Accessory Mounts
Showing 121–150 of 185 results
-
Accessory Mounts, Railblaza
RailBlaza Transducer Mount XL (Arm Only)
RailBlaza Transducer Mount XL (Arm Only)
Manage your kayak or canoe’s high freeboard with ease using the Transducer Mount XL Arm from RAILBLAZA. Whether you’re paddling in a canoe or dinghy, this clever kit allows you to easily install and uninstall your fish finder transducer in seconds – no need for adhesives or complex fittings. Give yourself a stress-free fishing experience with the Transducer Mount XL Arm, which can be easily adapted to fit any kayak, canoe, or dinghy either track mounted or hard mounted. With our extensive selection of RAILBLAZA Bases (not included), you’ll be able to customize your installation and use this smart accessory again and again! Get ready to locate the perfect fishing spot without breaking a sweat – grab the Transducer Mount XL Arm from RAILBLAZA today!
SKU: 02-4086-11 -
Boating Accessories, Railblaza
Railblaza Trolling Motor Support Kit
Railblaza Trolling Motor Support Kit
Trolling motor support? We’ve got you covered. Looking for the perfect way to secure your trolling motor shafts while out on the water, or on a trailer? Introducing the Trolling Motor Support Kit from RAILBLAZA–a mount designed to give you height off the deck and tight-fitting retention for your trolling motor shaft. With a total height off deck of 6.3 inches, our kit can be easily removed when not in use, freeing up more space on your deck so you can concentrate at fishing. No matter what you need, this support kit has got your back! Make trolling an easy experience with RAILBLAZA’s Trolling Motor Support Kit!
SKU: 04-4148-11 -
Boating Accessories, Railblaza
RAILBLAZA Trolling Motor Support XL
RAILBLAZA Trolling Motor Support XL
Keep your electric trolling motor safe and secure with the Trolling Motor Support XL from RAILBLAZA! This clever accessory ensures peace of mind out on the water and while traveling. Its easily adjustable height lets you find the perfect fit for your electric trolling motor shaft, and its flexible strap will hold it in place during transit so you can avoid any unnecessary damage or vibration. Thanks to the handy offset feature, this support can be positioned inboard or outboard to match the alignment of your motor perfectly. And when you’re ready to get down to serious fishing, the support can be removed to create an unobstructed deck space. The best part is that it can be mounted to any RAILBLAZA StarPort mount so you can install it on any application – now that’s convenience!
SKU: 02-4158-11 -
Railblaza, Accessory Mounts
RAILBLAZA Vehicle Tie Downs
RAILBLAZA Vehicle Tie Downs
Tired of worrying if your favorite kayak, SUP or surfboard is going to take a dive down the highway? With the Vehicle Tie Down straps you can finally transport in peace! You’ll never have to worry about your load slipping away with these 15′ x 1″ heavy duty Vehicle tie downs. Made with long lasting rubber-coated aluminum cam-buckle and ultra tough, UV resistant polyester webbing – they’re built to handle the wildest trips while protecting your gear and vehicle at the same time. Stop stressing about car-top transportation and start shredding with these Tie Downs!
SKU: 50-0013-11 -
-
Boating Accessories, Railblaza
Railblaza WebEye 30
Railblaza WebEye 30
The WebEye 30 is made for webbing straps, reducing fold-over and fraying. They can assist in securing large items like canisters or dive bottles, and have been known to hold the tips of fishing rods when paired with a G-HOLD.
Features:
- Reduce fold-over and fraying
- Can assist in securing large items
- Tie to fenders, bumpers, rail guards, docks.
SKU: 02-4005-11 -
Boating Accessories, Accessory Mounts, Railblaza
Railblazer Extenda Pole 1000
Railblazer Extenda Pole 1000
Get the Extenda Pole 1000 and use it for your extension mounting needs! This robust, lightweight pole can be used to mount cameras, lights, flags, flashlights and more. It disassembles into three 14” pieces which can be joined together for 38.5″. The base fits perfectly in any RAILBLAZA StarPort mount and at the top of each section you have eye holes perfect for holding flags or tie-down hooks. Tie them up with the Velcro strap provided and you’ve got a great mounting set up that’s ideal for all kinds of applications. With its great corrosion resistance and UV protection, the Extenda Pole 1000 is a must-have for anyone looking to extend or heighten your mounted accessories.
SKU: 02-4067-11 -
Ram Mounts
RAM Mounts Ball Adapter for GoPro® Bases with Universal Action Camera Adapter
RAM Mounts Ball Adapter for GoPro® Bases with Universal Action Camera Adapter is ideal for anyone who needs more versatility from their GoPro® mounting solution. This kit includes a short arm and a two-pronged universal action camera adapter for even greater versatility, allowing for an easily adjustable 360-degree rotation of your camera.
SKU: 109230 -
Ram Mounts
RAM Mounts Cable Manager for Large Electronic Mounts suits D Ball Bases
The RAM Mounts Cable Manager creates an integrated route for electrical wiring and cleanly covers installation holes. A great addition to any surface mounting application. The RAM Mounts Cable Manager is made of glass-filled nylon which has the benefit of creating a barrier between the RAM Mounts Surface Mount and the attachment area; minimizing vibration while reducing fibreglass and gel-coat damage. This item will fit any of the 3.68″ diameter round plates with a 3-hole pattern.
SKU: 109026 -
Ram Mounts
RAM Mounts Cable Manager with AMPS Hole Pattern for Electronic Mounts suits B and C Ball Bases
Ram MountsRAM Mounts Cable Manager with AMPS Hole Pattern for Electronic Mounts suits B and C Ball Bases
The RAM Mounts Cable Manager creates an integrated route for electrical wiring and cleanly covers installation holes. A great addition to any surface mounting application. The RAM Mounts Cable Manager is made of glass-filled nylon which has the benefit of creating a barrier between the RAM Mounts Surface Mount and the attachment area; minimizing vibration while reducing fibreglass and gel-coat damage. This item will work with any of the 2 5/8″ round plates with AMPs hole pattern.
SKU: 109028 -
Ram Mounts
RAM Mounts Double Ball Mount for Lowrance Elite-5 & Elite-7 Ti + More
The RAM Mounts Double Ball Mount for Lowrance Elite-5 & Elite-7 Ti + More consists of a 2.5″ diameter round base that contains the universal AMPS hole pattern, 6-inch double socket arm and adapter base that inserts directly to the back of Lowrance Elite-5, Elite-5 Ti, Elite-7 Ti/Ti², HOOK-3, HOOK-4, HOOK-5 and MARK-5 Fishfinders. The adapter serves as a quick-release mechanism, allowing you to remove or transfer your Fishfinder in seconds. Designed into the mount is a 1.5″ diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm; this with RAM’s rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles.
SKU: 109000 -
Ram Mounts
RAM Mounts Drill-Down Double Ball Mount for Humminbird Helix 5
The powder-coated, marine-grade aluminium RAM Mounts Drill-Down Double Ball Mount for Humminbird Helix 5 consists of a medium-length double socket arm, a 2.5″ diameter round base with a 1.5″ C size ball, and one 1″ x 2.5″ rectangular plate with a 1.5″ C size ball and 4-hole pattern. Rubber ball and socket technology provides shock and vibration damping and allows for near-infinite adjustability so you can position your device at the perfect viewing angle. Compatible with versions of the Humminbird Helix 5.
SKU: 109010 -
Ram Mounts
RAM Mounts Drill-Down Double Ball Mount for Humminbird Helix 7
The powder-coated, marine-grade aluminium RAM Mounts Drill-Down Double Ball Mount for Humminbird Helix 7 consists of a medium-length double socket arm, a 2.5″ diameter round base with a 1.5″ C size ball, and one 1.5″ x 3.5″ rectangular plate with a 1.5″ C size ball. The 1.5″ x 3.5″ rectangular plate contains a 4-hole pattern. Rubber ball and socket technology provides shock and vibration damping and allows for near-infinite adjustability so you can position your device at the perfect viewing angle. Compatible with the Humminbird Helix 7.
SKU: 109012 -
Ram Mounts
RAM Mounts Drill-Down Double Ball Mount for Humminbird Helix 9, 10, and 12
This powder-coated, marine-grade aluminium RAM Mounts Drill-Down Double Ball Mount for Humminbird Helix 9, 10, and 12 consists of a short length double socket arm, a 3.68″ diameter round base with a 2.25″ D size ball, and one 1.5″ x 4.5″ rectangular plate with a 2.25″ D size ball. The round plate contains two mounting holes at 180-degrees and three mounting holes at 120-degrees. The 1.5″ x 4.5″ rectangular plate contains a 4-hole pattern compatible with Humminbird 8, 9 & 10 models. The rubber ball and socket technology provides shock and vibration damping and allows for near-infinite adjustability so you can position your device at the perfect viewing angle.
SKU: 109022 -
Ram Mounts
RAM Mounts Drill-Down Marine Electronic Mount
The RAM Mounts Drill-Down Marine Electronic Mount consists of a medium double socket arm, a 2.5″ diameter round base, and a 6.25″ x 2″ rectangle base. The round base includes a 1.5″ C size rubber ball and contains pre-drilled holes, including the universal AMPS hole pattern. The rectangle base also includes a 1.5″ C size rubber ball and contains a variety of pre-drilled holes that are compatible with several marine electronic devices, including Marine GPS, CB Radios, Ham Radios, Gimbal Brackets and more.
SKU: 109008 -
Ram Mounts
RAM Mounts Dual T-Bolt Track Base for Spline Posts
The RAM Mounts Dual T-Bolt Track Base for Spline Posts is a rugged track mount solution that’s also ideally suited for use when you’re out on the water. If you’re using the Track Base to mount a rod holder while trolling, it’s a great choice as the Track Base won’t loosen. Compatible with the RAM Tough-Track™, it features two knobs and a hole that allows for the attachment of any RAM Spline Post.
SKU: 109320 -
Ram Mounts
RAM Mounts Hand-TrackTM 4″ to 30″
Available in lengths ranging from 4″ to 30″, the RAM Mounts Hand-Track™ is an ideal track and handrail solution for ATVs, boats, kayaks and more. Compatible with all RAM track mounts, the Hand-Track includes two top-loading end caps for attaching to a flat surface. To combine multiple tracks, pair with any top-loading Hand-Track Extension with Center Connector.
SKU: 109120, 109121, 109122, 109123, 109124, 109125, 109126, 109127 -
Ram Mounts
RAM Mounts Hi-Torq™ Wrench for D Size Socket Arms
The RAM Mounts Hi-Torq™ Wrench for D Size Socket Arms is designed to be used with the knob found on “D” size ball arms and mounts. The wrench matches the shape of the knob found on the side of “D” arms, and lets you give the arm an extra tight grip. This wrench was originally made for the military when using the RAM mounts in cold weather, and the knob could not be tightened by hand.
SKU: 109024 -
Ram Mounts
RAM Mounts Large Marine Electronics Mount – D Size
The RAM Mounts Large Marine Electronics Mount – D Size short consists of a SHORT double socket arm, a 3.68″ diameter round base, and an 11″ x 3″ rectangle base.
The RAM Mounts Large Marine Electronics Mount – D Size Medium consists of a MEDIUM double socket arm, a 3.68″ diameter round base, and an 11″ x 3″ rectangle base.
The round base includes a 2.25″ D size rubber ball and contains pre-drilled holes, including the universal AMPS hole pattern. The rectangle base also includes a 2.25″ D size rubber ball and contains a variety of pre-drilled holes that are compatible with several large marine electronic devices, including Marine GPS, CB Radios, Ham Radios, Gimbal Brackets and more.
SKU: 109018, 109020 -
Ram Mounts
RAM Mounts Large Round Plate with Ball – D Size 2.25”
The RAM Mounts Large Round Plate with Ball – D Size 2.25” consists of a 2.25″ diameter rubber ball, connected at right angles to a 3.68″ diameter round base. The base has pre-drilled holes, including two holes at 180 degrees and three holes at 120 degrees.
SKU: 109326 -
Ram Mounts
RAM Mounts Level Cup™ 16oz (473ml) Drink Holder with RAM Mounts Torque™ Medium Rail Base
Take your drink on the road with the new RAM Mounts Torque™ handlebar and rail mounting base. We’ve paired a B-size 1″(25mm) ball base that accommodates bars 3/4″ to 1″ (19-25mm) in diameter with a B-size short-length arm and Level Cup™ Drink Holder & Koozie.
SKU: 109300 -
Ram Mounts
RAM Mounts Level Cup™ XL 32oz (946ml) Drink Holder with RAM Mounts Tough-Claw™
Designed for bigger insulated cups, plastic water bottles or even your reliable steel coffee cup, the RAM Mounts Level Cup™ XL 32oz (946ml) Drink Holder with RAM Mounts Tough-Claw™ keeps your drink upright, regardless of the conditions. This kit includes a Level Cup XL with an integrated Tough-Claw™. The Tough-Claw allows for toolless removal and adjustments on any rail or flat bar. The Tough-Claw can attach to any surface from flat through a 1.5” (38mm) railing. The oversized opening cradles the biggest of gulps and the adjustable bottom piece moves up and down to accommodate taller cups. The rubber feet flex to fit various size cups as well. RAM® Mounts has refined the self-levelling action to keep your cups full.
SKU: 109304 -
Ram Mounts
RAM Mounts Light-Speed™ Fishing Rod Holder with Revolution Socket Arm and Base
The RAM Mounts Light-Speed™ Fishing Rod Holder with Revolution Socket Arm and Base consists of the RAM ROD® Light-Speed™ fishing rod holder, RAM ROD® Revolution ratchet arm with single open socket and 63mm diameter round base that contains the universal AMPS hole pattern. Offering the patented RAM rubber ball, socket and ratcheting feature, you can rotate the rod holder 360 degrees, while tilting the rod holder forward and back for the optimum fishing angle. The RAM ROD® Light-Speed™ is another innovative product in RAM’s long list of high-quality, industry-leading fishing products. Ideally suited for spinning reels and bait casting reels, the Light-Speed rod holder provides smooth action when inserting and removing the fishing rod, yet holds firm in rough water or while trolling. The spring-loaded design enables rapid removal of the rod and reel when a fish is on, and offers easy placement of the rod in the rod holder.
SKU: 109182 -
Ram Mounts
RAM Mounts Marine Electronics Mount – D Size
The RAM Mounts Marine Electronics Mount – D Size Medium (RAM-D-115) consists of a base with a 2.25” diameter D size ball, a standard arm and a 6.25” x 2” marine electronic plate with a D size ball for supporting larger devices.
The RAM Mounts Marine Electronics Mount – D Size Short (RAM-D-115-C) consists of a base with a 2.25” diameter D size ball, a short arm and a 6.25” x 2” marine electronic plate with a D size ball for supporting larger devices.
This marine electronic plate contains different combinations of pre-drilled holes and is a direct fit for 9”-12” fishfinder gimbal brackets. Supports devices such as the Lowrance HDS-9 Gen2 Touch, Garmin GPSMAP 7407 and more.
SKU: 109344, 109345, 109346 -
Ram Mounts
RAM Mounts Marine Electronics Mount – E Size
The RAM Mounts Marine Electronics Mount – E Size is the largest ball joint mount available.
The RAM Mounts Marine Electronics Mount – E Size Medium consists of a base with a 3.35” diameter E size ball, a MEDIUM arm and a 6.25” x 2” marine electronic plate with an E size ball for supporting larger devices.
The RAM Mounts Marine Electronics Mount – E Size Short consists of a base with a 3.35” diameter E size ball, a SHORT arm and a 6.25” x 2” marine electronic plate with an E size ball for supporting larger devices.
SKU: 109337, 109338 -
Ram Mounts
RAM Mounts Pin-Lock™ Security Kit for B and C Size Socket Arms and Gimbal Brackets
The RAM Mounts Pin-Lock™ Security Kit offers the ideal amount of leverage to properly tighten your mount to prevent slippage in heavy chop or in extreme vibration environments. With an emphasis on aesthetics and function, the RAM Mounts Pin-Lock™ Security Kit is low in profile and only adds a small amount of additional bulk to your system when compared to the standard knob included. At a fraction of the cost of currently available keyed locking knobs, the additional peace of mind and tamper resistance come at a very affordable price. The included Pin-Lock™ security knob for Gimbal brackets is a universal design that utilizes various stud sizes to accommodate the most popular GPS, chart plotter, fish finder and VHF radio brands. With a simplistic design, our security knob is extremely affordable and simple to install. Pair this with a security knob for your RAM Mounts and you can feel at ease when leaving your expensive electronics in public places without the concern of theft or tampering.
SKU: 109030, 109032 -
Ram Mounts
RAM Mounts Rachet Vertical Mount/Horizontal Mount with D Ball Round Base to suit Transducer Poles
Ram MountsRAM Mounts Rachet Vertical Mount/Horizontal Mount with D Ball Round Base to suit Transducer Poles
The RAM Mounts Rachet Vertical Mount with D Ball Round Base & RAM Mounts Rachet Horizontal Mount with D Ball Round Base suit transducer poles or other applications.
They are the ultimate mount for transducer poles with a smooth swivelling base and adjustable ratchet arm to a standard D ball round base.SKU: 109354, 109355