Uflex Water Temperature Gauge (86128)
• For all 12 volt electrical systems.
• Ultra white dial with a stainless steel bezel.
• Domed glass lens.
• 53mm mounting hole required for installation.
• Requires a water temperature sender.
Features:
Part No.: 86128
Description: Water Temperature Gauge – White
Volts: 12
You must be logged in to post a review.
NGK Boat/Marine Spark Plug – DR7EA.
*Please check the codes and images to ensure this item is suitable for your needs. If you are unsure whether it is suitable please contact us with your motor details (i.e. serial number, model number, year, horsepower, brand, etc), and we can assist you.
Black rubber, cup style, used to feed water into the cooling system of an engine to flush out salt, sand and other debris after use, or simply to check your enqine performance prior to launching. Uses a sturdy powder coated steel spring to powerfully clamp on to the outboard’s leg and seal the rubber, maximising water pressure. Suits most medium to large sterndrive & outboards with side water inlets on the lower leg/drive unit (*If unsure whether these are suitable please check your owners manual or contact us with your motor details). Easy to connect – Simply slide cups over the top of the water intake slots, & connect your garden hose to the quick connect male fitting moulded into side (refer images).
*Please note: As a guide if an engine does not start pumping water after 4 to 5 seconds of using these flushers turn engine off and reposition flushers/ear muffs to prevent over heating/water pump burnout, and try again. If this does not fix the problem, turn off engine and seek advice.
Sizing Chart & Suitability:
| Shape | Rubber Size (mm) | Suitable For |
| Small Round | 90 | Small Outboards |
| Oval | 120 x 90 | Medium to Large |
| Rectangle | 130 x 85 | Medium to Large |
Efficient dual intake universal motor flusher with large pliable oval cups for excellent water seal. Strong metal springs keeps cups firmly against motor inlets. Standard quick click on hose fitting supplied for easy connection.
Genuine Yamaha Oil Mix Ratio Bottle. Marked with 25:1 / 50:1 /100:1 graduations; makes pre-mixing fuel and oil accurate and easy.
*Please check the codes and images to ensure this item is suitable for your needs. If you are unsure whether it is suitable please contact us with your motor details (i.e. serial number, model number, year, horsepower, brand, etc), and we can assist you.
There are no reviews yet.