Shop
Showing 2281–2310 of 3890 results
-
Electrical, Switches
Momentary Switch – Brass (114152)
Momentary Switch – Brass (114152)
Brass, waterproof starter switch supplied complete with removable rubber cover over brass switch. Chromed above dash button and trim ring. 12/24 volt, 25 amp.
Features:
BLA Code: 114152
Bezel Dia. mm: 21
Stem Dia.mm: 16
Dash Thickness mm: 23
Overall Length mm: 72
Intrusion mm: 54SKU: 114152 -
Electrical, Switches
Momentary Switch – Plastic (114150)
Momentary Switch – Plastic (114150)
Push button momentary switch. Black neoprene waterproof protector. Suitable for 12/24 volt applications.
Features:
BLA Code: 114150
Panel Thickness mm: 6
Dia.mm: 30
Protrusion mm: 18
Intrusion mm: 22
Mount Hole mm: 22SKU: 114150 -
Outboard Parts, Steering
MULTIFLEX Complete Hydraulic Steering Kit – for Motors to 350hp
MULTIFLEX Complete Hydraulic Steering Kit – for Motors to 350hp
MULTIFLEX MultiSteer Hydraulic steering kit with hose (6m) for motors up to 350hp. Built in lock valve to prevent feedback from the outboard plus integral relief valve to protect the steering system from excess pressure.
Features 316 Stainless Steel Hard Chrome plated piston rod, support rod and fasteners while the tube, tiller plate and support brackets are made of high quality anodised aluminium with ultimate tensile strength. Easily accessible lock valve seals and shaft seal for replacement when necessary.
Mounting hardware and template included with the helm plus a pair of 90° adjustable chrome plated brass elbows to connect to 5/16hose. Installation for single engine. Suits 3/4 standard tapered shaft.
Installation Manual
Multisteer Installation Steps Of Hydraulic Steering System OH 350
SKU: EJM-712276 -
Outboard Parts, Steering
MULTIFLEX Planatary Helm
MULTIFLEX Planetary Helm
Premium quality quick connect single cable helm with planetary gearing system for smoother steering and minimal feedback, in a compact aff ordable unit. As used in our steering kits on previous page. Suitable for outboard, inboard and sterndrives boats up to around 9 metres and max speed of 50 MPH (80 KPH). The helm is made from non-corrosive cast alloy and can be mounted at 90 or 20 degrees using the appropriate bezel kit, sold separately. Suitable for Multiflex cables and also suits most Ultraflex and Teleflex quick connect steering cables.
SKU: RWB7630 -
Outboard Parts, Steering
MULTIFLEX Planatary Helm 20° Black Bezel
MULTIFLEX Planatary Helm 20° Black Bezel
Bezel kit suitable for mounting Multiflex helms shown above. Includes black bezel, mounting bracket, key & nut for helm and all bezel mounting hardware. 90 degree or 20 degree angle.
SKU: RWB7635 -
Outboard Parts, Steering
MULTIFLEX Planatary Helm 90° Black Bezel
MULTIFLEX Planatary Helm 90° Black Bezel
Bezel kit suitable for mounting Multiflex helms shown above. Includes black bezel, mounting bracket, key & nut for helm and all bezel mounting hardware. 90 degree or 20 degree angle.
SKU: RWB7636 -
Outboard Parts, Steering
MULTIFLEX Steering Cable – 10ft / 3.05m
MULTIFLEX Steering Cable – 10ft / 3.05m
Measuring Steering Cables Add A + B + C and subtract 100mm for each 90 degree bend in the cable. For installation through the engine tilt tube, add 305mm (1 ft) to the measure calculated above (When measuring cable length in millimetres (mm) divide by 305 to convert to feet) and then round up to the next whole foot. Multiflex steering cables are quick connect steering cables with stainless steel ends which enable the cable to be attached directly to the tilt tube on all popular brands of engines. It has a minimum bend radius of 200mm and a stroke length of 228mm. These cables are compatible with most Teleflex and Ultraflex helms and cables, and other brands.
SKU: RWB7602 -
Outboard Parts, Steering
MULTIFLEX Steering Cable – 11ft / 3.35m
MULTIFLEX Steering Cable – 11ft / 3.35m
Measuring Steering Cables Add A + B + C and subtract 100mm for each 90 degree bend in the cable. For installation through the engine tilt tube, add 305mm (1 ft) to the measure calculated above (When measuring cable length in millimetres (mm) divide by 305 to convert to feet) and then round up to the next whole foot. Multiflex steering cables are quick connect steering cables with stainless steel ends which enable the cable to be attached directly to the tilt tube on all popular brands of engines. It has a minimum bend radius of 200mm and a stroke length of 228mm. These cables are compatible with most Teleflex and Ultraflex helms and cables, and other brands.
SKU: RWB7603 -
Outboard Parts, Steering
MULTIFLEX Steering Cable – 12ft / 3.66m
MULTIFLEX Steering Cable – 12ft / 3.66m
Measuring Steering Cables Add A + B + C and subtract 100mm for each 90 degree bend in the cable. For installation through the engine tilt tube, add 305mm (1 ft) to the measure calculated above (When measuring cable length in millimetres (mm) divide by 305 to convert to feet) and then round up to the next whole foot. Multiflex steering cables are quick connect steering cables with stainless steel ends which enable the cable to be attached directly to the tilt tube on all popular brands of engines. It has a minimum bend radius of 200mm and a stroke length of 228mm. These cables are compatible with most Teleflex and Ultraflex helms and cables, and other brands.
SKU: RWB7604 -
Outboard Parts, Steering
MULTIFLEX Steering Cable – 13ft / 3.96m
MULTIFLEX Steering Cable – 13ft / 3.96m
Measuring Steering Cables Add A + B + C and subtract 100mm for each 90 degree bend in the cable. For installation through the engine tilt tube, add 305mm (1 ft) to the measure calculated above (When measuring cable length in millimetres (mm) divide by 305 to convert to feet) and then round up to the next whole foot. Multiflex steering cables are quick connect steering cables with stainless steel ends which enable the cable to be attached directly to the tilt tube on all popular brands of engines. It has a minimum bend radius of 200mm and a stroke length of 228mm. These cables are compatible with most Teleflex and Ultraflex helms and cables, and other brands.
SKU: RWB7605 -
Outboard Parts, Steering
MULTIFLEX Steering Cable – 14ft / 4.27m
MULTIFLEX Steering Cable – 14ft / 4.27m
Measuring Steering Cables Add A + B + C and subtract 100mm for each 90 degree bend in the cable. For installation through the engine tilt tube, add 305mm (1 ft) to the measure calculated above (When measuring cable length in millimetres (mm) divide by 305 to convert to feet) and then round up to the next whole foot. Multiflex steering cables are quick connect steering cables with stainless steel ends which enable the cable to be attached directly to the tilt tube on all popular brands of engines. It has a minimum bend radius of 200mm and a stroke length of 228mm. These cables are compatible with most Teleflex and Ultraflex helms and cables, and other brands.
SKU: RWB7606 -
Outboard Parts, Steering
MULTIFLEX Steering Cable – 15ft / 4.57m
MULTIFLEX Steering Cable – 15ft / 4.57m
Measuring Steering Cables Add A + B + C and subtract 100mm for each 90 degree bend in the cable. For installation through the engine tilt tube, add 305mm (1 ft) to the measure calculated above (When measuring cable length in millimetres (mm) divide by 305 to convert to feet) and then round up to the next whole foot. Multiflex steering cables are quick connect steering cables with stainless steel ends which enable the cable to be attached directly to the tilt tube on all popular brands of engines. It has a minimum bend radius of 200mm and a stroke length of 228mm. These cables are compatible with most Teleflex and Ultraflex helms and cables, and other brands.
SKU: RWB7607 -
Outboard Parts, Steering
MULTIFLEX Steering Cable – 16ft / 4.88m
MULTIFLEX Steering Cable – 16ft
Measuring Steering Cables Add A + B + C and subtract 100mm for each 90 degree bend in the cable. For installation through the engine tilt tube, add 305mm (1 ft) to the measure calculated above (When measuring cable length in millimetres (mm) divide by 305 to convert to feet) and then round up to the next whole foot. Multiflex steering cables are quick connect steering cables with stainless steel ends which enable the cable to be attached directly to the tilt tube on all popular brands of engines. It has a minimum bend radius of 200mm and a stroke length of 228mm. These cables are compatible with most Teleflex and Ultraflex helms and cables, and other brands.
SKU: RWB7608 -
Outboard Parts, Steering
MULTIFLEX Steering Cable – 17ft / 5.18m
MULTIFLEX Steering Cable – 17ft / 5.18m
Measuring Steering Cables Add A + B + C and subtract 100mm for each 90 degree bend in the cable. For installation through the engine tilt tube, add 305mm (1 ft) to the measure calculated above (When measuring cable length in millimetres (mm) divide by 305 to convert to feet) and then round up to the next whole foot. Multiflex steering cables are quick connect steering cables with stainless steel ends which enable the cable to be attached directly to the tilt tube on all popular brands of engines. It has a minimum bend radius of 200mm and a stroke length of 228mm. These cables are compatible with most Teleflex and Ultraflex helms and cables, and other brands.
SKU: RWB7609 -
Outboard Parts, Steering
MULTIFLEX Steering Cable – 18ft / 5.49m
MULTIFLEX Steering Cable – 18ft / 5.49m
Measuring Steering Cables Add A + B + C and subtract 100mm for each 90 degree bend in the cable. For installation through the engine tilt tube, add 305mm (1 ft) to the measure calculated above (When measuring cable length in millimetres (mm) divide by 305 to convert to feet) and then round up to the next whole foot. Multiflex steering cables are quick connect steering cables with stainless steel ends which enable the cable to be attached directly to the tilt tube on all popular brands of engines. It has a minimum bend radius of 200mm and a stroke length of 228mm. These cables are compatible with most Teleflex and Ultraflex helms and cables, and other brands.
SKU: RWB7610 -
Outboard Parts, Steering
MULTIFLEX Steering Cable – 19ft / 5.79m
MULTIFLEX Steering Cable – 19ft / 5.79m
Measuring Steering Cables Add A + B + C and subtract 100mm for each 90 degree bend in the cable. For installation through the engine tilt tube, add 305mm (1 ft) to the measure calculated above (When measuring cable length in millimetres (mm) divide by 305 to convert to feet) and then round up to the next whole foot. Multiflex steering cables are quick connect steering cables with stainless steel ends which enable the cable to be attached directly to the tilt tube on all popular brands of engines. It has a minimum bend radius of 200mm and a stroke length of 228mm. These cables are compatible with most Teleflex and Ultraflex helms and cables, and other brands.
SKU: RWB7611 -
Outboard Parts, Steering
MULTIFLEX Steering Cable – 20ft / 6.10m
MULTIFLEX Steering Cable – 20ft / 6.10m
Measuring Steering Cables Add A + B + C and subtract 100mm for each 90 degree bend in the cable. For installation through the engine tilt tube, add 305mm (1 ft) to the measure calculated above (When measuring cable length in millimetres (mm) divide by 305 to convert to feet) and then round up to the next whole foot. Multiflex steering cables are quick connect steering cables with stainless steel ends which enable the cable to be attached directly to the tilt tube on all popular brands of engines. It has a minimum bend radius of 200mm and a stroke length of 228mm. These cables are compatible with most Teleflex and Ultraflex helms and cables, and other brands.
SKU: RWB7612 -
Outboard Parts, Steering
MULTIFLEX Steering Cable – 21ft / 6.40m
MULTIFLEX Steering Cable – 21ft / 6.40m
Measuring Steering Cables Add A + B + C and subtract 100mm for each 90 degree bend in the cable. For installation through the engine tilt tube, add 305mm (1 ft) to the measure calculated above (When measuring cable length in millimetres (mm) divide by 305 to convert to feet) and then round up to the next whole foot. Multiflex steering cables are quick connect steering cables with stainless steel ends which enable the cable to be attached directly to the tilt tube on all popular brands of engines. It has a minimum bend radius of 200mm and a stroke length of 228mm. These cables are compatible with most Teleflex and Ultraflex helms and cables, and other brands.
SKU: RWB7613 -
Outboard Parts, Steering
MULTIFLEX Steering Cable – 22ft / 6.71m
MULTIFLEX Steering Cable – 22ft / 6.71m
Measuring Steering Cables Add A + B + C and subtract 100mm for each 90 degree bend in the cable. For installation through the engine tilt tube, add 305mm (1 ft) to the measure calculated above (When measuring cable length in millimetres (mm) divide by 305 to convert to feet) and then round up to the next whole foot. Multiflex steering cables are quick connect steering cables with stainless steel ends which enable the cable to be attached directly to the tilt tube on all popular brands of engines. It has a minimum bend radius of 200mm and a stroke length of 228mm. These cables are compatible with most Teleflex and Ultraflex helms and cables, and other brands.
SKU: RWB7614 -
Outboard Parts, Steering
MULTIFLEX Steering Cable – 23ft / 7.01m
MULTIFLEX Steering Cable – 23ft / 7.01m
Measuring Steering Cables Add A + B + C and subtract 100mm for each 90 degree bend in the cable. For installation through the engine tilt tube, add 305mm (1 ft) to the measure calculated above (When measuring cable length in millimetres (mm) divide by 305 to convert to feet) and then round up to the next whole foot. Multiflex steering cables are quick connect steering cables with stainless steel ends which enable the cable to be attached directly to the tilt tube on all popular brands of engines. It has a minimum bend radius of 200mm and a stroke length of 228mm. These cables are compatible with most Teleflex and Ultraflex helms and cables, and other brands.
SKU: RWB7615 -
Outboard Parts, Steering
MULTIFLEX Steering Cable – 24ft / 7.32m
MULTIFLEX Steering Cable – 24ft / 7.32m
Measuring Steering Cables Add A + B + C and subtract 100mm for each 90 degree bend in the cable. For installation through the engine tilt tube, add 305mm (1 ft) to the measure calculated above (When measuring cable length in millimetres (mm) divide by 305 to convert to feet) and then round up to the next whole foot. Multiflex steering cables are quick connect steering cables with stainless steel ends which enable the cable to be attached directly to the tilt tube on all popular brands of engines. It has a minimum bend radius of 200mm and a stroke length of 228mm. These cables are compatible with most Teleflex and Ultraflex helms and cables, and other brands.
SKU: RWB7616 -
Outboard Parts, Steering
MULTIFLEX Steering Cable – 25ft / 7.62m
MULTIFLEX Steering Cable – 25ft / 7.62m
Measuring Steering Cables Add A + B + C and subtract 100mm for each 90 degree bend in the cable. For installation through the engine tilt tube, add 305mm (1 ft) to the measure calculated above (When measuring cable length in millimetres (mm) divide by 305 to convert to feet) and then round up to the next whole foot. Multiflex steering cables are quick connect steering cables with stainless steel ends which enable the cable to be attached directly to the tilt tube on all popular brands of engines. It has a minimum bend radius of 200mm and a stroke length of 228mm. These cables are compatible with most Teleflex and Ultraflex helms and cables, and other brands.
SKU: RWB7617 -
Outboard Parts, Steering
MULTIFLEX Steering Cable – 8ft / 2.44m
MULTIFLEX Steering Cable – 8ft / 2.44m
Measuring Steering Cables Add A + B + C and subtract 100mm for each 90 degree bend in the cable. For installation through the engine tilt tube, add 305mm (1 ft) to the measure calculated above (When measuring cable length in millimetres (mm) divide by 305 to convert to feet) and then round up to the next whole foot. Multiflex steering cables are quick connect steering cables with stainless steel ends which enable the cable to be attached directly to the tilt tube on all popular brands of engines. It has a minimum bend radius of 200mm and a stroke length of 228mm. These cables are compatible with most Teleflex and Ultraflex helms and cables, and other brands.
SKU: RWB7600 -
Outboard Parts, Steering
MULTIFLEX Steering Cable – 9ft / 2.74m
MULTIFLEX Steering Cable – 9ft / 2.74m
Measuring Steering Cables Add A + B + C and subtract 100mm for each 90 degree bend in the cable. For installation through the engine tilt tube, add 305mm (1 ft) to the measure calculated above (When measuring cable length in millimetres (mm) divide by 305 to convert to feet) and then round up to the next whole foot. Multiflex steering cables are quick connect steering cables with stainless steel ends which enable the cable to be attached directly to the tilt tube on all popular brands of engines. It has a minimum bend radius of 200mm and a stroke length of 228mm. These cables are compatible with most Teleflex and Ultraflex helms and cables, and other brands.
SKU: RWB7601 -
Boating Accessories, Hatches and Ports
Nairn Inspection Port (36101)
Nairn Inspection Port (36101)
• Nairn inspection ports are manufactured to high tolerances using premium materials to provide high strength, durability and watertightness even in the most demanding applications.
• In short, total product integrity.
• Rims and coloured lids are made from ABS plastic while polycarbonate plastic is used for clear lids to give both high transparency and impact resistance.Features:
Part No.: 36101
Description: 4”Opening White Inspection Port
Cut out(mm): 133
ID(mm): 100
OD(mm): 144
Mounting Holes: 6 x 4mmSKU: 36101
