Rod Holder Oval Flush Mount Angled White no Cover - Plastic (192566) Subtotal: $9.90
Shop
Showing 2911–2940 of 3735 results
-
Lighting, Underwater
Relaxn Underwater Trailer Boat Light – Surface Mount
Relaxn Underwater Trailer Boat Light – Surface Mount
Sealed watertight construction making it ideal for underwater lighting and trim tab light.
- Primary spot output is 60° from mounting surface and diffused lens produces a 90° light output.
- Sealed in a polycarbonate housing.
- Protection Rating: IP68.
- 316G stainless steel frame.
- 2 year warranty.
Note:Â Recommended for trailer boats. Designed for underwater use only
PART NUMBER PACK SIZE AMPS LED COLOUR LED QTY. VOLTS LUMEN WATTS L X W X D SAW-709626 
Single 0.9 Blue 12 10V-30V 300 15W 170mm x 50mm x 21mm SAW-709626-6 6 Pack 0.9 Blue 12 10V-30V 300 15W 170mm x 50mm x 21mm SAW-709626-30 30 Pack 0.9 Blue 12 10V-30V 300 15W 170mm x 50mm x 21mm SKU: SAW-709626, SAW-709626-6, SAW-709626-30 -
Electrical, Switches
Relaxn Voltage Sensitive Relay
Relaxn Voltage Sensitive Relay
• Ideal for dual battery systems or to switch high current appliances.
• Suits for ATV, boats, RV’s, marine vehicle, caravan and truck.
• VSR allows 2 batteries to be charged at the same time.
• No voltage drops comparing to battery isolator diodes (0.6V).
• Robust glass fibre reinforced nylon enclosure.
• Built-in LED indication (ON when VSR engages).
• Surface or panel mount options provide flexibility when installing.
• Optional Storage Mode allows zero power consumption when the engine is off.
• CE ISO8846 / SAEJ1171 Ignition Protected.
• Patented Made in Taiwan.Part No. SAW-53083 
Width 69mm Height 69mm Depth 58mm Nominal Voltage 12V Cut In Voltage 13.3V Cut Out Voltage 12.8V Continuous Rating 125 Amps Intermittent Rating 140 Amps Power Consumption 10mA (Standby) / 330mA (Engage) / 0mA (Storage) Terminal Studs M6 SKU: SAW-53083 -
Boating Accessories, Handrails and Handles
Ribbed Grip Handrail With Studs (29814)
Ribbed Grip Handrail With Studs (29814)
• Heavy duty polished 304G stainless steel.
• 25mm tube.
• Height from base to top of handle 60mm.
• Flanged oval base.Features:
Part No.: 29814
Description: Stainless Steel Grip Handrail with Studs
Length (mm): 260
Width (mm): 30
Studs Whitworth Thread: 2 x 5/16″
Base (mm): 30 x 45
Centre-centre: 8-5/8″SKU: 29814 -
Boating Accessories, Handrails and Handles
Ribbed Grip Handrail With Studs (29815)
Ribbed Grip Handrail With Studs (29815)
• Heavy duty polished 304G stainless steel.
• 25mm tube.
• Height from base to top of handle 60mm.
• Flanged oval base.Features:
Part No.: 29815
Description: Stainless Steel Grip Handrail with Studs
Length (mm): 350
Width (mm): 30
Studs Whitworth Thread: 2 x 5/16″
Base (mm): 30 x 45
Centre-centre: 12″SKU: 29815 -
Boating Accessories, Handrails and Handles
Ribbed Grip Handrail With Studs (29816)
Ribbed Grip Handrail With Studs (29816)
• Heavy duty polished 304G stainless steel.
• 25mm tube.
• Height from base to top of handle 60mm.
• Flanged oval base.Features:
Part No.: 29816
Description: Stainless Steel Grip Handrail with Studs
Length (mm): 450
Width (mm): 30
Studs Whitworth Thread: 2 x 5/16″
Base (mm): 30 x 45
Centre-centre: 24″SKU: 29816 -
Boating Accessories, Handrails and Handles
Ribbed Grip Handrail With Studs (29817)
Ribbed Grip Handrail With Studs (29817)
• Heavy duty polished 304G stainless steel.
• 25mm tube.
• Height from base to top of handle 60mm.
• Flanged oval base.Features:
Part No.: 29817
Description: Stainless Steel Grip Handrail with Studs
Length (mm): 500
Width (mm): 30
Studs Whitworth Thread: 2 x 5/16″
Base (mm): 30 x 45
Centre-centre: 16″SKU: 29817 -
Boating Accessories, Handrails and Handles
Ribbed Grip Handrail With Studs (29818)
Ribbed Grip Handrail With Studs (29818)
• Heavy duty polished 304G stainless steel.
• 25mm tube.
• Height from base to top of handle 60mm.
• Flanged oval base.Features:
Part No.: 29818
Description: Stainless Steel Grip Handrail with Studs
Length (mm): 655
Width (mm): 30
Studs Whitworth Thread: 2 x 5/16″
Base (mm): 30 x 45
Centre-centre: 18″SKU: 29818 -
Deck Fittings, Rigging
Rigging Hose 50mm / Mtr – Black (192524M)
Rigging Hose 50mm / Mtr – Black (192524M)
All the components required to complete a professional rigging system. Protects outboard engine cables and wiring from dirt, abrasion, sun, salt and water. The hose is durable, flexible and kink resistant. The mount flanges and split union are moulded from U.V. stabilised polypropylene.
Features
BLA Code: (B) 192524
Description: Rigging hose 50mm x 1m (sold per metre)
Colour: BlackSKU: 192524 -
Boating Accessories
RitchieAngler Bracket Mounted Compass
RitchieAngler Bracket Mounted Compass
Features:
- 2 3/4″ (70 mm) Direct-Reading Dial
- Easily Adjustable Bracket Mount with Thumbscrews
- No-Glare Gray Finish with High-Visibility Blue Dial
- Distinctive RitchieAngler graphics
- Scientifically Matched Sapphire Jewel & Hardened Steel Pivot Dial Movement
- Internal Green Night Lighting
- Built-in Compensators to Easily Adjust for Deviation
- Movable Sun Shield
- DirectiveForce Magnets
- 100% Repairable
- Exclusive 5-Year Ritchie Warranty
SKU: RA-91 -
Bimini Tops and T-Tops, Biminis, Canopies and Boat Covers
Rocket Launcher Bimini Top Extender
-
Secures tightly to the boat’s existing rod rack with rail mounts, thumb screws, web strapping and buckles for a firm hold.
-
Made with lightweight yet strong 25mm anodised aluminium poles for durability and adjustability.
-
Compatible with Oceansouth clamp-on rod racks and most 25mm stainless steel or aluminium frames.
-
Provides reliable sun protection and is easy to remove and store when unused.
-
Marine-Grade durability: UV-treated AIRFLOW fabric withstands harsh conditions and handles speeds up to 40 knots.
SKU: n/a -
-
Boating Accessories, Rod Holders
Rod Holder / Hanger with Quick Release (49135)
Rod Holder / Hanger with Quick Release (49135)
Adjus Rod Holder/Hanger
• Polished 316g Stainless.
• Versatile mounting options.
• Safe & secure.
• Adjustable reel hanger to suit most overhead reels.
• Dimensions L 73mm x W 28mm x H 31mm.
• Adjust from 45mm – 65mm.
• Screw size Ø 6mm.
Revolving Spring loaded rod tip holder
• Dimensions L 60mm x W 20mm x H 59mm.
• Screw size Ø 5mm.
• Screw footprint 29mm centre – centre.Features:
Part No:49135
Description:Adjustable Rod Holder/Hanger with Quick Release Mechanism
Dimensions L x W xH (mm):73x28x31SKU: 49135 -
Rod Holders
Rod Holder Flush Mount Angled Black – Plastic (192562)
Rod Holder Flush Mount Angled Black – Plastic (192562)
Economical one piece moulded plastic construction. Textured finish deck plate. Angled 30º. 6mm cross bar in base to align rod.
Features:
BLA Code: 192562
Colour: Black
Deck Plate mm: 108×88
Cut Out mm: 54
Intrusion mm: 210
Mount Screws mm: 6 c/sSKU: 192562 -
Rod Holders
Rod Holder Flush Mount Angled White – Plastic (192560)
Rod Holder Flush Mount Angled White – Plastic (192560)
Economical one piece moulded plastic construction. Textured finish deck plate. Angled 30º. 6mm cross bar in base to align rod.
Features:
BLA Code: 192560
Colour: White
Deck Plate mm: 108×88
Cut Out mm: 54
Intrusion mm: 210
Mount Screws mm: 6 c/sSKU: 192560 -
Rod Holders
Rod Holder Flush Mount Angled with Cap – Stainless Steel (192542)
Rod Holder Flush Mount Angled with Cap – Stainless Steel (192542)
Stainless steel, flush deck mounting.PVC sealing cap, mount gasket and liner. Angled 30º. 6mm diameter pin in base of tube for rod alignment.
Features:
BLA Code: 192542
Deck Plate mm: 116×87
Intrusion mm: 205
Cut Out mm: 51
Mount Screws mm: 6 c/sSKU: 192542 -
Rod Holders
Rod Holder HD Flush Mount Angled with Cap – Stainless Steel (192545)
Rod Holder HD Flush Mount Angled with Cap – Stainless Steel (192545)
Stainless steel flush deck mounting. Raised dome top. 6mm gimbal pin for rod alignment. White PVC sealing cap and insert. Black base mount gasket supplied. 30º angled through deck mount.
Features:
BLA Code: 192545
Deck Plate mm: 106×85
Intrusion mm: 215
Cut Out mm: 51
Mount Screws mm: 6 c/sSKU: 192545 -
Rod Holders
Rod Holder MD Flush Mount Angled with Cap – Cast Stainless Steel (192549)
Rod Holder MD Flush Mount Angled with Cap – Cast Stainless Steel (192549)
Flush mounted, cast 316 grade stainless steel rod holder with black PVC liner and sealing cap. Supplied with ¾” female BSP thread in base to accept a hose tail for draining away excess water. 6mm diameter pin in base of tube for rod alignment. 30º angled through deck mount.
Features:
BLA Code: 192549
Deck Plate mm: 112×88
Intrusion mm: 210
Cut Out mm: 53
Mount Screws mm: 6 c/sSKU: 192549 -
Rod Holders
Rod Holder Oval Flush Mount Angled Black – Plastic (192567)
Rod Holder Oval Flush Mount Angled Black – Plastic (192567)
One piece moulded plastic construction with matte finished deck plate supplied with or without cover. 30º angled tube with 6mm gimbal moulding in base to keep rods aligned. 106mm x 83mm deck plate.
Features:
BLA Code: 192567
Colour: Black
Cover: No
Cut Out mm: 50
Intrusion mm: 210
Mount Screws mm: 6 c/sSKU: 192567 -
Rod Holders
Rod Holder Oval Flush Mount Angled Black with Cover – Plastic (192569)
Rod Holder Oval Flush Mount Angled Black with Cover – Plastic (192569)
One piece moulded plastic construction with matte finished deck plate supplied with or without cover. 30º angled tube with 6mm gimbal moulding in base to keep rods aligned. 106mm x 83mm deck plate.
Features:
BLA Code: 192569
Colour: Black
Cover: Yes
Cut Out mm: 50
Intrusion mm: 210
Mount Screws mm: 6 c/sSKU: 192569 -
Rod Holders
Rod Holder Oval Flush Mount Angled White no Cover – Plastic (192566)
Rod Holder Oval Flush Mount Angled White no Cover – Plastic (192566)
One piece moulded plastic construction with matte finished deck plate supplied with or without cover. 30º angled tube with 6mm gimbal moulding in base to keep rods aligned. 106mm x 83mm deck plate.
Features:
BLA Code: 192566
Colour: White
Cover: No
Cut Out mm: 50
Intrusion mm: 210
Mount Screws mm: 6 c/sSKU: 192566 -
Rod Holders
Rod Holder Oval Flush Mount Angled White with Cover – Plastic (192568)
Rod Holder Oval Flush Mount Angled White with Cover – Plastic (192568)
One piece moulded plastic construction with matte finished deck plate supplied with or without cover. 30º angled tube with 6mm gimbal moulding in base to keep rods aligned. 106mm x 83mm deck plate.
Features:
BLA Code: 192568
Colour: White
Cover: Yes
Cut Out mm: 50
Intrusion mm: 210
Mount Screws mm: 6 c/sSKU: 192568 -
Rod Holders
Rod Holder Side Mount Black – Plastic (192595)
Rod Holder Side Mount Black – Plastic (192595)
Economical one piece plastic construciton with multiple fixing side section. Mounts on any flat, near vertical surface. Available in black or white.6mm cross bar in the base to align rod.
Features:
BLA Code: 192595
Colour: Black
Width mm: 75
Height mm: 238
Depth mm: 46
Mount Screws mm: 4 r/hSKU: 192595 -
Rod Holders
Rod Holder Side Mount White – Plastic (192593)
Rod Holder Side Mount White – Plastic (192593)
Economical one piece plastic construciton with multiple fixing side section. Mounts on any flat, near vertical surface. Available in black or white.6mm cross bar in the base to align rod.
Features:
BLA Code: 192593
Colour: White
Width mm: 75
Height mm: 238
Depth mm: 46
Mount Screws mm: 4 r/hSKU: 192593 -
Rod Holders
Rod Holder Square Flush Mount Angled – Stainless Steel (192536)
Rod Holder Square Flush Mount Angled – Stainless Steel (192536)
Polished stainless steel fabricated construction. 6mm gimbal pin for rod alignment. Angled or straight through deck mount.
Features:
BLA Code: 192536
Mount: Angled
Deck Plate mm: 80×59
Cut Out mm: 44
Intrusion mm: 188
Mount Screws mm: 4 c/sSKU: 192536 -
Rod Holders
Rod Holder Square Flush Mount Angled Black – Plastic (192584)
Rod Holder Square Flush Mount Angled Black – Plastic (192584)
Economical, one piece plastic construction. Straight or angled through deck mount. Available in black or white. Mounting base measures 87mm x 60mm. 4mm countersunk mounting holes.
Features:
BLA Code: 192584
Colour: Black
Type: Angled
Tube O.D.mm: 49
Intrusion mm: 210SKU: 192584 -
Rod Holders
Rod Holder Square Flush Mount Angled White – Plastic (192583)
Rod Holder Square Flush Mount Angled White – Plastic (192583)
Economical, one piece plastic construction. Straight or angled through deck mount. Available in black or white. Mounting base measures 87mm x 60mm. 4mm countersunk mounting holes.
Features:
BLA Code: 192583
Colour: White
Type: Angled
Tube O.D.mm: 49
Intrusion mm: 210SKU: 192583 -
Rod Holders
Rod Holder Square Flush Mount Straight – Stainless Steel (192534)
Rod Holder Square Flush Mount Straight – Stainless Steel (192534)
Polished stainless steel fabricated construction. 6mm gimbal pin for rod alignment. Angled or straight through deck mount.
Features:
BLA Code: 192534
Mount: Straight
Deck Plate mm: 80×59
Cut Out mm: 44
Intrusion mm: 197
Mount Screws mm: 4 c/sSKU: 192534 -
Rod Holders
Rod Holder Square Flush Mount Straight Black – Plastic (192586)
Rod Holder Square Flush Mount Straight Black – Plastic (192586)
Economical, one piece plastic construction. Straight or angled through deck mount. Available in black or white. Mounting base measures 87mm x 60mm. 4mm countersunk mounting holes.
Features:
BLA Code: 192586
Colour: Black
Type: Straight
Tube O.D.mm: 49
Intrusion mm: 235SKU: 192586 -
Rod Holders
Rod Holder Square Flush Mount Straight White – Plastic (192585)
Rod Holder Square Flush Mount Straight White – Plastic (192585)
Economical, one piece plastic construction. Straight or angled through deck mount. Available in black or white. Mounting base measures 87mm x 60mm. 4mm countersunk mounting holes.
Features:
BLA Code: 192585
Colour: White
Type: Straight
Tube O.D.mm: 49
Intrusion mm: 235SKU: 192585 -
Rod Holders
Rod Holder Stalon Flush Mount Angled with Cap – Stainless Steel (192559)
Rod Holder Stalon Flush Mount Angled with Cap – Stainless Steel (192559)
Tough injection moulded nylon body with stainless steel cover. Sleek look with no visible fasteners. PVC sealing cap and mount gasket. 30º angled through deck mount. 6mm cross bar in base to align rod.
Features:
BLA Code: 192559
Deck Plate mm: 103×92
Intrusion mm: 235
Cut Out mm: 53
Mount Screws mm: 6 c/sSKU: 192559
