Shop
Showing 3841–3870 of 3915 results
-
Lowrance, Lowrance Sonar & Transducers
XSONIC AIRMAR CM599LHW – Wide-beam Chirp-ready Cavity Mount Transducer
Lowrance, Lowrance Sonar & TransducersXSONIC AIRMAR CM599LHW – Wide-beam Chirp-ready Cavity Mount Transducer
AIRMAR CM599LHW – Wide-beam Chirp-ready Cavity Mount Transducer
Get more coverage under your boat with Airmar’s unique wide-beam, low and high-frequency, Chirp-ready CM599LHW. The high band operates across a frequency range of 150 to 250 kHz and has a fixed 25° beam for all frequencies which results in superior resolution. The constantly wide beam provides twice the coverage and clear fish arches on the display compared to most high-frequency, narrow-beam transducers.
The high wide is the ideal choice for both inshore and pelagic fishing, where resolution and maximum coverage under the boat is essential down to 152 m (500′). The low-frequency band is rated to 3 kW and produces amazing deep-water performance to 3048 m (10000′). Get the best of both worlds with Airmar’s Chirp-ready transducer with wide-beam coverage.
Features:
- Depth and fast-response water-temperature sensing
- 3 kW of power for exceptional deep-water performance
- 3 kW low frequency: 28 to 60 kHz
- 23° to 9° port-starboard beamwidth
- 11° to 5° fore-aft beamwidth
- Maximum depth of 3048 m (10000′)
- 1 kW high frequency: 150 to 250 kHz
- 25° constant beamwidth
- Maximum depth of 152 m (500′)
- 132 kHz of total bandwidth from one transducer
- Covers popular fishing frequencies of 50 and 200 kHz plus everything else in the bandwidth
- High frequency delivers superior shallow-water performance, bottom detail, and fish-target separation
- High wide beamwidth yields more coverage for detecting fish in the upper-water column
- Resin housing with curved-edge design for wet-box installation
- Designed for custom mounting in a cavity or welded tank
- Also available as a thru-hull external (R509LHW) mount
- Patented Xducer ID® technology
SKU: 000-13941-001 -
Lowrance, Lowrance Sonar & Transducers
XSONIC AIRMAR M260 – Traditional/CW In-hull Transducer
AIRMAR M260 – Traditional/CW In-hull Transducer
The performance of Airmar’s “1 kW, 260 family” of transducers is legendary. The combination of power and sensitivity has made this the high-performing transducer of choice with conventional fishfinders. Operating at 50 and 200 kHz, the narrow, 6° beam at 200 kHz provides excellent target resolution and crisp images of fish holding tight to wrecks and reefs. The 50 kHz is excellent at deep-water detection, and its wide 19° beam yields broad coverage under the boat.
The transducer is installed in the included tank which is cut to the boat’s deadrise angle and affixed inside the hull. When the transducer is placed inside the tank, it is properly oriented for optimal performance. The M260 is a popular choice for customers not wanting to drill a hole in their hull and for trailered or multi-hulled boats.
SKU: 000-13914-001 -
Lowrance Sonar & Transducers, Lowrance
Xsonic Airmar P66 Transducer
The Airmar P66 Multisensor is a 600W transducer that combines depth and temperature functions in one housing. And it features our 50/200 kHz, dual-frequency, ceramic element. This hydrodynamic housing with its rounded nose reduces the turbulence under the transducer’s acoustic face for clear display images. It is Airmar’s best transom mount for boats up to 8 m (25′) long.
SKU: 000-13977-001, 000-13919-001 -
Lowrance, Clearances, Lowrance Sonar & Transducers
XSONIC AIRMAR PM275LHW – Wide-beam Chirp-ready Pocket Mount Transducer
-41%
Lowrance, Clearances, Lowrance Sonar & TransducersXSONIC AIRMAR PM275LHW – Wide-beam Chirp-ready Pocket Mount Transducer
AIRMAR PM275LHW – Wide-beam Chirp-ready Pocket Mount
Get more coverage under your boat with Airmar’s unique wide-beam, low and high-frequency, Chirp-ready PM275LHW. The high band operates across a frequency range of 150 to 250 kHz and has a fixed 25° beam for all frequencies which results in superior resolution. The constantly wide beam provides twice the coverage and clear fish arches on the display compared to most high-frequency, narrow-beam transducers.
The high wide is the ideal choice for both inshore and pelagic fishing, where resolution and maximum coverage under the boat are essentially down to 152 m (500′). The low-frequency band and 1 kW of power also support great deep-water performance. Get the best of both worlds with Airmar’s Chirp-ready transducer with wide-beam coverage.
SKU: 000-13940-001 -
Lowrance, Lowrance Sonar & Transducers
XSONIC AIRMAR R509LHW – Wide-beam Chirp-ready Thru-hull External Mount Transducer
Lowrance, Lowrance Sonar & TransducersXSONIC AIRMAR R509LHW – Wide-beam Chirp-ready Thru-hull External Mount Transducer
AIRMAR R509LHW – Wide-beam Chirp-ready Thru-hull External Mount
Get more coverage under your boat with Airmar’s unique wide-beam, low and high-frequency, Chirp-ready R509LHW. The high band operates across a frequency range of 150 to 250 kHz and has a fixed 25° beam for all frequencies which results in superior resolution. The constantly wide beam provides twice the coverage and clear fish arches on the display compared to most high-frequency, narrow-beam transducers.
The high wide is the ideal choice for both inshore and pelagic fishing, where resolution and maximum coverage are essential down to 152 m (500′). The low-frequency band is rated to 3 kW and delivers amazing deep-water performance to 3048 m (10000′). Get the best of both worlds with Airmar’s Chirp-ready transducer with wide-beam coverage.
SKU: 000-13773-001 -
Lowrance, Lowrance Sonar & Transducers
XSONIC AIRMAR SS164 – Traditional/CW Tilted Element™ Thru-hull Transducer
Lowrance, Lowrance Sonar & TransducersXSONIC AIRMAR SS164 – Traditional/CW Tilted Element™ Thru-hull Transducer
AIRMAR SS164 – Traditional/CW Tilted Element™ Thru-hull Transducer
Step up to a 1 kW—without a fairing! This 1 kW, flush-mount transducer is perfect for fast, trailered, tournament and sport-fishing vessels that cannot accommodate a High-performance Fairing. The flush-mounted, stainless steel housing extends less than 6.35 mm (1/4″) outside your hull, so it can sit on trailer rollers and bunks. The ceramic arrays are tilted inside the housing, providing the perfect vertical beam with maximum energy on what is directly below the boat.
Available in three Tilted Element models:
- Fixed 20° tilted version for 16 to 24° hull deadrise angles
- Fixed 12° tilted version for 8 to 15° hull deadrise angles
- Fixed 0° tilted version for 0 to 7° hull deadrise angles
SKU: 000-13916-001, 000-13917-001, 000-13918-001 -
Lowrance, Lowrance Sonar & Transducers
XSONIC AIRMAR SS260 – Traditional/CW Thru-hull Transducer
AIRMAR SS260 – Traditional/CW Thru-hull Transducer
The performance of Airmar’s “1 kW, 260 family” of transducers is legendary. The combination of power and sensitivity has made this the high-performing transducer of choice with conventional fishfinders. Operating at 50 and 200 kHz, the narrow, 6° beam at 200 kHz provides excellent target resolution and crisp images of fish holding tight to wrecks and reefs. The 50 kHz is excellent at deep-water detection, and its wide, 19° beam yields broad coverage under the boat.
SS260 features a stainless steel housing which is compatible with all hull materials. Installed with the included, custom-fitting, High-performance Fairing, the SS260 gives excellent results at speeds up to 30 knots (34 MPH).
SKU: 000-13783-001 -
Lowrance, Lowrance Sonar & Transducers
XSONIC AIRMAR SS60 – Traditional/CW Tilted Element™ Thru-hull Transducer
Lowrance, Lowrance Sonar & TransducersXSONIC AIRMAR SS60 – Traditional/CW Tilted Element™ Thru-hull Transducer
AIRMAR SS60 – Traditional/CW Tilted Element™ Thru-hull Transducer
The SS60 is a 600 W, 50/200 kHz transducer which integrates Airmar’s popular, Tilted Element™ feature. This Tilted Element transducer has the ceramic element fixed at a 20° or 12° angle within the housing. When the transducer is installed almost flush to the hull, the tilt of the element corrects for the hull deadrise. By orienting the beam directly down, it ensures maximum echo returns to the transducer and more accurate depth readings.
Available in three Tilted Element models:
- Fixed 20° tilted version for 16 to 24° hull deadrise angles
- Fixed 12° tilted version for 8 to 15° hull deadrise angles
SKU: 000-13911-001, 000-13912-001, 000-13913-001-1 -
Lowrance, Lowrance Sonar & Transducers
XSONIC AIRMAR SS75H Chirp-ready Tilted Element Thru-hull Transducer
Lowrance, Lowrance Sonar & TransducersXSONIC AIRMAR SS75H Chirp-ready Tilted Element Thru-hull Transducer
AIRMAR SS75H Chirp-ready Tilted Element Thru-hull Transducer
Airmar’s low-profile, Chirp-ready, transducer models are the perfect addition to smaller boats such as center consoles. The high-frequency band has a narrow beamwidth, excellent for pinpointing fish holding tight to wrecks, reefs, and other structure. High frequency also shows amazing target separation on baitfish and schooling gamefish. The SS75H transducer, operating at 130 to 210 kHz, delivers up to 80 kHz of total bandwidth in just one installation for outstanding bottom detail and fish-target resolution.
Tilted Element™ transducers have the element fixed at a 20°, 12°, or 0° angle within the housing. Because the transducer is installed almost flush to the hull, the tilt corrects for the hull deadrise. It orients the ceramic element horizontally to ensure maximum echo returns to the transducer.
The SS75H is available in three Tilted Element models:
- Fixed 20° tilted version for 16 to 24° hull deadrise angles
- Fixed 12° tilted version for 6 to 15° hull deadrise angles
- Fixed 0° tilted version for 0 to 7° hull deadrise angles
SKU: 000-13911-001, 000-13912-001, 000-13913-001 -
Lowrance, Lowrance Sonar & Transducers
XSONIC AIRMAR SS75M Chirp-ready Tilted Element Thru-hull Transducer
Lowrance, Lowrance Sonar & TransducersXSONIC AIRMAR SS75M Chirp-ready Tilted Element Thru-hull Transducer
AIRMAR SS75M Chirp-ready Tilted Element Thru-hull Transducer
Airmar’s low profile Chirp-ready transducer models are the perfect addition to smaller boats such as center consoles. The SS75M delivers up to 50 kHz of total bandwidth in just one installation. With a range of 80 to 130 kHz, it shows amazing bottom detail in shallow and medium depths down to 274 m (900′).
Tilted Element™ transducers have the element fixed at a 20°, 12°, or 0° angle within the housing. When the transducer is installed almost flush to the hull, the tilt of the element corrects for the hull deadrise, orienting the beam directly down. This ensures maximum echo returns to the transducer for more accurate depth readings.
The SS75M is available in three Tilted Element models:
- Fixed 20° tilted version for 16 to 24° hull deadrise angles
- Fixed 12° tilted version for 6 to 15° hull deadrise angles
- Fixed 0° tilted version for 0 to 7° hull deadrise angles
SKU: 000-13908-001, 000-13909-001, 000-13910-001 -
Lowrance, Lowrance Sonar & Transducers
XSONIC AIRMAR TM150M Chirp-ready Transom Mount Transducer
AIRMAR TM150M Chirp-ready Transom Mount Transducer
Airmar’s TM150M delivers a great combination of shallow and mid-depth performance. Operating at a frequency range of 95 to 155 kHz, this transducer reveals fish in shallow waters and deeper depths down to 183 m (600′) with ultra-clear target resolution. Narrow beam angles are perfect for detecting fish holding close to structures and suspended fish—ideal for freshwater, inshore, or coastal fishing in shallow to medium depths. The TM150M is an excellent choice for freshwater and saltwater boats up to 8 m (25′).
SKU: 000-13944-001 -
Lowrance Sonar & Transducers, Lowrance
Xsonic Airmar TM165HW Transducer
Maximize the coverage under your boat and see what you’ve been missing. The Airmar TM165HW is a 600W transducer that features a high-frequency range of 150 to 250 kHz and a super-wide beamwidth, averaging 30°, providing maximum coverage across the frequency band. In addition to improving the performance of Chirp-capable fishfinders, anglers using this new wide-beam transducer will achieve three times the coverage compared to standard high-frequency Chirp-ready transducers.
Wide beamwidth, together with the high-frequency range, provides vast bottom coverage and precise fish detection in the upper-water column that can sometimes go unseen with narrow-beam transducers. Airmar’s new wide-beam format also creates crisper and larger return images on the display.
SKU: 000-15482-001 -
Lowrance, Lowrance Sonar & Transducers
XSONIC AIRMAR TM185HW Chirp-ready Transom Mount Transducer
AIRMAR TM185HW Chirp-ready Transom Mount Transducer
Get more coverage under your boat with Airmar’s unique, wide-beam, high-frequency, Chirp-ready TM185HW. The high-frequency band operates across a range of 150 to 250 kHz and has a fixed 25° beam. The high-frequency band yields superior shallow-water performance, bottom detail, and fish-target separation. The constantly wide beam provides twice the coverage for detecting fish in the upper-water column and clear fish arches on the display compared to most high-frequency, narrow-beam transducers. The high wide is the ideal choice for both inshore and pelagic fishing, where resolution and maximum coverage are essential down to 152 m (500′).
SKU: 000-13914-001-1 -
Lowrance, Lowrance Accessories, Simrad, Simrad Accessories
xSonic Pigtail Transducer Wiring Block Adapter
Lowrance, Lowrance Accessories, Simrad, Simrad AccessoriesxSonic Pigtail Transducer Wiring Block Adapter
xSonic Pigtail Transducer Wiring Block Adapter
The xSonic Pigtail Transducer Wiring Block Adapter allows you to connect a transducer without a connector (bare wires) to a display requiring a xSonic (9-pin) connection.
SKU: 000-13262-001 -
Boating Accessories, Rod Holders
XXX Marine – Tournament Series G-Clamp Rod Holder (RHP300)
XXX Marine – Tournament Series G-Clamp Rod Holder (RHP300)
Ideal for use on boats (clamp to boat side), piers, kayaks etc. Corrosion resistant anodised and polished silver aluminum tube. 360° rotation and with fully adjustable rod angle. Turns through 12 rest position.
Features:
G Clamp mount made from aluminum with 304 stainless steel pressure screw. For boat sides up to 70mm thick.
Rod holder tube length: 280mm
Rod holder tube inner diameter: 41mmSKU: Tournament Series G-Clamp Rod Holder (RHP300) -
Boating Accessories, Rod Holders
XXX Marine – Tournament Series Rail Mount Rod Holder (RHP200)
XXX Marine – Tournament Series G-Clamp Rod Holder (RHP300)
Tournament series rail mount fishing rod holder. Corrosion resistant anodised and polished silver aluminum tube with super tough reinforced engineering grade nylon fittings and 304 stainless steel screws.
Rail mount fits the following diameters:
– 22.2mm (7/8 Inch) round tube
– 25.4mm (1 Inch) round tube
– 31.75mm (1-1/4 Inch) square tube
Rod holder tube length: 280mm
Rod holder tube inner diameter: 41mmSKU: Tournament Series Rail Mount Rod Holder (RHP200) -
Boating Accessories, Rod Holders
XXX Marine Adjustable Rod Holder with Multi-Position Mount
XXX Marine Adjustable Rod Holder with Multi-Position Mount
The XXX Marine RH100 Rod Holder has 3 mounting options. It can be surface-mounted or side mounted or rail mounted. With 12 rest positions and 360° rotation and with a fully adjustable rod angle this rod holder.
Features:
- Fitted with a rod swivel lock for keeping your fishing rod safe while trolling
- Made from UV-Resistant polypropylene plastic (PP)
- Supplied With 4 x Nut and Bolt Set
SKU: BBB-SHRRH100 -
Berley Mincers, Boating Accessories, Fishing Gear
XXX Marine Berley Mincer – Clamp On
XXX Marine Berley Mincer – Clamp On
Heavy duty cast aluminium with mincer with large sprew and removable steel die. Easy mount G-clamp system. Various dies and sausage ends available.
- Mincer made from solid cast aluminum construction
- Sturdy G clamp with grips for maximum stability (Simply clamps to the any flat surface of up to 45mm thickness)
- Cutting plate hole diameter: 12mm
- Extrusion opening: 95 – 110mm
- Medium/Coarse grinding plate (12mm holes)
- Maximum bench thickness: 45mm
SKU: BBB-SHRMM12 -
Berley Mincers, Boating Accessories, Fishing Gear
XXX Marine Berley Mincer – Large
XXX Marine Berley Mincer – Large
Large heavy duty cast aluminium with large sprew and removable steel die. Permanent mounting. Various dies and sausage ends available.
Prepare your own burley sausage and all your other favorite ground or minced burley with this quality grinder.
- Size: 300 L, 115 W, 200 H mm from the table top.
- Wheel diameter: 280mm
- Extrusion opening: 130 – 140mm
- Medium/Coarse grinding plate (12mm holes)
- Mincer made from solid cast aluminum construction
- Sturdy 4 foot design provides stability
- Handle for manual use (Parts for automatic system must be purchased separately)
- Cutting plate hole diameter: 12mm
SKU: BBB-SHRMM32 -
Berley Mincers, Boating Accessories, Fishing Gear
XXX Marine Berley Mincer – Medium
XXX Marine Berley Mincer – Medium
Heavy duty cast aluminium with large sprew and removable steel die. Permanent mounting. Various dies and sausage ends available.
Prepare your own burley sausage and all your other favourite ground or minced burley with this quality grinder.
- Size: 235mm x 100mm x 175mm from the table top.
- Wheel diameter: 240mm
- Extrusion opening: 115-130 mm
- Medium/Coarse grinding plate (12mm holes)
- Mincer made from solid cast aluminum construction
- Sturdy 4 foot design provides stability
- Handle for manual use (Parts for automatic system must be purchased separately)
- Cutting plate hole diameter: 12mm
SKU: BBB-SHRMM22 -
Berley Mincers, Boating Accessories, Fishing Gear
XXX Marine Berley Mincer Sausage Ends
XXX Marine Berley Mincer Sausage Ends
Plastic sausage ends.
Suits BBB-SHRMM12 XXX Marine Burley Mincer – Clamp On.
Suits BBB-SHRMM22 XXX Marine Burley Mincer – Medium.
Suits BBB-SHRMM32 XXX Marine Burley Mincer – Large.
SKU: BBB-SHRSE12, BBB-SHRSE22, BBB-SHRSE32 -
Boating Accessories, Fishing Gear
XXX Marine Stainless Steel Fishing Pliers – Braid Cutters
XXX Marine Stainless Steel Fishing Pliers – Braid Cutters
Manufactured from highly polished corrosion resistant stainless steel for extreme durability in the harsh outdoor environment. Heavy duty cutting blades are sharpened to cut easily through wire and braided line up to 1.8mm in diameter.
Quality spring action and soft grip allow the tool to be comfortable and easy use. Includes quick and simple one handed locking/unlocking mechanism.
SKU: BBB-SHRFT1 -
Fishing Gear, Boating Accessories
XXX Marine Stainless Steel Fishing Pliers – Long Nose
XXX Marine Stainless Steel Fishing Pliers – Long Nose
Manufactured from highly polished corrosion resistant stainless steel for extreme durability in the harsh outdoor environment. Heavy duty nose features serrated jaws for grip, crimper indent, notch bender indent, handy reel nut shifter and line side cutter.
Quality spring action and soft grip allow the tool to be comfortable and easy use. Includes quick and simple one handed locking/unlocking mechanism.
SKU: BBB-SHRFT2 -
Boating Accessories, Fishing Gear
XXX Marine Stainless Steel Fishing Pliers – Split Ring
XXX Marine Stainless Steel Fishing Pliers – Split Ring
Manufactured from highly polished corrosion resistant stainless steel for extreme durability in the harsh outdoor environment. Heavy duty nose features split ring hook, crimper indent, notch bender and split shot crimper indent plus line side cutter.
Quality spring action and soft grip allow the tool to be comfortable and easy use. Includes quick and simple one handed locking/unlocking mechanism.
SKU: BBB-SHRFT3 -
Marine Care
Yamaha 2 Stroke Marine Oil 4L
Yamaha 2 Stroke Marine Oil 4L
The Yamaha 2 Stroke Marine Oil 4L is created with ashless detergents for maximum performance with minimum ring sticking, piston burning and spark plug fouling. Minimises wear, rust and corrosion to ensure consistent and long lasting motor capabilities. For more oil, lubricant and motor accessories, shop at Anaconda today!
Features
- Ashless detergents
- Minimises wear, rust and corrosion
- Suitable for oil-injection or premix engines (air or water cooled) according to the manufacturers recommendation
Model / Product Code 90790-BS211-BT
Product Weight 4.09kg
Warranty 12 months
Primary Activity(s) Boating, FishingSKU: 9341235546415 -
Biminis, Canopies and Boat Covers, Outboard Covers
Yamaha Cowl Cover – Y100-418S for Yamaha 4 Stroke 75-100hp 1.6L Outboards
Biminis, Canopies and Boat Covers, Outboard CoversYamaha Cowl Cover – Y100-418S for Yamaha 4 Stroke 75-100hp 1.6L Outboards
Yamaha Cowl Cover – Y100-418S
Our Yamaha Cowl covers are fully-vented engine covers specifically designed to protect the cowling whilst the engine is running. Our Splash Covers fit like a second skin and are made from felt backed Polysoft marine grade fabric which is waterproof, breathable and UV stable.
Splash Covers are designed to remain on the engine at all times protecting the cowling from:
- UV Fading.
- Accidental knocks and scratches.
- Bird droppings.
- Salt corrosion.
- Lure damage.
- Ski rope burns.
So no matter what your leisure time activity may be, whether you are water-skiing, fishing or are simply moored, your engine will be kept in pristine condition.
- Yamaha Splash Covers are designed not to cover the tell tail and exhaust ports.
- Splash Covers are designed to be towed at high speeds on the outboard motor.
- Splash Covers are designed to allow access to an internal fuel tank, where fitted.
- Splash Covers are secured with marine grade shock cord that grips the engine just below where the cowling and engine head join.
Engine size: 1.6L
Fitment:
- F75LB
- F90LB
- F90XB
- F100F
**For the older models in which the vent is located at the back of the cowl, please see Y100-4S.
SKU: Y100-418S -
Biminis, Canopies and Boat Covers, Outboard Covers
Yamaha Cowl Cover – Y100-4S for Yamaha 4 Stroke 80-100hp 1.6L Outboards
Biminis, Canopies and Boat Covers, Outboard CoversYamaha Cowl Cover – Y100-4S for Yamaha 4 Stroke 80-100hp 1.6L Outboards
Yamaha Cowl Cover – Y100-4S
Our Yamaha Cowl covers are fully-vented engine covers specifically designed to protect the cowling whilst the engine is running. Our Splash Covers fit like a second skin and are made from felt backed Polysoft marine grade fabric which is waterproof, breathable and UV stable.
Splash Covers are designed to remain on the engine at all times protecting the cowling from:
- UV Fading.
- Accidental knocks and scratches.
- Bird droppings.
- Salt corrosion.
- Lure damage.
- Ski rope burns.
So no matter what your leisure time activity may be, whether you are water-skiing, fishing or are simply moored, your engine will be kept in pristine condition.
- Yamaha Splash Covers are designed not to cover the tell tail and exhaust ports.
- Splash Covers are designed to be towed at high speeds on the outboard motor.
- Splash Covers are designed to allow access to an internal fuel tank, where fitted.
- Splash Covers are secured with marine grade shock cord that grips the engine just below where the cowling and engine head join.
Engine size: 1.6L
Fitment:
- F80A
- F80AET
- F80BET
- F90BET
- F90LA
- F100A
- F100AET
- F100DET
**For the newer models in which the vent is located at the sides of the cowl, please see Y100-418S.
SKU: Y100-4S -
Biminis, Canopies and Boat Covers, Outboard Covers
Yamaha Cowl Cover – Y115-4AS for Yamaha 4 Stroke 115hp 1.7L Outboards
Biminis, Canopies and Boat Covers, Outboard CoversYamaha Cowl Cover – Y115-4AS for Yamaha 4 Stroke 115hp 1.7L Outboards
Yamaha Cowl Cover – Y115-4AS
Our Yamaha Cowl covers are fully-vented engine covers specifically designed to protect the cowling whilst the engine is running. Our Splash Covers fit like a second skin and are made from felt backed Polysoft marine grade fabric which is waterproof, breathable and UV stable.
Splash Covers are designed to remain on the engine at all times protecting the cowling from:
- UV Fading.
- Accidental knocks and scratches.
- Bird droppings.
- Salt corrosion.
- Lure damage.
- Ski rope burns.
So no matter what your leisure time activity may be, whether you are water-skiing, fishing or are simply moored, your engine will be kept in pristine condition.
- Yamaha Splash Covers are designed not to cover the tell tail and exhaust ports.
- Splash Covers are designed to be towed at high speeds on the outboard motor.
- Splash Covers are designed to allow access to an internal fuel tank, where fitted.
- Splash Covers are secured with marine grade shock cord that grips the engine just below where the cowling and engine head join.
Engine size: 1.7L
Fitment: F115AET Yamaha Outboard Motors, 2012 onwards. For earlier models, please see Y115-4S.
SKU: Y115-4AS -
Biminis, Canopies and Boat Covers, Outboard Covers
Yamaha Cowl Cover – Y115-4S for Yamaha 4 Stroke 115hp 1.7L Outboards
Biminis, Canopies and Boat Covers, Outboard CoversYamaha Cowl Cover – Y115-4S for Yamaha 4 Stroke 115hp 1.7L Outboards
Yamaha Cowl Cover – Y115-4S
Our Yamaha Cowl covers are fully-vented engine covers specifically designed to protect the cowling whilst the engine is running. Our Splash Covers fit like a second skin and are made from felt backed Polysoft marine grade fabric which is waterproof, breathable and UV stable.
Splash Covers are designed to remain on the engine at all times protecting the cowling from:
- UV Fading.
- Accidental knocks and scratches.
- Bird droppings.
- Salt corrosion.
- Lure damage.
- Ski rope burns.
So no matter what your leisure time activity may be, whether you are water-skiing, fishing or are simply moored, your engine will be kept in pristine condition.
- Yamaha Splash Covers are designed not to cover the tell tail and exhaust ports.
- Splash Covers are designed to be towed at high speeds on the outboard motor.
- Splash Covers are designed to allow access to an internal fuel tank, where fitted.
- Splash Covers are secured with marine grade shock cord that grips the engine just below where the cowling and engine head join.
Engine size: 1.7L
Fitment: F115AET (Front Vents) Yamaha Outboard Motors, 2011 or earlier. For models 2012 and later, please see Y115-4AS.
SKU: Y115-4S
