Stainless Steel Anti-Rattle Barrel Bolt (30292)
• 316G stainless steel.
• Highly polished.
• 7 countersunk screws needed.
Features:
Part No.:30292
Description: 105mm Stainless Steel Barrel Bolt Anti-Rattle
Dimensions (mm): 105 x 32
Mounting Holes: 7 x 4mm
You must be logged in to post a review.
White Nylon Scupper Valve (45486)
• Made from white nylon material with a rubber flap valve that opens to let water out then seals back to prevent water entering.
• Supplied with stainless steel screws.
Features:
Part No.: 45486
Description: White Nylon Scupper Valve
Diameter (mm): 70
Mount Holes (mm): 4 x 3
Manufactured from highly polished corrosion resistant stainless steel for extreme durability in the harsh outdoor environment. Heavy duty cutting blades are sharpened to cut easily through wire and braided line up to 1.8mm in diameter.
Quality spring action and soft grip allow the tool to be comfortable and easy use. Includes quick and simple one handed locking/unlocking mechanism.
Black rubber, cup style, used to feed water into the cooling system of an engine to flush out salt, sand and other debris after use, or simply to check your enqine performance prior to launching. Uses a sturdy powder coated steel spring to powerfully clamp on to the outboard’s leg and seal the rubber, maximising water pressure. Suits most medium to large sterndrive & outboards with side water inlets on the lower leg/drive unit (*If unsure whether these are suitable please check your owners manual or contact us with your motor details). Easy to connect – Simply slide cups over the top of the water intake slots, & connect your garden hose to the quick connect male fitting moulded into side (refer images).
*Please note: As a guide if an engine does not start pumping water after 4 to 5 seconds of using these flushers turn engine off and reposition flushers/ear muffs to prevent over heating/water pump burnout, and try again. If this does not fix the problem, turn off engine and seek advice.
Sizing Chart & Suitability:
| Shape | Rubber Size (mm) | Suitable For |
| Small Round | 90 | Small Outboards |
| Oval | 120 x 90 | Medium to Large |
| Rectangle | 130 x 85 | Medium to Large |
Black rubber, cup style, used to feed water into the cooling system of an engine to flush out salt, sand and other debris after use, or simply to check your enqine performance prior to launching. Uses a sturdy powder coated steel spring to powerfully clamp on to the outboard’s leg and seal the rubber, maximising water pressure. Suits most medium to large sterndrive & outboards with side water inlets on the lower leg/drive unit (*If unsure whether these are suitable please check your owners manual or contact us with your motor details). Easy to connect – Simply slide cups over the top of the water intake slots, & connect your garden hose to the quick connect male fitting moulded into side (refer images).
*Please note: As a guide if an engine does not start pumping water after 4 to 5 seconds of using these flushers turn engine off and reposition flushers/ear muffs to prevent over heating/water pump burnout, and try again. If this does not fix the problem, turn off engine and seek advice.
Sizing Chart & Suitability:
| Shape | Rubber Size (mm) | Suitable For |
| Small Round | 90 | Small Outboards |
| Oval | 120 x 90 | Medium to Large |
| Rectangle | 130 x 85 | Medium to Large |
There are no reviews yet.