Garmin Y-cable (12pin transducer + 8-pin transducer to 12 pin Sounder)
Combine a Garmin transom mount scanning transducer with a Garmin or Airmar in-hull mounted transducer. Use this Y-cable to connect a 12-pin SideVü/Clearvü-only transducer along with an 8-pin 2D-only transducer into a single 12-pin (orange) port on a Garmin SideVü equipped sonar. This adapter cable allows compatible ECHOMAP, GPSMAP or STRIKER family sonar products to continue to display water depth from the in-hull transducer in instances when the transom mount transducer loses depth reading due to excess speed or cavitation.
Y-cable to connect an 8-pin 2-D-only transducer along with a 12-pin SideVü / Clearvü -only transducer into a single 12-pin (orange) port on a Garmin SideVü equipped sonar.
- This cable only works with specific SideVü / Clearvü transducers. There are currently only three of those; the GT30, GT34, and the GT36UHD
- This cable also only works with specific 2-D transducers. There are currently only 5 of those; GT8HW-IH, GT15M-IH, Airmar B60, Airmar P72, and Airmar P79
- Software setup is automatic with the GT8 and GT15. The Airmar transducers require a manual transducer selection
NOTE: This Y-Cable will not work with any GT or CV all-in-one transducer like GT40, GT41, GT50M, GT51M, GT52HW, GT54HW and GT56UHD.
NOTE: When using the 12-Pin + 8-Pin to 12-Pin sounder cable, user must manually select the transducer type they intend to use.
