Garmin AA Battery Pack
Ensure you have back-up power1 when and where you need it. This spare battery pack requires 3 AA batteries (lithium batteries recommended; not included).
Ensure you have back-up power1 when and where you need it. This spare battery pack requires 3 AA batteries (lithium batteries recommended; not included).
Garmin Marine Heading Sensor Cable to Connect Marine Heading Sensor to NMEA 2000 Network [Garmin Part Number: 010-11419-00] – RRP $1290
Connect a heading sensor to a NMEA 2000 network with this 19.7 ft (6 m) cable.
THIS IS SUITABLE FOR CURRENT MODEL GARMIN GMR 18 xHD RADOME & GMR 24 xHD RADOME.
WHAT’S IN THE BOX:
* Garmin Marine Heading Sensor Cable – NMEA 2000
* Documentation
WARRANTY:
We are an authorised Australian Garmin retailer, as such Full Australian Manufacturers Warranty is applicable for this item. Please note if a Garmin unit is purchased overseas or from a non-authorised Garmin retailer you may not receive warranty coverage in Australia.
*Specifications from suppliers’ information.
Garmin Stainless Steel Transducer Spray Shield [Garmin Part Number: 010-01055-00]
The Garmin spray shield is designed to reduce excess water spray from transducers when the vessel is running at high speeds. Can be retro fitted to a wide range of common Garmin transom mounted transducers. The plate is simply fitted between the plastic transducer housing and the transom mount bracket. Supplied complete with stainless steel mount fixtures and washers.
COMPATABLE UNITS & TRANSDUCERS:
* echoMAP™ 45dv
* echoMAP™ 55dv
* echoMAP™ 75dv
* echoMAP™ 75sv
* echoMAP™ 95sv
* echoMAP™ CHIRP 45dv
* echoMAP™ CHIRP 55dv
* echoMAP™ CHIRP 75dv
* echoMAP™ CHIRP 75sv
* echoMAP™ CHIRP 95sv
* Garmin GT20-TM – Transom Mount DownVü 500 W (CHIRP 455/800 kHz) Traditional 500 W (77/200 kHz) Transducer with Temp (8-pin)
* Garmin GT21-TM – Transom Mount DownVü 500 W (CHIRP 260/455 kHz) Traditional 600 W (50/200 kHz) Transducer with Temp (8-pin)
* Garmin GT30-TM – Transom Mount DownVü/SideVü 500 W (CHIRP 455/800 kHz) Scanning Transducer with Temp (12-pin)
* Garmin GT40-TM – Transom Mount DownVü/SideVü 500 W (CHIRP 455/800 kHz) Traditional 500 W (77/200 kHz) Transducer with Temp (12-pin)
* Garmin GT41-TM – Transom Mount DownVü/SideVü 500 W (CHIRP 260/455 kHz) Traditional 600 W (50/200 kHz) Transducer with Temp (12-pin)
* Garmin GT50M-TM – Transom Mount DownVü/SideVü 500 W (CHIRP 455/800 kHz) Traditional 300 W (Mid-band CHIRP 80-160 kHz) Transducer with Temp (12-pin)
* Garmin GT51M-TM – Transom Mount DownVü/SideVü 500 W (CHIRP 260/455 kHz) Traditional 600 W (Mid-band CHIRP 80-160 kHz) Transducer with Temp (12-Pin)
*Specifications from suppliers’ information.
Minn Kota 3m Wiring Loom/Harness for Electric Motor to Suit Minn Kota & Other Electric Motors
BLA Code: 602996
Wiring Harness for Electric Motor to Suit Minn Kota & Other Electric Motors
CADCO wiring looms are available in 3m (this listing) and 6m lengths and are made with 10mm quality marine grade tinned copper wire, a 50 amp circuit breaker, an Anderson plug kit and all terminals attached. The wiring is protected in a loom tube for neat installation.
Available in popular three and six metre lengths ready for installation these looms are manufactured using quality materials and fittings. Each cable features 10mm marine grade tinned copper wire, quality 50 amp BEP resettable circuit breaker, Anderson plug kit and fixed terminals.
For safety, protection, ease of installation and neatness each loom is supplied encased in black flame retardant corrugated conduit.
Note: For the installation of 24 volt motors the purchase of one 113676 300mm flexible terminal link is required (please see related products), allowing the connection from one batteries positive to the others negative. Full instructions with simple to follow pictures is included for easy installation.
Garmin Marine Heading Sensor for Radar [Garmin Part Number: 010-11417-00] – RRP $1200
When interfacing this 3-axis compass heading sensor to our marine lineup of MFDs and radars, mariners can expect unparalleled radar overlay performance and accuracy along with excellent MARPA capabilities.
This heading sensor (based on Airmar H2183) uses a rate gyro, so it can maintain an exceptional 2 degree heading accuracy under heavy dynamic conditions, with up to 30 degrees of pitch and roll. In addition, it supports either NMEA 0183 or NMEA 2000® data output to fit any installation.
Installation is a snap thanks to the heading sensor’s innovative design, allowing it to mount to any angled bulkhead. Mariners can expect this heading sensor to provide trouble-free service in the harshest conditions and will learn to appreciate its reliability and excellent performance.
* Note: NMEA 0183 and NMEA 2000 cables sold separately (to connect to a NMEA 2000 Network a dedicated NMEA 2000 Marine Heading Sensor Cable is required Garmin Part Number: 010-11419-00 – optional, please see related products).
THIS IS SUITABLE FOR CURRENT MODEL GARMIN GMR 18 xHD RADOME & GMR 24 xHD RADOME.
FEATURES:
* Better than 1 degree static heading accuracy
* Industry leading 2 degree dynamic accuracy up to 30 degree pitch and roll
* Three-axis solid-state compass provides accurate heading data
* Three-axis accelerometer improves heading, pitch and roll in static conditions
* Three-axis rate gyro improves heading, pitch and roll in dynamic conditions
* Temperature compensated across the entire operating range to ensure optimum accuracy
* Easy installation to any angled bulkhead
* Auto-calibration feature
SPECIFICATIONS:
* Dimensions (HxLxD): 2″ (5.08 cm) x 4.4″ (11.18 cm) x 4.5″ (11.43 cm)
* Default heading output: 10 Hz for both NMEA 0183 and NMEA 2000 (NMEA 2000 can be output up to 20 Hz)
* Waterproof housing: IPX6
* Operating voltage: 9 VDC to 16 VDC
WHAT’S IN THE BOX:
* Garmin Marine Heading Sensor
* Documentation
WARRANTY:
We are an authorised Australian Garmin retailer, as such Full Australian Manufacturers Warranty is applicable for this item. Please note if a Garmin unit is purchased overseas or from a non-authorised Garmin retailer you may not receive warranty coverage in Australia.
*Specifications from suppliers’ information.