery symbol label. Alternative label sets 113690 and 113691 are available. Removable rear cover insulates the rear terminals against any short circuits and ensures the switch meets ABYC requirements. Removable side plates on 4 sides provide access for heavy duty battery cables. Surface mount or recess mount in a 52mm hole. Screw holes 5mm roundhead. Ignition protected. Non-corrosive construction.
Features:
BLA Code: 113550
Mounting Type: Surface
Continuous rating: 275 amps DC
Intermittent rating: 455 amps DC
Cranking rating: 1250 amps DC for 10 seconds
Voltage rating: 48 volts DC maximum
Terminal stud size: 2 x 10mm
Moulded in high temperature, fibre-reinforced plasticsSKU: 113550 -
Electrical, Switches
Marinco® BEP Contour Exterior Switches (113302)
Marinco® BEP Contour Exterior Switches (113302)
Replicating the same lines as the Contour interior switches, these exterior switches complement the décor of modern boat exteriors. The contour switch can be surface, recessed, vertical or horizontal mounted. The switches have a backlit label with systems on indicator. On/off and on/off/on switches are three pin. Momentary switches are two pin and spring return to off position. Supplied with symbol label set. Suitable for horizontal or vertical mounting. Supplied with 10 piece, symbol label set. Dimensions 60(l) x 30(w) x 18(h) mm (single), 90(l) x 30(w) x 18(h) mm (double). Switch current rating: 10amp 12VDC.
Features:
BLA Code: 113302
Colour: Black
Style: Single
Switch: On/offSKU: 113302 -
Electrical, Switches
Marinco® BEP Contour Exterior Switches (113305)
Marinco® BEP Contour Exterior Switches (113305)
Replicating the same lines as the Contour interior switches, these exterior switches complement the décor of modern boat exteriors. The contour switch can be surface, recessed, vertical or horizontal mounted. The switches have a backlit label with systems on indicator. On/off and on/off/on switches are three pin. Momentary switches are two pin and spring return to off position. Supplied with symbol label set. Suitable for horizontal or vertical mounting. Supplied with 10 piece, symbol label set. Dimensions 60(l) x 30(w) x 18(h) mm (single), 90(l) x 30(w) x 18(h) mm (double). Switch current rating: 10amp 12VDC.
Features:
BLA Code: 113305
Colour: Black
Style: Double
Switch: On/offSKU: 113305 -
Electrical, Switches
Marinco® BEP Contour Generation 2 Splash Proof Switch Panels (113756)
Marinco® BEP Contour Generation 2 Splash Proof Switch Panels (113756)
Injection moulded plastic panel with modern contour styling. The switch tray features a rubber mounting gasket and integral cover seal. The cover includes a clear plastic membrane with rubber over-mould allowing the flexibility to operate the switches while providing a clear window for label backlighting. Red LED indicates systems on. Both grey and blue interchangeable contour wave strips are included and custom colours are available, subject to minimum quantities. Mounting screws are bidden beneath the cover. Panels can be mounted horizontally or vertically due to the unique label design. A joiner is available for multiple panel installations. Available in 2, 4 or 6 gang versions with a choice of grey or white facia and with or without fuses. Fused versions have each pair of switches connected to a behind panel mounted AF type blade fuse holder. Supplied as standard with two position, on/off switches and 113694, 28 piece label set. Three position switches, momentary switches and label set 113695 (below) are also available. Suitable for 12 or 24 volt systems. Switches rated to 16 amp. Overall width 63mm. Cut out width 42mm. Intrusion 25mm. Mount screws 3mm roundhead.
Features:
BLA Code: 113756
Facia Colour: Black
Gang: 2
Fuses: No
Overall Length mm: 71
Cut Out Length mm: 36SKU: 113756 -
Electrical, Switches
Marinco® BEP Contour Generation 2 Splash Proof Switch Panels (113757)
Marinco® BEP Contour Generation 2 Splash Proof Switch Panels (113757)
Injection moulded plastic panel with modern contour styling. The switch tray features a rubber mounting gasket and integral cover seal. The cover includes a clear plastic membrane with rubber over-mould allowing the flexibility to operate the switches while providing a clear window for label backlighting. Red LED indicates systems on. Both grey and blue interchangeable contour wave strips are included and custom colours are available, subject to minimum quantities. Mounting screws are bidden beneath the cover. Panels can be mounted horizontally or vertically due to the unique label design. A joiner is available for multiple panel installations. Available in 2, 4 or 6 gang versions with a choice of grey or white facia and with or without fuses. Fused versions have each pair of switches connected to a behind panel mounted AF type blade fuse holder. Supplied as standard with two position, on/off switches and 113694, 28 piece label set. Three position switches, momentary switches and label set 113695 (below) are also available. Suitable for 12 or 24 volt systems. Switches rated to 16 amp. Overall width 63mm. Cut out width 42mm. Intrusion 25mm. Mount screws 3mm roundhead.
Features:
BLA Code: 113757
Facia Colour: White
Gang: 2
Fuses: No
Overall Length mm: 71
Cut Out Length mm: 36SKU: 113757 -
Electrical, Switches
Marinco® BEP Contour Generation 2 Splash Proof Switch Panels (113761)
Marinco® BEP Contour Generation 2 Splash Proof Switch Panels (113761)
Injection moulded plastic panel with modern contour styling. The switch tray features a rubber mounting gasket and integral cover seal. The cover includes a clear plastic membrane with rubber over-mould allowing the flexibility to operate the switches while providing a clear window for label backlighting. Red LED indicates systems on. Both grey and blue interchangeable contour wave strips are included and custom colours are available, subject to minimum quantities. Mounting screws are bidden beneath the cover. Panels can be mounted horizontally or vertically due to the unique label design. A joiner is available for multiple panel installations. Available in 2, 4 or 6 gang versions with a choice of grey or white facia and with or without fuses. Fused versions have each pair of switches connected to a behind panel mounted AF type blade fuse holder. Supplied as standard with two position, on/off switches and 113694, 28 piece label set. Three position switches, momentary switches and label set 113695 (below) are also available. Suitable for 12 or 24 volt systems. Switches rated to 16 amp. Overall width 63mm. Cut out width 42mm. Intrusion 25mm. Mount screws 3mm roundhead.
Features:
BLA Code: 113761
Facia Colour: Black
Gang: 2
Fuses: Yes
Overall Length mm: 71
Cut Out Length mm: 36SKU: 113761 -
Electrical, Switches
Marinco® BEP Contour Generation 2 Splash Proof Switch Panels (113762)
Marinco® BEP Contour Generation 2 Splash Proof Switch Panels (113762)
Injection moulded plastic panel with modern contour styling. The switch tray features a rubber mounting gasket and integral cover seal. The cover includes a clear plastic membrane with rubber over-mould allowing the flexibility to operate the switches while providing a clear window for label backlighting. Red LED indicates systems on. Both grey and blue interchangeable contour wave strips are included and custom colours are available, subject to minimum quantities. Mounting screws are bidden beneath the cover. Panels can be mounted horizontally or vertically due to the unique label design. A joiner is available for multiple panel installations. Available in 2, 4 or 6 gang versions with a choice of grey or white facia and with or without fuses. Fused versions have each pair of switches connected to a behind panel mounted AF type blade fuse holder. Supplied as standard with two position, on/off switches and 113694, 28 piece label set. Three position switches, momentary switches and label set 113695 (below) are also available. Suitable for 12 or 24 volt systems. Switches rated to 16 amp. Overall width 63mm. Cut out width 42mm. Intrusion 25mm. Mount screws 3mm roundhead.
Features:
BLA Code: 113762
Facia Colour: White
Gang: 2
Fuses: Yes
Overall Length mm: 71
Cut Out Length mm: 36SKU: 113762 -
Electrical, Switches
Marinco® BEP Contour Generation 2 Splash Proof Switch Panels (113766)
Marinco® BEP Contour Generation 2 Splash Proof Switch Panels (113766)
Injection moulded plastic panel with modern contour styling. The switch tray features a rubber mounting gasket and integral cover seal. The cover includes a clear plastic membrane with rubber over-mould allowing the flexibility to operate the switches while providing a clear window for label backlighting. Red LED indicates systems on. Both grey and blue interchangeable contour wave strips are included and custom colours are available, subject to minimum quantities. Mounting screws are bidden beneath the cover. Panels can be mounted horizontally or vertically due to the unique label design. A joiner is available for multiple panel installations. Available in 2, 4 or 6 gang versions with a choice of grey or white facia and with or without fuses. Fused versions have each pair of switches connected to a behind panel mounted AF type blade fuse holder. Supplied as standard with two position, on/off switches and 113694, 28 piece label set. Three position switches, momentary switches and label set 113695 (below) are also available. Suitable for 12 or 24 volt systems. Switches rated to 16 amp. Overall width 63mm. Cut out width 42mm. Intrusion 25mm. Mount screws 3mm roundhead.
Features:
BLA Code: 113766
Facia Colour: Black
Gang: 4
Fuses: No
Overall Length mm: 119
Cut Out Length mm: 84SKU: 113766 -
Electrical, Switches
Marinco® BEP Contour Generation 2 Splash Proof Switch Panels (113767)
Marinco® BEP Contour Generation 2 Splash Proof Switch Panels (113767)
Injection moulded plastic panel with modern contour styling. The switch tray features a rubber mounting gasket and integral cover seal. The cover includes a clear plastic membrane with rubber over-mould allowing the flexibility to operate the switches while providing a clear window for label backlighting. Red LED indicates systems on. Both grey and blue interchangeable contour wave strips are included and custom colours are available, subject to minimum quantities. Mounting screws are bidden beneath the cover. Panels can be mounted horizontally or vertically due to the unique label design. A joiner is available for multiple panel installations. Available in 2, 4 or 6 gang versions with a choice of grey or white facia and with or without fuses. Fused versions have each pair of switches connected to a behind panel mounted AF type blade fuse holder. Supplied as standard with two position, on/off switches and 113694, 28 piece label set. Three position switches, momentary switches and label set 113695 (below) are also available. Suitable for 12 or 24 volt systems. Switches rated to 16 amp. Overall width 63mm. Cut out width 42mm. Intrusion 25mm. Mount screws 3mm roundhead.
Features:
BLA Code: 113767
Facia Colour: White
Gang: 4
Fuses: No
Overall Length mm: 119
Cut Out Length mm: 84SKU: 113767 -
Electrical, Switches
Marinco® BEP Contour Generation 2 Splash Proof Switch Panels (113771)
Marinco® BEP Contour Generation 2 Splash Proof Switch Panels (113771)
Injection moulded plastic panel with modern contour styling. The switch tray features a rubber mounting gasket and integral cover seal. The cover includes a clear plastic membrane with rubber over-mould allowing the flexibility to operate the switches while providing a clear window for label backlighting. Red LED indicates systems on. Both grey and blue interchangeable contour wave strips are included and custom colours are available, subject to minimum quantities. Mounting screws are bidden beneath the cover. Panels can be mounted horizontally or vertically due to the unique label design. A joiner is available for multiple panel installations. Available in 2, 4 or 6 gang versions with a choice of grey or white facia and with or without fuses. Fused versions have each pair of switches connected to a behind panel mounted AF type blade fuse holder. Supplied as standard with two position, on/off switches and 113694, 28 piece label set. Three position switches, momentary switches and label set 113695 (below) are also available. Suitable for 12 or 24 volt systems. Switches rated to 16 amp. Overall width 63mm. Cut out width 42mm. Intrusion 25mm. Mount screws 3mm roundhead.
Features:
BLA Code: 113771
Facia Colour: Black
Gang: 4
Fuses: Yes
Overall Length mm: 119
Cut Out Length mm: 84SKU: 113771 -
Electrical, Switches
Marinco® BEP Contour Generation 2 Splash Proof Switch Panels (113772)
Marinco® BEP Contour Generation 2 Splash Proof Switch Panels (113772)
Injection moulded plastic panel with modern contour styling. The switch tray features a rubber mounting gasket and integral cover seal. The cover includes a clear plastic membrane with rubber over-mould allowing the flexibility to operate the switches while providing a clear window for label backlighting. Red LED indicates systems on. Both grey and blue interchangeable contour wave strips are included and custom colours are available, subject to minimum quantities. Mounting screws are bidden beneath the cover. Panels can be mounted horizontally or vertically due to the unique label design. A joiner is available for multiple panel installations. Available in 2, 4 or 6 gang versions with a choice of grey or white facia and with or without fuses. Fused versions have each pair of switches connected to a behind panel mounted AF type blade fuse holder. Supplied as standard with two position, on/off switches and 113694, 28 piece label set. Three position switches, momentary switches and label set 113695 (below) are also available. Suitable for 12 or 24 volt systems. Switches rated to 16 amp. Overall width 63mm. Cut out width 42mm. Intrusion 25mm. Mount screws 3mm roundhead.
Features:
BLA Code: 113772
Facia Colour: White
Gang: 4
Fuses: Yes
Overall Length mm: 119
Cut Out Length mm: 84SKU: 113772 -
Electrical, Switches
Marinco® BEP Contour Generation 2 Splash Proof Switch Panels (113776)
Marinco® BEP Contour Generation 2 Splash Proof Switch Panels (113776)
Injection moulded plastic panel with modern contour styling. The switch tray features a rubber mounting gasket and integral cover seal. The cover includes a clear plastic membrane with rubber over-mould allowing the flexibility to operate the switches while providing a clear window for label backlighting. Red LED indicates systems on. Both grey and blue interchangeable contour wave strips are included and custom colours are available, subject to minimum quantities. Mounting screws are bidden beneath the cover. Panels can be mounted horizontally or vertically due to the unique label design. A joiner is available for multiple panel installations. Available in 2, 4 or 6 gang versions with a choice of grey or white facia and with or without fuses. Fused versions have each pair of switches connected to a behind panel mounted AF type blade fuse holder. Supplied as standard with two position, on/off switches and 113694, 28 piece label set. Three position switches, momentary switches and label set 113695 (below) are also available. Suitable for 12 or 24 volt systems. Switches rated to 16 amp. Overall width 63mm. Cut out width 42mm. Intrusion 25mm. Mount screws 3mm roundhead.
Features:
BLA Code: 113776
Facia Colour: Black
Gang: 6
Fuses: No
Overall Length mm: 167
Cut Out Length mm: 132SKU: 113776 -
Electrical, Switches
Marinco® BEP Contour Generation 2 Splash Proof Switch Panels (113777)
Marinco® BEP Contour Generation 2 Splash Proof Switch Panels (113777)
Injection moulded plastic panel with modern contour styling. The switch tray features a rubber mounting gasket and integral cover seal. The cover includes a clear plastic membrane with rubber over-mould allowing the flexibility to operate the switches while providing a clear window for label backlighting. Red LED indicates systems on. Both grey and blue interchangeable contour wave strips are included and custom colours are available, subject to minimum quantities. Mounting screws are bidden beneath the cover. Panels can be mounted horizontally or vertically due to the unique label design. A joiner is available for multiple panel installations. Available in 2, 4 or 6 gang versions with a choice of grey or white facia and with or without fuses. Fused versions have each pair of switches connected to a behind panel mounted AF type blade fuse holder. Supplied as standard with two position, on/off switches and 113694, 28 piece label set. Three position switches, momentary switches and label set 113695 (below) are also available. Suitable for 12 or 24 volt systems. Switches rated to 16 amp. Overall width 63mm. Cut out width 42mm. Intrusion 25mm. Mount screws 3mm roundhead.
Features:
BLA Code: 113777
Facia Colour: White
Gang: 6
Fuses: No
Overall Length mm: 167
Cut Out Length mm: 132SKU: 113777
