Electrical
Showing 91–120 of 396 results
-
12V Accessories, Electrical
Marinco® BEP Compact Hidden Electric Horn (116031)
Marinco® BEP Compact Hidden Electric Horn (116031)
Externally flush mounted, 12 volt concealed horn with white ABS plastic housing and grill. Stylish mylar lined grill makes the installation totally waterproof, whilst allowing maximum sound transfer (111dB at one metre). Maximum current draw 4 amps. Black grill available separately.
Features:
BLA Code: 116031
Face Size mm: 135×85
Cut Out Dia. mm: 70
Mount Screws mm: 4 r/h
Colour: BlackSKU: 116031 -
12V Accessories, Electrical
Marinco® BEP Compact Hidden Electric Horn (116032)
Marinco® BEP Compact Hidden Electric Horn (116032)
Externally flush mounted, 12 volt concealed horn with white ABS plastic housing and grill. Stylish mylar lined grill makes the installation totally waterproof, whilst allowing maximum sound transfer (111dB at one metre). Maximum current draw 4 amps. Black grill available separately.
Features:
BLA Code: 116032
Face Size mm: 135×85
Cut Out Dia. mm: 70
Mount Screws mm: 4 r/h
Colour: WhiteSKU: 116032 -
Electrical, Switches
Marinco® BEP Contour Battery Master Switch – Surface and Panel Mount (113548)
Marinco® BEP Contour Battery Master Switch – Surface and Panel Mount (113548)
The 701 Contour Battery Master Switch is a simple on/off switch which offers a number of unique features. The contour lock system allows it to be a stand alone unit or locked together with other switches. The 701 also features a control knob which cannot be removed whilst in the on or off position, however can be removed by switching to an anti-theft position. Interchangeable labelling system on the control knob allows a full range of applications. Switches come standard with the battery symbol label. Alternative label sets 113690 and 113691 are available. Removable rear cover insulates the rear terminals against any short circuits and ensures the switch meets ABYC requirements. Removable side plates on 4 sides provide access for heavy duty battery cables. Surface mount or recess mount in a 52mm hole. Screw holes 5mm roundhead. Ignition protected. Non-corrosive construction.
Features:
BLA Code: 113548
Mounting Type: Panel
Continuous rating: 275 amps DC
Intermittent rating: 455 amps DC
Cranking rating: 1250 amps DC for 10 seconds
Voltage rating: 48 volts DC maximum
Terminal stud size: 2 x 10mm
Moulded in high temperature, fibre-reinforced plasticsSKU: 113548 -
Electrical, Switches
Marinco® BEP Contour Battery Master Switch – Surface and Panel Mount (113550)
-6%Electrical, SwitchesMarinco® BEP Contour Battery Master Switch – Surface and Panel Mount (113550)
Marinco® BEP Contour Battery Master Switch – Surface and Panel Mount (113550)
The 701 Contour Battery Master Switch is a simple on/off switch which offers a number of unique features. The contour lock system allows it to be a stand alone unit or locked together with other switches. The 701 also features a control knob which cannot be removed whilst in the on or off position, however can be removed by switching to an anti-theft position. Interchangeable labelling system on the control knob allows a full range of applications. Switches come standard with the battery symbol label. Alternative label sets 113690 and 113691 are available. Removable rear cover insulates the rear terminals against any short circuits and ensures the switch meets ABYC requirements. Removable side plates on 4 sides provide access for heavy duty battery cables. Surface mount or recess mount in a 52mm hole. Screw holes 5mm roundhead. Ignition protected. Non-corrosive construction.
Features:
BLA Code: 113550
Mounting Type: Surface
Continuous rating: 275 amps DC
Intermittent rating: 455 amps DC
Cranking rating: 1250 amps DC for 10 seconds
Voltage rating: 48 volts DC maximum
Terminal stud size: 2 x 10mm
Moulded in high temperature, fibre-reinforced plasticsSKU: 113550 -
Electrical, Switches
Marinco® BEP Contour Exterior Switches (113302)
Marinco® BEP Contour Exterior Switches (113302)
Replicating the same lines as the Contour interior switches, these exterior switches complement the décor of modern boat exteriors. The contour switch can be surface, recessed, vertical or horizontal mounted. The switches have a backlit label with systems on indicator. On/off and on/off/on switches are three pin. Momentary switches are two pin and spring return to off position. Supplied with symbol label set. Suitable for horizontal or vertical mounting. Supplied with 10 piece, symbol label set. Dimensions 60(l) x 30(w) x 18(h) mm (single), 90(l) x 30(w) x 18(h) mm (double). Switch current rating: 10amp 12VDC.
Features:
BLA Code: 113302
Colour: Black
Style: Single
Switch: On/offSKU: 113302 -
Electrical, Switches
Marinco® BEP Contour Exterior Switches (113305)
Marinco® BEP Contour Exterior Switches (113305)
Replicating the same lines as the Contour interior switches, these exterior switches complement the décor of modern boat exteriors. The contour switch can be surface, recessed, vertical or horizontal mounted. The switches have a backlit label with systems on indicator. On/off and on/off/on switches are three pin. Momentary switches are two pin and spring return to off position. Supplied with symbol label set. Suitable for horizontal or vertical mounting. Supplied with 10 piece, symbol label set. Dimensions 60(l) x 30(w) x 18(h) mm (single), 90(l) x 30(w) x 18(h) mm (double). Switch current rating: 10amp 12VDC.
Features:
BLA Code: 113305
Colour: Black
Style: Double
Switch: On/offSKU: 113305 -
Electrical, Switches
Marinco® BEP Contour Generation 2 Splash Proof Switch Panels (113756)
Marinco® BEP Contour Generation 2 Splash Proof Switch Panels (113756)
Injection moulded plastic panel with modern contour styling. The switch tray features a rubber mounting gasket and integral cover seal. The cover includes a clear plastic membrane with rubber over-mould allowing the flexibility to operate the switches while providing a clear window for label backlighting. Red LED indicates systems on. Both grey and blue interchangeable contour wave strips are included and custom colours are available, subject to minimum quantities. Mounting screws are bidden beneath the cover. Panels can be mounted horizontally or vertically due to the unique label design. A joiner is available for multiple panel installations. Available in 2, 4 or 6 gang versions with a choice of grey or white facia and with or without fuses. Fused versions have each pair of switches connected to a behind panel mounted AF type blade fuse holder. Supplied as standard with two position, on/off switches and 113694, 28 piece label set. Three position switches, momentary switches and label set 113695 (below) are also available. Suitable for 12 or 24 volt systems. Switches rated to 16 amp. Overall width 63mm. Cut out width 42mm. Intrusion 25mm. Mount screws 3mm roundhead.
Features:
BLA Code: 113756
Facia Colour: Black
Gang: 2
Fuses: No
Overall Length mm: 71
Cut Out Length mm: 36SKU: 113756 -
Electrical, Switches
Marinco® BEP Contour Generation 2 Splash Proof Switch Panels (113757)
Marinco® BEP Contour Generation 2 Splash Proof Switch Panels (113757)
Injection moulded plastic panel with modern contour styling. The switch tray features a rubber mounting gasket and integral cover seal. The cover includes a clear plastic membrane with rubber over-mould allowing the flexibility to operate the switches while providing a clear window for label backlighting. Red LED indicates systems on. Both grey and blue interchangeable contour wave strips are included and custom colours are available, subject to minimum quantities. Mounting screws are bidden beneath the cover. Panels can be mounted horizontally or vertically due to the unique label design. A joiner is available for multiple panel installations. Available in 2, 4 or 6 gang versions with a choice of grey or white facia and with or without fuses. Fused versions have each pair of switches connected to a behind panel mounted AF type blade fuse holder. Supplied as standard with two position, on/off switches and 113694, 28 piece label set. Three position switches, momentary switches and label set 113695 (below) are also available. Suitable for 12 or 24 volt systems. Switches rated to 16 amp. Overall width 63mm. Cut out width 42mm. Intrusion 25mm. Mount screws 3mm roundhead.
Features:
BLA Code: 113757
Facia Colour: White
Gang: 2
Fuses: No
Overall Length mm: 71
Cut Out Length mm: 36SKU: 113757 -
Electrical, Switches
Marinco® BEP Contour Generation 2 Splash Proof Switch Panels (113761)
Marinco® BEP Contour Generation 2 Splash Proof Switch Panels (113761)
Injection moulded plastic panel with modern contour styling. The switch tray features a rubber mounting gasket and integral cover seal. The cover includes a clear plastic membrane with rubber over-mould allowing the flexibility to operate the switches while providing a clear window for label backlighting. Red LED indicates systems on. Both grey and blue interchangeable contour wave strips are included and custom colours are available, subject to minimum quantities. Mounting screws are bidden beneath the cover. Panels can be mounted horizontally or vertically due to the unique label design. A joiner is available for multiple panel installations. Available in 2, 4 or 6 gang versions with a choice of grey or white facia and with or without fuses. Fused versions have each pair of switches connected to a behind panel mounted AF type blade fuse holder. Supplied as standard with two position, on/off switches and 113694, 28 piece label set. Three position switches, momentary switches and label set 113695 (below) are also available. Suitable for 12 or 24 volt systems. Switches rated to 16 amp. Overall width 63mm. Cut out width 42mm. Intrusion 25mm. Mount screws 3mm roundhead.
Features:
BLA Code: 113761
Facia Colour: Black
Gang: 2
Fuses: Yes
Overall Length mm: 71
Cut Out Length mm: 36SKU: 113761 -
Electrical, Switches
Marinco® BEP Contour Generation 2 Splash Proof Switch Panels (113762)
Marinco® BEP Contour Generation 2 Splash Proof Switch Panels (113762)
Injection moulded plastic panel with modern contour styling. The switch tray features a rubber mounting gasket and integral cover seal. The cover includes a clear plastic membrane with rubber over-mould allowing the flexibility to operate the switches while providing a clear window for label backlighting. Red LED indicates systems on. Both grey and blue interchangeable contour wave strips are included and custom colours are available, subject to minimum quantities. Mounting screws are bidden beneath the cover. Panels can be mounted horizontally or vertically due to the unique label design. A joiner is available for multiple panel installations. Available in 2, 4 or 6 gang versions with a choice of grey or white facia and with or without fuses. Fused versions have each pair of switches connected to a behind panel mounted AF type blade fuse holder. Supplied as standard with two position, on/off switches and 113694, 28 piece label set. Three position switches, momentary switches and label set 113695 (below) are also available. Suitable for 12 or 24 volt systems. Switches rated to 16 amp. Overall width 63mm. Cut out width 42mm. Intrusion 25mm. Mount screws 3mm roundhead.
Features:
BLA Code: 113762
Facia Colour: White
Gang: 2
Fuses: Yes
Overall Length mm: 71
Cut Out Length mm: 36SKU: 113762 -
Electrical, Switches
Marinco® BEP Contour Generation 2 Splash Proof Switch Panels (113766)
Marinco® BEP Contour Generation 2 Splash Proof Switch Panels (113766)
Injection moulded plastic panel with modern contour styling. The switch tray features a rubber mounting gasket and integral cover seal. The cover includes a clear plastic membrane with rubber over-mould allowing the flexibility to operate the switches while providing a clear window for label backlighting. Red LED indicates systems on. Both grey and blue interchangeable contour wave strips are included and custom colours are available, subject to minimum quantities. Mounting screws are bidden beneath the cover. Panels can be mounted horizontally or vertically due to the unique label design. A joiner is available for multiple panel installations. Available in 2, 4 or 6 gang versions with a choice of grey or white facia and with or without fuses. Fused versions have each pair of switches connected to a behind panel mounted AF type blade fuse holder. Supplied as standard with two position, on/off switches and 113694, 28 piece label set. Three position switches, momentary switches and label set 113695 (below) are also available. Suitable for 12 or 24 volt systems. Switches rated to 16 amp. Overall width 63mm. Cut out width 42mm. Intrusion 25mm. Mount screws 3mm roundhead.
Features:
BLA Code: 113766
Facia Colour: Black
Gang: 4
Fuses: No
Overall Length mm: 119
Cut Out Length mm: 84SKU: 113766 -
Electrical, Switches
Marinco® BEP Contour Generation 2 Splash Proof Switch Panels (113767)
Marinco® BEP Contour Generation 2 Splash Proof Switch Panels (113767)
Injection moulded plastic panel with modern contour styling. The switch tray features a rubber mounting gasket and integral cover seal. The cover includes a clear plastic membrane with rubber over-mould allowing the flexibility to operate the switches while providing a clear window for label backlighting. Red LED indicates systems on. Both grey and blue interchangeable contour wave strips are included and custom colours are available, subject to minimum quantities. Mounting screws are bidden beneath the cover. Panels can be mounted horizontally or vertically due to the unique label design. A joiner is available for multiple panel installations. Available in 2, 4 or 6 gang versions with a choice of grey or white facia and with or without fuses. Fused versions have each pair of switches connected to a behind panel mounted AF type blade fuse holder. Supplied as standard with two position, on/off switches and 113694, 28 piece label set. Three position switches, momentary switches and label set 113695 (below) are also available. Suitable for 12 or 24 volt systems. Switches rated to 16 amp. Overall width 63mm. Cut out width 42mm. Intrusion 25mm. Mount screws 3mm roundhead.
Features:
BLA Code: 113767
Facia Colour: White
Gang: 4
Fuses: No
Overall Length mm: 119
Cut Out Length mm: 84SKU: 113767 -
Electrical, Switches
Marinco® BEP Contour Generation 2 Splash Proof Switch Panels (113771)
Marinco® BEP Contour Generation 2 Splash Proof Switch Panels (113771)
Injection moulded plastic panel with modern contour styling. The switch tray features a rubber mounting gasket and integral cover seal. The cover includes a clear plastic membrane with rubber over-mould allowing the flexibility to operate the switches while providing a clear window for label backlighting. Red LED indicates systems on. Both grey and blue interchangeable contour wave strips are included and custom colours are available, subject to minimum quantities. Mounting screws are bidden beneath the cover. Panels can be mounted horizontally or vertically due to the unique label design. A joiner is available for multiple panel installations. Available in 2, 4 or 6 gang versions with a choice of grey or white facia and with or without fuses. Fused versions have each pair of switches connected to a behind panel mounted AF type blade fuse holder. Supplied as standard with two position, on/off switches and 113694, 28 piece label set. Three position switches, momentary switches and label set 113695 (below) are also available. Suitable for 12 or 24 volt systems. Switches rated to 16 amp. Overall width 63mm. Cut out width 42mm. Intrusion 25mm. Mount screws 3mm roundhead.
Features:
BLA Code: 113771
Facia Colour: Black
Gang: 4
Fuses: Yes
Overall Length mm: 119
Cut Out Length mm: 84SKU: 113771 -
Electrical, Switches
Marinco® BEP Contour Generation 2 Splash Proof Switch Panels (113772)
Marinco® BEP Contour Generation 2 Splash Proof Switch Panels (113772)
Injection moulded plastic panel with modern contour styling. The switch tray features a rubber mounting gasket and integral cover seal. The cover includes a clear plastic membrane with rubber over-mould allowing the flexibility to operate the switches while providing a clear window for label backlighting. Red LED indicates systems on. Both grey and blue interchangeable contour wave strips are included and custom colours are available, subject to minimum quantities. Mounting screws are bidden beneath the cover. Panels can be mounted horizontally or vertically due to the unique label design. A joiner is available for multiple panel installations. Available in 2, 4 or 6 gang versions with a choice of grey or white facia and with or without fuses. Fused versions have each pair of switches connected to a behind panel mounted AF type blade fuse holder. Supplied as standard with two position, on/off switches and 113694, 28 piece label set. Three position switches, momentary switches and label set 113695 (below) are also available. Suitable for 12 or 24 volt systems. Switches rated to 16 amp. Overall width 63mm. Cut out width 42mm. Intrusion 25mm. Mount screws 3mm roundhead.
Features:
BLA Code: 113772
Facia Colour: White
Gang: 4
Fuses: Yes
Overall Length mm: 119
Cut Out Length mm: 84SKU: 113772 -
Electrical, Switches
Marinco® BEP Contour Generation 2 Splash Proof Switch Panels (113776)
Marinco® BEP Contour Generation 2 Splash Proof Switch Panels (113776)
Injection moulded plastic panel with modern contour styling. The switch tray features a rubber mounting gasket and integral cover seal. The cover includes a clear plastic membrane with rubber over-mould allowing the flexibility to operate the switches while providing a clear window for label backlighting. Red LED indicates systems on. Both grey and blue interchangeable contour wave strips are included and custom colours are available, subject to minimum quantities. Mounting screws are bidden beneath the cover. Panels can be mounted horizontally or vertically due to the unique label design. A joiner is available for multiple panel installations. Available in 2, 4 or 6 gang versions with a choice of grey or white facia and with or without fuses. Fused versions have each pair of switches connected to a behind panel mounted AF type blade fuse holder. Supplied as standard with two position, on/off switches and 113694, 28 piece label set. Three position switches, momentary switches and label set 113695 (below) are also available. Suitable for 12 or 24 volt systems. Switches rated to 16 amp. Overall width 63mm. Cut out width 42mm. Intrusion 25mm. Mount screws 3mm roundhead.
Features:
BLA Code: 113776
Facia Colour: Black
Gang: 6
Fuses: No
Overall Length mm: 167
Cut Out Length mm: 132SKU: 113776 -
Electrical, Switches
Marinco® BEP Contour Generation 2 Splash Proof Switch Panels (113777)
Marinco® BEP Contour Generation 2 Splash Proof Switch Panels (113777)
Injection moulded plastic panel with modern contour styling. The switch tray features a rubber mounting gasket and integral cover seal. The cover includes a clear plastic membrane with rubber over-mould allowing the flexibility to operate the switches while providing a clear window for label backlighting. Red LED indicates systems on. Both grey and blue interchangeable contour wave strips are included and custom colours are available, subject to minimum quantities. Mounting screws are bidden beneath the cover. Panels can be mounted horizontally or vertically due to the unique label design. A joiner is available for multiple panel installations. Available in 2, 4 or 6 gang versions with a choice of grey or white facia and with or without fuses. Fused versions have each pair of switches connected to a behind panel mounted AF type blade fuse holder. Supplied as standard with two position, on/off switches and 113694, 28 piece label set. Three position switches, momentary switches and label set 113695 (below) are also available. Suitable for 12 or 24 volt systems. Switches rated to 16 amp. Overall width 63mm. Cut out width 42mm. Intrusion 25mm. Mount screws 3mm roundhead.
Features:
BLA Code: 113777
Facia Colour: White
Gang: 6
Fuses: No
Overall Length mm: 167
Cut Out Length mm: 132SKU: 113777 -
Electrical, Switches
Marinco® BEP Contour Generation 2 Splash Proof Switch Panels (113781)
Marinco® BEP Contour Generation 2 Splash Proof Switch Panels (113781)
Injection moulded plastic panel with modern contour styling. The switch tray features a rubber mounting gasket and integral cover seal. The cover includes a clear plastic membrane with rubber over-mould allowing the flexibility to operate the switches while providing a clear window for label backlighting. Red LED indicates systems on. Both grey and blue interchangeable contour wave strips are included and custom colours are available, subject to minimum quantities. Mounting screws are bidden beneath the cover. Panels can be mounted horizontally or vertically due to the unique label design. A joiner is available for multiple panel installations. Available in 2, 4 or 6 gang versions with a choice of grey or white facia and with or without fuses. Fused versions have each pair of switches connected to a behind panel mounted AF type blade fuse holder. Supplied as standard with two position, on/off switches and 113694, 28 piece label set. Three position switches, momentary switches and label set 113695 (below) are also available. Suitable for 12 or 24 volt systems. Switches rated to 16 amp. Overall width 63mm. Cut out width 42mm. Intrusion 25mm. Mount screws 3mm roundhead.
Features:
BLA Code: 113781
Facia Colour: Black
Gang: 6
Fuses: Yes
Overall Length mm: 167
Cut Out Length mm: 132SKU: 113781 -
Electrical, Switches
Marinco® BEP Contour Generation 2 Splash Proof Switch Panels (113782)
Marinco® BEP Contour Generation 2 Splash Proof Switch Panels (113782)
Injection moulded plastic panel with modern contour styling. The switch tray features a rubber mounting gasket and integral cover seal. The cover includes a clear plastic membrane with rubber over-mould allowing the flexibility to operate the switches while providing a clear window for label backlighting. Red LED indicates systems on. Both grey and blue interchangeable contour wave strips are included and custom colours are available, subject to minimum quantities. Mounting screws are bidden beneath the cover. Panels can be mounted horizontally or vertically due to the unique label design. A joiner is available for multiple panel installations. Available in 2, 4 or 6 gang versions with a choice of grey or white facia and with or without fuses. Fused versions have each pair of switches connected to a behind panel mounted AF type blade fuse holder. Supplied as standard with two position, on/off switches and 113694, 28 piece label set. Three position switches, momentary switches and label set 113695 (below) are also available. Suitable for 12 or 24 volt systems. Switches rated to 16 amp. Overall width 63mm. Cut out width 42mm. Intrusion 25mm. Mount screws 3mm roundhead.
Features:
BLA Code: 113782
Facia Colour: White
Gang: 6
Fuses: Yes
Overall Length mm: 167
Cut Out Length mm: 132SKU: 113782 -
Electrical, Switches
Marinco® BEP Contour Heavy Duty Battery Master Switch (113551)
Marinco® BEP Contour Heavy Duty Battery Master Switch (113551)
The 720 heavy duty Contour Master Switch is designed for larger vessels with higher amp loads. It
offers 600 amps continuous and 2500 amps cranking capacity. The switch can be recess mounted in a
85mm hole or surface mounted. Screw holes 5mm roundhead. Interchangeable labelling system on the
control knob allows a full range of applications. Switches come standard with the battery symbol label.
Alternative label sets 113690 and 113691 are available. Removable rear cover insulates the rear
terminals against any short circuits and ensures the switch meets ABYC requirements. Non corrosive
construction, self cleaning sliding contacts. Ignition protected.Features:
BLA Code: 113551
Continuous rating: 600 amps DC
Intermittent rating: 800 amps DC
Cranking rating: 2500 amps DC for 10 seconds
Voltage rating: 48 volts DC maximum
Terminal stud size: 2 x 12mmSKU: 113551 -
Electrical, Switches
Marinco® BEP Contour Interior Switches (113310)
Marinco® BEP Contour Interior Switches (113310)
Replicating the same lines as the Contour Switch Panels and Meters, these interior switches compliment the décor of modern boat interiors. The Contour switch can be either, surface or recessed, vertical or horizontal mounted. The switches have a backlit label with systems on indicator. Supplied with 10 piece, symbol label set. Dimensions 60(l) x 30(w) x 18(h) mm (single), 90(l) x 30(w) x 18(h) mm (double). Switch current rating 10amp, 12VDC.
Features:
BLA Code: 113310
Colour: Black
Style: Single
Switch: On/offSKU: 113310 -
Electrical, Switches
Marinco® BEP Contour Interior Switches (113319)
Marinco® BEP Contour Interior Switches (113319)
Replicating the same lines as the Contour Switch Panels and Meters, these interior switches compliment the décor of modern boat interiors. The Contour switch can be either, surface or recessed, vertical or horizontal mounted. The switches have a backlit label with systems on indicator. Supplied with 10 piece, symbol label set. Dimensions 60(l) x 30(w) x 18(h) mm (single), 90(l) x 30(w) x 18(h) mm (double). Switch current rating 10amp, 12VDC.
Features:
BLA Code: 113319
Colour: Black
Style: Double
Switch: On/offSKU: 113319 -
12V Accessories, Electrical
Marinco® BEP Contour Matrix Fume Detector (113125)
Marinco® BEP Contour Matrix Fume Detector (113125)
- 250mA max current draw
- 20% LEL (lower explosive limit) alarm sensitivity
Features:
BLA Code: 113125
Face mm: 88×66
Depth Overall mm: 27
Mount Screws mm: 4 r/h
Power volts: 10-35SKU: 113125 -
12V Accessories, Electrical
Marinco® BEP Contour Matrix Gas Detectors (113121)
Marinco® BEP Contour Matrix Gas Detectors (113121)
- 350mA current draw with two sensors
- 20% lower explosive limit sensitivity
- 800mA max power output
- 700mA pulse, 250mA hold solenoid output
- 88 x 66mm base, 27mm overall depth, 4mm roundhead mount screws
Features:
BLA Code: 113121
Detector: With one sensor
Power volts: 10-35N.B. Gas sensor to be kept dry at all times.
Do not install in environments approaching more than 100% humidity.SKU: 113121 -
12V Accessories, Electrical
Marinco® BEP Contour Matrix Gas Detectors (113122)
Marinco® BEP Contour Matrix Gas Detectors (113122)
- 350mA current draw with two sensors
- 20% lower explosive limit sensitivity
- 800mA max power output
- 700mA pulse, 250mA hold solenoid output
- 88 x 66mm base, 27mm overall depth, 4mm roundhead mount screws
Features:
BLA Code: 113122
Detector: With one sensor and LPG shut off
Power volts: 10-32N.B. Gas sensor to be kept dry at all times.
Do not install in environments approaching more than 100% humidity.SKU: 113122