Stainless Steel Rectangular Louvre Vents (30504)
• Used where permanent ventilation is required.
• Quality 304G Stainless Steel.
Features:
Part No: 30504
Description: Stainless Steel Louvre Vent
Length (mm): 127
Width (mm): 115
Height (mm): 0.8
Mount Holes (mm): 6 x 4
You must be logged in to post a review.
Standard Plastic Bathyscopes (70102)
Features:
Part No.: 70102
Viewer: 2 Piece
Height (mm): 480
Lens Diameter (mm): 300
Handle Diameter (mm): 345
Colour: Orange
Black rubber, cup style, used to feed water into the cooling system of an engine to flush out salt, sand and other debris after use, or simply to check your enqine performance prior to launching. Uses a sturdy powder coated steel spring to powerfully clamp on to the outboard’s leg and seal the rubber, maximising water pressure. Suits most medium to large sterndrive & outboards with side water inlets on the lower leg/drive unit (*If unsure whether these are suitable please check your owners manual or contact us with your motor details). Easy to connect – Simply slide cups over the top of the water intake slots, & connect your garden hose to the quick connect male fitting moulded into side (refer images).
*Please note: As a guide if an engine does not start pumping water after 4 to 5 seconds of using these flushers turn engine off and reposition flushers/ear muffs to prevent over heating/water pump burnout, and try again. If this does not fix the problem, turn off engine and seek advice.
Sizing Chart & Suitability:
| Shape | Rubber Size (mm) | Suitable For |
| Small Round | 90 | Small Outboards |
| Oval | 120 x 90 | Medium to Large |
| Rectangle | 130 x 85 | Medium to Large |
ADJUSTABLE UNIVERSAL WHITE MOUNT PLATE WITH LEG
Fits standard gunnel mount or transom mounting
Fitted with swivel lock
Holder made from UV resistant polypropylene plastic (PP)
Plastic colour: White
Pole made from aluminium
Multiple angle adjustment
Mounting plate size: 100mm L x 62mm W
Gunnel tube length: 300mm
Packaging: Shrink wrap plastic
There are no reviews yet.