Shop
Showing 2311–2340 of 3735 results
-
Lighting, Navigation Lights
OceanLED Underwater Lights – X-Series
OceanLED Underwater Lights – X-Series
The X-Series is a combination of the current OceanLED XT and XP product ranges. It consists of five lights in three sizes (four, eight or sixteen LED’s) in either a choice of Ultra White, Midnight Blue or RGBW (X8 and X16 only). The X-Series outputs up to 4,500 fixture lumens and benefits from bespoke optics which focus the beam and increase penetration in the water illuminating a larger area.
The new X8 and X16 Colours now combine the standard colour change and the DMX control into the one light. You can toggle between the RGBW colours with a standard DC switch, or for full control and customisation, add an OceanDMX App controller kit and download the free iOS/Android App for smartphones or tablets. The easy to use App allows you to choose from an almost limitless number of colours and pick from a selection of modes like Single colour, Cycle, Strobe, Music or Wave.
The fish-strobe mode gives an exceptionally bright, randomised strobing effect that is proven to catch more bait and attract more fish.
Installation is simple with only a small 12.5mm hole needed to run the cable through the hull and four screws to fix it in place. Maintenance is virtually zero thanks to the special Tritonium lens coating with just a quick wipe removing any marine growth.
Features
• 60° Beam Angle – A wide-angled, focused beam lights up a large area of the water
• Compact and simple design – Made from a chemically resistant optical polymer with a built in driver, there is a lot packed into this compact light
• Simple to install – Installation needs only a small, 12.5mm hole in the hull to feed the cable through and 4 screws in place. No bonding required
• Easy to clean – Thanks to its Tritonium coating, a simple wipe of the lens removes any underwater growth saving hours of scrubbing each time you use it
• Fish-Strobe Mode – Exceptionally bright, randomised strobing of the light is proven to attract more fish and catch more bait
• Active Thermal Control – ATC prevents overheating. In the event of overheating the ATC system will reduce the LED power level in order to protect the LEDs, or in extreme cases, turn o the fixture completely.
• Colours Control – Colours models are compatible with OceanDMX for full control, interactivity and colour customisation. Alternatively, cycle smoothly between red, green, blue and white with a standard DC switchBLA CODEDESCRIPTIONLUMENSFIXTURESVOLTSCURRENT 12VCURRENT 24VAPPROX. LIGHT PENETRATION(AVG. WATER QUALITY)APPROX. LIGHT PENETRATION(PERFECT WATER QUALITY)DRIVER TYPE125331 
X4 Midnight Blue 1450 1150 9-32V 0.8A 0.4A 6m (20ft) up to 13m + (40ft) Internal 125332 
X8 Ultra White 2900 2300 9-32V 1.65A 0.75A 8m (26ft) Up to 21m + (72ft) Internal 125333 
X8 Midnight Blue 2900 2300 9-32V 1.65A 0.75A 8m (26ft) Up to 21m + (72ft) Internal 125334 
X8 Colours 2900 2300 9-32V 1.65A 0.75A 8m (26ft) Up to 21m + (72ft) Internal 125335 
X16 Ultra White 5800 4500 9-32V 3.2A 1.5A 12m (40ft) Up to 30m + (100ft) Internal 125336 
X16 Midnight Blue 5800 4500 9-32V 3.2A 1.5A 12m (40ft) Up to 30m + (100ft) Internal 125337 
X16 Colours 5800 4500 9-32V 3.2A 1.5A 12m (40ft) Up to 30m + (100ft) Internal *(Amperage draw for Colours models vary by the colour selected, this is the maximum)
Accessories
125362 Bezel 316 S/Steel Suit Xt/Xp4
125364 Bezel 316 S/Steel Suit Xt/Xp8
125366 Bezel 316 S/Steel Suit Xt/Xp16
123420 Oceanled Dmx Mobile App Controller
123421 Dmx Junction Box
123422 Dmx App Cable 2 Metre
123423 X-Series Dmx App Controller Kit
123424 Pro Series Dmx App Controller Kit
123425 Dmx Control Cable 5M
123426 Dmx Control Cable 10M
123427 Dmx Control Cable 15M
123428 Dmx Control Cable 20M
123429 Dmx Control Cable 25MPlease Note: Fixture Lumens rating is a measurement of total light output from a finished lighting fixture. This measurement can only be obtained from either a Goniophotometer or an integrating sphere. Fixture Lumens is the most reliable, professional measurement of light output. OceanLED has heavily invested in these measurement apparatus and has had all its data verified by the Lighting Association of Great Britain.
SKU: 125331, 125332, 125333, 125334, 125335, 125336, 125337 -
Lighting, Navigation Lights
OceanLED Underwater Mast Lights – M6 Gen 2
OceanLED Underwater Mast Lights – M6 Gen 2
The new M6 Gen2 Mast Series light from OceanLED is 50% brighter than its previous model with an improved design. The narrow beam angle helps focus the powerful LEDs, enhancing the natural beauty of your vessel, making it perfect for illuminating your rigging. Suitable for aluminium, steel and composite rigs on all sizes of boats rD47anging from sportfishing to larger yachts. Easy to install, sturdy, weatherproof and exceptionally easy to maintain. Ultra low power draw, reverse polarity protection.
Features
• Always find your boat when moored
• Eliminate poorly lit areas
• Enhance the lines of your boat at night
• Circular beam gives large deck footprint
• 10 meter cable for running down masts
• Same footprint as earlier models
• Chemically resistant polymerBLA CODECOLOURVOLTSAMPS 12/24FIXTURE LUMENSLUMENSLENGTH MMWIDTH MM125351 
Ultra white 9-32 0.45 660 970 160.3 21.5 125352 
Warm white 9-32 0.45 660 970 160.3 21.5 SKU: 125351, 125352 -
Bimini Tops and T-Tops, Biminis, Canopies and Boat Covers, Easter
OCEANSOUTH 2 Bow Bimini Kits – Navy Blue
-23%
Bimini Tops and T-Tops, Biminis, Canopies and Boat Covers, EasterOCEANSOUTH 2 Bow Bimini Kits – Navy Blue
OCEANSOUTH 2 Bow Bimini Kits – Navy Blue
The Oceansouth 2 Bow Bimini is a robust and high-quality bimini top designed for smaller open boats and inflatable boats. With its trim design and 25mm anodized aluminum tubing, this bimini provides reliable shade and protection for your boating adventures. It’s well-suited for both open boats and inflatable boats, offering versatility in its application.
Constructed from high-tech polyester ATLAS canvas with a weight of 310 g/m2, this bimini top is UV and weather-resistant, ensuring durability and color fastness even under challenging marine conditions. The marine-grade nylon fittings add to its longevity. The package includes everything you need, such as the integrated storage boot, aluminum framework, fabric, heavy-duty webbing straps, crossbars, and components, making installation and setup a breeze. With a maximum speed rating of 45 knots, the Oceansouth 2 Bow Bimini combines functionality and performance, making it a valuable addition to your boat.
- Suitable for Open & Inflatable Boats
- Ø25mm Anodized Aluminium snap lock frame
- High Tech Polyester ATLAS Canvas 310 g/m2
- UV & weather resistant, colour fastness to light grade 6-7
- Marine grade Nylon fittings
- Supplied with Integrated Storage Boot, Aluminium framework, Fabric, Heavy duty webbing straps, Crossbars and components.
- Max. Speed Rating 45 knots
Bimini Top Dimensions
Fabric Details
SKU: MA 060-1B, MA 060-2B, MA 060-3B -
Bimini Tops and T-Tops, Biminis, Canopies and Boat Covers
OCEANSOUTH 3 Bow Bimini Kits
OCEANSOUTH 3 Bow Bimini Kits
The Oceansouth 3 Bow Bimini Top is a versatile and durable shade solution for your boat. With its Ø25mm snap lock frame, it provides a sturdy and reliable structure to shield you from the sun and weather. The high-tech polyester ATLAS canvas, weighing 310 g/m2, offers excellent UV and weather resistance, ensuring long-lasting performance even in challenging marine conditions.
One notable feature of this bimini top is its flexibility. If needed, it can be shortened to a height of 1.1m, allowing you to customize it to your specific preferences. It also boasts exceptional color fastness to light, rated grade 6-7, ensuring that it maintains its vibrant appearance over time. The package includes an integrated storage boot, fabric, heavy-duty webbing straps, and components for easy installation. With a maximum speed rating of 45 knots, the Oceansouth 3 Bow Bimini Top combines functionality, adaptability, and performance, making it an ideal addition to your boat for sun protection and comfort.
- Ø25mm Snap Lock Frame
- High Tech Polyester ATLAS Canvas 310 g/m2
- If needed, Bimini can be shortened to 1.1m Height
- UV & weather resistant, colour fastness to light grade 6-7
- Supplied with Integrated Storage Boot, Fabric, Heavy duty webbing straps, and components.
- Max. Speed Rating 45 knots
MOUNTING WIDTH CANOPY WIDTH ORDER CODE 1.5m – 1.7m 1.4m MA 062-1 1.7m – 1.9m 1.6m MA 062-2 1.9m – 2.1m 1.8m MA 062-3 Fabric Details
Weight 310g/m² Material 100% High Tech Polyester Water Column ≥ 150 mbar (1500 mm) Light & Weather Fastness Note 6-7 Tensile Strength ≈ 2200 N¹ | 1400 N² Elongation ≈ 40 %¹ | 30 %² Colour Fastness to rubbing Note 4-5³ | Note 44 Chlorine Resistant Note 4-5 Water Repellency Note 100 Oil Repellency Note 4 Coating Polyurethan [PU] UV Protection Factor UPF 50+ (measured > UPF 80) Instructions
SKU: MA 062-1B, MA 062-1BK, MA 062-2B, MA 062-2BK, MA 062-3B, MA 062-3BK -
Bimini Tops and T-Tops, Biminis, Canopies and Boat Covers
OCEANSOUTH 3 Bow Classic Bimini Top – Stainless Steel
Bimini Tops and T-Tops, Biminis, Canopies and Boat CoversOCEANSOUTH 3 Bow Classic Bimini Top – Stainless Steel
OCEANSOUTH 3 Bow Classic Bimini Top – Stainless Steel
- Exceptional durability and quality
- 3 Bow Bimini Top Stainless Steel 183cm canopy length (front to back) and 130cm height (which you can trim down to 110cm if required)
- Water-resistant breathable high-tech ATLAS Marine Grade Fabric 310 g/m2
- UV & weather-resistant color fastness to light grade 6-7
- Resilience against mould and mildew
- Ø25mm 316 stainless steel frame, ensuring strength and dependability
- Nylon strap tie-downs at both front and back (solid rear support poles can be purchased separately)
- Marine-grade fittings
- Travels comfortably on the water at 40 knots
- A wide selection of canopy colors and mounting widths to choose from
Fabric Details
Weight 310g/m² Material 100% High Tech Polyester Water Column ≥ 150 mbar (1500 mm) Light & Weather Fastness Note 6-7 Tensile Strength ≈ 2200 N¹ | 1400 N² Elongation ≈ 40 %¹ | 30 %² Colour Fastness to rubbing Note 4-5³ | Note 44 Chlorine Resistant Note 4-5 Water Repellency Note 100 Oil Repellency Note 4 Coating Polyurethan [PU] UV Protection Factor UPF 50+ (measured > UPF 80) Instructions
SKU: MA 262-1B, MA 262-1PB, MA 262-1BK, MA 262-1G, MA 262-1DG, MA 262-1S, MA 262-1M, MA 262-1W, MA 262-2B, MA 262-2PB, MA 262-2BK, MA 262-2G, MA 262-2DG, MA 262-2S, MA 262-2M, MA 262-2W, MA 262-3B, MA 262-3PB, MA 262-3BK, MA 262-3G, MA 262-3DG, MA 262-3S, MA 262-3M, MA 262-3W -
Bimini Tops and T-Tops, Biminis, Canopies and Boat Covers
OCEANSOUTH 3 Bow Whitewater Bimini Top – Aluminium
Bimini Tops and T-Tops, Biminis, Canopies and Boat CoversOCEANSOUTH 3 Bow Whitewater Bimini Top – Aluminium
OCEANSOUTH 3 Bow Whitewater Bimini Top – Aluminium
- Exceptional durability and quality
- 3 Bow Whitewater Bimini canopy length 1.3m (front to back) and 1.2m (in height, which can be trimmed down to 0.9m if required)
- Water-resistant & breathable high-tech ATLAS Marine Grade Fabric (310 g/m2)
- UV & weather-resistant colour fastness to light grade 6-7
- Resilience against mould and mildew
- Ø25mm anodised aluminium frame, ensuring strength and dependability.
- Nylon strap tie-downs at the front and solid angled support poles at the rear
- Marine-grade fittings
- Choose with or without the 6 Rod capacity Rocket Launcher
- Travels comfortably on the water at 40 knots
- A wide selection of canopy colours and mounting widths to choose from
Fabric Details
Weight 310g/m² Material 100% High Tech Polyester Water Column ≥ 150 mbar (1500 mm) Light & Weather Fastness Note 6-7 Tensile Strength ≈ 2200 N¹ | 1400 N² Elongation ≈ 40 %¹ | 30 %² Colour Fastness to rubbing Note 4-5³ | Note 44 Chlorine Resistant Note 4-5 Water Repellency Note 100 Oil Repellency Note 4 Coating Polyurethan [PU] UV Protection Factor UPF 50+ (measured > UPF 80) Instructions
SKU: MA 090-0B, MA 090-0BK, MA 090-0G, MA 090-0S, MA 090-0M, MA 090-1B, MA 090-1BK, MA 090-1G, MA 090-1S, MA 090-1M, MA 090-2B, MA 090-2BK, MA 090-2G, MA 090-2S, MA 090-2M, MA 090-3B, MA 090-3BK, MA 090-3G, MA 090-3S, MA 090-3M, MA 090-4B, MA 090-4BK, MA 090-4G, MA 090-4S, MA 090-4M, MA 093-0B, MA 093-0BK, MA 093-0G, MA 093-0S, MA 093-0M, MA 093-1B, MA 093-1BK, MA 093-1G, MA 093-1S, MA 093-1M, MA 093-2B, MA 093-2BK, MA 093-2G, MA 093-2S, MA 093-2M, MA 093-3B, MA 093-3BK, MA 093-3G, MA 093-3S, MA 093-3M, MA 093-4B, MA 093-4BK, MA 093-4G, MA 093-4S, MA 093-4M -
Boating Accessories, Rod Holders
OCEANSOUTH 3 Rod Rack / 4 Rod Rack
OCEANSOUTH 3 Rod Rack / 4 Rod Rack – Rod Racks Stainless Steel
The Oceansouth 4 Way Rod Combing Rack is the ultimate solution for organizing and storing fishing rods. Made from durable 316 stainless steel, this rod holder storage system is built to withstand the harsh marine environment and provide long-lasting performance.
The 316 stainless steel construction not only enhances the rack’s durability but also provides excellent corrosion resistance, making it ideal for saltwater environments. This ensures that your valuable fishing rods are protected from the corrosive effects of saltwater, ensuring their longevity and maintaining their performance over time.
Installation of the 4 Way or 3 Way rod Combing Rack is straightforward, thanks to its versatile design. It can be easily mounted on a variety of surfaces, including gunwales, transoms, or even on the deck of your boat.
Whether you’re a professional angler or a recreational fishing enthusiast, the Oceansouth 4 Way Rod Combing Rack offers a practical and reliable storage solution for your fishing rods. With its sturdy construction, convenient design and excellent resistance to corrosion, this stainless steel rod holder storage system is a must-have accessory for any fishing adventure. Keep your rods organized, protected and ready for action with the Oceansouth 4 Way Rod Combing Rack.
- Full length Polypropylene liner, protects rod handles
- Solid construction – no moving parts
- Gimble pin rod stop
- Rounded top and bottom edges
- Racks can be teamed together for multiply rod storage
- Convenient storage for Rods on your boat, patio or garage
- Two mount points
DESCRIPTION ORDER CODE 
Rod rack of 3 MA 101-1 Rod rack of 4 MA 101-2 SKU: MA 101-1, MA 101-2 -
Bimini Tops and T-Tops, Biminis, Canopies and Boat Covers
OCEANSOUTH 4 Bow Bimini Kits
OCEANSOUTH 4 Bow Bimini Kits
The Oceansouth 4 Bow Bimini Top is a top-of-the-line shading solution for your boat, designed to provide maximum protection and comfort on the water. Its robust Ø25mm snap lock frame ensures a secure and reliable structure to shield you from the elements. Crafted from high-tech polyester ATLAS canvas with a weight of 310 g/m2, this bimini top boasts exceptional UV and weather resistance, making it a durable choice for extended outdoor use. It is built to withstand the harshest marine conditions, ensuring its longevity and colorfastness with a rating of grade 6-7 for protection against light-induced fading.
One of the standout features of this bimini top is its adaptability. If needed, it can be easily shortened to a height of 1.1m, allowing you to customize it to your specific preferences and needs. The package includes an integrated storage boot, fabric, heavy-duty webbing straps, and components, making installation straightforward and hassle-free. With a maximum speed rating of 45 knots, the Oceansouth 4 Bow Bimini Top combines functionality, versatility, and performance, making it an excellent addition to your boat for superior sun protection and comfort during your boating adventures.
- Ø25mm Snap Lock Frame
- High Tech Polyester ATLAS Canvas 310 g/m2
- If needed, Bimini can be shortened to 1.1m Height
- UV & weather resistant, colour fastness to light grade 6-7
- Supplied with Integrated Storage Boot, Fabric, Heavy duty webbing straps and components.
- Max. Speed Rating 45 knots
SKU: MA 063-1B, MA 063-1BK, MA 063-2B, MA 063-2BK, MA 063-3B, MA 063-3BK, MA 063-4B, MA 063-4BK -
Bimini Tops and T-Tops, Biminis, Canopies and Boat Covers
OCEANSOUTH 4 Bow Classic Bimini Top – Stainless Steel
Bimini Tops and T-Tops, Biminis, Canopies and Boat CoversOCEANSOUTH 4 Bow Classic Bimini Top – Stainless Steel
OCEANSOUTH 4 Bow Classic Bimini Top – Stainless Steel
- Exceptional durability and quality
- 3 Bow Bimini Top Stainless Steel 220cm canopy length (front to back) and 125cm height (which you can trim down to 110cm if required)
- Water-resistant breathable high-tech ATLAS Marine Grade Fabric 310 g/m2
- UV & weather-resistant color fastness to light grade 6-7
- Resilience against mould and mildew
- Ø25mm 316 stainless steel frame, ensuring strength and dependability
- Nylon strap tie-downs at both front and back (solid rear support poles can be purchased separately)
- Marine-grade fittings
- Travels comfortably on the water at 40 knots
- A wide selection of canopy colors and mounting widths to choose from
Fabric Details
Weight 310g/m² Material 100% High Tech Polyester Water Column ≥ 150 mbar (1500 mm) Light & Weather Fastness Note 6-7 Tensile Strength ≈ 2200 N¹ | 1400 N² Elongation ≈ 40 %¹ | 30 %² Colour Fastness to rubbing Note 4-5³ | Note 44 Chlorine Resistant Note 4-5 Water Repellency Note 100 Oil Repellency Note 4 Coating Polyurethan [PU] UV Protection Factor UPF 50+ (measured > UPF 80) Instructions
SKU: MA 263-1B, MA 263-1PB, MA 263-1BK, MA 263-1G, MA 263-1DG, MA 263-1S, MA 263-1M, MA 263-1W, MA 263-2B, MA 263-2PB, MA 263-2BK, MA 263-2G, MA 263-2DG, MA 263-2S, MA 263-2M, MA 263-2W, MA 263-3B, MA 263-3PB, MA 263-3BK, MA 263-3G, MA 263-3DG, MA 263-3S, MA 263-3M, MA 263-3W, MA 263-4B, MA 263-4PB, MA 263-4BK, MA 263-4G, MA 263-4DG, MA 263-4S, MA 263-4M, MA 263-4W -
Bimini Tops and T-Tops, Biminis, Canopies and Boat Covers
OCEANSOUTH Bimini Extension Kit – Bimini Top Extension
-4%
Bimini Tops and T-Tops, Biminis, Canopies and Boat CoversOCEANSOUTH Bimini Extension Kit – Bimini Top Extension
OCEANSOUTH Bimini Extension Kit – Bimini Top Extension
The Oceansouth Bimini Top Extension with Adjustable Aluminum Poles is a practical and durable accessory designed to expand the coverage and comfort of your boat’s bimini top. Crafted from high-quality materials for durability and resistance to the marine environment, it seamlessly integrates with your existing bimini top, enhancing your boat’s aesthetics.
The standout feature is the adjustable aluminum poles, allowing you to customize the extension’s height and angle for tailored shade and coverage. Whether you want protection from the sun, light rain, or a cozy relaxation space, these adjustable poles provide flexibility. With its durable construction, adjustable features, and easy installation, the Oceansouth Bimini Top Extension is an essential addition for boat owners looking to elevate their on-water experience by providing extended shade and protection.
- Supplied with 2 heavy duty Aluminum telescopic poles Ø32mm.
(1.3m to 2m Length) that fit securely into rod holder mounts. - Height can be adjusted for comfortable seating or standing.
- Use at anchor or motoring up to 20 knots.
- Supplied with 2 heavy duty Aluminum telescopic poles Ø32mm.(1.3m to 2m Length) that fit securely into rod holder mounts.
- Height can be adjusted for comfortable seating or standing.
- Use at anchor or motoring up to 20 knots.
LENGTH / A WIDTH / B C ORDER CODE 1.7m (5.5ft) 1.7m (5.5ft) 1.4m (4.5ft) MA 046-1 1.7m (5.5ft) 2.1m (6.8ft) 1.8m (5.9ft) MA 046-2 
Fabric Details
SKU: MA 046-1, MA 046-1B, MA 046-1BK, MA 046-2, MA 046-2B MA 046-2BK - Supplied with 2 heavy duty Aluminum telescopic poles Ø32mm.
-
Seat Cushions, Seating
OCEANSOUTH Boat Bench Cushions with Side Pockets
OCEANSOUTH Boat Bench Cushions with Side Pockets
SUITABLE FOR BOAT BENCH |REMOVABLE |DENSE THICK FOAM
The Oceansouth Boat Bench Seat Cushion with Dense 50mm Foam and Side Pockets is a comfortable and functional accessory designed to enhance your boating experience. Crafted with a focus on comfort and practicality, it offers cozy seating for boat bench seats and convenient side pockets for storage.
Crafted from high-quality materials, this cushion features dense 50mm foam for exceptional comfort and support during long periods of use. The added benefit of side pockets allows you to keep small items like sunglasses, sunscreen, snacks, or fishing gear within easy reach, helping you maintain an organized and clutter-free boat. Whether you’re a casual cruiser, an angler, or simply love spending time on the water, this cushion is a valuable addition to your boat’s setup, offering comfort, storage convenience, and durability to enhance your overall boating experience. Expect comfortable seating and a tidy boat every time you head out on the water with this cushion.
- Side Pockets.
- Press stud fittings.
- Removable when not in use.
- Dense 50mm thick foam.
- UV resistant fabric by OMNOVA.
CODE WIDTH(mm) LENGTH(mm) MA 710-1 300 600 MA 710-2 400 600 MA 710-3 300 1200 MA 710-4 400 1200 MA 710-5 400 1500 Fabric
SKU: MA 710-1, MA 710-2, MA 710-3, MA 710-4, MA 710-5 -
Biminis, Canopies and Boat Covers, Boat Covers
OCEANSOUTH Bowrider Trailerable Boat Covers
OCEANSOUTH Bowrider Trailerable Boat Covers
The Oceansouth Bowrider Boat Cover is expertly designed to offer superior protection for bowrider type boats, making it the perfect choice for both trailering and long-term storage. This cover is engineered to fit boats with bow rails up to 150mm in height and windscreens up to 600mm in height, ensuring a snug and secure fit that shields your valuable vessel from the elements.
Constructed using the highest quality 280gsm Atlas Marine Fabrics, this cover is built to withstand the toughest marine conditions. Its durability is further exemplified by flat double lock seam stitching and the use of the highest quality UV threads, providing an extended life expectancy even under the most challenging sun exposure. The inclusion of a 6mm braided rope encased in the hem, along with a rope ratchet system, makes gathering and tightening the cover a breeze, ensuring a secure fit.
To promote proper air circulation and prevent moisture buildup, this cover features strategically placed air vents. When not in use, the Oceansouth Bowrider Boat Cover can be conveniently stored in the provided storage bag. For added convenience and peace of mind, a full set of Rope Ends, Rope Cleats, and Tie-down Rope is included, allowing you to secure the cover effectively and safeguard your bowrider boat investment. With its combination of tailored fit, durable construction, and practical features, this cover is a must-have accessory for bowrider boat owners looking to protect their vessel.
- Design to fit bowrider type boats
- Ideal for trailering and long-term storage.
- Fits boats with bow rails up to 150mm height, and windscreens up to 600mm height.
- The cover is constructed of the highest quality 280gsm Atlas Marine Fabrics.
- Flat double lock seam stitching and highest quality UV threads ensure an extended life expectancy.
- 6mm breaded rope encased in hem, rope ratchet for easy gathering and tighten down the cover.
- Air vent provide air circulation.
- Storage bag when not in used
- A full set of Rope Ends, Rope Cleats and Tie-down Rope.
Overall Fabric Measurements
BOAT LENGTH (W) FABRIC WIDTH (L) FABRIC LENGTH ORDER CODE 4.7m – 5.0m 3190mm 5660mm MA 200-9 5.0m – 5.3m 3360mm 5960mm MA 200-10 5.3m – 5.6m 3360mm 6300mm MA 200-11 5.6m – 5.9m 3400mm 6600mm MA 200-12 5.9m – 6.3m 3440mm 7040mm MA 200-13 6.3m – 6.7m 3440mm 7440mm MA 200-14 Fabric Details
Weight 280 g/m2 Material 100% High Tech Polyester Water Column ≥ 150 mbar (1500 mm) Light & Weather Fastness Note 6-7 Tensile Strength ≈ 2200 N¹ | 1400 N² Elongation ≈ 40 %¹ | 30 %² Colour Fastness to rubbing Note 4-5³ | Note 44 Chlorine Resistant Note 4-5 Water Repellency Note 100 Oil Repellency Note 4 Coating Polyurethan [PU] UV Protection Factor UPF 50+
(measured value > UPF 80)SKU: MA 200-9, MA 200-9BK, MA 200-10, MA 200-10BK, MA 200-11, MA 200-11BK, MA 200-12, MA 200-12BK, MA 200-13, MA 200-13BK, MA 200-14, MA 200-14BK -
Biminis, Canopies and Boat Covers, Boat Covers
OCEANSOUTH Cabin Cruiser Cover 4.7 – 5.0m
OCEANSOUTH Cabin Cruiser Cover 4.7 – 5.0m
Trailerable high quality cover. Designed to fit cabin type boats, suitable for boats with bow rails up to 400mm height and cabin up to 900 mm height
Genuine Professional Quality, for the serious Boater. An excellent quality boat cover which will give your boat protection through the seasons.
- Designed to fit cabin type boats
- Ideal for trailering and long-term storage.
- Fits boats with bow rails up to 400mm height, and cabins up to 600mm height.
- The cover is constructed of the highest quality 280gsm Atlas marine fabrics.
- Flat double lock seam stitching and highest quality UV threads ensure an extended life expectancy.
- 6mm breaded rope encased in hem, rope ratchet for easy gathering and tighten down the cover.
- Air vent provide air circulation.
- Storage bag when not in used
- A full set of Rope Ends, Rope Cleats and Tie-down Rope.
BOAT LENGTH
MAX. BEAM WIDTH
ORDER CODE 4.7m – 5.0m 2.25m MA 201-9 5.0m – 5.3m 2.4m MA 201-10 5.3m – 5.6m 2.4m MA 201-11 5.6m – 5.9m 2.45m MA 201-12 5.9m – 6.3m 2.5m MA 201-13 6.3m – 6.7m 2.5m MA 201-14 SKU: MA 201-9 -
Biminis, Canopies and Boat Covers, Boat Covers
OCEANSOUTH Cabin Cruiser Cover 5.0 – 5.3m
OCEANSOUTH Cabin Cruiser Cover 5.0 – 5.3m
Trailerable high quality cover. Designed to fit cabin type boats, suitable for boats with bow rails up to 400mm height and cabin up to 900 mm height
Genuine Professional Quality, for the serious Boater. An excellent quality boat cover which will give your boat protection through the seasons.
- Designed to fit cabin type boats
- Ideal for trailering and long-term storage.
- Fits boats with bow rails up to 400mm height, and cabins up to 600mm height.
- The cover is constructed of the highest quality 280gsm Atlas marine fabrics.
- Flat double lock seam stitching and highest quality UV threads ensure an extended life expectancy.
- 6mm breaded rope encased in hem, rope ratchet for easy gathering and tighten down the cover.
- Air vent provide air circulation.
- Storage bag when not in used
- A full set of Rope Ends, Rope Cleats and Tie-down Rope.
BOAT LENGTH
MAX. BEAM WIDTH
ORDER CODE 4.7m – 5.0m 2.25m MA 201-9 5.0m – 5.3m 2.4m MA 201-10 5.3m – 5.6m 2.4m MA 201-11 5.6m – 5.9m 2.45m MA 201-12 5.9m – 6.3m 2.5m MA 201-13 6.3m – 6.7m 2.5m MA 201-14 SKU: MA 201-10 -
Biminis, Canopies and Boat Covers, Boat Covers
OCEANSOUTH Cabin Cruiser Cover 5.3 – 5.6m
OCEANSOUTH Cabin Cruiser Cover 5.3 – 5.6m
Trailerable high quality cover. Designed to fit cabin type boats, suitable for boats with bow rails up to 400mm height and cabin up to 900 mm height
Genuine Professional Quality, for the serious Boater. An excellent quality boat cover which will give your boat protection through the seasons.
- Designed to fit cabin type boats
- Ideal for trailering and long-term storage.
- Fits boats with bow rails up to 400mm height, and cabins up to 600mm height.
- The cover is constructed of the highest quality 280gsm Atlas marine fabrics.
- Flat double lock seam stitching and highest quality UV threads ensure an extended life expectancy.
- 6mm breaded rope encased in hem, rope ratchet for easy gathering and tighten down the cover.
- Air vent provide air circulation.
- Storage bag when not in used
- A full set of Rope Ends, Rope Cleats and Tie-down Rope.
BOAT LENGTH
MAX. BEAM WIDTH
ORDER CODE 4.7m – 5.0m 2.25m MA 201-9 5.0m – 5.3m 2.4m MA 201-10 5.3m – 5.6m 2.4m MA 201-11 5.6m – 5.9m 2.45m MA 201-12 5.9m – 6.3m 2.5m MA 201-13 6.3m – 6.7m 2.5m MA 201-14 SKU: MA 201-11 -
Biminis, Canopies and Boat Covers, Boat Covers
OCEANSOUTH Cabin Cruiser Cover 5.6 – 5.9m
OCEANSOUTH Cabin Cruiser Cover 5.6 – 5.9m
Trailerable high quality cover. Designed to fit cabin type boats, suitable for boats with bow rails up to 400mm height and cabin up to 900 mm height
Genuine Professional Quality, for the serious Boater. An excellent quality boat cover which will give your boat protection through the seasons.
- Designed to fit cabin type boats
- Ideal for trailering and long-term storage.
- Fits boats with bow rails up to 400mm height, and cabins up to 600mm height.
- The cover is constructed of the highest quality 280gsm Atlas marine fabrics.
- Flat double lock seam stitching and highest quality UV threads ensure an extended life expectancy.
- 6mm breaded rope encased in hem, rope ratchet for easy gathering and tighten down the cover.
- Air vent provide air circulation.
- Storage bag when not in used
- A full set of Rope Ends, Rope Cleats and Tie-down Rope.
BOAT LENGTH
MAX. BEAM WIDTH
ORDER CODE 4.7m – 5.0m 2.25m MA 201-9 5.0m – 5.3m 2.4m MA 201-10 5.3m – 5.6m 2.4m MA 201-11 5.6m – 5.9m 2.45m MA 201-12 5.9m – 6.3m 2.5m MA 201-13 6.3m – 6.7m 2.5m MA 201-14 SKU: MA 201-12 -
Biminis, Canopies and Boat Covers, Boat Covers
OCEANSOUTH Cabin Cruiser Cover 5.9 – 6.3m
OCEANSOUTH Cabin Cruiser Cover 5.9 – 6.3m
Trailerable high quality cover. Designed to fit cabin type boats, suitable for boats with bow rails up to 400mm height and cabin up to 900 mm height
Genuine Professional Quality, for the serious Boater. An excellent quality boat cover which will give your boat protection through the seasons.
- Designed to fit cabin type boats
- Ideal for trailering and long-term storage.
- Fits boats with bow rails up to 400mm height, and cabins up to 600mm height.
- The cover is constructed of the highest quality 280gsm Atlas marine fabrics.
- Flat double lock seam stitching and highest quality UV threads ensure an extended life expectancy.
- 6mm breaded rope encased in hem, rope ratchet for easy gathering and tighten down the cover.
- Air vent provide air circulation.
- Storage bag when not in used
- A full set of Rope Ends, Rope Cleats and Tie-down Rope.
BOAT LENGTH
MAX. BEAM WIDTH
ORDER CODE 4.7m – 5.0m 2.25m MA 201-9 5.0m – 5.3m 2.4m MA 201-10 5.3m – 5.6m 2.4m MA 201-11 5.6m – 5.9m 2.45m MA 201-12 5.9m – 6.3m 2.5m MA 201-13 6.3m – 6.7m 2.5m MA 201-14 SKU: MA 201-13 -
Biminis, Canopies and Boat Covers, Boat Covers
OCEANSOUTH Cabin Cruiser Cover 6.3 – 6.7m
OCEANSOUTH Cabin Cruiser Cover 6.3 – 6.7m
Trailerable high quality cover. Designed to fit cabin type boats, suitable for boats with bow rails up to 400mm height and cabin up to 900 mm height
Genuine Professional Quality, for the serious Boater. An excellent quality boat cover which will give your boat protection through the seasons.
- Designed to fit cabin type boats
- Ideal for trailering and long-term storage.
- Fits boats with bow rails up to 400mm height, and cabins up to 600mm height.
- The cover is constructed of the highest quality 280gsm Atlas marine fabrics.
- Flat double lock seam stitching and highest quality UV threads ensure an extended life expectancy.
- 6mm breaded rope encased in hem, rope ratchet for easy gathering and tighten down the cover.
- Air vent provide air circulation.
- Storage bag when not in used
- A full set of Rope Ends, Rope Cleats and Tie-down Rope.
BOAT LENGTH
MAX. BEAM WIDTH
ORDER CODE 4.7m – 5.0m 2.25m MA 201-9 5.0m – 5.3m 2.4m MA 201-10 5.3m – 5.6m 2.4m MA 201-11 5.6m – 5.9m 2.45m MA 201-12 5.9m – 6.3m 2.5m MA 201-13 6.3m – 6.7m 2.5m MA 201-14 SKU: MA 201-14 -
Biminis, Canopies and Boat Covers, Boat Covers
OCEANSOUTH Centre Console Cover 4.7 – 5.0m
OCEANSOUTH Centre Console Cover 4.7 – 5.0m
Trailerable high quality cover. Designed to fit Centre Console type boats, suitable for boats with bow rails up to 350mm height and console (from Gunwale) up to 800mm height. Genuine Professional Quality, for the serious Boater. An excellent quality boat cover which will give your boat protection through the seasons.
- Designed to fit Centre Console type boats
- Ideal for trailering and long-term storage.
- Fits boats with bow rails up to 350mm height and console (from Gunwale) up to 800mm height.
- The cover is constructed of the highest quality 280gsm Atlas marine fabrics.
- Flat double lock seam stitching and highest quality UV threads ensure an extended life expectancy.
- 6mm breaded rope encased in hem, rope ratchet for easy gathering and tighten down the cover.
- Air vent provide air circulation.
- Storage bag when not in used
- A full set of Rope Ends, Rope Cleats and Tie-down Rope.
BOAT LENGTH
MAX. BEAM WIDTH
ORDER CODE 4.7m – 5.0m 2.25m MA 204-9 5.0m – 5.3m 2.4m MA 204-10 5.3m – 5.6m 2.4m MA 204-11 5.6m – 5.9m 2.45m MA 204-12 5.9m – 6.3m 2.50m MA 204-13 6.3m – 6.7m 2.50m MA 204-14 SKU: MA 204-9 -
Biminis, Canopies and Boat Covers, Boat Covers
OCEANSOUTH Centre Console Cover 5.0 – 5.3m
OCEANSOUTH Centre Console Cover 5.0 – 5.3m
Trailerable high quality cover. Designed to fit Centre Console type boats, suitable for boats with bow rails up to 350mm height and console (from Gunwale) up to 800mm height. Genuine Professional Quality, for the serious Boater. An excellent quality boat cover which will give your boat protection through the seasons.
- Designed to fit Centre Console type boats
- Ideal for trailering and long-term storage.
- Fits boats with bow rails up to 350mm height and console (from Gunwale) up to 800mm height.
- The cover is constructed of the highest quality 280gsm Atlas marine fabrics.
- Flat double lock seam stitching and highest quality UV threads ensure an extended life expectancy.
- 6mm breaded rope encased in hem, rope ratchet for easy gathering and tighten down the cover.
- Air vent provide air circulation.
- Storage bag when not in used
- A full set of Rope Ends, Rope Cleats and Tie-down Rope.
BOAT LENGTH
MAX. BEAM WIDTH
ORDER CODE 4.7m – 5.0m 2.25m MA 204-9 5.0m – 5.3m 2.4m MA 204-10 5.3m – 5.6m 2.4m MA 204-11 5.6m – 5.9m 2.45m MA 204-12 5.9m – 6.3m 2.50m MA 204-13 6.3m – 6.7m 2.50m MA 204-14 SKU: MA 204-10 -
Biminis, Canopies and Boat Covers, Boat Covers
OCEANSOUTH Centre Console Cover 5.3 – 5.6m
OCEANSOUTH Centre Console Cover 5.3 – 5.6m
Trailerable high quality cover. Designed to fit Centre Console type boats, suitable for boats with bow rails up to 350mm height and console (from Gunwale) up to 800mm height. Genuine Professional Quality, for the serious Boater. An excellent quality boat cover which will give your boat protection through the seasons.
- Designed to fit Centre Console type boats
- Ideal for trailering and long-term storage.
- Fits boats with bow rails up to 350mm height and console (from Gunwale) up to 800mm height.
- The cover is constructed of the highest quality 280gsm Atlas marine fabrics.
- Flat double lock seam stitching and highest quality UV threads ensure an extended life expectancy.
- 6mm breaded rope encased in hem, rope ratchet for easy gathering and tighten down the cover.
- Air vent provide air circulation.
- Storage bag when not in used
- A full set of Rope Ends, Rope Cleats and Tie-down Rope.
BOAT LENGTH
MAX. BEAM WIDTH
ORDER CODE 4.7m – 5.0m 2.25m MA 204-9 5.0m – 5.3m 2.4m MA 204-10 5.3m – 5.6m 2.4m MA 204-11 5.6m – 5.9m 2.45m MA 204-12 5.9m – 6.3m 2.50m MA 204-13 6.3m – 6.7m 2.50m MA 204-14 SKU: MA 204-11 -
Biminis, Canopies and Boat Covers, Boat Covers
OCEANSOUTH Centre Console Cover 5.9 – 6.3m
OCEANSOUTH Centre Console Cover 5.9 – 6.3m
Trailerable high quality cover. Designed to fit Centre Console type boats, suitable for boats with bow rails up to 350mm height and console (from Gunwale) up to 800mm height. Genuine Professional Quality, for the serious Boater. An excellent quality boat cover which will give your boat protection through the seasons.
- Designed to fit Centre Console type boats
- Ideal for trailering and long-term storage.
- Fits boats with bow rails up to 350mm height and console (from Gunwale) up to 800mm height.
- The cover is constructed of the highest quality 280gsm Atlas marine fabrics.
- Flat double lock seam stitching and highest quality UV threads ensure an extended life expectancy.
- 6mm breaded rope encased in hem, rope ratchet for easy gathering and tighten down the cover.
- Air vent provide air circulation.
- Storage bag when not in used
- A full set of Rope Ends, Rope Cleats and Tie-down Rope.
BOAT LENGTH
MAX. BEAM WIDTH
ORDER CODE 4.7m – 5.0m 2.25m MA 204-9 5.0m – 5.3m 2.4m MA 204-10 5.3m – 5.6m 2.4m MA 204-11 5.6m – 5.9m 2.45m MA 204-12 5.9m – 6.3m 2.50m MA 204-13 6.3m – 6.7m 2.50m MA 204-14 SKU: MA 204-13 -
Biminis, Canopies and Boat Covers, Boat Covers
OCEANSOUTH Centre Console Cover 6.3 – 6.7m
OCEANSOUTH Centre Console Cover 6.3 – 6.7m
Trailerable high quality cover. Designed to fit Centre Console type boats, suitable for boats with bow rails up to 350mm height and console (from Gunwale) up to 800mm height. Genuine Professional Quality, for the serious Boater. An excellent quality boat cover which will give your boat protection through the seasons.
- Designed to fit Centre Console type boats
- Ideal for trailering and long-term storage.
- Fits boats with bow rails up to 350mm height and console (from Gunwale) up to 800mm height.
- The cover is constructed of the highest quality 280gsm Atlas marine fabrics.
- Flat double lock seam stitching and highest quality UV threads ensure an extended life expectancy.
- 6mm breaded rope encased in hem, rope ratchet for easy gathering and tighten down the cover.
- Air vent provide air circulation.
- Storage bag when not in used
- A full set of Rope Ends, Rope Cleats and Tie-down Rope.
BOAT LENGTH
MAX. BEAM WIDTH
ORDER CODE 4.7m – 5.0m 2.25m MA 204-9 5.0m – 5.3m 2.4m MA 204-10 5.3m – 5.6m 2.4m MA 204-11 5.6m – 5.9m 2.45m MA 204-12 5.9m – 6.3m 2.50m MA 204-13 6.3m – 6.7m 2.50m MA 204-14 SKU: MA 204-14 -
Bimini Tops and T-Tops, Rod Holders
OCEANSOUTH Clamp On Alloy Rocket Launcher Kit
OCEANSOUTH Clamp On Alloy Rocket Launcher Kit
The Oceansouth Clamp-On Fishing Rod Holder/Rocket Launcher is an essential accessory for any fishing enthusiast. Designed to provide convenience and efficiency, this versatile rod holder allows you to secure and organize up to six fishing rods simultaneously.
Crafted with high-quality materials, the Oceansouth Clamp-On Fishing Rod Holder/Rocket Launcher ensures durability and long-lasting performance even in challenging marine environments. The holder features a sturdy and adjustable clamp mechanism, allowing it to be easily attached to a variety of surfaces. This versatility ensures that you can use it wherever your fishing adventures take you.
Whether you’re trolling for big game fish, angling for freshwater species, or simply enjoying a relaxing day on the water, the Oceansouth Clamp-On Fishing Rod Holder/Rocket Launcher is an indispensable tool for any angler. Its robust construction, user-friendly design and capacity to accommodate multiple rods make it an excellent choice for both seasoned fishermen and beginners alike. Invest in this reliable and efficient rod holder to enhance your fishing experience and make every outing a success.
- 6 Hi-Impact noncorrosive polymer rod holders- metallic finish
- Alloy double knuckle clamp secures the Launcher firmly to your bimini
- Can be trimmed to suit your Bimini up to 1.9m in canopy width
- Crossbars can be shortened to suit your bimini width
MAx. WIDTH ORDER CODE 1.9m MA 110 Instructions
SKU: MA 110 -
Bimini Tops and T-Tops, Biminis, Canopies and Boat Covers
OCEANSOUTH Classic Design T-Top
OCEANSOUTH Classic Design T-Top
The Classic Oceansouth T-Top has stood the test of time as a trusted favorite among boating enthusiasts. Its design is not only versatile but also practical, making it a reliable choice for a wide range of center console widths. With adjustable uprights and a side mount, this T-Top offers adaptability to fit different boat configurations, ensuring a secure and customized fit for your vessel.
Standing at a height of 2.05 meters, the Classic T-Top can be easily shortened to meet your specific height requirements, providing flexibility to accommodate various boat sizes. Constructed from Ø32mm bright-dipped aluminum tube, it combines strength and lightweight design, while the heavy-duty Dope dyed polyester fabric at 320g/m2 ensures robustness and resistance to the elements. This T-Top also offers convenience with its removable top for storage and the option to mount equipment on its upright crossbars. With connectors and mounts made from marine-grade polymers and 316-grade stainless steel fasteners, the Classic Oceansouth T-Top is a dependable choice for boaters seeking a durable and adaptable solution that requires medium-level assembling skills.
- 2.05m height. Can be shortened to required height.
- Ø32mm bright – dipped aluminium tube.
- Heavy duty – Dope dyed polyester fabric 320g/m2.
- Top can be removed for storage.
- Equipment can be mounted on upright crossbars.
- All connectors and mounts made from
- marine grade polymers.
- 316 grade stainless steel fasteners.
- Medium assembling skills required.
T-Top Width Max. Console Width Order Code 1.2m 0.85m MA 080-1 1.4m 1.05m MA 080-2 Fabric Details
Weight 310g/m² Material 100% High Tech Polyester Water Column ≥ 150 mbar (1500 mm) Light & Weather Fastness Note 6-7 Tensile Strength ≈ 2200 N¹ | 1400 N² Elongation ≈ 40 %¹ | 30 %² Colour Fastness to rubbing Note 4-5³ | Note 44 Chlorine Resistant Note 4-5 Water Repellency Note 100 Oil Repellency Note 4 Coating Polyurethan [PU] UV Protection Factor UPF 50+ (measured > UPF 80) SKU: MA 080-1B, MA 080-1BK, MA 080-2B, MA 080-2BK -
Outboard Covers
OCEANSOUTH Cowling Covers for Yamaha Outboards (Storage)
OCEANSOUTH Cowling Covers for Yamaha Outboards (Storage)
The Oceansouth Cowling Covers for Yamaha outboards are meticulously designed to provide top-notch protection for your engine, safeguarding it against dust, grime, and UV fading. Tailored for storage and trailering purposes, these covers ensure that your Yamaha outboard motor remains in peak condition during transportation or while in storage.
Constructed from 340 g/m2 heavy polyester canvas with advanced coating technology, these covers offer maximum water resistance, UV protection, and breathability, making them suitable for various environmental conditions. The covers feature a soft felt inner lining for added care and comfort, and the Twin Rope Cleat makes it easy to tighten the cover securely. With an unwavering commitment to using the highest quality materials and craftsmanship, these covers are built to withstand the test of time, ensuring your valuable Yamaha outboard motor is well-protected and ready for action whenever you need it, whether you’re trailering your boat or storing it for the season.- 340 g/m2 heavy polyester canvas with advanced coating technology assures maximum water resistance, UV protection & breath-ability.
- Soft Felt inner lining.
- Twin Rope Cleat for easy tightening.
- The highest quality materials and craftsmanship stand the test of time.
- For storage and trailering purposes only. Check out our Vented range for covers to stay on whilst out on the water.
Fabric Details
Weight 340 g/m2 Material 100% High Tech Polyester Water Column ≥ 150 mbar (1500 mm) Light & Weather Fastness Note 6-7 Tensile Strength ≈ 2200 N¹ | 1400 N² Elongation ≈ 40 %¹ | 30 %² Colour Fastness to rubbing Note 4-5³ | Note 44 Chlorine Resistant Note 4-5 Water Repellency Note 100 Oil Repellency Note 4 Coating Polyurethan [PU] UV Protection Factor UPF 50+
(measured value > UPF 80)
SKU: Y55-S, Y50-S, Y45-S, Y40-S, Y35A-S, Y35-S, Y30-S, Y25-S, Y24-S, Y20-S, Y15-S, Y10A-S, Y10-S, Y05-S, Y05A-S, Y00-S, Y000-S -
Seating, Seats
OCEANSOUTH Deluxe Folding Boat Seat
OCEANSOUTH Deluxe Folding Boat Seat
The Oceansouth Deluxe Folding Boat Seat is a premium seating solution that combines comfort, durability, and style to enhance your boating experience. Available in a range of colors, this seat is designed to offer unparalleled comfort and security, ensuring that you can relax and enjoy your time on the water to the fullest.
Measuring 41.6 cm in height, 41 cm in width, and 50 cm in depth, with a seat depth of 37.7 cm, this folding boat seat provides ample space for comfortable seating during your boat trips. The comfortable thick molded foam cushions offer a plush and supportive seating experience, while the UV-resistant fabric by OMNOVA ensures that the seat’s color remains vibrant and fade-resistant, even when exposed to the sun. The large aluminum powder-coated hinges provide stability and durability, and the seat is compatible with standard 7″ swivels or the Titan Swivel for easy rotation. With a heavy-duty molded plastic inner frame, the Oceansouth Deluxe Folding Boat Seat is built to withstand the rigors of marine environments and provide long-lasting comfort for your boating adventures.- Folding Boat Seats Deluxe comfortable thick moulded foam cushions
- UV resistant fabric by OMNOVA
- Large aluminium powder coated hinges
- Suits standard 7″ swivels or Titan Swivel
- Heavy duty moulded plastic inner frame
SKU DESCRIPTION COLOR MA 704-10 
Deluxe – folding seat White MA 704-11 
Deluxe – folding seat Grey MA 704-31 
Deluxe – folding seat Blue/White MA 704-32 
Deluxe – folding seat Grey/White MA 704-33 
Deluxe – folding seat Charcoal/Grey Fabric Details
Weight 900 g/m2 Composition PVC Backing Polyester Knit Martindale Test >60.000 Rubs Wyzenbeek Flame Retardant UK BS 5852, deel 1 volgens ISO 8191-1 Flame Retardant USA California Technical Bulletin 117 Sec. E QUV 650 Hours UV Protection Factor UPF 50+
(measured value > UPF 80)SKU: MA 704-10, MA 704-11, MA 704-31, MA 704-32, MA 704-33 -
Seat Cushions, Seating
OCEANSOUTH Esky Cooler Ice Box Cushions
OCEANSOUTH Esky Cooler Ice Box Cushions
Oceansouth Australia Esky Cooler Ice-Box Cushions is an innovative and versatile accessory designed to enhance your outdoor leisure experience. These cushions are specifically crafted to fit perfectly on top of your cooler, ice box, or esky providing a comfortable seating surface while keeping your drinks and food cool.
With Oceansouth Australia Esky Cooler Ice-Box Cushions, you no longer have to choose between sitting on a hard surface or sacrificing chilled storage space. The cushions are constructed with premium-quality materials that are both durable and comfortable. The outer layer is made from a rugged, water-resistant OMNOVA fabric that can withstand outdoor conditions, including spills and splashes, and is secured to the cooler via Velcro strips located on the underside of the cushion.
The interior of the cushions features a thick layer of high-density closed-cell foam which provides excellent cushioning and insulation properties. The design of Oceansouth Australia Esky Cooler Ice-Box Cushions is not only functional but also visually appealing with the choice of either white or grey fabric.
These cushions are incredibly versatile and suitable for various outdoor activities. Whether you’re in the boat, planning a picnic, camping or beach outing, or simply enjoying a backyard barbecue, Oceansouth Australia Esky Cooler Ice-Box Cushions provide a comfortable and practical seating solution that combines functionality with style.
CODE WIDTH(mm) LENGTH(mm) MA 740 38-24 240 380 MA 740 38-31 310 380 MA 740 45-34 340 450 MA 740 68-38 380 680 MA 740 73-38 380 730 MA 740 50-40 400 500 MA 740 58-40 400 580 MA 740 77-41 410 770 MA 740 90-43 430 900 MA 740 100-44 440 1000 MA 740 114-49 490 1140 MA 740 140-52 520 1400 MA 740 160-62 620 1600 SKU: MA 740 38-24, MA 740 38-31, MA 740 45-34, MA 740 68-38, MA 740 73-38, MA 740 50-40, MA 740 58-40, MA 740 77-41, MA 740 90-43, MA 740 100-44, MA 740 114-49, MA 740 140-52, MA 740 160-62 -
Seat Cushions, Seating
OCEANSOUTH Fabric Seat Cushions – Deck/Cockpit Cushions
OCEANSOUTH Fabric Seat Cushions – Deck/Cockpit Cushions
Oceansouth Deck/Cockpit Cushions offer the perfect solution for enhancing the comfort and style of your boat’s deck, cockpit, or bench seating. These versatile cushions are designed to provide ultimate comfort with their dense 65mm thick foam, ensuring you and your guests can relax while onboard. Constructed from Altas Marine-grade fabrics, these cushions are specifically engineered to withstand the rigors of saltwater and prolonged exposure to the sun and UV rays. The heavy-duty PVC mesh backing not only adds durability but also ensures efficient drainage of water, preventing water buildup. Available in a range of 13 different sizes and two elegant color options (Blue & Grey or White), these deck and cockpit cushions are designed to fit your specific needs.
The removable design of these cushions, featuring marine-grade male/female studs, makes them easy to attach and remove as needed, keeping your boat’s deck, cockpit, or bench area tidy and clean. The UV and weather-resistant characteristics, along with color fastness to light grade 6-7, ensure that these cushions maintain their appearance and performance, even in the harshest marine conditions. Whether you’re enjoying a day of cruising, fishing, or simply relaxing on your boat, Oceansouth Deck/Cockpit Cushions provide the perfect combination of style and comfort to enhance your boating experience.
- Removable when not in use, Marine-grade (Male / female studs)
- Dense 65mm thick foam.
- Altas Dope Dyed Polyester marine fabrics 310 gsm – Blue & Grey Cushions
- PVC Fabric – White Cushions
- Heavy-duty PVC Mesh Backing (allows water to drain)
- UVR 92 Bonded Polyester
- Marine-grade #5 Derlin zippers
- UV & weather resistant
- Colour fastness to light grade 6-7
CODE WIDTH(mm) LENGTH(mm) MA 720-1 300 450 MA 720-2 300 1200 MA 720-3 370 450 MA 720-4 370 1200 MA 720-5 370 1300 MA 720-6 370 1400 MA 720-7 370 1500 MA 720-8 370 1600 MA 720-9 370 1800 MA 720-10 420 450 MA 720-11 420 1600 MA 720-12 420 1700 MA 720-13 420 1800 SKU: MA 720-1, MA 720-2, MA 720-3, MA 720-4, MA 720-5, MA 720-6, MA 720-7, MA 720-8, MA 720-9, MA 720-10, MA 720-11, MA 720-12, MA 720-13 -
Seating, Seats
Oceansouth Fisherman Boat Seat – Blue/White
Oceansouth Fisherman Boat Seat – Blue/White
* This product due to its bulky nature requires an additional freight surcharge. We will contact you regarding this depending on location – or simply contact us on 0732658016 for a quote.
- Marine-Grade Polymer Construction: Built to withstand harsh marine environments, ensuring long-term durability.
- Thick Moulded Foam Seat and Back Cushions: Offers superior comfort for extended periods of sitting.
- UV-Resistant OMNOVA Fabric: Helps maintain the seat’s vibrant colour even after prolonged sun exposure.
- Aluminum Powder-Coated Hinges: Provides enhanced stability and durability.
- Heavy-Duty Moulded Plastic Inner Frame: Ensures reliable performance and longevity.
- Versatile Compatibility: Fits all standard 7” swivel bases, Oceansouth pedestals and Oceansouth Titan Removeable Swivels.
- Multiple colours to choose from
With dimensions of 40cm in height, 53cm in width, and 50cm in depth and a seat depth of 46cm, the Oceansouth Fisherman Boat Seat combines functionality and style to enhance your boating experience.
SKU: MA 702-21
