Anchors
Showing 31–46 of 46 results
-
Anchoring and Mooring, Anchors
Rocna Anchor – Stainless Steel
Rocna Anchor – Stainless Steel
Stainless steel Rocna anchors were designed by New Zealand sailor Peter Smith, who has been designing, building, and sailing boats since the early 1960’s. Over 100,000 nautical miles of cruising, Peter experienced the same anchoring problems that are still prevalent today – needing to carry a variety of anchors to suit various seabeds, yet still the anchors dragged and boaters felt insecure.
“Your anchor should provide you and your crew with reliability, security, and confidence,” says Peter. A lifetime of nautical experience worldwide was poured into an anchor – initially conceived for Peter’s own use – which became the Rocna.
Refer to the Rocna Anchor sizing guide to ensure you get the correct anchor for your boat.
AN INDEPENDENTLY TESTED NEW GENERATION DESIGN
Peter’s solution consistently returns top results in objective and independent testing. Since its launch in 2004, the Rocna has led worldwide anchor tests as published in the likes of SAIL, Yachting Monthly, Practical Boat Owner, Voile, and others. Because of the Rocna’s reliable and convincing performance against its competition, Rocna is trusted to be rock solid in the real world. You don’t need to take our word for it.
FOR ALL WHO NEED RELIABILITY FROM PERFORMANCE
Rocna anchors are performing in some of the world’s toughest locales, including Patagonia, Antarctica, Alaska, Greenland, Scotland – as well as enduring temperamental tropical weather. Rocna has “buy-in” from respected boaters whose opinions matter, from Steve Dashew to Jimmy Cornell. Southern lattitudes sailing pioneer Jérôme Poncet reports: “It took me years with many trials to achieve, in discovering the Rocna anchor, foolproof holding power…”
PRECISION SETTING
The roll-bar (A) ensures that the anchor always arrives at the ideal angle for penetration, and the setting skids (B) guide the fluke tip (C) which acts as a sharp chisel cutting into the seabed. With a third of the anchor’s weight on its fluke tip, an instant reliable set is ensured with every use.
ROCK SOLID HOLDING POWER
Of all anchor types, a concave fluke (D) gives the greatest resistance, and through clever design Rocna provides the largest fluke area possible. In very soft seabeds, this provides the holding power to secure your boat. On hard or weedy sea floors, Rocna’s chisel tip (C) ensures that it cuts through and bites deep.
MAXIMUM VERSATILITY
The Rocna is a true multi-purpose anchor that sets and holds in most seabeds, from soft mud to hard sand, clay, grass, and kelp.
RESISTANT TO WIND AND TIDE SHIFTS
A Rocna remains stable and buried, and does not roll out on reversal or veering of load, or if dragged beyond yield, providing enhanced security.
HIGHEST QUALITY BUILD AND FINISH
Compare the welds and finish on a genuine Rocna anchor to alternatives. We believe a top performing product should be built like one, and we spend a lot of time and resources on production and quality control procedures to ensure that this is the case.
HIGH TENSILE STEEL SHANK (E)
Rocna anchors are designed – and built – for strength and durability.
SELF-DEPLOYING AND SELF-RECOVERING
The Rocna shank is designed so the anchor self-launches and self-stows on the majority of bow-rollers, with the greatest possible reliability.
GUARANTEED FOR LIFE
Each Rocna anchor comes with a Lifetime Warranty against both breakage and bending in addition to manufacturing defects.
PART NUMBER SIZE SUITS BOAT LENGTH (REFER TO SIZING GUIDE) FLUKE AREA RECOMENDED G40 CHAIN ROC-ROCNA4SS 4kg 4-7m 460cm2 6mm (1/4″) ROC-ROCNA6SS 6kg 5-9m 590cm2 6mm (1/4″) ROC-ROCNA10SS 10kg 7-11m 795cm2 7mm (1/4″) ROC-ROCNA15SS 15kg 8-14m 1030cm2 8mm (5/16″) ROC-ROCNA20SS 20kg 9-16m 1140cm2 9mm (5/16″) ROC-ROCNA25SS 25kg 10-18m 1415cm2 10mm (3/8″) ROC-ROCNA33SS 33kg 12-22m 1695cm2 10mm (3/8″) ROC-ROCNA40SS 40kg 14-24m 1945cm2 11mm (7/16″) ROC-ROCNA55SS 55kg 16-26m 2300cm2 12mm (7/16″) ROC-ROCNA70SS 70kg 18-28m 2690cm2 14mm (1/2″) ROC-ROCNA110SS 110kg 20m+ (please enquire) 3330cm2 16mm (5/8″) ROC-ROCNA150SS* 150kg 20m+ (please enquire) 4470cm2 Please enquire ROC-ROCNA200SS* 200kg 20m+ (please enquire) 5560cm2 Please enquire ROC-ROCNA275SS* 275kg 20m+ (please enquire) 6510cm2 Please enquire * Please call for price & availability on Rocna 150Kg + sizes
SKU: ROC-ROCNA4SS, ROC-ROCNA6SS, ROC-ROCNA10SS, ROC-ROCNA15SS, ROC-ROCNA20SS, ROC-ROCNA25SS, ROC-ROCNA33SS, ROC-ROCNA40SS, ROC-ROCNA55SS, ROC-ROCNA70SS, ROC-ROCNA110SS, ROC-ROCNA150SS, ROC-ROCNA200SS, ROC-ROCNA275SS -
Anchoring and Mooring, Anchors
SARCA Galvanised Anchor – Super
SARCA Galvanised Anchor – Super
You won’t find the Super SARCA Anchor at BCF! The story of the SARCA boat anchor (Sand and Reef Combination anchor) started with a range of discoveries and innovations that came from the work shop of Australian Rex Francis. Rex developed the SARCA anchor over a six year period with the aid of feedback from commercial fisherman and boaties alike.
The feedback from these industries trialling the SARCA anchor was vital to the success of this new revolutionary multi purpose anchor design. SARCA was a worlds first as a purposed designed combination anchor. In 1997 the SARCA was released in Australia and then some five years later released in New Zealand, SARCA has now become one of the most popular anchor designs sold in many countries.
Rex went on to manufacture large SARCA anchors anchoring vessels up to 300 hundred tons. Super SARCA Anchors are designed and manufactured in Australia, Sarca’s build quality assured using the best steels then hot-dipped galvanized.
Super SARCA’s unique design makes it both safer and easier to use.
The penetrating ability and holding power of the Super SARCA has to be experienced to be believed.
PART NUMBER SIZE BOAT LENGTH SUITS APPROX. BOAT WEIGHT WEIGHT LENGTH TO BOW (A) INTERNAL HEIGHT (B) LENGTH ON DECK (C) MINIMUM SUGGESTED CHAIN SAR-AGALSIZE05 0.5 Up to 3.8m 200kg 3.0kg 125mm 125mm 330mm 3m of 8mm chain SAR-AGALSIZE1 1 3.8-4.5m 500kg 4.0kg 145mm 165mm 375mm 4m of 8mm chain SAR-AGALSIZE2 2 4.5-6m 1.5 ton 6.0kg 152mm 175mm 403mm 5m of 8mm chain SAR-AGALSIZE3 3 6.0-7.5m 1.5-2.0 ton 9.0kg 165mm 185mm 445mm 6m of 8mm chain SAR-AGALSIZE4 4 7.5-9m 2.0-3.5 ton 13.5kg 185mm 200mm 480mm 7m of 8mm chain SAR-AGALSIZE5 5 9-10m 3.5-5 ton 15.5kg 205mm 225mm 520mm 9m of 10mm chain SAR-AGALSIZE6 6 10-12m 5-11 ton 22.0kg 210mm 225mm 550mm 11m of 10mm chain SAR-AGALSIZE7 7 12-14m 11-16 ton 25.0kg 300mm 260mm 560mm 13m of 12mm chain SAR-AGALSIZE8 8 14-18m 16-26 ton 34.5kg 300mm 260mm 640mm 15m of 12mm chain SAR-AGALSIZE9 9 18-20m 26-34 ton 41.5kg 315mm 250mm 730mm 20m of 12mm chain SAR-AGALSIZE11 11 20-22m 34-40 ton 60.5kg 390mm 310mm 750mm 25m of 14mm chain SAR-AGALSIZE13 13 22-25m 40-60 ton 74.0kg 390mm 310mm 750mm 30m of 14mm chain SAR-AGALSIZE15 15 TBA TBA 150.0kg 525mm 400mm 855mm TBA SKU: SAR-AGALSIZE05, SAR-AGALSIZE1, SAR-AGALSIZE2, SAR-AGALSIZE3, SAR-AGALSIZE4, SAR-AGALSIZE5, SAR-AGALSIZE6, SAR-AGALSIZE7, SAR-AGALSIZE8, SAR-AGALSIZE9, SAR-AGALSIZE11, SAR-AGALSIZE13, SAR-AGALSIZE15 -
Anchoring and Mooring, Anchors
Savwinch Delta Style Anchors – Stainless Steel & Galvansied
Savwinch Delta Style Anchors – Stainless Steel & Galvansied
Classic Delta design styled anchor ideal for most seabed types. Fast setting and self launching for ease of use.
SKU: 146500, 146504, 146510, 146512, 146514, 146516 -
Anchoring and Mooring, Anchors
SAW Anchor – Delta Stainless Steel
SAW Anchor – Delta Stainless Steel
Delta Style Stainless Steel Anchor features;
- Low centre of gravity and unique shape ensures that it always positions correctly and sets instantly.
- Hole for a retrieval line at the front.
Note: Extra hole for improved retrieval using a trip line.
PART NUMBER WEIGHT APPROX. BOAT LENGTH LENGTH (A) WIDTH (B) DEPTH (C) SHANK (D) EYE (E) EYE (F) SAW-12034 5kg (11lb) 5m 550mm 240mm 210mm 410mm 35 x 12mm 11mm SAW-12035 7.5kg (16.5lb) 7m 610mm 240mm 250mm 420mm 35 x 16mm 14mm SAW-12036 10kg (22lb) 9m 650mm 290mm 275mm 450mm 35 x 16mm 16mm SKU: SAW-12034, SAW-12035, SAW-12036 -
-
Anchoring and Mooring, Anchors
SAW Anchor – Folding Grapnel
SAW Anchor – Folding Grapnel
• Fold easily for storage & include a locking collar at open and closed positions.
• Ideal for inflatable boats, jet skis and kayaks as they are compact and there are no sharp edges.
• Fitted with retrieval eye for easy removal if snagged.
• Hot dipped galvanised.PART NUMBER WEIGHT LENGTH (A) CLOSE WIDTH (B1) OPEN WIDTH (B2) EYE (C) RETRIEVAL EYE (D) SAW-12014 0.7kg (1.5lb) 173mm 58mm 162mm 7mm 6mm SAW-12015 1.5kg (3lb) 310mm 70mm 290mm 12mm 8mm SAW-12025 2.5kg (6lb) 380mm 85mm 320mm 12mm 8mm SAW-12032 3.2kg (7lb) 420mm 100mm 360mm 12mm 11mm SAW-12033 8.0kg (18lb) 600mm 130mm 535mm 16mm 16mm SAW-12040 4.0kg (9lb) 450mm 110mm 410mm 12mm 12mm SKU: SAW-12014, SAW-12015, SAW-12025, SAW-12032, SAW-12033, SAW-12040 -
Anchoring and Mooring, Anchors
SAW Anchor – Mooloolaba Pick
SAW Anchor – Mooloolaba Pick
• Best suited to reef and rocky seabeds.
• Easy to retrieve design.
• Solid construction with heavy duty rigid prongs.
• Hot dipped galvanised.PART NUMBER WEIGHT LENGTH (A) WIDTH (B) APPROX. BOAT LENGTH FLUKE (D) RETRIEVAL EYE (E) EYE (F) SAW-12300 1.8kg (4lb) 495mm 175mm 3m – 4m 220mm 18mm 18mm SAW-12302 4kg (9lb) 570mm 220mm 4m – 5.5m 250mm 25mm 25mm SAW-12304 7kg (16lb) 705mm 255mm 5.5m – 7m 295mm 30mm 30mm SAW-12306 9kg (20lb) 810mm 260mm 7m – 9m 300mm 32mm 32mm SAW-12308 11kg (24lb) 875mm 265mm 9m – 11m 295mm 35mm 35mm SAW-12310 13.5kg (30lb) 960mm 270mm 11m – 13m 275mm 38mm 38mm SKU: SAW-12300, SAW-12302, SAW-12304, SAW-12306, SAW-12308, SAW-12310 -
Anchoring and Mooring, Anchors
SAW Anchor – Sand Anchor
SAW Anchor – Sand Anchor
• Best suited to soft seabeds.
• Ideal in sand.
• Stores flat.
• Eye in head to connect retrieval line.
• Hot dipped galvanised.PART NUMBER WEIGHT LENGTH (A) WIDTH (B) FLUKE (E) EYE (F) DEPTH (C) SHANK (D) SUITS BOAT LENGTH (APPROX) SAW-12003 1.5kg (3lb) 415mm 300mm 220mm 12mm 110mm 390mm 2.5m SAW-12004 2kg (4lb) 360mm 350mm 220mm 14mm 110mm 410mm 3m SAW-12006 2.5kg (6lb) 400mm 285mm 220mm 11mm 100mm 410mm 4m SAW-12008 4kg (8lb) 515mm 345mm 250mm 14mm 130mm 410mm 5m SAW-12010 5kg (10lb) 595mm 450mm 270mm 14mm 130mm 450mm 6m SAW-12013 6kg (13lb) 660mm 450mm 315mm 18mm 145mm 555mm 7m SAW-12016 7kg (16lb) 600mm 410mm 350mm 15mm 150mm 500mm 8m SAW-12017 10kg (22lb) 685mm 480mm 340mm 17mm 170mm 570mm 9m SAW-12018 12kg (27lb) 695mm 485mm 380mm 15mm 170mm 610mm 10m SAW-12019 15.9kg (35lb) 790mm 510mm 405mm 15mm 220mm 670mm 11m SKU: SAW-12003, SAW-12004, SAW-12006, SAW-12008, SAW-12010, SAW-12013, SAW-12016, SAW-12017, SAW-12018, SAW-12019 -
Anchoring and Mooring, Anchors
SAW Anchor Kit – Folding Grapnel
SAW Anchor Kit – Folding Grapnel
• Perfect compact size for pwc, kayaks and small tenders.
• Anchor folds for convenient storage with rope and chain in bag supplied.
• Anchor locks open for use and closed when stored.Kits Include:
• 1.5kg (46058) or 3.2kg (46057) galvanised anchor.
• 1m x 6mm short link galvanized chain.
• 8mm silver rope and with stainless steel thimble.
• 2 x 6mm galvanised bow shackles.
• Storage bag.PART NUMBER WEIGHT ROPE DIA ROPE LENGTH CHAIN DIA CHAIN LENGTH SHACKLES SAW-46057 3.2kg (7.1lb) 8mm 30m 6mm 1m 6mm SAW-46058 1.5kg (3.3lb) 8mm 20m 6mm 1m 6mm SKU: SAW-46057, SAW-46058 -
Anchoring and Mooring, Anchors
SAW Anchor Kit – Galvanised Sand Anchor Kit
SAW Anchor Kit – Galvanised Sand Anchor Kit
Complete sand anchor kit for your boat. Sand anchors are suitable for sand or mud situations where the anchor can sink into the surface bottom to hold the boat. Sand anchors fold flat for easy storage when not in use.
Kit Contains:
- 1 x Sand anchor
- 1 x 2mtr Galvanised chain
- 1 x 50mtr Silver anchor rope
- 2 x Galvanised shackles
Note that it is important to use the correct type and size of anchor for the conditions and your particular boat. The information below is provided as a guide only.
PART NUMBER WEIGHT APPROX. BOAT LENGTH ROPE LENGTH ROPE DIA CHAIN LENGTH CHAIN DIA SHACKLES SAW-46070 1.8kg (4lb) 3m 50m 6mm 2m 6mm 6mm SAW-46075 2.7kg (6lb) 4m 50m 6mm 2m 6mm 6mm SAW-46075-6 2.7kg (6lb) 4m 50m 6mm 2m 6mm 6mm SAW-46080 3.6kg (8lb) 5m 50m 8mm 2m 6mm 8mm SAW-46080-6 3.6kg (8lb) 5m 50m 8mm 2m 6mm 8mm SAW-46085 4.5kg (10lb) 6m 50m 10mm 2m 8mm 8mm SAW-46085-6 4.5kg (10lb) 6m 50m 10mm 2m 8mm 8mm SAW-46090 5.9kg (13lb) 7m 50m 10mm 2m 8mm 10mm SKU: SAW-46070, SAW-46075, SAW-46075-6, SAW-46080, SAW-46080-6, SAW-46085, SAW-46085-6, SAW-46090 -
Anchoring and Mooring, Anchors
SAW Anchor Kit – Reef Heavy Duty
SAW Anchor Kit – Reef Heavy Duty
• Complete reef anchor kit with storage bag.
• Solid anchor shaft, facilitates faster sinking.
• Prongs welded to shaft.Kit Contains:
1 x 4 or 5 Prong Heavy Duty Reef Anchor.
1 x 2mtr Galvanised Chain.
1 x 50mtr of Silver Anchor Rope.
2 x Galvanised Shackles.PART NUMBER WEIGHT APPROX BOAT LENGTH PRONG DIA NO. OF PRONGS CHAIN LENGTH CHAIN DIA ROPE LENGTH ROPE DIA SHACKLES SAW-46072 1.1kg 3m – 4m 6mm 4 2m 6mm 50m 6mm 6mm SAW-46077 2.3kg 4m – 5m 8mm 4 2m 6mm 50m 8mm 8mm SAW-46082 4.3kg 5m – 6m 10mm 5 2m 8mm 50m 10mm 8mm SAW-46087 5.8kg 6m – 7.5m 12mm 5 2m 8mm 50m 10mm 8mm SKU: SAW-46072, SAW-46077, SAW-46082, SAW-46087 -
Anchors, Anchoring and Mooring
SAW Halls Stockless Anchor
SAW Halls Stockless Anchor
• Halls Stockless anchor is most commonly used as a conventional ship anchor.
• Black oxide finish.Note that it is important to use the correct type and size of anchor for the conditions and your particular boat. The information below is provided as a guide only.
PART NUMBER WEIGHT LENGTH WIDTH SAW-12187 75kg 749mm 480mm SAW-12188 125kg 870mm 580mm SAW-12189 300kg 1400mm 844mm SAW-12190 250kg 1170mm 810mm SKU: SAW-12187, SAW-12188, SAW-12189, SAW-12190 -
Anchoring and Mooring, Anchors
SAW Plough Anchor – 316 Grade Stainless Steel
SAW Plough Anchor – 316 Grade Stainless Steel
Premium grade 316G Stainless Steel Plough anchors ideal for soft surfaces such as sand and mud.
Plough anchors provide safe and secure anchoring for heavier craft.
Fitted with retrieval eye for ease of removal if snagged.
Note that it is important to use the correct type and size of anchor for the conditions and your particular boat. The information below is provided as a guide only.
PART NUMBER WEIGHT LENGTH WIDTH SUITS BOAT LENGTH DEPTH SHANK SAW-12155 9kg (20lb) 800mm 320mm 7 metres approx. 300mm 600mm SAW-12157 12kg (26lb) 850mm 300mm 8 metres approx. 310mm 700mm SAW-12159 15kg (33lb) 900mm 350mm 11 metres approx. 370mm 695mm SAW-12161 22kg (49lb) 930mm 400mm 14 metres approx. 390mm 730mm SKU: SAW-12155, SAW-12157, SAW-12159, SAW-12161 -
Anchoring and Mooring, Anchors
Vulcan Anchor – Galvanised
Vulcan Anchor – Galvanised
The new Vulcan anchor is Rocna’s first major design development since the launch of the highly successful and acclaimed Rocna anchor itself. Following on the success of the Rocna, designer Peter Smith was often approached by customers seeking to experience the exceptional holding power and setting performance of a Rocna, but who had difficulties accommodating the roll-bar design on their bow.
After years of testing and development, Peter has come up with a design that meets the needs of these customers – the Vulcan.
Vulcan anchors are available in 10 sizes from 4 kg (9 lb) – 55 kg (121 lb) to suit vessels from small runabouts to larger launches. Galvanized and stainless steel options are available in all sizes. Refer to the Rocna Anchor sizing guide to ensure you get the corrct anchor for your boat.
UNIVERSAL APPEAL
The Vulcan is carefully designed to offer the greatest possible compatibility across a wider range of vessel bow configurations, particularly powerboats with a bow pulpit. It brings the security and reliability of the Rocna anchor, highly successful and popular with offshore cruisers and adventurers, to a wider range of boaters who we believe desire improved anchoring performance.
AN INHERITANCE OF GENUINE PERFORMANCE
The original Rocna has ”set the bar” for the highest performance and consistency of behaviour when put to the test both by a worldwide array of users and in numerous independent tests. This performance is the result of careful design and engineering by Peter, who has again put to work all of his knowledge and experience to develop a variation on the theme of the ultimate anchor. The new Vulcan capitalizes on already finely tuned design elements, infusing many of its elder sibling’s proven performance advantages for an extremely quick and reliable set across a range of seabeds combined with rock solid holding power.
NEW SOLUTIONS FOR OLD CHALLENGES
Breaking from the Rocna design, the Vulcan features a unique combination of shank and fluke geometry – including an innovative roll-palm™ (A)at the rear of the fluke – which self-rights the anchor on the seabed without the use of a roll-bar. This is assisted by the V-bulb™ (B) which extends fluke ballast downward to gain maximum leverage and efficiency. This development permits a larger fluke surface area than competing designs which rely on simple dead weight, while the concave fluke (C) is similar in design to the Rocna, directly equating to more holding power and security.
FIT FOR ALL VESSELS – AND THEIR OPERATORS
The omission of a roll-bar along with a carefully designed shank profile (D) ensures a snug fit on the bows of a widely expanded range of vessels. Platforms, bowsprits, prods, stays, and other protrusions are easily cleared with no hassle or inconvenience.
SMOOTH BOW INTERACTION & COMPATIBILITY
The Vulcan’s shank shape (D) encourages self-launching and self-stowing upon retrieval on the majority of bow rollers, with a liquid smooth action, ensuring ease of use for all operators.
STRENGTH FROM SOPHISTICATED DESIGN
In addition to the use of high tensile steel, shank strength is optimized by a unique I+V profile™ shank design (E), granting improved resistance to bending courtesy of a computer optimized I-beam geometry. This visually elegant innovation also improves setting performance, with the lower V edge (F) cutting into the seabed and minimizing resistance to a deep and secure burial.
IN THE IMAGE OF THE GODS
Embodying the rugged strength and elegant designs of its namesake – the ancient god of fire and metal smithery – the Vulcan is milled from the heritage of the Rocna anchor and the demands of innovation. Formed from high strength steels or stainless steels, and finished with the utmost attention to detail and quality.
GUARANTEED FOR LIFE
Each Vulcan anchor comes with a Lifetime Warranty against both breakage and bending in addition to manufacturing defects.
PART NUMBER SIZE SUITS BOAT LENGTH (REFER TO SIZING GUIDE) FLUKE AREA RECOMENDED G40 CHAIN ROC-VLC04GS 4kg 4-7m 420cm2 6mm (1/4″) ROC-VLC06GS 6kg 5-9m 560cm2 6mm (1/4″) ROC-VLC09GS 9kg 6-10m 730cm2 7mm (1/4″) ROC-VLC12GS 12kg 7-12m 880cm2 8mm (5/16″) ROC-VLC15GS 15kg 8-14m 1020cm2 8mm (5/16″) ROC-VLC20GS 20kg 9-16m 1240cm2 9mm (5/16″) ROC-VLC25GS 25kg 10-18m 1440cm2 10mm (3/8″) ROC-VLC33GS 33kg 12-22m 1730cm2 10mm (3/8″) ROC-VLC40GS 40kg 14-24m 1970cm2 11mm (7/16″) ROC-VLC55GS 55kg 16-26m 2430cm2 11mm (7/16″) Rocna Anchors
SKU: ROC-VLC04GS, ROC-VLC06GS, ROC-VLC09GS, ROC-VLC12GS, ROC-VLC15GS, ROC-VLC20GS, ROC-VLC25GS, ROC-VLC33GS, ROC-VLC40GS, ROC-VLC55GS -
Anchoring and Mooring, Anchors
Vulcan Anchor – Stainless Steel
Vulcan Anchor – Stainless Steel
The new Vulcan stainless steel anchor is Rocna’s first major design development since the launch of the highly successful and acclaimed Rocna anchor itself. Following on the success of the Rocna, designer Peter Smith was often approached by customers seeking to experience the exceptional holding power and setting performance of a Rocna, but who had difficulties accommodating the roll-bar design on their bow.
After years of testing and development, Peter has come up with a design that meets the needs of these customers – the Vulcan.
Vulcan anchors are available in 10 sizes from 4 kg (9 lb) – 55 kg (121 lb) to suit vessels from small runabouts to larger launches. Galvanized and stainless steel options are available in all sizes. Refer to the Rocna Anchor sizing guide to ensure you get the corrct anchor for your boat.
UNIVERSAL APPEAL
The Vulcan is carefully designed to offer the greatest possible compatibility across a wider range of vessel bow configurations, particularly powerboats with a bow pulpit. It brings the security and reliability of the Rocna anchor, highly successful and popular with offshore cruisers and adventurers, to a wider range of boaters who we believe desire improved anchoring performance.
AN INHERITANCE OF GENUINE PERFORMANCE
The original Rocna has ”set the bar” for the highest performance and consistency of behaviour when put to the test both by a worldwide array of users and in numerous independent tests. This performance is the result of careful design and engineering by Peter, who has again put to work all of his knowledge and experience to develop a variation on the theme of the ultimate anchor. The new Vulcan capitalizes on already finely tuned design elements, infusing many of its elder sibling’s proven performance advantages for an extremely quick and reliable set across a range of seabeds combined with rock solid holding power.
NEW SOLUTIONS FOR OLD CHALLENGES
Breaking from the Rocna design, the Vulcan features a unique combination of shank and fluke geometry – including an innovative roll-palm™ (A)at the rear of the fluke – which self-rights the anchor on the seabed without the use of a roll-bar. This is assisted by the V-bulb™ (B) which extends fluke ballast downward to gain maximum leverage and efficiency. This development permits a larger fluke surface area than competing designs which rely on simple dead weight, while the concave fluke (C) is similar in design to the Rocna, directly equating to more holding power and security.
FIT FOR ALL VESSELS – AND THEIR OPERATORS
The omission of a roll-bar along with a carefully designed shank profile (D) ensures a snug fit on the bows of a widely expanded range of vessels. Platforms, bowsprits, prods, stays, and other protrusions are easily cleared with no hassle or inconvenience.
SMOOTH BOW INTERACTION & COMPATIBILITY
The Vulcan’s shank shape (D) encourages self-launching and self-stowing upon retrieval on the majority of bow rollers, with a liquid smooth action, ensuring ease of use for all operators.
STRENGTH FROM SOPHISTICATED DESIGN
In addition to the use of high tensile steel, shank strength is optimized by a unique I+V profile™ shank design (E), granting improved resistance to bending courtesy of a computer optimized I-beam geometry. This visually elegant innovation also improves setting performance, with the lower V edge (F) cutting into the seabed and minimizing resistance to a deep and secure burial.
IN THE IMAGE OF THE GODS
Embodying the rugged strength and elegant designs of its namesake – the ancient god of fire and metal smithery – the Vulcan is milled from the heritage of the Rocna anchor and the demands of innovation. Formed from high strength steels or stainless steels, and finished with the utmost attention to detail and quality.
GUARANTEED FOR LIFE
Each Vulcan anchor comes with a Lifetime Warranty against both breakage and bending in addition to manufacturing defects.
PART NUMBER SIZE SUITS BOAT LENGTH (REFER TO SIZING GUIDE) FLUKE AREA RECOMENDED G40 CHAIN ROC-VULCAN4SS 4kg 4-7m 420cm2 6mm (1/4″) ROC-VULCAN6SS 6kg 5-9m 560cm2 6mm (1/4″) ROC-VULCAN9SS 9kg 6-10m 730cm2 7mm (1/4″) ROC-VULCAN12SS 12kg 7-12m 880cm2 8mm (5/16″) ROC-VULCAN15SS 15kg 8-14m 1020cm2 8mm (5/16″) ROC-VULCAN20SS 20kg 9-16m 1240cm2 9mm (5/16″) ROC-VULCAN25SS 25kg 10-18m 1440cm2 10mm (3/8″) ROC-VULCAN33SS 33kg 12-22m 1730cm2 10mm (3/8″) ROC-VULCAN40SS 40kg 14-24m 1970cm2 11mm (7/16″) ROC-VULCAN55SS 55kg 16-26m 2430cm2 11mm (7/16″) Note: Please call for availability, not all sizes of Stainless Steel anchors are kept in stock.
SKU: ROC-VULCAN4SS, ROC-VULCAN6SS, ROC-VULCAN9SS, ROC-VULCAN12SS, ROC-VULCAN15SS, ROC-VULCAN20SS, ROC-VULCAN25SS, ROC-VULCAN33SS, ROC-VULCAN40SS, ROC-VULCAN55SS