Genuine Yamaha Bung Washers (90430-08020).
*Please check the codes and images to ensure this item is suitable for your needs. If you are unsure whether it is suitable please contact us with your motor details (i.e. serial number, model number, year, horsepower, brand, etc), and we can assist you.
You must be logged in to post a review.
Black rubber, cup style, used to feed water into the cooling system of an engine to flush out salt, sand and other debris after use, or simply to check your enqine performance prior to launching. Uses a sturdy powder coated steel spring to powerfully clamp on to the outboard’s leg and seal the rubber, maximising water pressure. Suits most small outboards with side water inlets on the lower leg/drive unit (*If unsure whether these are suitable please check your owners manual or contact us with your motor details). Easy to connect – Simply slide cups over the top of the water intake slots, & connect your garden hose to the quick connect male fitting moulded into side (refer images).
*Please note: As a guide if an engine does not start pumping water after 4 to 5 seconds of using these flushers turn engine off and reposition flushers/ear muffs to prevent over heating/water pump burnout, and try again. If this does not fix the problem, turn off engine and seek advice.
Sizing Chart & Suitability:
| Shape | Rubber Size (mm) | Suitable For |
| Small Round | 90 | Small Outboards |
| Oval | 120 x 90 | Medium to Large |
| Rectangle | 130 x 85 | Medium to Large |
Genuine Mercury Oil Filter Element (35-866340K01) – Supercedes/Replaces Genuine Quicksilver Oil Filter Element (35-866340Q03)
*Please check the codes and images to ensure this item is suitable for your needs. If you are unsure whether it is suitable please contact us with your motor details (i.e. serial number, model number, year, horsepower, brand, etc), and we can assist you.
NGK Boat/Marine Spark Plug – B8HS-10.
*Please check the codes and images to ensure this item is suitable for your needs. If you are unsure whether it is suitable please contact us with your motor details (i.e. serial number, model number, year, horsepower, brand, etc), and we can assist you.
Black rubber, cup style, used to feed water into the cooling system of an engine to flush out salt, sand and other debris after use, or simply to check your enqine performance prior to launching. Uses a sturdy powder coated steel spring to powerfully clamp on to the outboard’s leg and seal the rubber, maximising water pressure. Suits most medium to large sterndrive & outboards with side water inlets on the lower leg/drive unit (*If unsure whether these are suitable please check your owners manual or contact us with your motor details). Easy to connect – Simply slide cups over the top of the water intake slots, & connect your garden hose to the quick connect male fitting moulded into side (refer images).
*Please note: As a guide if an engine does not start pumping water after 4 to 5 seconds of using these flushers turn engine off and reposition flushers/ear muffs to prevent over heating/water pump burnout, and try again. If this does not fix the problem, turn off engine and seek advice.
Sizing Chart & Suitability:
| Shape | Rubber Size (mm) | Suitable For |
| Small Round | 90 | Small Outboards |
| Oval | 120 x 90 | Medium to Large |
| Rectangle | 130 x 85 | Medium to Large |
There are no reviews yet.