Garmin 11mm Split Connector
Route cables without having to drill large holes in your vessel with this 11 mm split connector.
Route cables without having to drill large holes in your vessel with this 11 mm split connector.
Weight | 0.02 kg |
---|
Garmin Marine Heading Sensor Cable to Connect Marine Heading Sensor to NMEA 2000 Network [Garmin Part Number: 010-11419-00] – RRP $1290
Connect a heading sensor to a NMEA 2000 network with this 19.7 ft (6 m) cable.
THIS IS SUITABLE FOR CURRENT MODEL GARMIN GMR 18 xHD RADOME & GMR 24 xHD RADOME.
WHAT’S IN THE BOX:
* Garmin Marine Heading Sensor Cable – NMEA 2000
* Documentation
WARRANTY:
We are an authorised Australian Garmin retailer, as such Full Australian Manufacturers Warranty is applicable for this item. Please note if a Garmin unit is purchased overseas or from a non-authorised Garmin retailer you may not receive warranty coverage in Australia.
*Specifications from suppliers’ information.
Garmin Marine Heading Sensor for Radar [Garmin Part Number: 010-11417-00] – RRP $1200
When interfacing this 3-axis compass heading sensor to our marine lineup of MFDs and radars, mariners can expect unparalleled radar overlay performance and accuracy along with excellent MARPA capabilities.
This heading sensor (based on Airmar H2183) uses a rate gyro, so it can maintain an exceptional 2 degree heading accuracy under heavy dynamic conditions, with up to 30 degrees of pitch and roll. In addition, it supports either NMEA 0183 or NMEA 2000® data output to fit any installation.
Installation is a snap thanks to the heading sensor’s innovative design, allowing it to mount to any angled bulkhead. Mariners can expect this heading sensor to provide trouble-free service in the harshest conditions and will learn to appreciate its reliability and excellent performance.
* Note: NMEA 0183 and NMEA 2000 cables sold separately (to connect to a NMEA 2000 Network a dedicated NMEA 2000 Marine Heading Sensor Cable is required Garmin Part Number: 010-11419-00 – optional, please see related products).
THIS IS SUITABLE FOR CURRENT MODEL GARMIN GMR 18 xHD RADOME & GMR 24 xHD RADOME.
FEATURES:
* Better than 1 degree static heading accuracy
* Industry leading 2 degree dynamic accuracy up to 30 degree pitch and roll
* Three-axis solid-state compass provides accurate heading data
* Three-axis accelerometer improves heading, pitch and roll in static conditions
* Three-axis rate gyro improves heading, pitch and roll in dynamic conditions
* Temperature compensated across the entire operating range to ensure optimum accuracy
* Easy installation to any angled bulkhead
* Auto-calibration feature
SPECIFICATIONS:
* Dimensions (HxLxD): 2″ (5.08 cm) x 4.4″ (11.18 cm) x 4.5″ (11.43 cm)
* Default heading output: 10 Hz for both NMEA 0183 and NMEA 2000 (NMEA 2000 can be output up to 20 Hz)
* Waterproof housing: IPX6
* Operating voltage: 9 VDC to 16 VDC
WHAT’S IN THE BOX:
* Garmin Marine Heading Sensor
* Documentation
WARRANTY:
We are an authorised Australian Garmin retailer, as such Full Australian Manufacturers Warranty is applicable for this item. Please note if a Garmin unit is purchased overseas or from a non-authorised Garmin retailer you may not receive warranty coverage in Australia.
*Specifications from suppliers’ information.
This 18-inch high-definition radar dome pairs ease of use with advanced features typically found on open arrays for enhanced situational awareness.
If your boat has limited space for radar placement, this compact dome is for you.
It packs the power and echo definition you need, at all ranges.
When weather and sea conditions shift, the gain and sea filter do too — automatically.
See what’s close and far away with dual-range operation.
This 18-inch dome radar delivers 4-kW transmit power and clear echo definition at all ranges. It has a maximum range of 48 nautical miles (88 km) and 48- or 24-RPM rotation speeds for fast screen refreshes.
GMR™ 18 xHD features 8-bit true colour high resolution for outstanding target separation with less screen clutter on your chartplotter.
This radar doesn’t have any complex user settings to deal with, so it’s easy to install and start using.
Gain levels automatically adjust to optimum settings for harbours, near shore and offshore in open waters.
Gain automatically adjusts sea clutter for calm, medium and rough sea conditions.
This feature enables the fully independent split-screen display of far and close radar views.
You have the option to protect areas behind the radar from being radiated while providing full forward-looking radar capability. This also makes installation more flexible.
Overlay radar images onto your chartplotter’s map page. You can add an optional autopilot or heading sensor (sold separately) for best results.
GMR™ 18 xHD provides MARPA target tracking when combined with a multifunction display and heading sensor (sold separately).
Minn Kota 3m Wiring Loom/Harness for Electric Motor to Suit Minn Kota & Other Electric Motors
BLA Code: 602996
Wiring Harness for Electric Motor to Suit Minn Kota & Other Electric Motors
CADCO wiring looms are available in 3m (this listing) and 6m lengths and are made with 10mm quality marine grade tinned copper wire, a 50 amp circuit breaker, an Anderson plug kit and all terminals attached. The wiring is protected in a loom tube for neat installation.
Available in popular three and six metre lengths ready for installation these looms are manufactured using quality materials and fittings. Each cable features 10mm marine grade tinned copper wire, quality 50 amp BEP resettable circuit breaker, Anderson plug kit and fixed terminals.
For safety, protection, ease of installation and neatness each loom is supplied encased in black flame retardant corrugated conduit.
Note: For the installation of 24 volt motors the purchase of one 113676 300mm flexible terminal link is required (please see related products), allowing the connection from one batteries positive to the others negative. Full instructions with simple to follow pictures is included for easy installation.