Shop
Showing 1711–1740 of 3735 results
-
-
-
-
Safety Gear
Life Cell Marine – The Trailer Boat
Life Cell Marine – The Trailer Boat – assists 2-4 people in the water
This product due to its bulky nature requires an additional surcharge on freight. We will contact you regarding this depending on location – or simply contact us on 0732658016 for a quote.
The smallest Life Cell that is designed to fit on smaller boats and can be used in inland or offshore waters. The EPIRB is mounted externally on the side of the Life Cell and the internal compartment will fit all mandatory safety equipment, which can be purchased separately. Mounting bracket is also included in the purchase price.
A device designed to reduce the amount of lives lost at sea, by ensuring all safety equipment is contained in one place when abandonment is the only option. Life Cell is made from closed cell PU foam and constructed from U.V. resistant flame retardant polyethylene (PE). They are supplied with a PE mount bracket. The Life Cell is designed to automatically float from the bracket in the event of being submerged. Unlike grab bags, Life Cells float acting as secure hand-holds keeping all crew together and as stable platforms to assist in the deployment of flares and other safety equipment. Life Cell is a floatation device that stores all your essential safety gear including
- EPIRBs
- Flares
- V sheets
- Whistles
- Horns
- Torches
- External: 40cm x 17cm x 42cm
- Internal: 20cm length x 27cm width x 10cm depth
- 3.9kg
Colours:
- Orange
Lanyards:
- 4 Included
Mounting Brackets:
- Mounting Bracket (standard)
- Stainless Steel Brackets
SKU: Life Cell Trailer Boat - 226451 -
Safety Gear
Life Cell Marine – The Yachtsman
Life Cell Marine – The Yachtsman – assists 2-4 people in the water
This product due to its bulky nature requires an additional surcharge on freight. We will contact you regarding this depending on location – or simply contact us on 0732658016 for a quote.
Designed for recreational boats that operate in open waters. Although compact in size this model will store both the EPIRB and all safety equipment in the internal compartment. There is also an external recess that will hold EPRIB in an upright position in the event that you need to activate. Mounting bracket is also included but safety equipment can be purchased separately.
A device designed to reduce the amount of lives lost at sea, by ensuring all safety equipment is contained in one place when abandonment is the only option. Life Cell is made from closed cell PU foam and constructed from U.V. resistant flame retardant polyethylene (PE). They are supplied with a PE mount bracket. The Life Cell is designed to automatically float from the bracket in the event of being submerged. Unlike grab bags, Life Cells float acting as secure hand-holds keeping all crew together and as stable platforms to assist in the deployment of flares and other safety equipment. Life Cell is a floatation device that stores all your essential safety gear including
- EPIRBs
- Flares
- V sheets
- Whistles
- Horns
- Torches
Dimensions:
- External: 59cm x 17cm x 42cm
- Internal: 28.5cm length x 26cm width x 10.5cm depth
- 5.0kg
Colours:
- Orange
- White
Lanyards:
- 4 Included
Mounting Brackets:
- Mounting Bracket (standard)
- Stainless Steel Brackets
SKU: Life Cell Yachtsman - 226452 -
Safety Gear
Life Cell Marine – Trawlerman
Life Cell Marine – Trawlerman – assists 6 people in the water
This product due to its bulky nature requires an additional surcharge on freight. We will contact you regarding this depending on location – or simply contact us on 0732658016 for a quote.
Designed for larger boats or for commercial application. This Life Cell is extremely buoyant and has plenty of room to store all your essential safety equipment including EPIRB in the internal compartment. An external recess will also hold your EPIRB upright in the event that you need to activate once in the water. Mounting bracket is also included but safety equipment can be purchased separately.
A device designed to reduce the amount of lives lost at sea, by ensuring all safety equipment is contained in one place when abandonment is the only option. Life Cell is made from closed cell PU foam and constructed from U.V. resistant flame retardant polyethylene (PE). They are supplied with a PE mount bracket. The Life Cell is designed to automatically float from the bracket in the event of being submerged. Unlike grab bags, Life Cells float acting as secure hand-holds keeping all crew together and as stable platforms to assist in the deployment of flares and other safety equipment. Life Cell is a floatation device that stores all your essential safety gear including
• EPIRBs
• Flares
• V sheets
• Whistles
• Horns
• TorchesDimensions:
- External: 56cm x 22cm x 53cm
- Internal: 29.5cm length x 23.5cm width x 16cm depth
- 7.4kg
Colours:
- Orange
Lanyards:
- 6 Included
Mounting Brackets:
- Mounting Bracket (standard)
- Stainless Steel Brackets
SKU: Life Cell Trawlerman - 226454 -
Safety Gear
Lifebuoy 720mm SOLAS 2.5Kg
Lifebuoy 720mm SOLAS 2.5Kg
SOLAS approved 720mm (28) diameter foam fi lled orange plastic lifebuoys complete with retro-refl ective tape and poly rope. Approved for commercial and pleasure craft in Australian or International waters. Cross-linked polyethylene safety orange outer shell that is unaffected by extreme weather conditions. Includes 8 x retro-refl ective patches 110mm x 50mm each on the lifebuoy and white poly rope all around. Diameter : 720mm outer. 440mm inside hole.
SKU: RWB-8705 -
Lighting, Navigation Lights
Light – Halogen Cabin
Light – Halogen Cabin
Beautifully finished in polished brass. All brass body with anti-corrosion protective lacquer. Moulded chrome look internal reflector. Rocker switched. Swivel and tilt adjustable. 10 watt, 12 volt halogen bulb.
BLA CODETRIM COLOUR122278 
Brass SKU: 122278 -
Boating Accessories, Hinges
Light Duty Butt Hinge (38750)
Light Duty Butt Hinge (38750)
• 304G stainless steel.
• Not counter sunk.Features:
Part No. 38750
Description: 50mm Butt Hinge
Length (mm): 50
Width (mm): 34
Thickness(mm): 1
No.Mount Holes: 6
Mount Holes (mm): 3
Length Split (mm): 17/17SKU: 38750 -
Boating Accessories, Hinges
Light Duty Butt Hinge (38765)
Light Duty Butt Hinge (38765)
• 304G stainless steel.
• Not counter sunk.Features:
Part No: 38765
Description: 65mm Butt Hinge
Length (mm): 63
Width (mm): 40
Thickness (mm): 1
No. Mount Holes: 6
Mount Holes (mm): 3
Length Split (mm): 20/20SKU: 38765 -
Boating Accessories, Hinges
Light Duty Butt Hinge (38775)
Light Duty Butt Hinge (38750)
• 304G stainless steel.
• Not counter sunk.Features:
Part No: 38775
Description: 75mm Butt Hinge
Length (mm): 76
Width (mm): 48
Thickness (mm): 1
No. Mount Holes: 6
Mount Holes (mm): 3.5
Length Split (mm): 24/24SKU: 38775 -
Lighting, Navigation Lights
Light Kit – Docking
Light Kit – Docking
Two quartz halogen 12 volt, 35 watt spotlights with white ABS plastic high impact housing and stainless steel mounting brackets with white rubber boots. Kit contains illuminated rocker switch, wiring harness, mount hardware and in-line fuse.
BLA CODEWIDTH MMDEPTH MMHEIGHT MMSWITCH CUT OUT MMWIRE LENGTH MM123058 
144 72 105 12 x 30 9 Spare Parts
124192 Replacement bulb
SKU: 123058 -
-
Lighting
Live Bait LED Light (53980)
Live Bait LED Light (53980)
• Ideal use in all interior and exterior marine, caravan, motorhome and camper trailer applications. Most commonly used for courtesy or stairway lighting.
• Waterproof rating of IP67
• Supplied with: 180mm wiring. 2 x Gaskets. 1 x Nylon backing nut.Features:
Part No: 53980
LED Colour: White
Diameter (mm): 38
Volts: 12
Amps: 0.13
Watts: 1.5SKU: 53980 -
Lighting
Live Bait LED Light (53984)
Live Bait LED Light (53984)
• Ideal use in all interior and exterior marine, caravan, motorhome and camper trailer applications. Most commonly used for courtesy or stairway lighting.
• Waterproof rating of IP67
• Supplied with: 180mm wiring. 2 x Gaskets. 1 x Nylon backing nut.Features:
Part No: 53984
LED Colour: Blue
Diameter (mm): 38
Volts: 12
Amps: 0.13
Watts: 1.5SKU: 53984 -
Livewell Pumps, Pumps and Plumbing
Livewell Tank Aerators
Livewell Tank Aerators
• Fully adjustable aerator head has been especially designed for the user to customise water flow to suit their live bait tank.
• Easy installation.
• Suits 3/4 inch I.D. Hose.Part No. SAW-23036 
SAW-23037 
Hose I.D. 3/4 inch 3/4 inch Cut Out Dia. 25mm Dia. 25mm Colour White Black SKU: SAW-23036, SAW-23037 -
Brake Kits and Parts, Trailer Parts
LoadForce 10 inch Disc Hub
LoadForce 10 inch Disc Hub
LoadForce dacromet dacromet trailer disc brake hub 10 inch x 5/8 inch HT 5 stud Supplied with quality Japanese slimline (Ford) bearings and Australian made hub marine seal.
HT Holden stud measurements:
- Stud diameter: 7/16 inches.
- PCD (Pitch circle diameter): 108mm (4.251 inches).
- Stud distance: 63mm.
- Bearing: Slimline / Ford: Inner LM68149/10 ; Outer LM12749/10.
All disc hub assemblies come boxed complete with studs, nuts, bearings, marine seal and dust cap.
Load Force Disc Rotor range for Trailers and Caravans – Product in Focus
SKU: DH58HTFG-10 -
Brake Kits and Parts, Trailer Parts
LoadForce DBC-225-DAC Trailer Brake Caliper Replaces Kodiak 225
LoadForce DBC-225-DAC Trailer Brake Caliper Replaces Kodiak 225
LoadForce DBC-225-DAC replacement for Kodiak 225 dacromet cast iron hydraulic trailer brake caliper. Found on some imported American designed trailers this caliper fits on 19mm (3/4 inch) up to 24mm disc. Comes complete with brake pads, stainless slide pins, brass union and bleed screws.
When connecting your new trailer brake caliper to hydraulic brake lines you must flush out the old brake fluid from the actuator (master cylinder or electric/hydraulic pump) and brake lines before connecting this new brake caliper.
Once flushed, then connect brake lines, refresh the system with new brake fluid and bleed air from the brake system.
Compatible with Dot 3 and Dot 4 brake fluid, however we do recommend using Dot 4 Brake fluid as it has higher moisture resistance. Failure to flush the system could void warranty.
The brake pads used in this caliper are a premium product specifically designed for trailer applications. Large trailers carrying heavy loads can generate very high brake temperatures. The heavy duty asbestos free friction material formulation used in the LoadForce product is capable of handling high temperatures for long time periods and minimizes the chances of brake fade.
This brake caliper comes with a set of disc pads.
SKU: DBC-225-DAC -
Brake Kits and Parts, Trailer Parts
LoadForce Disc Brake Pad Set for Deemaxx Calipers
LoadForce Disc Brake Pad Set for Deemaxx Calipers
LoadForce disc brake pad set for Deemaxx calipers. Set of 4 brake pads.
The LoadForce trailer brake pad and trailer brake shoe range is a premium product specifically designed for trailer applications. Large trailers carrying heavy loads can generate very high brake temperatures. The heavy duty asbestos free friction material formulation used in the LoadForce product is capable of handling high temperatures for long time periods and minimizes the chances of brake fade.
SKU: DPDMX -
Brake Kits and Parts, Trailer Parts
LoadForce disc brake pad set for TA100 and TA200 – DPT
LoadForce disc brake pad set for TA100 and TA200 – DPT
LoadForce™ disc brake pad set. Comes as a set of 4. These brake pads suit the LoadForce TA100 mechanical and TA200 hydraulic brake caliper models. They will also suit Trigg A100 mechanical, Trigg A200 hydrualic, ARK mechanical, Al-Ko mechanical caliper and Meher brake calipers.
The LoadForce trailer brake pad and trailer brake shoe range is a premium product specifically designed for trailer applications. Large trailers carrying heavy loads can generate very high brake temperatures. The heavy duty asbestos free friction material formulation used in the LoadForce product is capable of handling high temperatures for long time periods and minimizes the chances of brake fade.
Load Force TA100 Mechanical Trailer Brake Caliper – Product in Focus
SKU: DPT -
Brake Kits and Parts, Trailer Parts
LoadForce Disc Brake Pad Set for TA300 – DPTA300
LoadForce Disc Brake Pad Set for TA300 – DPTA300
The trailer disc brake pad set of 4 fits LoadForce TA300 & TA400, caliper models. It also fits Al-Ko, Meher, Trojan AU, and Trojan MK7 brake calipers.
The trailer brake pad and trailer brake shoe range is a premium product specifically designed for trailer applications. Large trailers carrying heavy loads can generate very high brake temperatures. The heavy-duty asbestos-free friction material formulation used in the LoadForce product is capable of handling high temperatures for long time periods and minimizes the chances of brake fade.
Load Force TA300 Hydraulic Trailer Brake Caliper – Product in Focus
SKU: DPTA300 -
-
Brake Kits and Parts, Trailer Parts
LoadForce TA100 Mechanical Brake Caliper – Galvanised Cast Iton
LoadForce TA100 Mechanical Brake Caliper – Galvanised Cast Iton
LoadForce TA300 hydraulic galvanised cast iron brake calliper with a stainless steel piston. An improved design that directly replaces the Trojan AU caliper which is fitted with phenolic plastic pistons. Phenolic pistons are renowned for swelling and eventually seizing in the calliper. The Loadforce TA300 trailer brake calliper eliminates this fault by using a billet stainless steel piston.
The TA300 trailer brake caliper fits 1/2 inch up to 5/8 inch rotor thickness and is also designed to be a replacement for the Trigg A200 caliper.
1 x TA300BOLTKIT required for mounting. A HU4 union and CW1 copper washer are also required for the installation of the brake line to the caliper.
Before connecting your new brake caliper to hydraulic brake lines you must flush out the old brake fluid from the actuator (master cylinder or electric/hydraulic pump) and brake lines before connecting this new brake caliper.
Once flushed, then connect brake lines, refresh the system with new brake fluid and bleed air from the brake system.
Compatible with Dot 3 and Dot 4 brake fluid, however we do recommend using Dot 4 Brake fluid as it has higher moisture resistance. Failure to flush the system could void warranty.
The brake pads used in this caliper a premium product specifically designed for trailer applications. Large trailers carrying heavy loads can generate very high brake temperatures. The heavy duty asbestos free friction material formulation used in the LoadForce product are capable of handling high temperatures for long time periods and minimizes the chances of brake fade.
This trailer brake caliper comes with brake pads.
Load Force TA100 Mechanical Trailer Brake Caliper – Product in Focus
SKU: TA100 -
Brake Kits and Parts, Trailer Parts
LoadForce TA200 Hydraulic Trailer Brake caliper Replacement for Trigg A200
Brake Kits and Parts, Trailer PartsLoadForce TA200 Hydraulic Trailer Brake caliper Replacement for Trigg A200
LoadForce TA200 Hydraulic Trailer Brake caliper Replacement for Trigg A200
LoadForce TA200 hydraulic trailer brake caliper galvanized cast iron. Fits on 1/2 inch up to 5/8 inch rotor width.
Caliper includes brake pads and stainless steel slide tubes. This trailer brake caliper directly replaces the Trigg A200 caliper.
The TA200 has been upgraded with a conventional square section piston seal over the O-ring type used by most others on the market.
2 x A100BOLT caliper bolts required for mounting. HU4 union and CW1 copper washer are required for the installation of the brake lines to the TA200 brake caliper.
The brake pads used in this caliper a premium product specifically designed for trailer applications. Large trailers carrying heavy loads can generate very high brake temperatures. The heavy-duty asbestos-free friction material formulation used in the LoadForce product is capable of handling high temperatures for long time periods and minimizes the chances of brake fade.
SKU: TA200 -
Brake Kits and Parts, Trailer Parts
LoadForce TA300 Hydraulic Disc Brake Caliper
LoadForce TA300 Hydraulic Disc Brake Caliper
LoadForce TA300 hydraulic galvanised cast iron brake calliper with a stainless steel piston. An improved design that directly replaces the Trojan AU caliper which is fitted with phenolic plastic pistons. Phenolic pistons are renowned for swelling and eventually seizing in the calliper. The Loadforce TA300 trailer brake calliper eliminates this fault by using a billet stainless steel piston.
The TA300 trailer brake caliper fits 1/2 inch up to 5/8 inch rotor thickness and is also designed to be a replacement for the Trigg A200 caliper.
1 x TA300BOLTKIT required for mounting. A HU4 union and CW1 copper washer are also required for the installation of the brake line to the caliper.
Before connecting your new brake caliper to hydraulic brake lines you must flush out the old brake fluid from the actuator (master cylinder or electric/hydraulic pump) and brake lines before connecting this new brake caliper.
Once flushed, then connect brake lines, refresh the system with new brake fluid and bleed air from the brake system.
Compatible with Dot 3 and Dot 4 brake fluid, however we do recommend using Dot 4 Brake fluid as it has higher moisture resistance. Failure to flush the system could void warranty.
The brake pads used in this caliper a premium product specifically designed for trailer applications. Large trailers carrying heavy loads can generate very high brake temperatures. The heavy duty asbestos free friction material formulation used in the LoadForce product are capable of handling high temperatures for long time periods and minimizes the chances of brake fade.
This trailer brake caliper comes with brake pads.
Load Force TA300 Hydraulic Trailer Brake Caliper – Product in Focus
SKU: TA300 -
Boating Accessories, Fillers, Fillers, Fuel Tanks & Accessories
Lockable Deck Filler – 50mm Diesel (29668)
Boating Accessories, Fillers, Fillers, Fuel Tanks & AccessoriesLockable Deck Filler – 50mm Diesel (29668)
Lockable Deck Filler – 50mm Diesel (29668)
• Cylinder lock made from marine grade stainless steel.
• Designed when locked the cap revolves freely but cannot be opened.Features:
Part No.: 29668
Description: Lockable Deck Filler
Tail Diameter (mm): 50
Label: DieselSKU: 29668
