$159.00
Lockable Deck Filler – 50mm Diesel (29668)
• Cylinder lock made from marine grade stainless steel.
• Designed when locked the cap revolves freely but cannot be opened.
Features:
Part No.: 29668
Description: Lockable Deck Filler
Tail Diameter (mm): 50
Label: Diesel
You must be logged in to post a review.
Standard Plastic Bathyscopes (70102)
Features:
Part No.: 70102
Viewer: 2 Piece
Height (mm): 480
Lens Diameter (mm): 300
Handle Diameter (mm): 345
Colour: Orange
Black rubber, cup style, used to feed water into the cooling system of an engine to flush out salt, sand and other debris after use, or simply to check your enqine performance prior to launching. Uses a sturdy powder coated steel spring to powerfully clamp on to the outboard’s leg and seal the rubber, maximising water pressure. Suits most medium to large sterndrive & outboards with side water inlets on the lower leg/drive unit (*If unsure whether these are suitable please check your owners manual or contact us with your motor details). Easy to connect – Simply slide cups over the top of the water intake slots, & connect your garden hose to the quick connect male fitting moulded into side (refer images).
*Please note: As a guide if an engine does not start pumping water after 4 to 5 seconds of using these flushers turn engine off and reposition flushers/ear muffs to prevent over heating/water pump burnout, and try again. If this does not fix the problem, turn off engine and seek advice.
Sizing Chart & Suitability:
| Shape | Rubber Size (mm) | Suitable For |
| Small Round | 90 | Small Outboards |
| Oval | 120 x 90 | Medium to Large |
| Rectangle | 130 x 85 | Medium to Large |
XXX Marine – Tournament Series G-Clamp Rod Holder (RHP300)
Ideal for use on boats (clamp to boat side), piers, kayaks etc. Corrosion resistant anodised and polished silver aluminum tube. 360° rotation and with fully adjustable rod angle. Turns through 12 rest position.
Features:
G Clamp mount made from aluminum with 304 stainless steel pressure screw. For boat sides up to 70mm thick.
Rod holder tube length: 280mm
Rod holder tube inner diameter: 41mm
Black rubber, cup style, used to feed water into the cooling system of an engine to flush out salt, sand and other debris after use, or simply to check your enqine performance prior to launching. Uses a sturdy powder coated steel spring to powerfully clamp on to the outboard’s leg and seal the rubber, maximising water pressure. Suits most small outboards with side water inlets on the lower leg/drive unit (*If unsure whether these are suitable please check your owners manual or contact us with your motor details). Easy to connect – Simply slide cups over the top of the water intake slots, & connect your garden hose to the quick connect male fitting moulded into side (refer images).
*Please note: As a guide if an engine does not start pumping water after 4 to 5 seconds of using these flushers turn engine off and reposition flushers/ear muffs to prevent over heating/water pump burnout, and try again. If this does not fix the problem, turn off engine and seek advice.
Sizing Chart & Suitability:
| Shape | Rubber Size (mm) | Suitable For |
| Small Round | 90 | Small Outboards |
| Oval | 120 x 90 | Medium to Large |
| Rectangle | 130 x 85 | Medium to Large |
There are no reviews yet.