Use these adapter cables to link your GPSMAP® Series chartplotter to a compatible Fusion® stereo. These cables will connect a Garmin Marine Network port to an RJ45 port and are offered in male and female connector varieties to fit your specific system.
Garmin Accessories
Showing 61–90 of 147 results
-
Garmin, Garmin Accessories, Sanctuary Cove
Garmin GPS 24xd NMEA 2000 – White
Garmin GPS 24xd NMEA 2000 – EXPLORE COASTAL WATERS
The GPS 24xd position receiver and antenna gives you precise location with multi-band GNSS and heading accuracy even at slow speeds.
Navigate in more locations with expanded GNSS support.
Get high-sensitivity tracking with fast GPS update rate.
Accurately pinpoint your heading — regardless of speed.
It’s water-resistant (IPX7) to withstand the elements.
Install it easily with multiple mounting options.
The antenna is compatible with NMEA 2000® devices.
More accurate data — for more confident navigation.
MULTI-BAND GNSS
Multi-band GNSS provides precise location accuracy1 to within 1 metre to compatible marine multifunction displays, instrument displays and autopilots.
MAGNETIC HEADING
The magnetic heading sensor provides accuracy to within 3 degrees, stabilising charts, radar overlay and MARPA even at slow speeds.
HIGH-SENSITIVITY GPS
Fast 10 Hz position update rates provide high-sensitivity position, velocity and time data.
EXPANDED GNSS SUPPORT
GPS 24xd provides access to four key global navigation satellite systems (GPS, Galileo2, GLONASS and BeiDou2) to more accurately track in challenging conditions than GPS alone.
MULTI-SBAS COMPATIBLE
Multi-SBAS compatibility corrects signal measurement errors and provides information about the accuracy, integrity, continuity and availability of its signals.
MOUNTING OPTIONS
Installation is easy with under-deck, pole and surface-mount options.
11 < 1 metre CEP, < 3 metres 95%2Supported when available
What’s in the box?- GPS 24xd NMEA 2000®
- Pole mount
- Surface mount
- Under-deck mount
- NMEA 2000 backbone/drop cable (6 metres)
- NMEA 2000 T-connector
- Documentation
Installation Instructions
Setting Up A NMEA Network and Installing a Garmin GPS 24XD on a boat
SKU: 010-02316-10 -
Garmin, Garmin Accessories
Garmin GRF™ 10 – Rudder Feedback Sensor
Garmin GRF™ 10 – Rudder Feedback Sensor
Pair this sensor with the GHP™ 20 or GHP 12 to provide rudder position feedback and to detect and avoid rudder stops while sailing or boating.
The GRF 10 uses a magnetic sensor to relay position information, eliminating friction that causes other types of sensors to wear out. The arm of the GRF 10 is connected to the rudder of the boat and relays position information through the sensor to the mariner so they know where the rudder is – giving them an added peace of mind when starting from a stopped position, docking, launching or moving at slow speeds.
Additionally, the GRF 10, allows sailors to:
- Know where the rudder is positioned without having to look back
- Make smoother maneuvers and avoid over-compensating
- Save undue wear and stress on their autopilot system by eliminating force on the rudder when it’s already stopped left or right.
SKU: 010-11829-00 -
Garmin, Garmin Accessories
Garmin GRID 20 Remote Control
Garmin GRID 20 Remote Control – Sit Back and Take Control
- Provides intuitive, easy-to-use remote access and control of your entire Garmin marine system
- 360-degree, all-in-one joystick with a rotary knob and push-to-select button
- Enables easy chartplotter menu/setting navigation and fine control, even in the worst conditions
- 4 favorite keys can be designated to restore your system to a previously saved configuration
- Allows wired or wireless installation options
The easy-to-use GRID 20 remote input device provides intuitive remote access and control of your entire Garmin marine system. It features a 360-degree joystick with a rotary knob and push-to-select button for easy chartplotter menu/setting navigation and fine control, even in the worst conditions. You can designate 4 favourite keys to restore your system to a previously saved configuration. There are also a variety of hard keys for quick access to important functions, including left and right screen switches, autopilot standby/engage and more. For peace of mind, there’s also a dedicated SOS key. Wired or wireless installation and vertical or horizontal options allow for a plug-and-play solution that is tailored to your marine system. Its small footprint makes it convenient to integrate into a busy helm between displays — or even into the arm of the captain’s chair.
What’s in the box?
- GRID 20
- Mounting hardware
- Power cable
- Documentation
SKU: 010-02011-00, 010-02011-01 -
Garmin, Garmin Accessories
Garmin GRID™ Remote Control (Garmin Remote Input Device)
Garmin GRID™ Remote Control (Garmin Remote Input Device)
Our remote input device provides full control of all GPSMAP® 8000 Glass Helm series units. Rotary knob and joystick controls provide navigation through menus and screens and allows you to seamlessly navigate between monitors at a station – all while controlling single or multiple 8000-series monitors and multifunctional displays (MFDs) with 1 device. GRID can be integrated into a captain’s chair for a low-profile controlling solution.
What’s in the box?
- GRID (Garmin Remote Input Device)
- Mounting hardware
- Power cable
- Network cable (6 ft)
- Documentation
Installation Instructions
SKU: 010-01024-00 -
Garmin, Garmin Accessories
Garmin GST 10 – Water Speed and Temperature Analog Adapter Cable 16ft (4.9m)
Garmin, Garmin AccessoriesGarmin GST 10 – Water Speed and Temperature Analog Adapter Cable 16ft (4.9m)
Garmin GST 10 – Water Speed and Temperature Analog Adapter Cable 16ft (4.9m)
With the GST 10 Water Speed and Temperature Analog Adapter aboard your vessel, you can give new life to your old gauges by making the transition from analog to digital. This simple-to-install adapter takes the data generated by traditional analog gauges and converts the data into a NMEA 2000® (5 Hz) signal so you can create or expand your network without replacing all of the equipment on your boat.
Connect to Your Network
With the Garmin GST 10 adapter, you can convert analog information provided via the compatible water-speed sensor, water-temperature sensor, or combined water-speed and water-temperature sensor (not included) on your boat to your NMEA 2000 network. The GST 10 allows you to observe water-speed and water-temperature information on compatible Garmin display devices connected to your NMEA 2000 network.
Upgrade With Ease
The NMEA 2000 analog adapters from Garmin are easy to add to any existing marine network. Once installed, the data from the adapters can be viewed via the GMI™ 20 Marine Instrument Display and other compatible Garmin devices. This easy-to-use set-up will help you bring your older dashboard into the digital age.
Installation Instructions
SKU: 010-11328-00 -
Garmin, Garmin Accessories
Garmin HDMI Cable
Garmin HDMI Cable
Connect your compatible Garmin marine device to a HDMI device with this 15-foot cable. The water-resistant and secure connection supports full HD video and audio playback. Refer to your device owner’s manual for more information on supported A/V features.
SKU: 010-12390-20 -
Garmin, Garmin Accessories
Garmin Heavy Duty Stainless Steel Transducer Bracket with inbuilt Spray Shield (Part No. 010-12006-11)
Garmin, Garmin AccessoriesGarmin Heavy Duty Stainless Steel Transducer Bracket with inbuilt Spray Shield (Part No. 010-12006-11)
Garmin Heavy Duty Stainless Steel Transducer Bracket with inbuilt Spray Shield (Part No. 010-12006-11)
Easily attach the Heavy Duty Stainless Steel Spray bracket as a replacement for a broken bracket or an upgrade with a built in Spray Shield to deflect spray which flies off the face of transducer.
The Garmin spray shield feature is designed to reduce excess water spray from transducers when the vessel is running at high speeds. Can be retro fitted to a wide range of common Garmin transom mounted transducers. The Heavy Duty Bracket simply replaces the fitted between current bracket and includes the inbuilt spray shield.
Easily attach your compatible 4-, 8- or 12-pin transducer to the transom of your boat with this mount that provides excellent sonar returns at all speeds. Since the transducer is in the water at all times, the mount does not protect the transducer from underwater obstructions and some drag on the boat will occur. The included transducer spray shield reduces excessive water spray from your compatible transducer when your boat is running at high speeds.
You also can mount the transducer to the step of your boat with this mount to allow angle adjustment of the transducer so it is parallel with the water surface; this will create no drag on the boat. And since the transducer is out of the water with this mounting style, sonar will not track bottom when the boat is on plane.COMPATABLE UNITS & TRANSDUCERS:
* echoMAP™ 45dv
* echoMAP™ 55dv
* echoMAP™ 75dv
* echoMAP™ 75sv
* echoMAP™ 95sv
* echoMAP™ CHIRP 45dv
* echoMAP™ CHIRP 55dv
* echoMAP™ CHIRP 75dv
* echoMAP™ CHIRP 75sv
* echoMAP™ CHIRP 95sv
* Garmin GT20-TM – Transom Mount DownVü 500 W (CHIRP 455/800 kHz) Traditional 500 W (77/200 kHz) Transducer with Temp (8-pin)
* Garmin GT21-TM – Transom Mount DownVü 500 W (CHIRP 260/455 kHz) Traditional 600 W (50/200 kHz) Transducer with Temp (8-pin)
* Garmin GT30-TM – Transom Mount DownVü/SideVü 500 W (CHIRP 455/800 kHz) Scanning Transducer with Temp (12-pin)
* Garmin GT40-TM – Transom Mount DownVü/SideVü 500 W (CHIRP 455/800 kHz) Traditional 500 W (77/200 kHz) Transducer with Temp (12-pin)
* Garmin GT41-TM – Transom Mount DownVü/SideVü 500 W (CHIRP 260/455 kHz) Traditional 600 W (50/200 kHz) Transducer with Temp (12-pin)
* Garmin GT50M-TM – Transom Mount DownVü/SideVü 500 W (CHIRP 455/800 kHz) Traditional 300 W (Mid-band CHIRP 80-160 kHz) Transducer with Temp (12-pin)
* Garmin GT51M-TM – Transom Mount DownVü/SideVü 500 W (CHIRP 260/455 kHz) Traditional 600 W (Mid-band CHIRP 80-160 kHz) Transducer with Temp (12-Pin)
*Specifications from suppliers’ information.SKU: 010-12006-11 -
Garmin, Garmin Accessories
Garmin High Speed HDMI Cable
Garmin High Speed HDMI Cable
Use this 15-foot cable to connect your compatible Garmin marine product to an HDMI device. The water-resistant and secure connection supports 4K video and audio playback. Refer to your device owner’s manual for more information on supported A/V features.
SKU: 010-12390-22 -
Garmin, Garmin Accessories
Garmin inReach Mini Dive Case
Garmin inReach Mini Dive Case
Use this water-resistant case to bring your inReach Mini 2 satellite communicator on your dives and have peace-of-mind whenever you surface¹. Protects inReach Mini to a depth of 10 ATM (or 100 meters).
1GPS tracking and satellite communication does not work underwater.
SKU: 010-12723-01 -
Garmin, Garmin Accessories, Sanctuary Cove
Garmin J1939 Cable for GPSMAP 8400 / 8600
Garmin J1939 Cable for GPSMAP 8400 / 8600
Connect your GPSMAP 8400 or 8600 series chartplotter to a J1939 network to gain access to features, such as engine or generator monitoring. Like the NMEA 2000® network, the J1939 network follows a standard and uses proprietary messages.
SKU: 010-12390-30 -
Garmin, Garmin Accessories, Sanctuary Cove
Garmin LC102 LED Control Module
SET THE VIBE FOR YOUR RIDE
Control LED lights on your boat from your compatible chartplotter or smartphone with the Garmin Spectra light control module (lights not included). Assign and control different light groups for cup holders, speakers, strip or courtesy lights, and more to create your own vibe.
Seamless integrated lighting control system.
BE THE LIGHT DJ
From bow to stern and everything in between, this module lets you control and set up different light groups and scenes.
IN YOUR CONTROL
Control lights over the NMEA 2000® network with your compatible chartplotter or with the ActiveCaptain® App on your compatible smartphone.
MATCH THE BEAT
See the beat by syncing the LED lights to the music track with the audio sync feature.
FUSION® AND JL AUDIO COMPATIBLE
Control LED lighting on Fusion and JL Audio boat speakers and subwoofers plus wake tower speakers (sold separately).
GROW THE SYSTEM
Add more lights after the initial install with a scalable system.
RUGGED DESIGN
Built to withstand the abuse of life on the water (in accordance with IP66/IP67 ratings)
SKU: 010-02829-00 -
Garmin, Garmin Accessories
Garmin Marine Heading Sensor Cable to Connect to NMEA 2000 Network (Part No. 010-11419-00)
Garmin, Garmin AccessoriesGarmin Marine Heading Sensor Cable to Connect to NMEA 2000 Network (Part No. 010-11419-00)
Garmin Marine Heading Sensor Cable to Connect Marine Heading Sensor to NMEA 2000 Network [Garmin Part Number: 010-11419-00] – RRP $1290
Connect a heading sensor to a NMEA 2000 network with this 19.7 ft (6 m) cable.
THIS IS SUITABLE FOR CURRENT MODEL GARMIN GMR 18 xHD RADOME & GMR 24 xHD RADOME.
WHAT’S IN THE BOX:
* Garmin Marine Heading Sensor Cable – NMEA 2000
* DocumentationWARRANTY:
We are an authorised Australian Garmin retailer, as such Full Australian Manufacturers Warranty is applicable for this item. Please note if a Garmin unit is purchased overseas or from a non-authorised Garmin retailer you may not receive warranty coverage in Australia.*Specifications from suppliers’ information.
SKU: 010-11419-00 -
Garmin, Garmin Accessories, Garmin Radars, Radars
Garmin Marine Heading Sensor for Radar (Part No. 010-11417-00)
Garmin, Garmin Accessories, Garmin Radars, RadarsGarmin Marine Heading Sensor for Radar (Part No. 010-11417-00)
Garmin Marine Heading Sensor for Radar [Garmin Part Number: 010-11417-00] – RRP $1200
When interfacing this 3-axis compass heading sensor to our marine lineup of MFDs and radars, mariners can expect unparalleled radar overlay performance and accuracy along with excellent MARPA capabilities.
This heading sensor (based on Airmar H2183) uses a rate gyro, so it can maintain an exceptional 2 degree heading accuracy under heavy dynamic conditions, with up to 30 degrees of pitch and roll. In addition, it supports either NMEA 0183 or NMEA 2000® data output to fit any installation.
Installation is a snap thanks to the heading sensor’s innovative design, allowing it to mount to any angled bulkhead. Mariners can expect this heading sensor to provide trouble-free service in the harshest conditions and will learn to appreciate its reliability and excellent performance.
* Note: NMEA 0183 and NMEA 2000 cables sold separately (to connect to a NMEA 2000 Network a dedicated NMEA 2000 Marine Heading Sensor Cable is required Garmin Part Number: 010-11419-00 – optional, please see related products).
THIS IS SUITABLE FOR CURRENT MODEL GARMIN GMR 18 xHD RADOME & GMR 24 xHD RADOME.
FEATURES:
* Better than 1 degree static heading accuracy
* Industry leading 2 degree dynamic accuracy up to 30 degree pitch and roll
* Three-axis solid-state compass provides accurate heading data
* Three-axis accelerometer improves heading, pitch and roll in static conditions
* Three-axis rate gyro improves heading, pitch and roll in dynamic conditions
* Temperature compensated across the entire operating range to ensure optimum accuracy
* Easy installation to any angled bulkhead
* Auto-calibration featureSPECIFICATIONS:
* Dimensions (HxLxD): 2″ (5.08 cm) x 4.4″ (11.18 cm) x 4.5″ (11.43 cm)
* Default heading output: 10 Hz for both NMEA 0183 and NMEA 2000 (NMEA 2000 can be output up to 20 Hz)
* Waterproof housing: IPX6
* Operating voltage: 9 VDC to 16 VDCWHAT’S IN THE BOX:
* Garmin Marine Heading Sensor
* DocumentationWARRANTY:
We are an authorised Australian Garmin retailer, as such Full Australian Manufacturers Warranty is applicable for this item. Please note if a Garmin unit is purchased overseas or from a non-authorised Garmin retailer you may not receive warranty coverage in Australia.*Specifications from suppliers’ information.
SKU: 010-11417-00 -
Garmin, Garmin Accessories
Garmin Marine Network Adapter Cable – Small (female, right angle) to Large (female)
Garmin, Garmin AccessoriesGarmin Marine Network Adapter Cable – Small (female, right angle) to Large (female)
Garmin Marine Network Adapter Cable – Small (female, right angle) to Large (female)
Adapt the small network connector on your Garmin device to large connector Garmin Marine Network cables.
SKU: 010-13094-00 -
-
-
-
Garmin, Garmin Accessories
Garmin Marine Network Cables (Small Connectors) – 50ft (15.24m) Right Angle
Garmin, Garmin AccessoriesGarmin Marine Network Cables (Small Connectors) – 50ft (15.24m) Right Angle
Garmin Marine Network Cables (Small Connectors) – 50ft (15.24m) Right Angle
Our small-connector marine network cables offer additional cable lengths to help with install. Various sizes sold separately.
SKU: 010-12528-10 -
-
Garmin, Garmin Accessories
Garmin Marine Network PoE Isolation Coupler
Garmin Marine Network PoE Isolation Coupler
Connect a thermal camera, underwater lighting or boat stabilizing system to a compatible GPSMAP® series Garmin chartplotter with this PoE (Power over Ethernet) isolation coupler. The coupler provides connectivity to the Garmin Marine Network; without it the network will not function correctly and could possibly damage your Garmin unit and/or PoE device.
SKU: 010-10580-10 -
Garmin, Garmin Accessories
Garmin Marine Network to Fusion Cable – Large Male to RJ45, 6ft
Garmin Marine Network to Fusion Cable – Large Male to RJ45, 6ft
Use these adapter cables to link your GPSMAP® Series chartplotter to a compatible Fusion® stereo. These cables will connect a Garmin Marine Network port to an RJ45 port and are offered in male and female connector varieties to fit your specific system.
SKU: 010-12531-20 -
-
Garmin, Garmin Accessories, Sanctuary Cove
Garmin MSC 10 Marine Satellite Compass – Black
Garmin MSC 10 Marine Satellite Compass – KNOW EXACTLY WHERE YOU’RE HEADED
Get reliable, accurate heading information with the easy-to-install GPS-based MSC™ 10 Marine Satellite Compass.
Accuracy comes easy when you’ve got a multi-band GNSS receiver on board.
Faster updates. More detailed tracking.
Rough waters got you worried? MSC 10 delivers pitch, roll and heave info, too.
If other onboard systems need a heading sensor, we’ve got you covered.
SKU: 010-02407-10
