Shop
Showing 1711–1740 of 3715 results
-
Brake Kits and Parts, Trailer Parts
LoadForce 10 inch Disc Hub
LoadForce 10 inch Disc Hub

LoadForce dacromet dacromet trailer disc brake hub 10 inch x 5/8 inch HT 5 stud Supplied with quality Japanese slimline (Ford) bearings and Australian made hub marine seal.
HT Holden stud measurements:
- Stud diameter: 7/16 inches.
- PCD (Pitch circle diameter): 108mm (4.251 inches).
- Stud distance: 63mm.
- Bearing: Slimline / Ford: Inner LM68149/10 ; Outer LM12749/10.
All disc hub assemblies come boxed complete with studs, nuts, bearings, marine seal and dust cap.
Load Force Disc Rotor range for Trailers and Caravans – Product in Focus
SKU: DH58HTFG-10 -
Brake Kits and Parts, Trailer Parts
LoadForce DBC-225-DAC Trailer Brake Caliper Replaces Kodiak 225
LoadForce DBC-225-DAC Trailer Brake Caliper Replaces Kodiak 225

LoadForce DBC-225-DAC replacement for Kodiak 225 dacromet cast iron hydraulic trailer brake caliper. Found on some imported American designed trailers this caliper fits on 19mm (3/4 inch) up to 24mm disc. Comes complete with brake pads, stainless slide pins, brass union and bleed screws.
When connecting your new trailer brake caliper to hydraulic brake lines you must flush out the old brake fluid from the actuator (master cylinder or electric/hydraulic pump) and brake lines before connecting this new brake caliper.
Once flushed, then connect brake lines, refresh the system with new brake fluid and bleed air from the brake system.
Compatible with Dot 3 and Dot 4 brake fluid, however we do recommend using Dot 4 Brake fluid as it has higher moisture resistance. Failure to flush the system could void warranty.
The brake pads used in this caliper are a premium product specifically designed for trailer applications. Large trailers carrying heavy loads can generate very high brake temperatures. The heavy duty asbestos free friction material formulation used in the LoadForce product is capable of handling high temperatures for long time periods and minimizes the chances of brake fade.
This brake caliper comes with a set of disc pads.
SKU: DBC-225-DAC -
Brake Kits and Parts, Trailer Parts
LoadForce Disc Brake Pad Set for Deemaxx Calipers
LoadForce Disc Brake Pad Set for Deemaxx Calipers

LoadForce disc brake pad set for Deemaxx calipers. Set of 4 brake pads.
The LoadForce trailer brake pad and trailer brake shoe range is a premium product specifically designed for trailer applications. Large trailers carrying heavy loads can generate very high brake temperatures. The heavy duty asbestos free friction material formulation used in the LoadForce product is capable of handling high temperatures for long time periods and minimizes the chances of brake fade.
SKU: DPDMX -
Brake Kits and Parts, Trailer Parts
LoadForce disc brake pad set for TA100 and TA200 – DPT
LoadForce disc brake pad set for TA100 and TA200 – DPT

LoadForce™ disc brake pad set. Comes as a set of 4. These brake pads suit the LoadForce TA100 mechanical and TA200 hydraulic brake caliper models. They will also suit Trigg A100 mechanical, Trigg A200 hydrualic, ARK mechanical, Al-Ko mechanical caliper and Meher brake calipers.
The LoadForce trailer brake pad and trailer brake shoe range is a premium product specifically designed for trailer applications. Large trailers carrying heavy loads can generate very high brake temperatures. The heavy duty asbestos free friction material formulation used in the LoadForce product is capable of handling high temperatures for long time periods and minimizes the chances of brake fade.
Load Force TA100 Mechanical Trailer Brake Caliper – Product in Focus
SKU: DPT -
Brake Kits and Parts, Trailer Parts
LoadForce Disc Brake Pad Set for TA300 – DPTA300
LoadForce Disc Brake Pad Set for TA300 – DPTA300

The trailer disc brake pad set of 4 fits LoadForce TA300 & TA400, caliper models. It also fits Al-Ko, Meher, Trojan AU, and Trojan MK7 brake calipers.
The trailer brake pad and trailer brake shoe range is a premium product specifically designed for trailer applications. Large trailers carrying heavy loads can generate very high brake temperatures. The heavy-duty asbestos-free friction material formulation used in the LoadForce product is capable of handling high temperatures for long time periods and minimizes the chances of brake fade.
Load Force TA300 Hydraulic Trailer Brake Caliper – Product in Focus
SKU: DPTA300 -
-
Brake Kits and Parts, Trailer Parts
LoadForce TA100 Mechanical Brake Caliper – Galvanised Cast Iton
LoadForce TA100 Mechanical Brake Caliper – Galvanised Cast Iton

LoadForce TA300 hydraulic galvanised cast iron brake calliper with a stainless steel piston. An improved design that directly replaces the Trojan AU caliper which is fitted with phenolic plastic pistons. Phenolic pistons are renowned for swelling and eventually seizing in the calliper. The Loadforce TA300 trailer brake calliper eliminates this fault by using a billet stainless steel piston.
The TA300 trailer brake caliper fits 1/2 inch up to 5/8 inch rotor thickness and is also designed to be a replacement for the Trigg A200 caliper.
1 x TA300BOLTKIT required for mounting. A HU4 union and CW1 copper washer are also required for the installation of the brake line to the caliper.
Before connecting your new brake caliper to hydraulic brake lines you must flush out the old brake fluid from the actuator (master cylinder or electric/hydraulic pump) and brake lines before connecting this new brake caliper.
Once flushed, then connect brake lines, refresh the system with new brake fluid and bleed air from the brake system.
Compatible with Dot 3 and Dot 4 brake fluid, however we do recommend using Dot 4 Brake fluid as it has higher moisture resistance. Failure to flush the system could void warranty.
The brake pads used in this caliper a premium product specifically designed for trailer applications. Large trailers carrying heavy loads can generate very high brake temperatures. The heavy duty asbestos free friction material formulation used in the LoadForce product are capable of handling high temperatures for long time periods and minimizes the chances of brake fade.
This trailer brake caliper comes with brake pads.
Load Force TA100 Mechanical Trailer Brake Caliper – Product in Focus
SKU: TA100 -
Brake Kits and Parts, Trailer Parts
LoadForce TA200 Hydraulic Trailer Brake caliper Replacement for Trigg A200
Brake Kits and Parts, Trailer PartsLoadForce TA200 Hydraulic Trailer Brake caliper Replacement for Trigg A200
LoadForce TA200 Hydraulic Trailer Brake caliper Replacement for Trigg A200

LoadForce TA200 hydraulic trailer brake caliper galvanized cast iron. Fits on 1/2 inch up to 5/8 inch rotor width.
Caliper includes brake pads and stainless steel slide tubes. This trailer brake caliper directly replaces the Trigg A200 caliper.
The TA200 has been upgraded with a conventional square section piston seal over the O-ring type used by most others on the market.
2 x A100BOLT caliper bolts required for mounting. HU4 union and CW1 copper washer are required for the installation of the brake lines to the TA200 brake caliper.
The brake pads used in this caliper a premium product specifically designed for trailer applications. Large trailers carrying heavy loads can generate very high brake temperatures. The heavy-duty asbestos-free friction material formulation used in the LoadForce product is capable of handling high temperatures for long time periods and minimizes the chances of brake fade.
SKU: TA200 -
Brake Kits and Parts, Trailer Parts
LoadForce TA300 Hydraulic Disc Brake Caliper
LoadForce TA300 Hydraulic Disc Brake Caliper

LoadForce TA300 hydraulic galvanised cast iron brake calliper with a stainless steel piston. An improved design that directly replaces the Trojan AU caliper which is fitted with phenolic plastic pistons. Phenolic pistons are renowned for swelling and eventually seizing in the calliper. The Loadforce TA300 trailer brake calliper eliminates this fault by using a billet stainless steel piston.
The TA300 trailer brake caliper fits 1/2 inch up to 5/8 inch rotor thickness and is also designed to be a replacement for the Trigg A200 caliper.
1 x TA300BOLTKIT required for mounting. A HU4 union and CW1 copper washer are also required for the installation of the brake line to the caliper.
Before connecting your new brake caliper to hydraulic brake lines you must flush out the old brake fluid from the actuator (master cylinder or electric/hydraulic pump) and brake lines before connecting this new brake caliper.
Once flushed, then connect brake lines, refresh the system with new brake fluid and bleed air from the brake system.
Compatible with Dot 3 and Dot 4 brake fluid, however we do recommend using Dot 4 Brake fluid as it has higher moisture resistance. Failure to flush the system could void warranty.
The brake pads used in this caliper a premium product specifically designed for trailer applications. Large trailers carrying heavy loads can generate very high brake temperatures. The heavy duty asbestos free friction material formulation used in the LoadForce product are capable of handling high temperatures for long time periods and minimizes the chances of brake fade.
This trailer brake caliper comes with brake pads.
Load Force TA300 Hydraulic Trailer Brake Caliper – Product in Focus
SKU: TA300 -
Boating Accessories, Fillers, Fillers, Fuel Tanks & Accessories
Lockable Deck Filler – 50mm Diesel (29668)
Boating Accessories, Fillers, Fillers, Fuel Tanks & AccessoriesLockable Deck Filler – 50mm Diesel (29668)
Lockable Deck Filler – 50mm Diesel (29668)
• Cylinder lock made from marine grade stainless steel.
• Designed when locked the cap revolves freely but cannot be opened.Features:
Part No.: 29668
Description: Lockable Deck Filler
Tail Diameter (mm): 50
Label: DieselSKU: 29668 -
Seat Pedestals and Swivels, Seating
Locking Seat Swivel (293800)
Locking Seat Swivel (293800)
• Handle extends out 175mm from swivel providing a easy to reach lock.
• Nylon slide runners for a smooth and silent performance.
• Fits most standard seats and pedestals.
• PPG coated for corrosion resistance.
• 12 lock positions.Features:
Part No.: 293800
Description: Steel Lock SwivelSKU: 293800 -
Anchoring and Mooring, Bow and Anchor Rollers
Lone Star Marine CR135 Deck Roller
Lone Star Marine CR135 Deck Roller

- Latest LSM Deck Roller Product
- With 135mm rollers
- Curved Roller Design for better line lay & higher capacity
- Ideal for GX1 & GX2 size drum winches
- Captive Design
- Adjustable Height
- High Polished 5mm 316SS Base (Australian Made)
- HD UV stabilized roller, extruded & machined in Australia
- Curved design for better line lay and capacity
- 2 predrilled countersunk mounting holes
- Includes mounting hardware
SKU: CR135 -
Anchoring and Mooring, Bow and Anchor Rollers
Lone Star Marine CX315 Bow Sprit
Lone Star Marine CX Bow Sprit CX315

The Lone Star CX range features durable heavy gauge 316SS in a mirror-like finish. With a wider opening than our SLR series, the CX range is suitable for almost any anchor and style. These are static sprits with no hinge or moving parts and are favoured by commercial fishermen and those who are seeking ultra-tough anchoring accessories, these sprits are meant to be used day in day out.
Rollers are made in durable HD with a 10 year UV life. The bolts are custom machined with a sleek button finish, a much better look than nyloc nuts and hex head bolts.
CX series bow spirits are 100% Australian made with all extrusions, machining, stainless steel, and polishing in house.
Available in 4 sizes for boats to 60ft + and anchors to 50kg.
SKU: CX315 -
Anchoring and Mooring, Winches
Lone Star Marine GX1 Winch
Lone Star Marine GX1 Winch
The GX1 is the strongest, fastest, winch of its size on the market today. They have been designed to fit into the smallest of anchor wells and are ideal for anglers in craft up to 6m when used in saltwater, and even larger boats for placid water use. Each GX series winch features custom engineered drive components to deliver a faster speed with an amazing amount of grunt. No bushes, split pins, actuators, springs, clutches, or additional circuitry to fail. Nothing extra to buy. Just fast, reliable anchoring.
Ideal for boats to 6 meters
Every Lone Star Marine Drum Winch Includes a 5 + Life Warranty
- 600W Purpose Built Permanent Magnet Motor, 4 Brush Design
- IP68 (Fully Waterproof)
- Machined Solid 316SS Spool Shaft
- High Polished 6mm 316SS Plate Construction
- Twin Shaft Bearing Design, Triple Sealed (LSM Exclusive)
- Machined Roller Bearing Cover (triple sealed)
- No Paint or Silicon Sealants
- No Mild steel outputs or fittings
- Fully Waterproof Machined Motor (LSM Exclusive)
- Prerigged with Tinned Cable Leads for Easier fitting
- Machined (not cast) Fastchange Collar
- Perfect for Deck Mounting
- Holds 60m of 6mm Rope + 8m x8mm topshot & 7m of 6mm chain
- Drop/Retrieve up to 126Ft (39m) per minute
- 12 Adjustable Gear/Motor Mounting Positions
- Manual Release Feature in the event of power loss
- 3000kg Holding Power at Anchor-No need to tie off
- Huge 1100kg Max Pull (empty drum)
- 100kg max recommended working load
- All 316SS and Machined 6160 Alloy Construction
- Rounded Style Transmissions for easier fitting-Made in Italy
- Designed and Manufactured in Australia
- Holds 60m x 6mm rope + 8m x 8mm topshot & 7m x 6mm SL Chain
- Larger Capacity Dyneema Kits are available
Each Kit Includes the Following as Standard
- Winch
- 6mm Base Plate
- 400 Amp Solenoid
- Genuine MP Marine Grade Circuit Breaker (made in the USA)
- Anodized Alloy Toggle Switch Panel
- All Nuts, Bolts, & Washers Needed for Installation
- Warranty Information, Switch Panel Template, Installation Instructions
SKU: GX1 -
Anchoring and Mooring, Winches
Lone Star Marine GX1 Winch Combo
Lone Star Marine GX1 600W Electric Drum Anchor Winch Combo
- Comes with 60m Double Braid 6mm Nylon Rope
- Comes with 7m Short Link 6mm Chain
- Comes with 6m Chain Guard
- Comes with Medium Stainless Steel Swivel
- Suits up to 6m Boats
- 5 Year + Life Warranty
- Perfect for small anchor wells
- Compact Fram
- Emergency Manual Release
- High Speed and Torque in a Micro Frame
- Fully Seated Motor and Gearbox
Specifications
- Max Retrieval Rate: 39m per Minute
- Max Fall Rate: 39m per Minute
- Power Supply: 12V DC
- Motor: 600 WATT
- Drum Size: 200MM
- Machined Solid 24mm Stainless Steel 1 Piece Shaft
- Holding Power at Anchor: 300kg (no need to tie off)
- Max Pull (empty drum): 1100kg
- Recomended Working Load: 100kg
Package Includes
- 1 x 600 Watt GX1 Lone Star Anchor Drum Winch
- 1 x Rope and Chain Kit (includes 1 x 60m Double Braid 6mm Nylon Rope and 1 x 7m Short Link 6mm Chain)
- 1 x Chain Guard (6m)
- 1 x Stainless Steel Swivel
- 1 x Circuit Breaker MP Marine Grade (Made in the USA)
- 1 x Anodized Alloy Toggle Switch Panel
- 1 x Marine Grade 400A Anchor Solenoid
- 1 x 6MM Stainless Steel Base Plate
- All Fixing Hardware
SKU: gx1combo -
Anchoring and Mooring, Winches
Lone Star Marine GX2 Winch
Lone Star Marine GX2 Winch
Australia’s most popular winch model, you may have seen the GX2 in the famed Drum Winch Shootout. The GX2 boasts jaw dropping longevity and performance and is available with 5 different rope & chain combinations to suit most vessels to 7m and a variety of anchoring styles. The GX™ series have become the new workhorse & standard in perfectly engineered anchoring systems at the right price. Featuring all Australian Made 316 stainless and machined & anodized 6061 T-6 aluminium construction, “Real Italian” transmissions, triple sealed bearings, twin shaft bearing systems, machined slimline ‘fast change’ collars, & an all new emergency release as standard on all models. Motors are once again custom manufactured exclusively for LSM and are pre-rigged with twin leads for easy installation. From the company with so many Worlds First under its belt, we are proud to have created the first anchor winch motor with an IP68 rating (AS/NZS 60529). This silicon free, glue free, paint free design has been achieved utilizing the latest modern manufacturing techniques, right here in AU. Most importantly, GX Series winches are made to get wet! From small recreational boats to Commercial Vessels over 60ft, there is a GX Series winch just right for your boat and application. All backed by our famous 5 + Life Warranty.
Performance, reliability & raw power in a compact frame design, the GX2 is the answer for most trailer boat fishermen. Thanks to the well oversized gearing and motor this unit can easily be fitted to boats to 7m for saltwater use and much larger for freshwater applications.
- Huge 1000W Motor
- Perfect for wet wells and deck mounts
- Boats to 7m
- Fast Drop/Retrieval Rating
- Fully Sealed Motor and Gearbox
- Designed & Manufactured in Australia
Everyone wants more power….so we listened! The GX2 features an oversized 1000W motor in wider yet shorter design than its predecessor for more versatile mounting. Each GX series winch features custom engineered drive components to deliver a faster speed with an amazing amount of grunt. No bushes, split pins, actuators, springs, clutches, or additional circuitry to fail. Nothing extra to buy. Just fast, reliable anchoring.
Ideal for boats to 7 meters plus
Every Lone Star Marine Drum Winch Includes a 5 + Life Warranty
- 1000W Purpose Built Permanent Magnet Motor, 4 Brush Design
- IP68 (Fully Waterproof)
- Machined Solid 25mm 316SS Spool Shaft
- High Polished 6mm 316SS Plate Construction Throughout
- Twin Shaft Bearing Design, Triple Sealed (LSM Exclusive)
- Machined Roller Bearing Cover (triple sealed)
- No Paint or Silicon Sealants
- No Mild steel outputs or fittings
- Fully Waterproof Machined Motor (LSM Exclusive)
- Prerigged with tinned cable leads for easier fitting
- Machined (not cast) Fastchange Collar
- Perfect for Deck Mounting
- Holds 90m of 8mm Rope + 7m x 8mm chain
- Larger Capacity Dyneema Kits are Available
- Drop/Retrieve up to 156Ft (46m) per minute
- 12 Adjustable Gear/Motor Mounting Positions
- Manual Release Feature in the event of power loss
- 3000kg Holding Power at Anchor-No need to tie off
- Huge 1360kg Max Pull (empty drum)
- 110kg max recommended working load
- All 316SS and Machined 6160 Alloy Construction
- Rounded Style Transmissions for easier fitting-Made in Italy
- Designed and Manufactured in Australia
Each Kit Includes the Following as Standard
- Winch
- 6mm Base Plate
- 400 Amp Solenoid
- Genuine MP Marine Grade Circuit Breaker (made in the USA)
- Anodized Alloy Toggle Switch Panel
- All Nuts, Bolts, & Washers Needed for Installation
- Warranty Information, Switch Panel Template, Installation Instructions
SKU: GX2 -
Anchoring and Mooring, Winches
Lone Star Marine GX2 Winch Combo
Lone Star Marine GX2 1000W Electric Drum Anchor Winch Combo
- Comes with 90m of Double Braid, 8mm Nylon Rope
- Comes with 7m of Short Link 8mm Chain
- Comes with Deck Roller (Model CR135)
- Comes with 8m Chain Guard
- Suits up to 8m Boats
- 5 Year + Life Warranty
- Perfect for small anchor wells
- Compact Fram
- Emergency Manual Release
- High Speed and Torque in a Micro Frame
- Fully Seated Motor and Gearbox
Specifications
- Max Retrieval Rate: 46m per Minute
- Max Fall Rate: 46m per Minute
- Power Supply: 12V DC
- Motor: 1000 WATT
- Drum Size: 250MM
- Machined Solid 24mm Stainless Steel 1 Piece Shaft
- Holding Power at Anchor: 3000kg (no need to tie off)
- Max Pull (empty drum): 1360kg
- Recomended Working Load: 110kg
Package Includes
- 1 x 1000 Watt GX2 Lone Star Anchor Drum Winch
- 1 x Rope and Chain Kit (including 120m Double Braid 6mm Nylon Rope and 7m Short Link 8mm Chain)
- 1 x Deck Roller (Model CR135)
- 1 x Chain Guard (8m)
- 1 x Stainless Steel Anchor Swivel
- 1 x Circuit Breaker MP Marine Grade (Made in the USA)
- 1 x Anodized Alloy Toggle Switch Panel
- 1 x Marine Grade 400A Anchor Solenoid
- 1 x 6mm Stainless Steel Base Plate
- All Fixing Hardware
SKU: gx2combo -
Anchoring and Mooring, Winches
Lone Star Marine GX3 Winch
Lone Star Marine GX3 Winch
Even more capacity in the same footprint. The GX3 features an oversized 1500W motor (250w power upgrade!) on a slightly wider 300mm frame for more capacity. Despite the wider frame the overall width is the same as its predecessor thanks to the slimline fast-change bearing collar design. Each GX series winch features custom engineered drive components to deliver a faster speed with an amazing amount of grunt. No bushes, split pins, actuators, springs, clutches, or additional circuitry to fail. Nothing extra to buy. Just fast, reliable anchoring.Ideal for boats to 9m
Every Lone Star Marine Drum Winch Includes a 5 + Life Warranty
- 1500W Purpose Built Permanent Magnet Motor, 4 Brush Design
- IP68 (Fully Waterproof)
- Machined Solid 25mm 316SS Spool Shaft
- High Polished 6mm 316SS Plate Construction Throughout
- Twin Shaft Bearing Design, Triple Sealed (LSM Exclusive)
- Machined Roller Bearing Cover (triple sealed)
- No Paint or Silicon Sealants
- No Mild steel outputs or fittings
- Fully Waterproof Machined Motor (LSM Exclusive)
- Prerigged with tinned cable leads
- Machined (not cast) Fastchange Bearing Collar
- Perfect for Deck Mounting
- Capacity 130m of 8mm Rope + 10m x 8mm chain or
- 95m x 10mm rope plus 10m x 8mm chain
- Drop/Retrieve up to 156Ft (46m) per minute
- 12 Adjustable Gear/Motor Mounting Positions
- Manual Release Feature in the event of power loss
- 3500kg Holding Power at Anchor-No need to tie off
- Huge 1500kg Max Pull (empty drum)
- 110kg max recommended working load
- All 316SS and Machined 6160 Alloy Construction
- Rounded Style Transmissions for easier fitting-100% Made in Italy
- Designed and Manufactured in Australia
Each Kit Includes the Following as Standard
- Winch
- 6mm Base Plate
- 400 Amp Solenoid
- Genuine MP Marine Grade Circuit Breaker (made in the USA)
- Anodized Alloy Toggle Switch Panel
- All Nuts, Bolts, & Washers Needed for Installation
- Warranty Information, Switch Panel Template, Installation Instructions
SKU: GX3 -
Anchoring and Mooring, Winches
Lone Star Marine GX3 Winch Combo
Lone Star Marine GX3 1500W Electric Drum Anchor Winch Combo
- Comes with 95m Double Brain 10mm Nylon Rope
- Comes with 9m Short Link 8mm Chain
- Suits up to 9m Boats
- 5 Year + Life Warranty
- Perfect for wet wells and deck mounts
- For large capacity trailer boats and commercial use
- Compact Frame
- Emergency Manual Release
- High Speed and Torque in a Micro Frame
- Fully Seated Motor and Gearbox
Specifications
- Max Retrieval Rate: 42m per Minute
- Max Fall Rate: 42m per Minute
- Power Supply: 12V DC
- Motor: 1500 WATT
- Drum Size: 300mm
- Machined Solid 30mm Stainless Steel 1 Piece Shaft
- Holding Power at Anchor: 3500kg (no need to tie off)
- Max Pull (empty drum): 1500kg
- Recomended Working Load: 120kg
Package Includes
- 1 x 1500 Watt GX3 Lone Star Anchor Drum Winch
- 1 x Rope and Chain Kit (Includes 95m Double Braid 10mm Nylon Rope and 9m Short Link 8mm Chain)
- 1 x Deck Roller (Model CR195)
- 1 x 10m Chain Guard
- 1 x Stainless Steel Anchor Swivel
- 1 x Circuit Breaker MP Marine Grade (Made in the USA)
- 1 x Anodized Alloy Toggle Switch Panel
- 1 x Marine Grade 400A Anchor Solenoid
- 1 x 6MM Stainless Steel Base Plate
- All Fixing Hardware
SKU: gx3combo -
Boating Accessories, Hinges
Long Stainless Steel Strap Hinge (29711)
Long Stainless Steel Strap Hinge (29711)
• 304G stainless steel.
• Solid stainless steel pivot pin.Features:
Part No:29711
Description:125 mm Hinge
Length(mm):130
Width(mm):40
Thickness(mm):2
No Mount Holes:7
Mount Holes CS(mm):5
Length Split(mm):96/44SKU: 29711 -
-
Lighting
Low Profile LED Courtesy Light (709664)
Low Profile LED Courtesy Light (709664)
• Bright and durable surface mount illumination suitable for a variety of indoor or outdoor applications.
• 1 x Japanese nichia 3535 LED sealed in epoxy.
• Polycarbonate optical lens.
• 304G stainless steel cover.
• Includes : 228mm tinned wire. 4 x 4 gauge screws.
• Waterproof rating of IP66.
• Rated at 50000 hours.Features:
Part No: 709664
LED Colour: Cool White
Lumens: 50
Diameter (mm): 38
Volts: 12
Amps: 0.1
Watts: 1.2SKU: 709664 -
Lighting
Low Profile LED Courtesy Light (709666)
Low Profile LED Courtesy Light (709666)
• Bright and durable surface mount illumination suitable for a variety of indoor or outdoor applications.
• 1 x Japanese nichia 3535 LED sealed in epoxy.
• Polycarbonate optical lens.
• 304G stainless steel cover.
• Includes : 228mm tinned wire. 4 x 4 gauge screws.
• Waterproof rating of IP66.
• Rated at 50000 hours.Features:
Part No: 709666
LED Colour: Blue
Lumens: 50
Diameter (mm): 38
Volts: 12
Amps: 0.1
Watts: 1.2SKU: 709666 -
Lowrance, Lowrance Accessories, Simrad, Simrad Accessories
Lowrance / Simrad 3G/4G Radar to HALO Dome converter cable
Lowrance, Lowrance Accessories, Simrad, Simrad AccessoriesLowrance / Simrad 3G/4G Radar to HALO Dome converter cable
Lowrance / Simrad 3G/4G Radar to HALO Dome converter cable
Adaptor cable to retrofit a HALO Dome Radar to a 3G/4G installation. Fits into the cable void under the dome and allows you to use your 3G/4G Broadband Radar cable for a HALO Dome Radar installation.
SKU: 000-14551-001 -
Lowrance, Lowrance Accessories, Simrad, Simrad Accessories
Lowrance / Simrad AT10HD Adaptor SimNet Heading to HD Digital Radar Processor
Lowrance, Lowrance Accessories, Simrad, Simrad AccessoriesLowrance / Simrad AT10HD Adaptor SimNet Heading to HD Digital Radar Processor
Lowrance / Simrad AT10HD Adaptor SimNet Heading to HD Digital Radar Processor
The Simnet heading sensor input converts AT10HD, NMEA 0183 fast heading data to Simnet format.
SKU: 24006694

















