Best Price
Showing 301–330 of 720 results
-
Electrical, Switches
Marinco® BEP Contour Generation 2 Splash Proof Switch Panels (113777)
Marinco® BEP Contour Generation 2 Splash Proof Switch Panels (113777)
Injection moulded plastic panel with modern contour styling. The switch tray features a rubber mounting gasket and integral cover seal. The cover includes a clear plastic membrane with rubber over-mould allowing the flexibility to operate the switches while providing a clear window for label backlighting. Red LED indicates systems on. Both grey and blue interchangeable contour wave strips are included and custom colours are available, subject to minimum quantities. Mounting screws are bidden beneath the cover. Panels can be mounted horizontally or vertically due to the unique label design. A joiner is available for multiple panel installations. Available in 2, 4 or 6 gang versions with a choice of grey or white facia and with or without fuses. Fused versions have each pair of switches connected to a behind panel mounted AF type blade fuse holder. Supplied as standard with two position, on/off switches and 113694, 28 piece label set. Three position switches, momentary switches and label set 113695 (below) are also available. Suitable for 12 or 24 volt systems. Switches rated to 16 amp. Overall width 63mm. Cut out width 42mm. Intrusion 25mm. Mount screws 3mm roundhead.
Features:
BLA Code: 113777
Facia Colour: White
Gang: 6
Fuses: No
Overall Length mm: 167
Cut Out Length mm: 132SKU: 113777 -
Electrical, Switches
Marinco® BEP Contour Generation 2 Splash Proof Switch Panels (113781)
Marinco® BEP Contour Generation 2 Splash Proof Switch Panels (113781)
Injection moulded plastic panel with modern contour styling. The switch tray features a rubber mounting gasket and integral cover seal. The cover includes a clear plastic membrane with rubber over-mould allowing the flexibility to operate the switches while providing a clear window for label backlighting. Red LED indicates systems on. Both grey and blue interchangeable contour wave strips are included and custom colours are available, subject to minimum quantities. Mounting screws are bidden beneath the cover. Panels can be mounted horizontally or vertically due to the unique label design. A joiner is available for multiple panel installations. Available in 2, 4 or 6 gang versions with a choice of grey or white facia and with or without fuses. Fused versions have each pair of switches connected to a behind panel mounted AF type blade fuse holder. Supplied as standard with two position, on/off switches and 113694, 28 piece label set. Three position switches, momentary switches and label set 113695 (below) are also available. Suitable for 12 or 24 volt systems. Switches rated to 16 amp. Overall width 63mm. Cut out width 42mm. Intrusion 25mm. Mount screws 3mm roundhead.
Features:
BLA Code: 113781
Facia Colour: Black
Gang: 6
Fuses: Yes
Overall Length mm: 167
Cut Out Length mm: 132SKU: 113781 -
Electrical, Switches
Marinco® BEP Contour Generation 2 Splash Proof Switch Panels (113782)
Marinco® BEP Contour Generation 2 Splash Proof Switch Panels (113782)
Injection moulded plastic panel with modern contour styling. The switch tray features a rubber mounting gasket and integral cover seal. The cover includes a clear plastic membrane with rubber over-mould allowing the flexibility to operate the switches while providing a clear window for label backlighting. Red LED indicates systems on. Both grey and blue interchangeable contour wave strips are included and custom colours are available, subject to minimum quantities. Mounting screws are bidden beneath the cover. Panels can be mounted horizontally or vertically due to the unique label design. A joiner is available for multiple panel installations. Available in 2, 4 or 6 gang versions with a choice of grey or white facia and with or without fuses. Fused versions have each pair of switches connected to a behind panel mounted AF type blade fuse holder. Supplied as standard with two position, on/off switches and 113694, 28 piece label set. Three position switches, momentary switches and label set 113695 (below) are also available. Suitable for 12 or 24 volt systems. Switches rated to 16 amp. Overall width 63mm. Cut out width 42mm. Intrusion 25mm. Mount screws 3mm roundhead.
Features:
BLA Code: 113782
Facia Colour: White
Gang: 6
Fuses: Yes
Overall Length mm: 167
Cut Out Length mm: 132SKU: 113782 -
Electrical, Switches
Marinco® BEP Contour Heavy Duty Battery Master Switch (113551)
Marinco® BEP Contour Heavy Duty Battery Master Switch (113551)
The 720 heavy duty Contour Master Switch is designed for larger vessels with higher amp loads. It
offers 600 amps continuous and 2500 amps cranking capacity. The switch can be recess mounted in a
85mm hole or surface mounted. Screw holes 5mm roundhead. Interchangeable labelling system on the
control knob allows a full range of applications. Switches come standard with the battery symbol label.
Alternative label sets 113690 and 113691 are available. Removable rear cover insulates the rear
terminals against any short circuits and ensures the switch meets ABYC requirements. Non corrosive
construction, self cleaning sliding contacts. Ignition protected.Features:
BLA Code: 113551
Continuous rating: 600 amps DC
Intermittent rating: 800 amps DC
Cranking rating: 2500 amps DC for 10 seconds
Voltage rating: 48 volts DC maximum
Terminal stud size: 2 x 12mmSKU: 113551 -
Electrical, Switches
Marinco® BEP Contour Interior Switches (113310)
Marinco® BEP Contour Interior Switches (113310)
Replicating the same lines as the Contour Switch Panels and Meters, these interior switches compliment the décor of modern boat interiors. The Contour switch can be either, surface or recessed, vertical or horizontal mounted. The switches have a backlit label with systems on indicator. Supplied with 10 piece, symbol label set. Dimensions 60(l) x 30(w) x 18(h) mm (single), 90(l) x 30(w) x 18(h) mm (double). Switch current rating 10amp, 12VDC.
Features:
BLA Code: 113310
Colour: Black
Style: Single
Switch: On/offSKU: 113310 -
Electrical, Switches
Marinco® BEP Contour Interior Switches (113319)
Marinco® BEP Contour Interior Switches (113319)
Replicating the same lines as the Contour Switch Panels and Meters, these interior switches compliment the décor of modern boat interiors. The Contour switch can be either, surface or recessed, vertical or horizontal mounted. The switches have a backlit label with systems on indicator. Supplied with 10 piece, symbol label set. Dimensions 60(l) x 30(w) x 18(h) mm (single), 90(l) x 30(w) x 18(h) mm (double). Switch current rating 10amp, 12VDC.
Features:
BLA Code: 113319
Colour: Black
Style: Double
Switch: On/offSKU: 113319 -
12V Accessories, Electrical
Marinco® BEP Contour Matrix Fume Detector (113125)
Marinco® BEP Contour Matrix Fume Detector (113125)
- 250mA max current draw
- 20% LEL (lower explosive limit) alarm sensitivity
Features:
BLA Code: 113125
Face mm: 88×66
Depth Overall mm: 27
Mount Screws mm: 4 r/h
Power volts: 10-35SKU: 113125 -
12V Accessories, Electrical
Marinco® BEP Contour Matrix Gas Detectors (113121)
Marinco® BEP Contour Matrix Gas Detectors (113121)
- 350mA current draw with two sensors
- 20% lower explosive limit sensitivity
- 800mA max power output
- 700mA pulse, 250mA hold solenoid output
- 88 x 66mm base, 27mm overall depth, 4mm roundhead mount screws
Features:
BLA Code: 113121
Detector: With one sensor
Power volts: 10-35N.B. Gas sensor to be kept dry at all times.
Do not install in environments approaching more than 100% humidity.SKU: 113121 -
12V Accessories, Electrical
Marinco® BEP Contour Matrix Gas Detectors (113122)
Marinco® BEP Contour Matrix Gas Detectors (113122)
- 350mA current draw with two sensors
- 20% lower explosive limit sensitivity
- 800mA max power output
- 700mA pulse, 250mA hold solenoid output
- 88 x 66mm base, 27mm overall depth, 4mm roundhead mount screws
Features:
BLA Code: 113122
Detector: With one sensor and LPG shut off
Power volts: 10-32N.B. Gas sensor to be kept dry at all times.
Do not install in environments approaching more than 100% humidity.SKU: 113122 -
Electrical, Switches
Marinco® BEP Digital Voltage Sensing Relay (113668)
Marinco® BEP Digital Voltage Sensing Relay (113668)
- Safely charge two or more independent battery banks from one charge source (alternator, battery charger)
- Charges engine starting batteries before combining auxiliary bank for charging
- Protects start batteries from becoming flattened by domestic loads
- Isolates electronics from harmful electrical surges from starter motors
- Simple to install 3 wire connection, leaves alternator wiring intact
- No volt drop vs. diode isolators
- Ignition protected
- Surface or panel mountable
- Replaces previous models 113646, 113647 and 113649
Features:
BLA Code: 113668
LxWxH mm: 69x69x50
Volts V: 12/24
Rating (A) Continuous: 125
Rating (A) Intermittent: 140
Engages V DC: 13.4/26.8
Disengages V DC: 12.8/25.6SKU: 113668 -
Electrical, Switches
Marinco® BEP Easyfit Battery Master Switch (113547)
Marinco® BEP Easyfit Battery Master Switch (113547)
Through panel mount battery master switch with removable threaded ring allows for fast installation in panel thicknesses up to 19mm. Control knob cannot be removed whilst in the on or off position, but is removable at an anti-theft position at 45º past the off position. Removable back cover protects terminals and meets ABYC specifications. The switch can also be surface mounted. Ignition protected.
Features:
BLA Code: 113547
Continuous rating: 275 amp DC
Intermittent rating: 455 amp DC
Cranking rating: 1250 amp DC (10 seconds)
Voltage rating: 48 volts DC maximum
Moulded in high temperature, fibre-reinforced plasticsSKU: 113547 -
12V Accessories, Electrical
Marinco® BEP Heavy Duty Busbar (113503)
Marinco® BEP Heavy Duty Busbar (113503)
Tin plated brass busbar with insulated mounting base and four heavy duty studs. Meets ABYC standards.
Features:
BLA Code: 113503
Take Offs: 4
Length mm: 120
Height mm: 25
Current Rating: 150
Voltage Rating: 48V DC maxSKU: 113503 -
Electrical, Switches
Marinco® BEP Heavy Duty Four Position Battery Switch (113556)
Marinco® BEP Heavy Duty Four Position Battery Switch (113556)
The 721 heavy duty selector switch provides four possible operation settings, Off, Battery 1, Both and Battery 2 giving the choice of charging a selected battery or isolating current draw to a single battery.
The switch can be recess mounted in a 85mm hole or surface mounted. Screw holes 5mm roundhead.
Removable rear cover insulates the rear terminals against short circuit and removable side plates provide access for heavy duty battery cables. Please note this system will not protect electronics from
harmful engine starting spikes.Features:
BLA Code: 113556
Continuous rating: 350 amps DC between common and B1 or B2 500 amps DC between common and B1 and B2|
Intermittent rating: 500 amps DC
Cranking rating: 1500 amps DC for 10 seconds
Voltage rating: 48 volts DC maximum
Terminal stud size: 3 x 10mmSKU: 113556 -
12V Accessories, Electrical
Marinco® BEP Insulated Dual Power Studs (113520)
Marinco® BEP Insulated Dual Power Studs (113520)
High temperature moulded plastic base with tinned copper studs in 8 to 10mm and tinned brass in 6mm version. Commonly used for isolated positive and negative connections. A version with 10mm stud for the positive cable and 8mm stud for the negative is also available. Push fit covers, colour coded for polarity are available.
Features:
BLA Code: 113520
Stud Size mm: 6
Base Size mm: 48×43
Height mm: 38SKU: 113520 -
12V Accessories, Electrical
Marinco® BEP Insulated Dual Power Studs (113521)
Marinco® BEP Insulated Dual Power Studs (113521)
High temperature moulded plastic base with tinned copper studs in 8 to 10mm and tinned brass in 6mm version. Commonly used for isolated positive and negative connections. A version with 10mm stud for the positive cable and 8mm stud for the negative is also available. Push fit covers, colour coded for polarity are available.
Features:
BLA Code: 113521
Stud Size mm: 10/8
Base Size mm: 48×43
Height mm: 38SKU: 113521 -
12V Accessories, Electrical
Marinco® BEP Insulated Dual Power Studs (113522)
Marinco® BEP Insulated Dual Power Studs (113522)
High temperature moulded plastic base with tinned copper studs in 8 to 10mm and tinned brass in 6mm version. Commonly used for isolated positive and negative connections. A version with 10mm stud for the positive cable and 8mm stud for the negative is also available. Push fit covers, colour coded for polarity are available.
Features:
BLA Code: 113522
Stud Size mm: 10
Base Size mm: 48×43
Height mm: 38SKU: 113522 -
12V Accessories, Electrical
Marinco® BEP Insulated Dual Power Studs with Covers – Packaged (113489)
12V Accessories, ElectricalMarinco® BEP Insulated Dual Power Studs with Covers – Packaged (113489)
Marinco® BEP Insulated Dual Power Studs with Covers – Packaged (113489)
High temperature moulded plastic base with tinned copper studs in 8 to 10mm and tinned brass in 6mm version. Commonly used for isolated positive and negative connections. A version with 10mm stud for the positive cable and 8mm stud for the negative is also available. Push fit colour coded covers for polarity are included.
Features:
BLA Code: 113489
Description: Stud dual 6mm with black cover
Includes: 1 x 113520 + 1 x 113529SKU: 113489 -
12V Accessories, Electrical
Marinco® BEP Insulated Dual Power Studs with Covers – Packaged (113499)
12V Accessories, ElectricalMarinco® BEP Insulated Dual Power Studs with Covers – Packaged (113499)
Marinco® BEP Insulated Dual Power Studs with Covers – Packaged (113499)
High temperature moulded plastic base with tinned copper studs in 8 to 10mm and tinned brass in 6mm version. Commonly used for isolated positive and negative connections. A version with 10mm stud for the positive cable and 8mm stud for the negative is also available. Push fit colour coded covers for polarity are included.
Features:
BLA Code: 113499
Description: Stud dual 10/8mm with red/black cover
Includes: 1 x 113521 + 1 x 113523 + 1 x 113525SKU: 113499 -
12V Accessories, Electrical
Marinco® BEP Insulated Power Stud (113448)
Marinco® BEP Insulated Power Stud (113448)
High temperature moulded plastic base, colour coded for polarity. Studs are tinned copper in 10mm and tinned brass in 6mm versions. Push fit covers are available to protect exposed lugs, conforming to ABYC standards.
Features:
BLA Code: 113448
Stud Size mm: 8
Base Colour: Red
Base Size mm: 44×18
Height mm: 36SKU: 113448 -
12V Accessories, Electrical
Marinco® BEP Insulated Power Stud (113449)
Marinco® BEP Insulated Power Stud (113449)
High temperature moulded plastic base, colour coded for polarity. Studs are tinned copper in 10mm and tinned brass in 6mm versions. Push fit covers are available to protect exposed lugs, conforming to ABYC standards.
Features:
BLA Code: 113449
Stud Size mm: 8
Base Colour: Black
Base Size mm: 44×18
Height mm: 36SKU: 113449 -
12V Accessories, Electrical
Marinco® BEP Insulated Power Stud (113515)
Marinco® BEP Insulated Power Stud (113515)
High temperature moulded plastic base, colour coded for polarity. Studs are tinned copper in 10mm and tinned brass in 6mm versions. Push fit covers are available to protect exposed lugs, conforming to ABYC standards.
Features:
BLA Code: 113515
Stud Size mm: 6
Base Colour: Red
Base Size mm: 44×18
Height mm: 36SKU: 113515 -
12V Accessories, Electrical
Marinco® BEP Insulated Power Stud (113517)
Marinco® BEP Insulated Power Stud (113517)
High temperature moulded plastic base, colour coded for polarity. Studs are tinned copper in 10mm and tinned brass in 6mm versions. Push fit covers are available to protect exposed lugs, conforming to ABYC standards.
Features:
BLA Code: 113517
Stud Size mm: 6
Base Colour: Black
Base Size mm: 44×18
Height mm: 36SKU: 113517 -
12V Accessories, Electrical
Marinco® BEP Insulated Power Stud (113518)
Marinco® BEP Insulated Power Stud (113518)
High temperature moulded plastic base, colour coded for polarity. Studs are tinned copper in 10mm and tinned brass in 6mm versions. Push fit covers are available to protect exposed lugs, conforming to ABYC standards.
Features:
BLA Code: 113518
Stud Size mm: 10
Base Colour: Red
Base Size mm: 44×18
Height mm: 36SKU: 113518 -
12V Accessories, Electrical
Marinco® BEP Insulated Power Stud (113519)
Marinco® BEP Insulated Power Stud (113519)
High temperature moulded plastic base, colour coded for polarity. Studs are tinned copper in 10mm and tinned brass in 6mm versions. Push fit covers are available to protect exposed lugs, conforming to ABYC standards.
Features:
BLA Code: 113519
Stud Size mm: 10
Base Colour: Black
Base Size mm: 44×18
Height mm: 36SKU: 113519 -
12V Accessories, Electrical
Marinco® BEP Insulated Power Studs with Covers – Packaged (113439)
Marinco® BEP Insulated Power Studs with Covers – Packaged (113439)
High temperature moulded plastic base, colour coded for polarity studs are tinned copper in 10mm and tinned brass in 6mm versions. Push fit colour coded covers are included to protect exposed lugs, conforming to ABYC standards.
Features:
BLA Code: 113439
Description: Stud single 8mm with red cover
Includes: 1 x 113448 + 1 x 113523SKU: 113439 -
12V Accessories, Electrical
Marinco® BEP Insulated Power Studs with Covers – Packaged (113441)
Marinco® BEP Insulated Power Studs with Covers – Packaged (113441)
High temperature moulded plastic base, colour coded for polarity studs are tinned copper in 10mm and tinned brass in 6mm versions. Push fit colour coded covers are included to protect exposed lugs, conforming to ABYC standards.
Features:
BLA Code: 113441
Description: Stud single 8mm with black cover
Includes: 1 x 113449 + 1 x 113525SKU: 113441 -
12V Accessories, Electrical
Marinco® BEP Insulated Power Studs with Covers – Packaged (113477)
Marinco® BEP Insulated Power Studs with Covers – Packaged (113477)
High temperature moulded plastic base, colour coded for polarity studs are tinned copper in 10mm and tinned brass in 6mm versions. Push fit colour coded covers are included to protect exposed lugs, conforming to ABYC standards.
Features:
BLA Code: 113477
Description: Stud single 6mm with red cover
Includes: 1 x 113515 + 1 x 113523SKU: 113477 -
12V Accessories, Electrical
Marinco® BEP Insulated Power Studs with Covers – Packaged (113478)
Marinco® BEP Insulated Power Studs with Covers – Packaged (113478)
High temperature moulded plastic base, colour coded for polarity studs are tinned copper in 10mm and tinned brass in 6mm versions. Push fit colour coded covers are included to protect exposed lugs, conforming to ABYC standards.
Features:
BLA Code: 113478
Description: Stud single 6mm with black cover
Includes: 1 x 113517 + 1 x 113525SKU: 113478 -
12V Accessories, Electrical
Marinco® BEP Insulated Power Studs with Covers – Packaged (113483)
Marinco® BEP Insulated Power Studs with Covers – Packaged (113483)
High temperature moulded plastic base, colour coded for polarity studs are tinned copper in 10mm and tinned brass in 6mm versions.Push fit colour coded covers are included to protect exposed lugs,conforming to ABYC standards.
Features:
BLA Code: 113483
Description: Stud single 10mm with black cover
Includes: 1 x 113519 + 1 x 113525SKU: 113483 -
12V Accessories, Electrical
Marinco® BEP Intelligent Wiper Switch (116178)
Marinco® BEP Intelligent Wiper Switch (116178)
The new AFI microcontroller based intelligent switch operates all necessary wiper motor functions at the touch of a button. Settings for two continuous speed functions and three intermittent speed functions (2, 4 and 8 second delays) and washer system function. Blinking LED function lights. Suitable for both 12 and 24 volt motors. Connectors included.
Features:
BLA Code: 116178
SKU: 116178
