Electrical
Showing 121–150 of 396 results
-
12V Accessories, Electrical
Marinco® BEP Deluxe Curved Wiper Blade (116124)
Marinco® BEP Deluxe Curved Wiper Blade (116124)
All AFI Deluxe wiper blade frames are constructed using stainless steel materials. High quality silicone rubber compounds provide maximum durability and smooth wiping motion. Work efficiently on both curved and flat windshields. Suits all BLA range wiper arms.
Features:
BLA Code: 116124
Description: 405mm stainless steel curved wiper bladeSKU: 116124 -
12V Accessories, Electrical
Marinco® BEP Deluxe Curved Wiper Blade (116126)
Marinco® BEP Deluxe Curved Wiper Blade (116126)
All AFI Deluxe wiper blade frames are constructed using stainless steel materials. High quality silicone rubber compounds provide maximum durability and smooth wiping motion. Work efficiently on both curved and flat windshields. Suits all BLA range wiper arms.
Features:
BLA Code: 116126
Description: 460mm stainless steel curved wiper bladeSKU: 116126 -
Electrical, Switches
Marinco® BEP Digital Voltage Sensing Relay (113668)
Marinco® BEP Digital Voltage Sensing Relay (113668)
- Safely charge two or more independent battery banks from one charge source (alternator, battery charger)
- Charges engine starting batteries before combining auxiliary bank for charging
- Protects start batteries from becoming flattened by domestic loads
- Isolates electronics from harmful electrical surges from starter motors
- Simple to install 3 wire connection, leaves alternator wiring intact
- No volt drop vs. diode isolators
- Ignition protected
- Surface or panel mountable
- Replaces previous models 113646, 113647 and 113649
Features:
BLA Code: 113668
LxWxH mm: 69x69x50
Volts V: 12/24
Rating (A) Continuous: 125
Rating (A) Intermittent: 140
Engages V DC: 13.4/26.8
Disengages V DC: 12.8/25.6SKU: 113668 -
Electrical, Switches
Marinco® BEP Easyfit Battery Master Switch (113547)
Marinco® BEP Easyfit Battery Master Switch (113547)
Through panel mount battery master switch with removable threaded ring allows for fast installation in panel thicknesses up to 19mm. Control knob cannot be removed whilst in the on or off position, but is removable at an anti-theft position at 45º past the off position. Removable back cover protects terminals and meets ABYC specifications. The switch can also be surface mounted. Ignition protected.
Features:
BLA Code: 113547
Continuous rating: 275 amp DC
Intermittent rating: 455 amp DC
Cranking rating: 1250 amp DC (10 seconds)
Voltage rating: 48 volts DC maximum
Moulded in high temperature, fibre-reinforced plasticsSKU: 113547 -
Electrical, Switches
Marinco® BEP Heavy Duty Four Position Battery Switch (113556)
Marinco® BEP Heavy Duty Four Position Battery Switch (113556)
The 721 heavy duty selector switch provides four possible operation settings, Off, Battery 1, Both and Battery 2 giving the choice of charging a selected battery or isolating current draw to a single battery.
The switch can be recess mounted in a 85mm hole or surface mounted. Screw holes 5mm roundhead.
Removable rear cover insulates the rear terminals against short circuit and removable side plates provide access for heavy duty battery cables. Please note this system will not protect electronics from
harmful engine starting spikes.Features:
BLA Code: 113556
Continuous rating: 350 amps DC between common and B1 or B2 500 amps DC between common and B1 and B2|
Intermittent rating: 500 amps DC
Cranking rating: 1500 amps DC for 10 seconds
Voltage rating: 48 volts DC maximum
Terminal stud size: 3 x 10mmSKU: 113556 -
12V Accessories, Electrical
Marinco® BEP Insulated Dual Power Studs (113520)
Marinco® BEP Insulated Dual Power Studs (113520)
High temperature moulded plastic base with tinned copper studs in 8 to 10mm and tinned brass in 6mm version. Commonly used for isolated positive and negative connections. A version with 10mm stud for the positive cable and 8mm stud for the negative is also available. Push fit covers, colour coded for polarity are available.
Features:
BLA Code: 113520
Stud Size mm: 6
Base Size mm: 48×43
Height mm: 38SKU: 113520 -
12V Accessories, Electrical
Marinco® BEP Insulated Dual Power Studs (113521)
Marinco® BEP Insulated Dual Power Studs (113521)
High temperature moulded plastic base with tinned copper studs in 8 to 10mm and tinned brass in 6mm version. Commonly used for isolated positive and negative connections. A version with 10mm stud for the positive cable and 8mm stud for the negative is also available. Push fit covers, colour coded for polarity are available.
Features:
BLA Code: 113521
Stud Size mm: 10/8
Base Size mm: 48×43
Height mm: 38SKU: 113521 -
12V Accessories, Electrical
Marinco® BEP Insulated Dual Power Studs (113522)
Marinco® BEP Insulated Dual Power Studs (113522)
High temperature moulded plastic base with tinned copper studs in 8 to 10mm and tinned brass in 6mm version. Commonly used for isolated positive and negative connections. A version with 10mm stud for the positive cable and 8mm stud for the negative is also available. Push fit covers, colour coded for polarity are available.
Features:
BLA Code: 113522
Stud Size mm: 10
Base Size mm: 48×43
Height mm: 38SKU: 113522 -
12V Accessories, Electrical
Marinco® BEP Insulated Dual Power Studs with Covers – Packaged (113489)
Marinco® BEP Insulated Dual Power Studs with Covers – Packaged (113489)
High temperature moulded plastic base with tinned copper studs in 8 to 10mm and tinned brass in 6mm version. Commonly used for isolated positive and negative connections. A version with 10mm stud for the positive cable and 8mm stud for the negative is also available. Push fit colour coded covers for polarity are included.
Features:
BLA Code: 113489
Description: Stud dual 6mm with black cover
Includes: 1 x 113520 + 1 x 113529SKU: 113489 -
12V Accessories, Electrical
Marinco® BEP Insulated Dual Power Studs with Covers – Packaged (113497)
Marinco® BEP Insulated Dual Power Studs with Covers – Packaged (113497)
High temperature moulded plastic base with tinned copper studs in 8 to 10mm and tinned brass in 6mm version. Commonly used for isolated positive and negative connections. A version with 10mm stud for the positive cable and 8mm stud for the negative is also available. Push fit colour coded covers for polarity are included.
Features:
BLA Code: 113497
Description: Stud dual 10mm with red/black cover
Includes: 1 x 113522 + 1 x 113523 + 1 x 113525SKU: 113497 -
12V Accessories, Electrical
Marinco® BEP Insulated Dual Power Studs with Covers – Packaged (113499)
Marinco® BEP Insulated Dual Power Studs with Covers – Packaged (113499)
High temperature moulded plastic base with tinned copper studs in 8 to 10mm and tinned brass in 6mm version. Commonly used for isolated positive and negative connections. A version with 10mm stud for the positive cable and 8mm stud for the negative is also available. Push fit colour coded covers for polarity are included.
Features:
BLA Code: 113499
Description: Stud dual 10/8mm with red/black cover
Includes: 1 x 113521 + 1 x 113523 + 1 x 113525SKU: 113499 -
12V Accessories, Electrical
Marinco® BEP Insulated Power Stud (113448)
Marinco® BEP Insulated Power Stud (113448)
High temperature moulded plastic base, colour coded for polarity. Studs are tinned copper in 10mm and tinned brass in 6mm versions. Push fit covers are available to protect exposed lugs, conforming to ABYC standards.
Features:
BLA Code: 113448
Stud Size mm: 8
Base Colour: Red
Base Size mm: 44×18
Height mm: 36SKU: 113448 -
12V Accessories, Electrical
Marinco® BEP Insulated Power Stud (113449)
Marinco® BEP Insulated Power Stud (113449)
High temperature moulded plastic base, colour coded for polarity. Studs are tinned copper in 10mm and tinned brass in 6mm versions. Push fit covers are available to protect exposed lugs, conforming to ABYC standards.
Features:
BLA Code: 113449
Stud Size mm: 8
Base Colour: Black
Base Size mm: 44×18
Height mm: 36SKU: 113449 -
12V Accessories, Electrical
Marinco® BEP Insulated Power Stud (113515)
Marinco® BEP Insulated Power Stud (113515)
High temperature moulded plastic base, colour coded for polarity. Studs are tinned copper in 10mm and tinned brass in 6mm versions. Push fit covers are available to protect exposed lugs, conforming to ABYC standards.
Features:
BLA Code: 113515
Stud Size mm: 6
Base Colour: Red
Base Size mm: 44×18
Height mm: 36SKU: 113515 -
12V Accessories, Electrical
Marinco® BEP Insulated Power Stud (113517)
Marinco® BEP Insulated Power Stud (113517)
High temperature moulded plastic base, colour coded for polarity. Studs are tinned copper in 10mm and tinned brass in 6mm versions. Push fit covers are available to protect exposed lugs, conforming to ABYC standards.
Features:
BLA Code: 113517
Stud Size mm: 6
Base Colour: Black
Base Size mm: 44×18
Height mm: 36SKU: 113517 -
12V Accessories, Electrical
Marinco® BEP Insulated Power Stud (113518)
Marinco® BEP Insulated Power Stud (113518)
High temperature moulded plastic base, colour coded for polarity. Studs are tinned copper in 10mm and tinned brass in 6mm versions. Push fit covers are available to protect exposed lugs, conforming to ABYC standards.
Features:
BLA Code: 113518
Stud Size mm: 10
Base Colour: Red
Base Size mm: 44×18
Height mm: 36SKU: 113518 -
12V Accessories, Electrical
Marinco® BEP Insulated Power Stud (113519)
Marinco® BEP Insulated Power Stud (113519)
High temperature moulded plastic base, colour coded for polarity. Studs are tinned copper in 10mm and tinned brass in 6mm versions. Push fit covers are available to protect exposed lugs, conforming to ABYC standards.
Features:
BLA Code: 113519
Stud Size mm: 10
Base Colour: Black
Base Size mm: 44×18
Height mm: 36SKU: 113519 -
12V Accessories, Electrical
Marinco® BEP Insulated Power Studs with Covers – Packaged (113439)
Marinco® BEP Insulated Power Studs with Covers – Packaged (113439)
High temperature moulded plastic base, colour coded for polarity studs are tinned copper in 10mm and tinned brass in 6mm versions. Push fit colour coded covers are included to protect exposed lugs, conforming to ABYC standards.
Features:
BLA Code: 113439
Description: Stud single 8mm with red cover
Includes: 1 x 113448 + 1 x 113523SKU: 113439 -
12V Accessories, Electrical
Marinco® BEP Insulated Power Studs with Covers – Packaged (113441)
Marinco® BEP Insulated Power Studs with Covers – Packaged (113441)
High temperature moulded plastic base, colour coded for polarity studs are tinned copper in 10mm and tinned brass in 6mm versions. Push fit colour coded covers are included to protect exposed lugs, conforming to ABYC standards.
Features:
BLA Code: 113441
Description: Stud single 8mm with black cover
Includes: 1 x 113449 + 1 x 113525SKU: 113441 -
12V Accessories, Electrical
Marinco® BEP Insulated Power Studs with Covers – Packaged (113477)
Marinco® BEP Insulated Power Studs with Covers – Packaged (113477)
High temperature moulded plastic base, colour coded for polarity studs are tinned copper in 10mm and tinned brass in 6mm versions. Push fit colour coded covers are included to protect exposed lugs, conforming to ABYC standards.
Features:
BLA Code: 113477
Description: Stud single 6mm with red cover
Includes: 1 x 113515 + 1 x 113523SKU: 113477 -
12V Accessories, Electrical
Marinco® BEP Insulated Power Studs with Covers – Packaged (113478)
Marinco® BEP Insulated Power Studs with Covers – Packaged (113478)
High temperature moulded plastic base, colour coded for polarity studs are tinned copper in 10mm and tinned brass in 6mm versions. Push fit colour coded covers are included to protect exposed lugs, conforming to ABYC standards.
Features:
BLA Code: 113478
Description: Stud single 6mm with black cover
Includes: 1 x 113517 + 1 x 113525SKU: 113478 -
12V Accessories, Electrical
Marinco® BEP Insulated Power Studs with Covers – Packaged (113481)
Marinco® BEP Insulated Power Studs with Covers – Packaged (113481)
High temperature moulded plastic base, colour coded for polarity studs are tinned copper in 10mm and tinned brass in 6mm versions.Push fit colour coded covers are included to protect exposed lugs,conforming to ABYC standards.
Features:
BLA Code: 113481
Description: Stud single 10mm with red cover
Includes: 1 x 113518 + 1 x 113523SKU: 113481 -
12V Accessories, Electrical
Marinco® BEP Insulated Power Studs with Covers – Packaged (113483)
Marinco® BEP Insulated Power Studs with Covers – Packaged (113483)
High temperature moulded plastic base, colour coded for polarity studs are tinned copper in 10mm and tinned brass in 6mm versions.Push fit colour coded covers are included to protect exposed lugs,conforming to ABYC standards.
Features:
BLA Code: 113483
Description: Stud single 10mm with black cover
Includes: 1 x 113519 + 1 x 113525SKU: 113483 -
12V Accessories, Electrical
Marinco® BEP Intelligent Wiper Switch (116178)
Marinco® BEP Intelligent Wiper Switch (116178)
The new AFI microcontroller based intelligent switch operates all necessary wiper motor functions at the touch of a button. Settings for two continuous speed functions and three intermittent speed functions (2, 4 and 8 second delays) and washer system function. Blinking LED function lights. Suitable for both 12 and 24 volt motors. Connectors included.
Features:
BLA Code: 116178
SKU: 116178 -
Electrical, Switches
Marinco® BEP Micro Modular Switch Panels (113280)
Marinco® BEP Micro Modular Switch Panels (113280)
The micro range of switches offer the unique ability to select the size and orientation of switch panels by adding the compact modules together horizontally or vertically. Injection moulded plastic panel with high quality toggle switches covered by a neoprene rubber boot combined with LED indicator lights, mix and matched to suit most applications. Contour design protects from accidental switching. Supplied with one label set as per table. Labels are round to suit installation vertically or horizontally. Suitable for 12 volt systems only. Switches rated to 20 amp. Labels are back lit with green LED, changing to red when system on. Face 58 x 86mm, cut out 48 x 60mm, intrusion 28mm.
Features:
BLA Code: 113280
Colour: Black
Labels: 113717
Description: 2 x On/off toggle switchSKU: 113280 -
Electrical, Switches
Marinco® BEP Micro Modular Switch Panels (113284)
Marinco® BEP Micro Modular Switch Panels (113284)
The micro range of switches offer the unique ability to select the size and orientation of switch panels by adding the compact modules together horizontally or vertically. Injection moulded plastic panel with high quality toggle switches covered by a neoprene rubber boot combined with LED indicator lights, mix and matched to suit most applications. Contour design protects from accidental switching. Supplied with one label set as per table. Labels are round to suit installation vertically or horizontally. Suitable for 12 volt systems only. Switches rated to 20 amp. Labels are back lit with green LED, changing to red when system on. Face 58 x 86mm, cut out 48 x 60mm, intrusion 28mm.
Features:
BLA Code: 113284
Colour: Black
Labels: 113718
Description: 1 x 2 way & 1 x 3 way momentary switchSKU: 113284 -
Electrical, Switches
Marinco® BEP Micro Modular Switch Panels (113288)
Marinco® BEP Micro Modular Switch Panels (113288)
The micro range of switches offer the unique ability to select the size and orientation of switch panels by adding the compact modules together horizontally or vertically. Injection moulded plastic panel with high quality toggle switches covered by a neoprene rubber boot combined with LED indicator lights, mix and matched to suit most applications. Contour design protects from accidental switching. Supplied with one label set as per table. Labels are round to suit installation vertically or horizontally. Suitable for 12 volt systems only. Switches rated to 20 amp. Labels are back lit with green LED, changing to red when system on. Face 58 x 86mm, cut out 48 x 60mm, intrusion 28mm.
Features:
BLA Code: 113288
Colour: Black
Labels: 113717
Description: 1 x 2 way & 1 x 3 way switchSKU: 113288 -
Electrical, Switches
Marinco® BEP Micro Modular Switch Panels (113292)
Marinco® BEP Micro Modular Switch Panels (113292)
The micro range of switches offer the unique ability to select the size and orientation of switch panels by adding the compact modules together horizontally or vertically. Injection moulded plastic panel with high quality toggle switches covered by a neoprene rubber boot combined with LED indicator lights, mix and matched to suit most applications. Contour design protects from accidental switching. Supplied with one label set as per table. Labels are round to suit installation vertically or horizontally. Suitable for 12 volt systems only. Switches rated to 20 amp. Labels are back lit with green LED, changing to red when system on. Face 58 x 86mm, cut out 48 x 60mm, intrusion 28mm.
Features:
BLA Code: 113292
Colour: Black
Labels: Fitted
Description: Bilge alarm – visual & audibleSKU: 113292 -
Electrical, Switches
Marinco® BEP Micro Modular Switch Panels (113296)
Marinco® BEP Micro Modular Switch Panels (113296)
The micro range of switches offer the unique ability to select the size and orientation of switch panels by adding the compact modules together horizontally or vertically. Injection moulded plastic panel with high quality toggle switches covered by a neoprene rubber boot combined with LED indicator lights, mix and matched to suit most applications. Contour design protects from accidental switching. Supplied with one label set as per table. Labels are round to suit installation vertically or horizontally. Suitable for 12 volt systems only. Switches rated to 20 amp. Labels are back lit with green LED, changing to red when system on. Face 58 x 86mm, cut out 48 x 60mm, intrusion 28mm.
Features:
BLA Code: 113296
Colour: Black
Labels: 113717
Description: 2 x LEDs showing systems in operationSKU: 113296