-
×
RWB Marine Flo n Go Maxflo Syphon Pump
1 × $123.00
Subtotal: $123.00
Shop
Showing 2941–2970 of 3715 results
-
Bilge Pumps, Pumps and Plumbing
RULE 360GHP Bilge Pump
RULE 360GHP Bilge Pump
12 volt 360 GPH 2.1 amp. RULE Model 24DA
Next generation compact submersible 360 GPH electric pump for use as a bilge or bait pump on smaller craft. Totally submersible pump with water cooled, ignition and TCO protected motor, stainless steel shaft and snap-on strainer base. This pump is extremely efficient, draws low current and offers high capacity output in a very compact housing, to fit into the smallest available space. NON-Automatic pump – requires a Rule float switch to operate automatically. Please note – using the included check valve will reduce the output flow of the pump. Available in 12 volts only.
3 year limited warranty.
- Fully submersible pump – 360 US gallons per hour – 23 litres per minute @ 12v
- Higher flow – optimised impeller to provide greater flow at the same amperage as previous model
- High efficiency, low amp draw ignition protected motor includes true Electromagnetic suppression (EMC)
- 16 gauge tin coated copper electrical wiring with silicone infused water blocking feature to stop water wicking down inside the wiring
- Built-In thermal cut-out (TCO) in the motor provides additional protection for pump & vessel
- Backflow prevention – now includes a removable check valve in the discharge nozzle which reduces the amount of water draining back from the pump discharge hose into the bilge.
- Please note – using the check valve will reduce the rated output flow.
- Threaded discharge port – gives easier installation and maintenance.
- Discharge hose port is included with each pump
- Hidden air vents in the pump prevent air locking in challenging plumbing installations and helps with the check valve operation
- Compact – 99mm Height x 74mm Width x 64mm depth – not including discharge
- 2.1 amp draw @ 12v DC
- Threaded hose outlet suits 20mm (3/4″) hose. 1 x straight port provided
Instruction Manual
SKU: RWB0800 -
Livewell Pumps, Pumps and Plumbing
Rule 430C – 12V 800GPH Tournament Series Livewell Baitwell Pump – Angled Inlet
Livewell Pumps, Pumps and PlumbingRule 430C – 12V 800GPH Tournament Series Livewell Baitwell Pump – Angled Inlet
Rule 430C – 12V 800GPH Tournament Series Livewell Baitwell Pump – Angled Inlet
Rules tournament 400 series dual port thru-hull Livewell cartridge pumps are built on Rules unsurpassed quality and leadership in design and technology. Installation and plumbing is made easier with rotatable base & outlet.
The angled inlet Tournament Series pump is for through hull applications and features an angled 4 inches (102mm) pickup tube.
This model features a glass filled nylon dual port base for optional washdown pump connection, anti-airlock feature, and a heavy-duty long-life motor. The pump has a 1 inch (25mm) NPT female intake, 1-1/8 inch (29mm) discharge outlet, and a ½ inch (6mm) NPT threaded port for washdown installation.
- 3 Styles available – angled inlet, straight inlet, 3/4″ thread valve mount
- 3 Gallon per hour sizes available – 500 GPH, 800 GPH, 1100 GPH
- All styles have an additional 1/2″ threaded plugged inlet port to allow inlet connection of a deckwash pump if desired
- 360 degree rotatable inlet base + outlet for easier installation
- Supplied with threaded rotatable glass fi lled nylon hose barbs
- 1 each straight & 90 deg (20mm in 500 & 800, 28mm in 1100)
- Easy-grip rubber overmould spring loaded removable motor cartridge
- Long lasting and powerful RULE motors (12 volt only)
- Rugged glass fi lled nylon pick-up tube
- 12 volt only. 3 year limited warranty
Instruction Manual
SKU: RWB0053 -
Livewell Pumps, Pumps and Plumbing
Rule 430STC – 12V 800GPH Tournament Series Livewell Baitwell Pump – Straight Inlet
Livewell Pumps, Pumps and PlumbingRule 430STC – 12V 800GPH Tournament Series Livewell Baitwell Pump – Straight Inlet
Rule 430STC – 12V 800GPH Tournament Series Livewell Baitwell Pump – Straight Inlet
Rules tournament 400 series dual port thru-hull Livewell cartridge pumps are built on Rules unsurpassed quality and leadership in design and technology. Installation and plumbing is made easier with rotatable base & outlet.
The straight inlet pump is for through hull applications and features a straight 4-3/4 inch (121mm) pickup tube.
This model features a glass filled nylon dual port base for optional washdown pump connection, anti-airlock feature, and a heavy-duty long-life motor. The pump has a 1 inch (25mm) NPT female intake, 1-1/8 inch (29mm) discharge outlet, and a ½ inch (6mm) NPT threaded port for washdown installation.
- 3 Styles available – angled inlet, straight inlet, 3/4″ thread valve mount
- 3 Gallon per hour sizes available – 500 GPH, 800 GPH, 1100 GPH
- All styles have an additional 1/2″ threaded plugged inlet port to allow inlet connection of a deckwash pump if desired
- 360 degree rotatable inlet base + outlet for easier installation
- Supplied with threaded rotatable glass fi lled nylon hose barbs
- 1 each straight & 90 deg (20mm in 500 & 800, 28mm in 1100)
- Easy-grip rubber overmould spring loaded removable motor cartridge
- Long lasting and powerful RULE motors (12 volt only)
- Rugged glass fi lled nylon pick-up tube
- 12 volt only. 3 year limited warranty
Instruction Manual
SKU: RWB0052 -
Bilge Pumps, Pumps and Plumbing
RULE 500GHP Bilge Pump
RULE 500GHP Bilge Pump
12 volt 500 GPH 1.6 amp. RULE Model 25DA
Next generation compact submersible 500 GPH electric pump for use as a bilge or bait pump on smaller craft. Totally submersible pump with water cooled, ignition and TCO protected motor, stainless steel shaft and snap-on strainer base. These pumps are extremely efficient, draw low current and offer high capacity output in a very compact housing, to fit into the smallest available space. NON-Automatic pump – requires a Rule float switch to operate automatically. Please note – using the included check valve will reduce the output flow of the pump. Available in both 12 volt & 24 volt models.
3 year limited warranty.
- Fully submersible pump – 500 US gallons per hour – 31 litres per minute
- Higher flow – optimised impeller to provide greater flow at the same amperage as previous model
- High efficiency, low amp draw, ignition protected motor includes true Electromagnetic suppression (EMC)
- 16 gauge tin coated copper electrical wiring with silicone infused water blocking feature to stop water wicking down inside the wiring
- Built-In thermal cut-out (TCO) in the motor provides additional protection for pump & vessel
- Backflow prevention – now includes a removable check valve in the discharge nozzle which reduces the amount of water draining back from the pump discharge hose into the bilge.
- Please note – using the check valve will reduce the rated output flow.
- Threaded discharge port – gives easier installation and maintenance.
- Discharge hose port is included with each pump
- Hidden air vents in the pump prevent air locking in challenging plumbing installations and helps with the check valve operation
- Compact – 99mm Height x 74mm Width x 64mm depth – not including discharge
- 1.6 amp draw @ 12v DC. 0.8 amp draw @ 24v DC
- Threaded hose outlet suits 20mm (3/4″) hose. 1 x straight port provided.
Instruction Manual
SKU: RWB0801 -
Bilge Pumps, Pumps and Plumbing
RULE 7700GPH Evacuator High Volume Utility Pump – 12V
RULE 7700GPH Evacuator High Volume Utility Pump – 12V
Features
- High capacity, 12V utility pump
- Discharges up to 7,700 GPH (29,148 LPH)
- Built in back up allows each pump to operate independently, if necessary
- 3-inch barbed discharge port
- Long power leads at 7 feet (2 meters)
The Rule Evacuator high volume utility pump is ideal for fast evacuation of water from a vessel. A favorite of tow boat operators, the Evacuator is comprised of two 4,000 gallon per hour (GPH) or 15,141 liters per hour (LPH) pumps in tandem, with a net volume at open discharge of 7,700 GPH or 29,148 LPH.
The Evacuator pump is a useful utility pump for non-marine applications as well, including dewatering flooded basements, swimming pools, or excavations.
A great alternative to gas-powered pumps, the Evacuator simply connects to a 12V battery. A 3-inch discharge hose is required in this application.
Instruction Manual
SKU: RWB5168 -
Bilge Pumps, Pumps and Plumbing
RULE 800GHP Bilge Pump
RULE 800GHP Bilge Pump – 12 volt 800 GPH 3.4 amp. RULE Model 20DA
water cooled, ignition and TCO protected motor, stainless steel shaft and snap-on strainer base. These pumps are extremely efficient, draw low current and offer high capacity output in a very compact housing, to fit into the smallest available space. NON-Automatic pump – requires a Rule float switch to operate automatically. Please note – using the included check valve will reduce the output flow of the pump. Available in both 12 volt & 24 volt models.
3 year limited warranty.
- Fully submersible pump – 800 US gallons per hour – 50 litres per minute
- Higher flow – optimised impeller to provide greater flow at the same amperage as previous model
- High efficiency, low amp draw, ignition protected motor includes true Electromagnetic suppression (EMC)
- 16 gauge tin coated copper electrical wiring with silicone infused water blocking feature – to stop water wicking down inside the wiring
- Built-In thermal cut-out (TCO) in the motor provides additional protection for pump & vessel
- Backflow prevention – now includes a removable check valve in the discharge nozzle which reduces the amount of water draining back from the pump discharge hose into the bilge.
- Please note – using the check valve will reduce the rated output flow.
- Threaded discharge port – gives easier installation and maintenance.
- Discharge hose port is included with each pump
- Hidden air vents in the pump prevent air locking in challenging plumbing installations and helps with the check valve operation
- Compact – 112mm Height x 74mm Width x 64mm depth – not including discharge
- 3.4 amp draw @ 12v DC. 1.7 amp draw @ 24v DC
- Threaded hose outlet suits 20mm (3/4″) hose. 1 x straight port provided
Instruction Manual
SKU: RWB0803 -
Bilge Pumps, Pumps and Plumbing
Rule IL280P – Slimline Submersible and Inline Pump 280GPH
Rule IL280P – Slimline Submersible and Inline Pump 280GPH
The Rule 280 GPH (Gallons Per Hour) In- Line Pump is a muti-purpose submersible in-line pump that can be used for water (either fresh or salt) as well as diesel. Whether you use it as a transfer pump for fuel, as a bilge, or for deck pumping requirements like a deck wash/wash down, then this heavy duty pump is incredibly reliable. The Rule name has been long associated with bilge pumps and this is with good reason. Hard wearing, heavy duty and destined for longevity, Rule pumps are built tough to deal with the rigors of a harsh marine and off-road environment. Having a reliable bilge pump can make the difference between having a minor incident on the water or a disaster; and is something that should be very strongly considered: without one it is up to you to manually bail out any water that finds its way into your boat. For the full range of pumps, hoses, fittings and clamps available at BCF call in store and talk to one of our friendly knowledgeable staff to find the product that is right for you.
- 280 GPH
- 12 volt
- Pumps fresh and seawater, diesel and anti-freeze
- Wash down for cars, vehicles, anchors and decks
- Deck shower
- Under engine bilge pumping
- Diesel refueling and transfer
- Garden watering
- Container filling and emptying
- Sink draining
- Engine winterizing
- Kits include hose, battery clips and adjustable spray nozzle (see specifications tab)
Instruction Manual
SKU: RWB0085 -
Bilge Pumps, Pumps and Plumbing
RULE Lo-Pro 900 Auto Bilge Pump
RULE Lo-Pro 900 Auto Bilge Pump
Features
- Choice of operational mode to meet your specific requirements – high or low water sensing mode or automatic timed mode
- 900 (gph) 3407 (lph)
- Compact, efficient, long-life motors with ability to run dry for short periods
- Fail safe back up feature
- Fully rotating discharge body to ease install
- Choice of discharge ports supplied with each pump
- Backflow prevention valve
- Horizontal or vertical mounting to accommodate your boat’s bilge
- Built-in Thermal Cut-Off (TCO) provides added protection for pump and vessel
- Marine-grade blocked wiring
- Silent operation with minimal vibration
- Ignition protection
- CE and ISO 8849 certification
The Rule LoPro bilge pump accommodates tight spaces and shallower bilges. Multiple operational modes are available to meet your specific requirements.
The LP900S model features two automated modes. The first one engages the pump when the water level reaches your desired level of either 2” (5 cm) or 1.3” (3.25 cm); and the second one checks for water by briefly turning on the pump every 2.5 minutes.
Instruction Manual
SKU: RWB5159 -
Bilge Pumps, Electrical, Pumps and Plumbing, Switches
Rule Super Switch Bilge Pump Float Switch
Rule Super Switch Bilge Pump Float Switch
RULE SuperSwitch – to 20 amp
Rule Automatic Float Switches are the world’s largest selling marine fl oat switches. They are designed to automatically activate your Non-Automatic bilge pump when water is present. They are simple, non-mercury, environmentally responsible snap switches which have been tested to over 1 million cycles. All are ignition protected, ultrasonically welded and sealed, to give reliable, troublefree service. The wiring is blocked to keep out moisture and exits the top of the switch to keep them high and dry. Different models are available to suit various pump amperage loads. No battery drain and no exposed metal to corrode.
Designed for the toughest applications and backed by a Rule 5 year warranty. Heavy duty double insulated blocked wiring and a wide, free action fl oat give superior buoyancy and performance. Removable snap-on base for easy fi tting, cleaning and servicing. The SuperSwitch is suitable for any brand of submersible bilge pump 12v – 24v – 32 volt with a maximum draw of 20 amp. It suits all models of Rule DC non-automatic pumps. Base footprint : 66 x 45mm. 135mm length x 54mm width.
Instruction Manual
Inside a Rule Float Switch
SKU: RWB0019 -
Bilge Pumps, Electrical, Pumps and Plumbing, Switches
RULE-A-MATIC Bilge Pump Float Switch
RULE-A-MATIC Bilge Pump Float Switch
RULE-A-Matic float switch – to 14 amp
Rule Automatic Float Switches are the world’s largest selling marine fl oat switches. They are designed to automatically activate your Non-Automatic bilge pump when water is present. They are simple, non-mercury, environmentally responsible snap switches which have been tested to over 1 million cycles. All are ignition protected, ultrasonically welded and sealed, to give reliable, troublefree service. The wiring is blocked to keep out moisture and exits the top of the switch to keep them high and dry. Different models are available to suit various pump amperage loads. No battery drain and no exposed metal to corrode.
This non-mercury automatic fl oat switch has set the standard for the marine industry for years. It has improved blocked wiring for greater durability and water resistance which has again raised the standard. Removable snap-on base for easy fi tting, servicing and cleaning. It is suitable for any brand of submersible bilge pump 12v – 24v – 32 volt with a maximum draw of 14 amp. It suits all Rule DC non-automatic pumps except the 3700 & 4000GPH 12v pumps. 2 year limited warranty. Base footprint : 66 x 45mm. 127mm length x 45mm width
Instruction Manual
Inside a Rule Float Switch
SKU: RWB0022 -
Bilge Pumps, Pumps and Plumbing
Rule-Mate Bilge Pump – 500/800/1100 GHP
Rule-Mate Bilge Pump – 500/800/1100 GHP
Rule-Mate bilge pumps provide ultimate pumping performance, which helps keep your bilge clear of nuisance water, building on the genuine Rule design.
Rule-Mate bilge pumps operate using an internal level sensor.
- For 500/800/1100 GPH models, when water reaches 2 inches (5 cm), the pump will automatically activate, removing water from the bilge. When the water level reaches 3/8 inches (0.9 cm) the pump will turn off until the water level rises again
- For 1500/2000 GPH models, when water reaches 2-3/4 inches (7 cm), the pump will automatically activate, removing water from the bilge. When the water level reaches 5/8 inches (1.6 cm) the pump will turn off until the water level rises again
Bilges are not always clean and free from debris. If the Rule-Mate level sensor becomes fouled by debris or contaminated water, its unique back-up feature will prevent the pump from entering a run-on condition, protecting the battery while maintaining automatic operation.
PRODUCT FEATURES
- Higher Flow — optimized impeller to provide up to 10% more flow at the same amperage as previous models with capacities from 500-2000 GPH (1893-7571 LPH)
- Auto Sense Intelligence — integral water level sensor controls the pump automatically
- Back Up Feature — prevents continuous running if sensor is fouled by debris, pump reverts to 2.5 minute cycle mode
- Smaller Footprint — 2/3 the size of previous models (500-1100 GPH models only)
- Built-In Thermal Cut-Off (TCO) — provides added protection for pump and vessel
- Back Flow Prevention — reduces the amount of water left over in the bilge, reducing odor and helping keep your bilge cleaner (500-1100 GPH models only)
- Hidden Air Vents in the Body — helps prevent air locking in challenging plumbing installations and helps with the check valve (500-1100 GPH models only)
- Threaded Discharge — easier installation, easier maintenance
Instruction Manual
Rule-Mate Bilge Pump Key Features Overview
SKU: RWB0822, RWB0824, RWB0826 -
Fuel Tanks & Accessories, Tanks
RWB Marine 12 Litre Fuel Tank & Gauge
RWB Marine 12 Litre Fuel Tank & Gauge
Highest quality, fully approved marine fuel tanks made from tough, dent-resistant, lightweight, non-rusting, high density polyethylene. Easy to carry, easy to stow, safe and sturdy. These fuel tanks are fully approved to AS2906 and have the Australian standard mark stamped into the tank. Suitable for use with petrol and ethanol blended fuel. These tanks will also handle Diesel fuel – however if a diesel return line is required there is no standard modiflcation available to return the line to the tank.
- 12 litre (3.2 US gallon) capacity.
- Supplied with vented cap and fuel pickup assembly with filter.
- Carried horizontally.
- 355 L x 255 W x 220mm H.
SKU: RWB3450 -
Boating Accessories
RWB Marine 40 Litre Bait Tank with Lid
RWB Marine 40 Litre Bait Tank with Lid
RWB Livewell Bait Tank with Hatch.
- Hatch cut out : 200mm x 295mm
- Bait Tank Height : 300mm (With Hatch)
- Bait Tank Width : 510mm
- Bait Tank Depth : 270mm
- Installation height: You will need 80mm of clearance below the tank to allow for access and connection of a drain hose. Total installation height is 380mm.
SKU: RWB10180 -
Fuel Tanks & Accessories, Tanks
RWB Marine 45 Litre Low Profile Fuel Tank & Gauge
RWB Marine 45 Litre Low Profile Fuel Tank & Gauge
Canadian made injected moulded fuel tanks made from highdensity polyethylene with UV stabilised resin Includes vented fuel cap and fuel level gauge A variety of capacities and sizes are available. Height dimensions shown below include the fuel gauge / cap Suitable for use with petrol and ethanol blended fuel These tanks will also handle diesel fuel however if a diesel return line is required there is no standard modification available to return the line to the tank.
SKU: RWB3678 -
Seating, Seats
RWB Marine Axis Admiral Compact Seat – Grey / Charcoal
RWB Marine Axis Admiral Compact Seat – Grey / Charcoal
Attractive 2 colour carbon fibre pattern seats. Very comfortable padded and upholstered bucket style seats in a relatively compact overall size. Bolster thigh support for comfort when seated – and then flips up on aluminium hinges to give great support when standing in the helm position. Heavy duty rotationally moulded base frame for strength and support. Thick closed cell foam padding with marine grade vinyl upholstery. These premium seats require a seat slide for mounting.
- Flip-up hinged and padded thigh support
- Heavy duty rotationally moulded base
- Thick foam padding for comfort & support
- Marine grade heavy duty vinyl upholstery
- Compact size for a bucket style seat
- Width : 525 Depth : 670 Height : 600mm
- Designed for seat slide mounting only
- Attractive 2 colour carbon fibre patterns
SKU DESCRIPTION COLOR RWB5031 
Axis Admiral Compact Seat
White/Black RWB5032 
Axis Admiral Compact Seat
Grey/Charcoal *Items deemed to be bulky or requiring freight to areas considered country or remote may incur additional freight charges.
SKU: RWB5032 -
Seating, Seats
RWB Marine Axis Admiral Compact Seat – White / Black
RWB Marine Axis Admiral Compact Seat – White / Black
Attractive 2 colour carbon fibre pattern seats. Very comfortable padded and upholstered bucket style seats in a relatively compact overall size. Bolster thigh support for comfort when seated – and then flips up on aluminium hinges to give great support when standing in the helm position. Heavy duty rotationally moulded base frame for strength and support. Thick closed cell foam padding with marine grade vinyl upholstery. These premium seats require a seat slide for mounting.
- Flip-up hinged and padded thigh support
- Heavy duty rotationally moulded base
- Thick foam padding for comfort & support
- Marine grade heavy duty vinyl upholstery
- Compact size for a bucket style seat
- Width : 525 Depth : 670 Height : 600mm
- Designed for seat slide mounting only
- Attractive 2 colour carbon fibre patterns
SKU DESCRIPTION COLOR RWB5031 Axis Admiral Compact Seat White/Black RWB5032 Axis Admiral Compact Seat
Grey/Charcoal *Items deemed to be bulky or requiring freight to areas considered country or remote may incur additional freight charges.
SKU: RWB5031 -
Seating, Seats
RWB Marine Axis H52 Flip Up Compact Seat – Charcoal/Light Grey
RWB Marine Axis H52 Flip Up Compact Seat – Charcoal/Light Grey
Very comfortable padded and upholstered bucket style seats in a relatively compact overall size. Bolster thigh support for comfort when seated – and then flips up on aluminium hinges to give great support when standing in the helm position. Heavy duty rotationally moulded base frame for strength and support. Thick closed cell foam padding with marine grade vinyl upholstery. These premium seats require a seat slide for mounting.
- Flip-up hinged and padded thigh support
- Heavy duty rotationally moulded base
- Thick foam padding for comfort & support
- Marine grade heavy duty vinyl upholstery
- Relatively compact size for a bucket style seat
- Width : 520 Depth : 670 Height : 560mm
- 3 colour combinations available
- Designed for mounting to a seat slide only
SKU DESCRIPTION COLOR RWB5097 
Flip Up Compact Seat Charcoal/Light Grey RWB5098 
Flip Up Compact Seat Dark Blue/White RWB5099 
Flip Up Compact Seat White/Very Light Grey *Items deemed to be bulky or requiring freight to areas considered country or remote may incur additional freight charges.
SKU: RWB5097 -
Seating, Seats
RWB Marine Axis H52 Flip Up Compact Seat – Dark Blue / White
RWB Marine Axis H52 Flip Up Compact Seat – Dark Blue / White
Very comfortable padded and upholstered bucket style seats in a relatively compact overall size. Bolster thigh support for comfort when seated – and then flips up on aluminium hinges to give great support when standing in the helm position. Heavy duty rotationally moulded base frame for strength and support. Thick closed cell foam padding with marine grade vinyl upholstery. These premium seats require a seat slide for mounting.
- Flip-up hinged and padded thigh support
- Heavy duty rotationally moulded base
- Thick foam padding for comfort & support
- Marine grade heavy duty vinyl upholstery
- Relatively compact size for a bucket style seat
- Width : 520 Depth : 670 Height : 560mm
- 3 colour combinations available
- Designed for mounting to a seat slide only
SKU DESCRIPTION COLOR RWB5097 Flip Up Compact Seat Charcoal/Light Grey RWB5098 Flip Up Compact Seat Dark Blue/White RWB5099 Flip Up Compact Seat White/Very Light Grey *Items deemed to be bulky or requiring freight to areas considered country or remote may incur additional freight charges.
SKU: RWB5098 -
Seating, Seats
RWB Marine Axis H52 Flip Up Compact Seat – White / Very Light Grey
RWB Marine Axis H52 Flip Up Compact Seat – White / Very Light Grey
Very comfortable padded and upholstered bucket style seats in a relatively compact overall size. Bolster thigh support for comfort when seated – and then flips up on aluminium hinges to give great support when standing in the helm position. Heavy duty rotationally moulded base frame for strength and support. Thick closed cell foam padding with marine grade vinyl upholstery. These premium seats require a seat slide for mounting.
- Flip-up hinged and padded thigh support
- Heavy duty rotationally moulded base
- Thick foam padding for comfort & support
- Marine grade heavy duty vinyl upholstery
- Relatively compact size for a bucket style seat
- Width : 520 Depth : 670 Height : 560mm
- 3 colour combinations available
- Designed for mounting to a seat slide only
SKU DESCRIPTION COLOR RWB5097 Flip Up Compact Seat Charcoal/Light Grey RWB5098 Flip Up Compact Seat Dark Blue/White RWB5099 Flip Up Compact Seat White/Very Light Grey *Items deemed to be bulky or requiring freight to areas considered country or remote may incur additional freight charges.
SKU: RWB5099 -
Seating, Seats
RWB Marine Axis Ranger Hi Back PRO Folding Seat Blue / White
RWB Marine Axis H52 Flip Up Compact Seat – White / Very Light Grey
* This product due to its bulky nature requires an additional freight surcharge. We will contact you regarding this depending on location – or simply contact us on 0732658016 for a quote.
The Ranger Hi-Back Pro folding boat seat is a premium quality folding seat. Upholstered in a new style textured vinyl with diamond stitched inserts over plush foam padding.
SKU: RWB6507 -
Marine Care
RWB Marine Boat Maintenance Kit
RWB Marine Boat Maintenance Kit
A practical kit to keep on board for cleaning the boat and for use as a boat hook. Includes :
- Telescopic anodised aluminium pole with threaded shaft to attach heads
- Screw-on deck scrub brush head
- Screw-on mop head
- Screw-on boat hook head
SKU: RWB2154 -
Marine Care
RWB Marine Boat Maintenance Kit
RWB Marine Boat Maintenance Kit
A practical kit to keep on board for cleaning the boat and for use as a boat hook. Includes :
- Telescopic anodised aluminium pole with threaded shaft to attach heads
- Screw-on deck scrub brush head
- Screw-on mop head
- Screw-on boat hook head
SKU: RWB5376-1 -
Boating Accessories, Livewell Pumps, Pumps and Plumbing
RWB Marine Deluxe Livewell Bait Tank with Hatch, Rule Pump & Flowrite Fittings
Boating Accessories, Livewell Pumps, Pumps and PlumbingRWB Marine Deluxe Livewell Bait Tank with Hatch, Rule Pump & Flowrite Fittings
RWB Marine Deluxe Livewell Bait Tank with Hatch, Rule Pump & Flowrite Fittings
RWB Deluxe Livewell Bait Tank Kit.
- 1 x RWB Marine 30 Litre tank
- 1 x QWIK-LOK Rule pump adaptor
- 1 x Threaded standpipe 12″
- 1 x Drain outlet heavy duty hose 28mm x 1.6M
- 1 x In-line heavy duty hose 20mm x 1.6M
- 2 x Stainless steel hose clamp 21-38mm
- 2 x Stainless steel hose clamp 13-25mm
- 1 x Nuova Rade hatch 375mm x 275mm Italian made
- 1 x Rule Tournament 403 dual port 800GPH pump
- 1 x Threaded standpipe drain elbow
- 1 x QWIK-LOK Thru hull straight outlet 1 1/8″
- 1 x QWIK-LOK spray head
- 1 x QWIK-LOK straight sockets 3/4″
- 2 x QWIK-LOK straight sockets 1 1/8″
- 1 x QWIK-LOK adaptor for Rule pump 3/4″
SKU: RWB10184 -
Anchoring and Mooring, Fenders, Floats, Buoys, Boat Hooks
RWB Marine Fender White/Blue x 580
RWB Marine Fender White/Blue x 580
Top quality heavy duty infl atable fenders, made in Holland. Manufactured from UV resistant white PVC with BLUE reinforced star pattern heads in the classic European style. These fenders are commercial quality at a very realistic price. A large range of sizes are available to suit small runabouts up to large yachts and cruisers. Available as fender only – Infl ate fenders with an air compressor or use a special majoni bike pump adaptor fitting.
SKU: RWB1541 -
Fuel Tanks & Accessories, Pumps and Plumbing
RWB Marine Flo n Go Maxflo Syphon Pump
RWB Marine Flo n Go Maxflo Syphon Pump
The Flo n’ Go MaxFlo pump turns your gas can in to a safe, quick and easy fluid transfer system. The patented pump allows you to stop and restart the flow of fuel with the press of a trigger. No lifting. No spills. No overfills. Child safety lock. Flow rate of 2 gallons per minute in Siphon Mode.
SKU: RWB3432 -
Fittings, Pumps and Plumbing
RWB Marine HoseCoil Expandable Hose Kit PRO Gold 15m
RWB Marine HoseCoil Expandable Hose Kit PRO Gold 15m
The HoseCoil Expandable PRO is a premium product. The hose expands to 3x length under pressure, then retracts after use for compact storage in the nylon mesh and polyester bag. The Expandable PRO hose features a multi-layer construction consisting of a soft outer cover and a rubber inner tube. The attractive gold and white braided outer cover is made from Dacron, which is known for its tough and abrasion resistant properties. The large diameter of the inner hose produces 30% more flow rate than most other expandable hose kits, and the large wall thickness of the tubing provides added strength and durability. The Brass Twist Nozzle significantly increases water pressure for improved cleaning and spray distance. It features an adjustable spray pattern, comfortable grip, and rubber tip to protect the deck. Includes :
- Gold/white expandable hose.
Heavy duty brass twist nozzle. Nylon mesh and polyester storage bag.
SKU: J0027-161 -
Fittings, Pumps and Plumbing
RWB Marine HoseCoil Expandable Hose Kit PRO Gold 22.5m
RWB Marine HoseCoil Expandable Hose Kit PRO Gold 22.5m
The HoseCoil Expandable PRO is a premium product. The hose expands to 3x length under pressure, then retracts after use for compact storage in the nylon mesh and polyester bag. The Expandable PRO hose features a multi-layer construction consisting of a soft outer cover and a rubber inner tube. The attractive gold and white braided outer cover is made from Dacron, which is known for its tough and abrasion resistant properties. The large diameter of the inner hose produces 30% more flow rate than most other expandable hose kits, and the large wall thickness of the tubing provides added strength and durability. The Brass Twist Nozzle significantly increases water pressure for improved cleaning and spray distance. It features an adjustable spray pattern, comfortable grip, and rubber tip to protect the deck. Includes :
- Gold/white expandable hose.
Heavy duty brass twist nozzle. Nylon mesh and polyester storage bag.
SKU: J0027-162 -
Fittings, Pumps and Plumbing
RWB Marine HoseCoil Expandable Hose Kit PRO Gold 7.5m
RWB Marine HoseCoil Expandable Hose Kit PRO Gold 7.5m
The HoseCoil Expandable PRO is a premium product. The hose expands to 3x length under pressure, then retracts after use for compact storage in the nylon mesh and polyester bag. The Expandable PRO hose features a multi-layer construction consisting of a soft outer cover and a rubber inner tube. The attractive gold and white braided outer cover is made from Dacron, which is known for its tough and abrasion resistant properties. The large diameter of the inner hose produces 30% more flow rate than most other expandable hose kits, and the large wall thickness of the tubing provides added strength and durability. The Brass Twist Nozzle significantly increases water pressure for improved cleaning and spray distance. It features an adjustable spray pattern, comfortable grip, and rubber tip to protect the deck. Includes :
- Gold/white expandable hose.
Heavy duty brass twist nozzle. Nylon mesh and polyester storage bag.
SKU: J0027-160 -
Fishing Gear
RWB Marine Large Deluxe Viewing Glass Bucket with Flexible Face Seal – Underwater Viewing Bathiscope
-5%
Fishing GearRWB Marine Large Deluxe Viewing Glass Bucket with Flexible Face Seal – Underwater Viewing Bathiscope
RWB Marine Large Deluxe Viewing Glass Bucket with Flexible Face Seal – Underwater Viewing Bathiscope
Large deluxe bathiscope provides outstanding clear views of objects beneath the water surface. Soft rubber face seal provides excellent viewing comfort. All around handle offers safe and secure grip. Easily and quickly dismantles into four nesting pieces for easy storage. 510 x 360mm total assembled size.
Just break the water surface with the lens of the bathiscope and look through the soft rubber face piece for a view as far as the water clarity permits. Check your mooring, anchor, cray pots or traps
- Search for fish
- View coral reefs
- Simply use to see what’s below
- Dismantles into four pieces for ease of storage
High quality, heavy duty orange plastic construction with all round handle and soft flexible rubber face seal. This bathiscope quickly and easily dismantles into four pieces which fit inside each other for easy storage. 510mm x 360mm total size assembled.
SKU: RWB-3796
