-
×
Heavy-Duty Battery Trays (23672)
1 × $18.60
Subtotal: $18.60
SHURflo Float Switch 
• Fully submersible with anti-airlock protection.
• Stainless steel shaft.
• Tough nylon impeller and baseplate construction.
• Transom mount with 1.8m (6ft) tinned wire for easy installation.
• Mounting clip suits 23224 SHURflo Bilge Pump Float Switch*.
• Built in mounting.
• CE Certified, Ignition Protected ISO 8846.
• RCM Certified to Australian Standards.
| Part No. | SAW-23224 |
| Length | 112mm |
| Width | 92mm |
| Height | 32mm |
| Volts | 12V/24V |
| Amps (Max) | 12 Amp / 6 Amp |
Installation & Maintenance
You may also like…
-
Bilge Pumps, Pumps and Plumbing
SHURflo Bilge Pumps – 12V 500GPH / 700GPH / 1000GPH
SHURflo Bilge Pumps
• Fully submersible with anti-airlock protection.
• Stainless steel shaft.
• Tough nylon impeller and baseplate construction.
• Transom mount with 1.8m (6ft) tinned wire for easy installation.
• Mounting clip suits 23224 SHURflo Bilge Pump Float Switch*.
• Built in mounting.
• CE Certified, Ignition Protected ISO 8846.
• RCM Certified to Australian Standards.Part No. SAW-232100 SAW-232101 SAW-232102 Length – – – Width 74mm (C) 74mm (C) 74mm (C) Height 112mm (A) 112mm (A) 112mm (A) Depth 96mm (B) 96mm (B) 96mm (B) Volts 12V 12V 12V Amps (Max) 1.8 Amp 3.2 Amp 3.2 Amp Series 500 700 1000 Max. Head 7.5ft 10ft 11ft Outlet Dia. 3/4 inch 3/4 inch 1 ⅛ inch Head 0ft 500 GPH (1893 LPH) 700 GPH (2650 LPH) 1000 GPH (3785 LPH) Head 3ft 430 GPH (1628 LPH) 600 GPH (2271 LPH) 840 GPH (3180 LPH) Installation & Maintenance Manual
SKU: SAW-232100, SAW-232101, SAW-232102 -
Bilge Pumps, Pumps and Plumbing
SHURflo Bilge Pumps – 12V 1500GPH / 2000GPH
SHURflo Bilge Pumps – 12V 1500GPH / 2000GPH
• Tough nylon heavy duty housing construction.
• Patented water cooled motor ensures high performance and long life.
• Fully submersible with anti-airlock protection.
• Patented snap swivel base with 1.8m (6ft) tinned wire for easy installation.
• CE Certified, Ignition Protected ISO 8846.
• RCM Certified to Australian Standards.Part No. SAW-232104 SAW-232106 Length 184mm 184mm Width 154mm 154mm Volts 12V 12V Amps (Max) 8 Amp 10 Amp Series 1500 2000 Max. Head 14ft 18ft Outlet Dia. 1 ⅛ inch 1 ⅛ inch Head 0ft 1800 GPH (6814 LPH) 2200 GPH (8328 LPH) Head 3ft 1700 GPH (6435 LPH) 2000 GPH (7571 LPH) Head 6ft 1600 GPH (6057 LPH) 1900 GPH (7192 LPH) Installation & Maintenance Manual
SKU: SAW-232104, SAW-232106
Related products
-
-
-
Electrical, Switches
Marinco® BEP ‘Contour’ Circuit Breaker Panels – No Meters (113142)
Marinco® BEP ‘Contour’ Circuit Breaker Panels – No Meters (113142)
- Durable grey powder coated marine grade aluminium base panel
- Marine quality, magnetic, hydraulic, UL listed trip free breakers
- Backlit labels supplied, refer page 101
- Suitable size negative busbar supplied, refer page 124
- Red LED indication for circuits ‘on’
- Green LED back lighting for meters and labels
- Double pole configurations available for survey or additional safety
Features:
BLA Code: 113142
Circuits: 8
Overall Size wxh mm: 127×200
Cut Out Size wxh mm: 107×180
Intrusion mm: 65
Mount Screws Gauge: 6 r/h
Power Volt: 12-24
Label Sheet: 1
Circuit Breakers:
5 amp – 2
10 amp – 2
15 amp – 3
20 amp – 1SKU: 113142 -
Electrical, Switches
Marinco® BEP Battery Distribution Cluster with DVSR – Single Engine Two Battery Banks (113654)
Electrical, SwitchesMarinco® BEP Battery Distribution Cluster with DVSR – Single Engine Two Battery Banks (113654)
Marinco® BEP Battery Distribution Cluster with DVSR – Single Engine Two Battery Banks (113654)
Pre-wired module combining 113553 Mini Battery Selector Switch and a dual sensing Voltage Sensitive Relay. With the selector switch in position 1, it becomes the sensing battery for the VSR. When the engine is first started the relay is open and remains open until the selected battery reaches a preset 13.4 volt. The relay closes at the rated voltage providing charge to both batteries. When the selected battery voltage drops below 12.8 volt, the DVSR disengages, separating the batteries and ensuring that battery 1 is not discharged by house loads. When the selector switch is in position 2, this becomes the sensing battery and the reciprocal occurs. When the selector switch is in the both position the DVSR is inactive and the charge and load is distributed evenly between the batteries. With this system the loads are run off the same battery as the engine starting battery.
Features:
BLA Code: 113654
Base mm: 138×69
Height mm: 69
Mount Holes mm: 5 r/hSKU: 113654
