Shop
Showing 2101–2130 of 3899 results
-
Electrical, Switches
Marinco® BEP Mini Four Position Battery Switch (113553)
Marinco® BEP Mini Four Position Battery Switch (113553)
The 701-S is the smallest selector switch on the market. This battery switch offers a simple and economical way of separating two batteries. Four position rotating switch provides off, Battery 1, Both and Battery 2 alternatives. Removable rear cover insulates the rear terminals against any short circuits. Removable side plates on four sides provide access for heavy duty battery cables. Surface mount or recess mount in a 52mm hole. Mount holes 5mm roundhead. The 7015-PM is designed specifically for panel mounting with the option of full recess or shallow intrusion. This flush mounting version accepts 5mm countersunk screws. Please note this switch will not protect electronics from harmful engine starting spikes.
Features:
BLA Code: 113553
Mounting Type: Panel
Continuous rating: 200 amps DC
Intermittent rating: 300 amps DC
Cranking rating: 1000 amps DC for 10 seconds
Voltage rating: 48 volts DC maximum
Terminal stud size: 3 x 8mm
Moulded in high temperature, fibre-reinforced plasticsSKU: 113553 -
Electrical, Switches
Marinco® BEP Mini Four Position Battery Switch (113557)
Marinco® BEP Mini Four Position Battery Switch (113557)
The 701-S is the smallest selector switch on the market. This battery switch offers a simple and economical way of separating two batteries. Four position rotating switch provides off, Battery 1, Both and Battery 2 alternatives. Removable rear cover insulates the rear terminals against any short circuits. Removable side plates on four sides provide access for heavy duty battery cables. Surface mount or recess mount in a 52mm hole. Mount holes 5mm roundhead. The 7015-PM is designed specifically for panel mounting with the option of full recess or shallow intrusion. This flush mounting version accepts 5mm countersunk screws. Please note this switch will not protect electronics from harmful engine starting spikes.
Features:
BLA Code: 113557
Mounting Type: Surface
Continuous rating: 200 amps DC
Intermittent rating: 300 amps DC
Cranking rating: 1000 amps DC for 10 seconds
Voltage rating: 48 volts DC maximum
Terminal stud size: 3 x 8mm
Moulded in high temperature, fibre-reinforced plasticsSKU: 113557 -
Electrical, Switches
Marinco® BEP Nameplates for Circuit Identification (113702)
Marinco® BEP Nameplates for Circuit Identification (113702)
Black adhesive labels with white lettering to suit Marinco® BEP splash proof panels 113260-113264. Oval shaped, 41 x 11mm.
Features:
BLA Code: 113702
SKU: 113702 -
Electrical, Switches
Marinco® BEP Nameplates for Circuit Identification (113714)
Marinco® BEP Nameplates for Circuit Identification (113714)
Black adhesive labels with white lettering to suit Marinco® BEP splash proof panels 113240-113254. Oval shaped, 26 x 9mm.
Features:
BLA Code: 113714
SKU: 113714 -
Electrical, Switches
Marinco® BEP Nameplates for Circuit Identification (113717)
Marinco® BEP Nameplates for Circuit Identification (113717)
Black adhesive labels with white lettering to suit the Micro Modular panels above. Round shape 19mm diameter. A label set as above is supplied as standard with the panel.
Features:
BLA Code: 113717
Description: Mic 1 labelsSKU: 113717 -
Electrical, Switches
Marinco® BEP Nameplates for Circuit Identification (113718)
Marinco® BEP Nameplates for Circuit Identification (113718)
Black adhesive labels with white lettering to suit the Micro Modular panels above. Round shape 19mm diameter. A label set as above is supplied as standard with the panel.
Features:
BLA Code: 113718
Description: Mic 2 labelsSKU: 113718 -
Electrical, Switches
Marinco® BEP Nameplates for Circuit Identification (113719)
Marinco® BEP Nameplates for Circuit Identification (113719)
Black adhesive labels with white lettering to suit the Micro Modular panels above. Round shape 19mm diameter. A label set as above is supplied as standard with the panel.
Features:
BLA Code: 113719
Description: Mic 3 labelsSKU: 113719 -
12V Accessories, Electrical
Marinco® BEP Premier Curved Wiper Blades (116148)
Marinco® BEP Premier Curved Wiper Blades (116148)
Premier wiper blade frames are constructed using stainless steel materials and are fitted with marine grade silicone squeegee to provide smooth and efficient operation. Extra squeegee “claws” spread pressure evenly over the length of the blade, allow the blade to conform more easily to a curved windshield. Suits all
BLA range wiper arms.Features:
BLA Code: 116148
Length mm:500SKU: 116148 -
12V Accessories, Electrical
Marinco® BEP Premier Curved Wiper Blades (116150)
Marinco® BEP Premier Curved Wiper Blades (116150)
Premier wiper blade frames are constructed using stainless steel materials and are fitted with marine grade silicone squeegee to provide smooth and efficient operation. Extra squeegee “claws” spread pressure evenly over the length of the blade, allow the blade to conform more easily to a curved windshield. Suits all
BLA range wiper arms.Features:
BLA Code: 116150
Length mm:550SKU: 116150 -
12V Accessories, Electrical
Marinco® BEP Premier Curved Wiper Blades (116152)
Marinco® BEP Premier Curved Wiper Blades (116152)
Premier wiper blade frames are constructed using stainless steel materials and are fitted with marine grade silicone squeegee to provide smooth and efficient operation. Extra squeegee “claws” spread pressure evenly over the length of the blade, allow the blade to conform more easily to a curved windshield. Suits all
BLA range wiper arms.Features:
BLA Code: 116152
Length mm: 610SKU: 116152 -
12V Accessories, Electrical
Marinco® BEP Premier Wet Wiper Arms (116162)
Marinco® BEP Premier Wet Wiper Arms (116162)
- Suits the Marinco® BEP Afi wipers
- Stainless steel and heavy duty component design
- “Articulating/Bend-Back” design that locks arm in upright position for windshield cleaning
- Motor shaft mount with notched “teeth” and set screw for secure installation and operation
- Available in standard and pantographic styles
- The strength to drive larger wiper blades
- Pantograph arms will only function properly on the wiper motor sweep arms 80º or less
Features:
BLA Code: 116162
Description: Standard arm
Adjustable Length mm: 380-500
Suits Wiper Motors: 1.5+2.5 AflSKU: 116162 -
12V Accessories, Electrical
Marinco® BEP Premier Wet Wiper Arms (116164)
Marinco® BEP Premier Wet Wiper Arms (116164)
- Suits the Marinco® BEP Afi wipers
- Stainless steel and heavy duty component design
- “Articulating/Bend-Back” design that locks arm in upright position for windshield cleaning
- Motor shaft mount with notched “teeth” and set screw for secure installation and operation
- Available in standard and pantographic styles
- The strength to drive larger wiper blades
- Pantograph arms will only function properly on the wiper motor sweep arms 80º or less
Features:
BLA Code: 116164
Description: Standard arm
Adjustable Length mm: 500-635
Suits Wiper Motors: 2.5 AflSKU: 116164 -
12V Accessories, Electrical
Marinco® BEP Premier Wet Wiper Arms (116168)
Marinco® BEP Premier Wet Wiper Arms (116168)
- Suits the Marinco® BEP Afi wipers
- Stainless steel and heavy duty component design
- “Articulating/Bend-Back” design that locks arm in upright position for windshield cleaning
- Motor shaft mount with notched “teeth” and set screw for secure installation and operation
- Available in standard and pantographic styles
- The strength to drive larger wiper blades
- Pantograph arms will only function properly on the wiper motor sweep arms 80º or less
Features:
BLA Code: 116168
Description: Pantograph arm
Adjustable Length mm: 435-550
Suits Wiper Motors: 2.5 AflSKU: 116168 -
12V Accessories, Electrical
Marinco® BEP Premier Wet Wiper Arms (116170)
Marinco® BEP Premier Wet Wiper Arms (116170)
- Suits the Marinco® BEP Afi wipers
- Stainless steel and heavy duty component design
- “Articulating/Bend-Back” design that locks arm in upright position for windshield cleaning
- Motor shaft mount with notched “teeth” and set screw for secure installation and operation
- Available in standard and pantographic styles
- The strength to drive larger wiper blades
- Pantograph arms will only function properly on the wiper motor sweep arms 80º or less
Features:
BLA Code: 116170
Description: Pantograph arm
Adjustable Length mm: 550-660
Suits Wiper Motors: 2.5 AflSKU: 116170 -
-
Electrical, Switches
Marinco® BEP Splash Proof Switch Fuse Panels – 3 Gang plus Power Socket Grey (Part No.: 113243)
-14%
Electrical, SwitchesMarinco® BEP Splash Proof Switch Fuse Panels – 3 Gang plus Power Socket Grey (Part No.: 113243)
Marinco® BEP Splash Proof Switch Fuse Panels – 3 Gang plus Power Socket Grey (Part No.: 113243)
Injection moulded plastic panel with high quality two position switches rated to 20 amp, covered by rubber boots and a cigarette lighter type power socket rated to 16 amp. Panel is splash proof to IP56 standard from the front face. Each pair of toggle switch/power socket is connected to a behind panel mounted AF type blade fuse holder (115714). Available in 3 or 5 gang versions with a choice of grey or white facia. Supplied complete with 113714 28 piece label set. Power plug is not included with the panel and is available as a separate part. Now supplied with Marinco power socket.
Features:
BLA Code: 113243
Facia Colour: Grey
Gang: 3
Overall Size mm: 107×95
Cut Out Size mm: 87×45
Intrusion mm: 75
Power volt: 12-24
Mount Screws mm: 3 c/sSKU: 113243 -
Electrical, Switches
Marinco® BEP Splash Proof Switch Fuse Panels – 3 Gang plus Power Socket White (Part No.: 113244)
Electrical, SwitchesMarinco® BEP Splash Proof Switch Fuse Panels – 3 Gang plus Power Socket White (Part No.: 113244)
Marinco® BEP Splash Proof Switch Fuse Panels – 3 Gang plus Power Socket White (Part No.: 113244)
Injection moulded plastic panel with high quality two position switches rated to 20 amp, covered by rubber boots and a cigarette lighter type power socket rated to 16 amp. Panel is splash proof to IP56 standard from the front face. Each pair of toggle switch/power socket is connected to a behind panel mounted AF type blade fuse holder (115714). Available in 3 or 5 gang versions with a choice of grey or white facia. Supplied complete with 113714 28 piece label set. Power plug is not included with the panel and is available as a separate part. Now supplied with Marinco power socket.
Features:
BLA Code: 113244
Facia Colour: White
Gang: 3
Overall Size mm: 107×95
Cut Out Size mm: 87×45
Intrusion mm: 75
Power volt: 12-24
Mount Screws mm: 3 c/sSKU: 113244 -
Electrical, Switches
Marinco® BEP Splash Proof Switch Fuse Panels – 4 Gang Grey (Part No.: 113240)
-6%
Electrical, SwitchesMarinco® BEP Splash Proof Switch Fuse Panels – 4 Gang Grey (Part No.: 113240)
Marinco® BEP Splash Proof Switch Fuse Panels – 4 Gang Grey (Part No.: 113240)
Injection moulded plastic panel with high quality two position toggle switches covered by neoprene rubber boots to provide splash proof (IP56) protection from the front face. Each pair of toggle switches is connected to a behind panel mounted AF type blade fuse (115714). Available in 4 or 6 gang versions with a choice of grey or white facia. Supplied complete with 113714 28 piece label set. Switches are rated to 20 amp.
Features:
BLA Code: 113240
Facia Colour: Grey
Gang: 4
Overall Size mm: 107×95
Cut Out Size mm: 87×45
Intrusion mm: 75
Power volt: 12-24
Mount Screws mm: 3 c/sSKU: 113240 -
Electrical, Switches
Marinco® BEP Splash Proof Switch Fuse Panels – 4 Gang White (Part No.: 113241)
Marinco® BEP Splash Proof Switch Fuse Panels – 4 Gang White (Part No.: 113241)
Injection moulded plastic panel with high quality two position toggle switches covered by neoprene rubber boots to provide splash proof (IP56) protection from the front face. Each pair of toggle switches is connected to a behind panel mounted AF type blade fuse (115714). Available in 4 or 6 gang versions with a choice of grey or white facia. Supplied complete with 113714 28 piece label set. Switches are rated to 20 amp.
Features:
BLA Code: 113241
Facia Colour: White
Gang: 4
Overall Size mm: 107×95
Cut Out Size mm: 87×45
Intrusion mm: 75
Power volt: 12-24
Mount Screws mm: 3 c/sSKU: 113241 -
Electrical, Switches
Marinco® BEP Splash Proof Switch Fuse Panels – 5 Gang plus Power Socket Grey (Part No.: 113253)
-1%
Electrical, SwitchesMarinco® BEP Splash Proof Switch Fuse Panels – 5 Gang plus Power Socket Grey (Part No.: 113253)
Marinco® BEP Splash Proof Switch Fuse Panels – 5 Gang plus Power Socket Grey (Part No.: 113253)
Injection moulded plastic panel with high quality two position switches rated to 20 amp, covered by rubber boots and a cigarette lighter type power socket rated to 16 amp. Panel is splash proof to IP56 standard from the front face. Each pair of toggle switch/power socket is connected to a behind panel mounted AF type blade fuse holder (115714). Available in 3 or 5 gang versions with a choice of grey or white facia. Supplied complete with 113714 28 piece label set. Power plug is not included with the panel and is available as a separate part. Now supplied with Marinco power socket.
Features:
BLA Code: 113253
Facia Colour: Grey
Gang: 5
Overall Size mm: 107×95
Cut Out Size mm: 87×45
Intrusion mm: 75
Power volt: 12-24
Mount Screws mm: 3 c/sSKU: 113253 -
Electrical, Switches
Marinco® BEP Splash Proof Switch Fuse Panels – 5 Gang plus Power Socket White (Part No.: 113254)
Electrical, SwitchesMarinco® BEP Splash Proof Switch Fuse Panels – 5 Gang plus Power Socket White (Part No.: 113254)
Marinco® BEP Splash Proof Switch Fuse Panels – 5 Gang plus Power Socket White (Part No.: 113254)
Injection moulded plastic panel with high quality two position switches rated to 20 amp, covered by rubber boots and a cigarette lighter type power socket rated to 16 amp. Panel is splash proof to IP56 standard from the front face. Each pair of toggle switch/power socket is connected to a behind panel mounted AF type blade fuse holder (115714). Available in 3 or 5 gang versions with a choice of grey or white facia. Supplied complete with 113714 28 piece label set. Power plug is not included with the panel and is available as a separate part. Now supplied with Marinco power socket.
Features:
BLA Code: 113254
Facia Colour: White
Gang: 5
Overall Size mm: 107×95
Cut Out Size mm: 87×45
Intrusion mm: 75
Power volt: 12-24
Mount Screws mm: 3 c/sPlease note switch panel is White (colour can be seen on Parts 113241, 113244)
SKU: 113254 -
Electrical, Switches
Marinco® BEP Splash Proof Switch Fuse Panels – 6 Gang Grey (Part No: 113250)
-1%
Electrical, SwitchesMarinco® BEP Splash Proof Switch Fuse Panels – 6 Gang Grey (Part No: 113250)
Marinco® BEP Splash Proof Switch Fuse Panels – 6 Gang Grey (Part No.: 113250)
Injection moulded plastic panel with high quality two position toggle switches covered by neoprene rubber boots to provide splash proof (IP56) protection from the front face. Each pair of toggle switches is connected to a behind panel mounted AF type blade fuse (115714). Available in 4 or 6 gang versions with a choice of grey or white facia. Supplied complete with 113714 28 piece label set. Switches are rated to 20 amp.
Features:
BLA Code: 113250
Facia Colour: Grey
Gang: 6
Overall Size mm: 107×95
Cut Out Size mm: 87×45
Intrusion mm: 75
Power volt: 12-24
Mount Screws mm: 3 c/sSKU: 113250 -
Electrical, Switches
Marinco® BEP Splash Proof Switch Fuse Panels – 6 Gang White (Part No.: 113251)
Marinco® BEP Splash Proof Switch Fuse Panels – 6 Gang White (Part No.: 113251)
Injection moulded plastic panel with high quality two position toggle switches covered by neoprene rubber boots to provide splash proof (IP56) protection from the front face. Each pair of toggle switches is connected to a behind panel mounted AF type blade fuse (115714). Available in 4 or 6 gang versions with a choice of grey or white facia. Supplied complete with 113714 28 piece label set. Switches are rated to 20 amp.
Features:
BLA Code: 113251
Facia Colour: White
Gang: 6
Overall Size mm: 107×95
Cut Out Size mm: 87×45
Intrusion mm: 75
Power volt: 12-24
Mount Screws mm: 3 c/sSKU: 113251 -
Electrical, Switches
Marinco® BEP Splash Proof Switch Panels (113260)
Marinco® BEP Splash Proof Switch Panels (113260)
Stylish contoured, moulded plastic panel with removable cover plate over the switches to conceal screws and water drain. Six gang switched circuits with high quality, two position toggle switches covered by neoprene rubber boots providing splash proof protection from the front face to IP56 standard. Features red LEDs for systems on and green LED back-lit labels. Choice of three models – Unfused for installation with separate fuses, fused with each pair of toggle switches connected to a behind panel mounted AF type blade fuse or PTC fused. Positive Temperature Coefficient (PTC) fuses are solid state 9 amp resettable fuses (turn switch off for 10 secs to reset). Supplied complete with 113702, 29 piece label set below. Additional label set 113703 is also available, below. Switches are rated to 20 amp.
Features:
BLA Code: 113260
Facia Colour: Grey
Fuses: No
Overall Size mm: 110×158
Cut Out Size mm: 92×130
Intrusion mm: 65
Power volt: 12
Mount Screws mm: 4 c/sSKU: 113260 -
Electrical, Switches
Marinco® BEP Splash Proof Switch Panels (113261)
Marinco® BEP Splash Proof Switch Panels (113261)
Stylish contoured, moulded plastic panel with removable cover plate over the switches to conceal screws and water drain. Six gang switched circuits with high quality, two position toggle switches covered by neoprene rubber boots providing splash proof protection from the front face to IP56 standard. Features red LEDs for systems on and green LED back-lit labels. Choice of three models – Unfused for installation with separate fuses, fused with each pair of toggle switches connected to a behind panel mounted AF type blade fuse or PTC fused. Positive Temperature Coefficient (PTC) fuses are solid state 9 amp resettable fuses (turn switch off for 10 secs to reset). Supplied complete with 113702, 29 piece label set below. Additional label set 113703 is also available, below. Switches are rated to 20 amp.
Features:
BLA Code: 113261
Facia Colour: White
Fuses: No
Overall Size mm: 110×158
Cut Out Size mm: 92×130
Intrusion mm: 65
Power volt: 12
Mount Screws mm: 4 c/sSKU: 113261 -
Electrical, Switches
Marinco® BEP Splash Proof Switch Panels (113261)
Marinco® BEP Splash Proof Switch Panels (113261)
Stylish contoured, moulded plastic panel with removable cover plate over the switches to conceal screws and water drain. Six gang switched circuits with high quality, two position toggle switches covered by neoprene rubber boots providing splash proof protection from the front face to IP56 standard. Features red LEDs for systems on and green LED back-lit labels. Choice of three models – Unfused for installation with separate fuses, fused with each pair of toggle switches connected to a behind panel mounted AF type blade fuse or PTC fused. Positive Temperature Coefficient (PTC) fuses are solid state 9 amp resettable fuses (turn switch off for 10 secs to reset). Supplied complete with 113702, 29 piece label set below. Additional label set 113703 is also available, below. Switches are rated to 20 amp.
Features:
BLA Code: 113261
Facia Colour: White
Fuses: No
Overall Size mm: 110×158
Cut Out Size mm: 92×130
Intrusion mm: 65
Power volt: 12
Mount Screws mm: 4 c/sSKU: 113261 -
Electrical, Switches
Marinco® BEP Splash Proof Switch Panels (113262)
Marinco® BEP Splash Proof Switch Panels (113262)
Stylish contoured, moulded plastic panel with removable cover plate over the switches to conceal screws and water drain. Six gang switched circuits with high quality, two position toggle switches covered by neoprene rubber boots providing splash proof protection from the front face to IP56 standard. Features red LEDs for systems on and green LED back-lit labels. Choice of three models – Unfused for installation with separate fuses, fused with each pair of toggle switches connected to a behind panel mounted AF type blade fuse or PTC fused. Positive Temperature Coefficient (PTC) fuses are solid state 9 amp resettable fuses (turn switch off for 10 secs to reset). Supplied complete with 113702, 29 piece label set below. Additional label set 113703 is also available, below. Switches are rated to 20 amp.
Features:
BLA Code: 113262
Facia Colour: Grey
Fuses: Blade
Overall Size mm: 110×158
Cut Out Size mm: 92×130
Intrusion mm: 75
Power volt: 12
Mount Screws mm: 4 c/sSKU: 113262 -
Electrical, Switches
Marinco® BEP Splash Proof Switch Panels (113263)
Marinco® BEP Splash Proof Switch Panels (113263)
Stylish contoured, moulded plastic panel with removable cover plate over the switches to conceal screws and water drain. Six gang switched circuits with high quality, two position toggle switches covered by neoprene rubber boots providing splash proof protection from the front face to IP56 standard. Features red LEDs for systems on and green LED back-lit labels. Choice of three models – Unfused for installation with separate fuses, fused with each pair of toggle switches connected to a behind panel mounted AF type blade fuse or PTC fused. Positive Temperature Coefficient (PTC) fuses are solid state 9 amp resettable fuses (turn switch off for 10 secs to reset). Supplied complete with 113702, 29 piece label set below. Additional label set 113703 is also available, below. Switches are rated to 20 amp.
Features:
BLA Code: 113263
Facia Colour: White
Fuses: Blade
Overall Size mm: 110×158
Cut Out Size mm: 92×130
Intrusion mm: 75
Power volt: 12
Mount Screws mm: 4 c/sSKU: 113263 -
Electrical, Switches
Marinco® BEP Stainless Steel Push Button Switches & Buzzers (114210)
Marinco® BEP Stainless Steel Push Button Switches & Buzzers (114210)
- Momentary and latched actuation options available
- Blue and red circuit status indication LED options
- 304 grade stainless steel components, silver alloy contacts
- Maximum switch current rating to 5 amps
- Small 19mm mounting hole allowing for 10mm panel thickness
- Waterproof to IP67 for switches only
- IP50 rating for buzzer only
- Buzzer sound intensity to 80dB
Features:
BLA Code: 114210
Description: On/off S/S red illumination
Volts: 12SKU: 114210 -
Electrical, Switches
Marinco® BEP Stainless Steel Push Button Switches & Buzzers (114212)
Marinco® BEP Stainless Steel Push Button Switches & Buzzers (114212)
- Momentary and latched actuation options available
- Blue and red circuit status indication LED options
- 304 grade stainless steel components, silver alloy contacts
- Maximum switch current rating to 5 amps
- Small 19mm mounting hole allowing for 10mm panel thickness
- Waterproof to IP67 for switches only
- IP50 rating for buzzer only
- Buzzer sound intensity to 80dB
Features:
BLA Code: 114212
Description: Momentary/off S/S red illumination
Volts: 12SKU: 114212
