Shop
Showing 3841–3870 of 3901 results
-
Transducers
Xsonic Airmar TM260 – Traditional/CW Transom Mount Transducer
The Airmar TM260 is a 1kW transducer that comes with a rugged stainless-steel mounting bracket that is easy to install and has a streamlined shape. The performance of Airmar’s “1 kW, 260 family” of transducers is legendary. The combination of power and sensitivity has made this the high-performing transducer of choice with conventional fishfinders. Operating at 50 and 200 kHz, the narrow, 6° beam at 200 kHz provides excellent target resolution and crisp images of fish holding tight to wrecks and reefs. The 50 kHz is excellent at deep-water detection, and the wide, 19° beam yields broad coverage under the boat.
SKU: 000-13904-001 -
Lowrance, Lowrance Accessories, Simrad, Simrad Accessories
xSonic Pigtail Transducer Wiring Block Adapter
Lowrance, Lowrance Accessories, Simrad, Simrad AccessoriesxSonic Pigtail Transducer Wiring Block Adapter
xSonic Pigtail Transducer Wiring Block Adapter
The xSonic Pigtail Transducer Wiring Block Adapter allows you to connect a transducer without a connector (bare wires) to a display requiring a xSonic (9-pin) connection.
SKU: 000-13262-001 -
Boating Accessories, Rod Holders
XXX Marine – Tournament Series G-Clamp Rod Holder (RHP300)
XXX Marine – Tournament Series G-Clamp Rod Holder (RHP300)
Ideal for use on boats (clamp to boat side), piers, kayaks etc. Corrosion resistant anodised and polished silver aluminum tube. 360° rotation and with fully adjustable rod angle. Turns through 12 rest position.
Features:
G Clamp mount made from aluminum with 304 stainless steel pressure screw. For boat sides up to 70mm thick.
Rod holder tube length: 280mm
Rod holder tube inner diameter: 41mmSKU: Tournament Series G-Clamp Rod Holder (RHP300) -
Boating Accessories, Rod Holders
XXX Marine – Tournament Series Rail Mount Rod Holder (RHP200)
XXX Marine – Tournament Series G-Clamp Rod Holder (RHP300)
Tournament series rail mount fishing rod holder. Corrosion resistant anodised and polished silver aluminum tube with super tough reinforced engineering grade nylon fittings and 304 stainless steel screws.
Rail mount fits the following diameters:
– 22.2mm (7/8 Inch) round tube
– 25.4mm (1 Inch) round tube
– 31.75mm (1-1/4 Inch) square tube
Rod holder tube length: 280mm
Rod holder tube inner diameter: 41mmSKU: Tournament Series Rail Mount Rod Holder (RHP200) -
Boating Accessories, Rod Holders
XXX Marine Adjustable Rod Holder with Multi-Position Mount
XXX Marine Adjustable Rod Holder with Multi-Position Mount
The XXX Marine RH100 Rod Holder has 3 mounting options. It can be surface-mounted or side mounted or rail mounted. With 12 rest positions and 360° rotation and with a fully adjustable rod angle this rod holder.
Features:
- Fitted with a rod swivel lock for keeping your fishing rod safe while trolling
- Made from UV-Resistant polypropylene plastic (PP)
- Supplied With 4 x Nut and Bolt Set
SKU: BBB-SHRRH100 -
Berley Mincers, Boating Accessories, Fishing Gear
XXX Marine Berley Mincer – Clamp On
XXX Marine Berley Mincer – Clamp On
Heavy duty cast aluminium with mincer with large sprew and removable steel die. Easy mount G-clamp system. Various dies and sausage ends available.
- Mincer made from solid cast aluminum construction
- Sturdy G clamp with grips for maximum stability (Simply clamps to the any flat surface of up to 45mm thickness)
- Cutting plate hole diameter: 12mm
- Extrusion opening: 95 – 110mm
- Medium/Coarse grinding plate (12mm holes)
- Maximum bench thickness: 45mm
SKU: BBB-SHRMM12 -
Berley Mincers, Boating Accessories, Fishing Gear
XXX Marine Berley Mincer – Large
XXX Marine Berley Mincer – Large
Large heavy duty cast aluminium with large sprew and removable steel die. Permanent mounting. Various dies and sausage ends available.
Prepare your own burley sausage and all your other favorite ground or minced burley with this quality grinder.
- Size: 300 L, 115 W, 200 H mm from the table top.
- Wheel diameter: 280mm
- Extrusion opening: 130 – 140mm
- Medium/Coarse grinding plate (12mm holes)
- Mincer made from solid cast aluminum construction
- Sturdy 4 foot design provides stability
- Handle for manual use (Parts for automatic system must be purchased separately)
- Cutting plate hole diameter: 12mm
SKU: BBB-SHRMM32 -
Berley Mincers, Boating Accessories, Fishing Gear
XXX Marine Berley Mincer – Medium
XXX Marine Berley Mincer – Medium
Heavy duty cast aluminium with large sprew and removable steel die. Permanent mounting. Various dies and sausage ends available.
Prepare your own burley sausage and all your other favourite ground or minced burley with this quality grinder.
- Size: 235mm x 100mm x 175mm from the table top.
- Wheel diameter: 240mm
- Extrusion opening: 115-130 mm
- Medium/Coarse grinding plate (12mm holes)
- Mincer made from solid cast aluminum construction
- Sturdy 4 foot design provides stability
- Handle for manual use (Parts for automatic system must be purchased separately)
- Cutting plate hole diameter: 12mm
SKU: BBB-SHRMM22 -
Berley Mincers, Boating Accessories, Fishing Gear
XXX Marine Berley Mincer Sausage Ends
XXX Marine Berley Mincer Sausage Ends
Plastic sausage ends.
Suits BBB-SHRMM12 XXX Marine Burley Mincer – Clamp On.
Suits BBB-SHRMM22 XXX Marine Burley Mincer – Medium.
Suits BBB-SHRMM32 XXX Marine Burley Mincer – Large.
SKU: BBB-SHRSE12, BBB-SHRSE22, BBB-SHRSE32 -
Boating Accessories, Fishing Gear
XXX Marine Stainless Steel Fishing Pliers – Braid Cutters
XXX Marine Stainless Steel Fishing Pliers – Braid Cutters
Manufactured from highly polished corrosion resistant stainless steel for extreme durability in the harsh outdoor environment. Heavy duty cutting blades are sharpened to cut easily through wire and braided line up to 1.8mm in diameter.
Quality spring action and soft grip allow the tool to be comfortable and easy use. Includes quick and simple one handed locking/unlocking mechanism.
SKU: BBB-SHRFT1 -
Fishing Gear, Boating Accessories
XXX Marine Stainless Steel Fishing Pliers – Long Nose
XXX Marine Stainless Steel Fishing Pliers – Long Nose
Manufactured from highly polished corrosion resistant stainless steel for extreme durability in the harsh outdoor environment. Heavy duty nose features serrated jaws for grip, crimper indent, notch bender indent, handy reel nut shifter and line side cutter.
Quality spring action and soft grip allow the tool to be comfortable and easy use. Includes quick and simple one handed locking/unlocking mechanism.
SKU: BBB-SHRFT2 -
Boating Accessories, Fishing Gear
XXX Marine Stainless Steel Fishing Pliers – Split Ring
XXX Marine Stainless Steel Fishing Pliers – Split Ring
Manufactured from highly polished corrosion resistant stainless steel for extreme durability in the harsh outdoor environment. Heavy duty nose features split ring hook, crimper indent, notch bender and split shot crimper indent plus line side cutter.
Quality spring action and soft grip allow the tool to be comfortable and easy use. Includes quick and simple one handed locking/unlocking mechanism.
SKU: BBB-SHRFT3 -
Marine Care
Yamaha 2 Stroke Marine Oil 4L
Yamaha 2 Stroke Marine Oil 4L
The Yamaha 2 Stroke Marine Oil 4L is created with ashless detergents for maximum performance with minimum ring sticking, piston burning and spark plug fouling. Minimises wear, rust and corrosion to ensure consistent and long lasting motor capabilities. For more oil, lubricant and motor accessories, shop at Anaconda today!
Features
- Ashless detergents
- Minimises wear, rust and corrosion
- Suitable for oil-injection or premix engines (air or water cooled) according to the manufacturers recommendation
Model / Product Code 90790-BS211-BT
Product Weight 4.09kg
Warranty 12 months
Primary Activity(s) Boating, FishingSKU: 9341235546415 -
Biminis, Canopies and Boat Covers, Outboard Covers
Yamaha Cowl Cover – Y100-418S for Yamaha 4 Stroke 75-100hp 1.6L Outboards
Biminis, Canopies and Boat Covers, Outboard CoversYamaha Cowl Cover – Y100-418S for Yamaha 4 Stroke 75-100hp 1.6L Outboards
Yamaha Cowl Cover – Y100-418S
Our Yamaha Cowl covers are fully-vented engine covers specifically designed to protect the cowling whilst the engine is running. Our Splash Covers fit like a second skin and are made from felt backed Polysoft marine grade fabric which is waterproof, breathable and UV stable.
Splash Covers are designed to remain on the engine at all times protecting the cowling from:
- UV Fading.
- Accidental knocks and scratches.
- Bird droppings.
- Salt corrosion.
- Lure damage.
- Ski rope burns.
So no matter what your leisure time activity may be, whether you are water-skiing, fishing or are simply moored, your engine will be kept in pristine condition.
- Yamaha Splash Covers are designed not to cover the tell tail and exhaust ports.
- Splash Covers are designed to be towed at high speeds on the outboard motor.
- Splash Covers are designed to allow access to an internal fuel tank, where fitted.
- Splash Covers are secured with marine grade shock cord that grips the engine just below where the cowling and engine head join.
Engine size: 1.6L
Fitment:
- F75LB
- F90LB
- F90XB
- F100F
**For the older models in which the vent is located at the back of the cowl, please see Y100-4S.
SKU: Y100-418S -
Biminis, Canopies and Boat Covers, Outboard Covers
Yamaha Cowl Cover – Y100-4S for Yamaha 4 Stroke 80-100hp 1.6L Outboards
Biminis, Canopies and Boat Covers, Outboard CoversYamaha Cowl Cover – Y100-4S for Yamaha 4 Stroke 80-100hp 1.6L Outboards
Yamaha Cowl Cover – Y100-4S
Our Yamaha Cowl covers are fully-vented engine covers specifically designed to protect the cowling whilst the engine is running. Our Splash Covers fit like a second skin and are made from felt backed Polysoft marine grade fabric which is waterproof, breathable and UV stable.
Splash Covers are designed to remain on the engine at all times protecting the cowling from:
- UV Fading.
- Accidental knocks and scratches.
- Bird droppings.
- Salt corrosion.
- Lure damage.
- Ski rope burns.
So no matter what your leisure time activity may be, whether you are water-skiing, fishing or are simply moored, your engine will be kept in pristine condition.
- Yamaha Splash Covers are designed not to cover the tell tail and exhaust ports.
- Splash Covers are designed to be towed at high speeds on the outboard motor.
- Splash Covers are designed to allow access to an internal fuel tank, where fitted.
- Splash Covers are secured with marine grade shock cord that grips the engine just below where the cowling and engine head join.
Engine size: 1.6L
Fitment:
- F80A
- F80AET
- F80BET
- F90BET
- F90LA
- F100A
- F100AET
- F100DET
**For the newer models in which the vent is located at the sides of the cowl, please see Y100-418S.
SKU: Y100-4S -
Biminis, Canopies and Boat Covers, Outboard Covers
Yamaha Cowl Cover – Y115-4AS for Yamaha 4 Stroke 115hp 1.7L Outboards
Biminis, Canopies and Boat Covers, Outboard CoversYamaha Cowl Cover – Y115-4AS for Yamaha 4 Stroke 115hp 1.7L Outboards
Yamaha Cowl Cover – Y115-4AS
Our Yamaha Cowl covers are fully-vented engine covers specifically designed to protect the cowling whilst the engine is running. Our Splash Covers fit like a second skin and are made from felt backed Polysoft marine grade fabric which is waterproof, breathable and UV stable.
Splash Covers are designed to remain on the engine at all times protecting the cowling from:
- UV Fading.
- Accidental knocks and scratches.
- Bird droppings.
- Salt corrosion.
- Lure damage.
- Ski rope burns.
So no matter what your leisure time activity may be, whether you are water-skiing, fishing or are simply moored, your engine will be kept in pristine condition.
- Yamaha Splash Covers are designed not to cover the tell tail and exhaust ports.
- Splash Covers are designed to be towed at high speeds on the outboard motor.
- Splash Covers are designed to allow access to an internal fuel tank, where fitted.
- Splash Covers are secured with marine grade shock cord that grips the engine just below where the cowling and engine head join.
Engine size: 1.7L
Fitment: F115AET Yamaha Outboard Motors, 2012 onwards. For earlier models, please see Y115-4S.
SKU: Y115-4AS -
Biminis, Canopies and Boat Covers, Outboard Covers
Yamaha Cowl Cover – Y115-4S for Yamaha 4 Stroke 115hp 1.7L Outboards
Biminis, Canopies and Boat Covers, Outboard CoversYamaha Cowl Cover – Y115-4S for Yamaha 4 Stroke 115hp 1.7L Outboards
Yamaha Cowl Cover – Y115-4S
Our Yamaha Cowl covers are fully-vented engine covers specifically designed to protect the cowling whilst the engine is running. Our Splash Covers fit like a second skin and are made from felt backed Polysoft marine grade fabric which is waterproof, breathable and UV stable.
Splash Covers are designed to remain on the engine at all times protecting the cowling from:
- UV Fading.
- Accidental knocks and scratches.
- Bird droppings.
- Salt corrosion.
- Lure damage.
- Ski rope burns.
So no matter what your leisure time activity may be, whether you are water-skiing, fishing or are simply moored, your engine will be kept in pristine condition.
- Yamaha Splash Covers are designed not to cover the tell tail and exhaust ports.
- Splash Covers are designed to be towed at high speeds on the outboard motor.
- Splash Covers are designed to allow access to an internal fuel tank, where fitted.
- Splash Covers are secured with marine grade shock cord that grips the engine just below where the cowling and engine head join.
Engine size: 1.7L
Fitment: F115AET (Front Vents) Yamaha Outboard Motors, 2011 or earlier. For models 2012 and later, please see Y115-4AS.
SKU: Y115-4S -
Biminis, Canopies and Boat Covers, Outboard Covers
Yamaha Cowl Cover – Y130-4S for Yamaha F115B, F115BET, and F130A Outboards
Biminis, Canopies and Boat Covers, Outboard CoversYamaha Cowl Cover – Y130-4S for Yamaha F115B, F115BET, and F130A Outboards
Yamaha Cowl Cover – Y130-4S
Our Yamaha Cowl covers are fully-vented engine covers specifically designed to protect the cowling whilst the engine is running. Our Splash Covers fit like a second skin and are made from felt backed Polysoft marine grade fabric which is waterproof, breathable and UV stable.
Splash Covers are designed to remain on the engine at all times protecting the cowling from:
- UV Fading
- Accidental knocks and scratches
- Bird droppings
- Salt corrosion
- Lure damage
- Ski rope burns
So no matter what your leisure time activity may be, whether you are water-skiing, fishing or are simply moored, your engine will be kept in pristine condition.
- Yamaha Splash Covers are designed not to cover the tell tail and exhaust ports.
- Splash Covers are designed to be towed at high speeds on the outboard motor.
- Splash Covers are designed to allow access to an internal fuel tank, where fitted.
- Splash Covers are secured with marine grade shock cord that grips the engine just below where the cowling and engine head join.
Engine size: 1.8L
Fitment:
- F115B
- F115BET
- F130A
SKU: Y130-4S -
Biminis, Canopies and Boat Covers, Outboard Covers
Yamaha Cowl Cover – Y150-4S for Yamaha 4 Stroke 150hp 2.7L Outboards
Biminis, Canopies and Boat Covers, Outboard CoversYamaha Cowl Cover – Y150-4S for Yamaha 4 Stroke 150hp 2.7L Outboards
Yamaha Cowl Cover – Y150-4S
Our Yamaha Cowl covers are fully-vented engine covers specifically designed to protect the cowling whilst the engine is running. Our Splash Covers fit like a second skin and are made from felt backed Polysoft marine grade fabric which is waterproof, breathable and UV stable.
Splash Covers are designed to remain on the engine at all times protecting the cowling from:
- UV Fading.
- Accidental knocks and scratches.
- Bird droppings.
- Salt corrosion.
- Lure damage.
- Ski rope burns.
So no matter what your leisure time activity may be, whether you are water-skiing, fishing or are simply moored, your engine will be kept in pristine condition.
- Yamaha Splash Covers are designed not to cover the tell tail and exhaust ports.
- Splash Covers are designed to be towed at high speeds on the outboard motor.
- Splash Covers are designed to allow access to an internal fuel tank, where fitted.
- Splash Covers are secured with marine grade shock cord that grips the engine just below where the cowling and engine head join.
Engine size: 2.7L
Fitment: F150AET, F150BET, F150A, F150XA Yamaha Outboard Motors. 2014 or earlier. For 2.8L models 2015 and later please see Y200-4S.
SKU: Y150-4S -
Biminis, Canopies and Boat Covers, Outboard Covers
Yamaha Cowl Cover – Y200-4-23S for Yamaha 4 Stroke 150-200hp 2.8L Outboards
Biminis, Canopies and Boat Covers, Outboard CoversYamaha Cowl Cover – Y200-4-23S for Yamaha 4 Stroke 150-200hp 2.8L Outboards
Yamaha Cowl Cover – Y200-4-23S
Our Yamaha Cowl covers are fully-vented engine covers specifically designed to protect the cowling whilst the engine is running. Our Splash Covers fit like a second skin and are made from felt backed Polysoft marine grade fabric which is waterproof, breathable and UV stable.
Splash Covers are designed to remain on the engine at all times protecting the cowling from:
- UV Fading
- Accidental knocks and scratches
- Bird droppings
- Salt corrosion
- Lure damage
- Ski rope burns
So no matter what your leisure time activity may be, whether you are water-skiing, fishing or are simply moored, your engine will be kept in pristine condition.
- Yamaha Splash Covers are designed not to cover the tell tail and exhaust ports.
- Splash Covers are designed to be towed at high speeds on the outboard motor.
- Splash Covers are designed to allow access to an internal fuel tank, where fitted.
- Splash Covers are secured with marine grade shock cord that grips the engine just below where the cowling and engine head join.
Colour: Grey. For cover in white, please see Y200-4S-WH.
Engine size: 2.8L
Fitment: F150SA, F150CB, F150C, F175CB, F175B, F200SA, F200CB, F200C Integrated Stearing Yamaha Outboard Motors.
SKU: Y200-4-23S -
Biminis, Canopies and Boat Covers, Outboard Covers
Yamaha Cowl Cover – Y200-4S for Yamaha 4 Stroke 150-200hp 2.8L Outboards
Biminis, Canopies and Boat Covers, Outboard CoversYamaha Cowl Cover – Y200-4S for Yamaha 4 Stroke 150-200hp 2.8L Outboards
Yamaha Cowl Cover – Y200-4S
Our Yamaha Cowl covers are fully-vented engine covers specifically designed to protect the cowling whilst the engine is running. Our Splash Covers fit like a second skin and are made from felt backed Polysoft marine grade fabric which is waterproof, breathable and UV stable.
Splash Covers are designed to remain on the engine at all times protecting the cowling from:
- UV Fading.
- Accidental knocks and scratches.
- Bird droppings.
- Salt corrosion.
- Lure damage.
- Ski rope burns.
So no matter what your leisure time activity may be, whether you are water-skiing, fishing or are simply moored, your engine will be kept in pristine condition.
- Yamaha Splash Covers are designed not to cover the tell tail and exhaust ports.
- Splash Covers are designed to be towed at high speeds on the outboard motor.
- Splash Covers are designed to allow access to an internal fuel tank, where fitted.
- Splash Covers are secured with marine grade shock cord that grips the engine just below where the cowling and engine head join.
Engine size: 2.8L
Fitment: F150B, F150CA (4Cyl), F175A, F175AET, F175CA, F200B, F200CA, F200F, F200G Yamaha Outboard Motors. For 2.7L models 2014 and ealier, please see Y150-4S.
SKU: Y200-4S -
Biminis, Canopies and Boat Covers, Outboard Covers
Yamaha Cowl Cover – Y225-4S for Yamaha 4 Stroke 200-225hp 3.3L Outboards
Biminis, Canopies and Boat Covers, Outboard CoversYamaha Cowl Cover – Y225-4S for Yamaha 4 Stroke 200-225hp 3.3L Outboards
Yamaha Cowl Cover – Y225-4S
Our Yamaha Cowl covers are fully-vented engine covers specifically designed to protect the cowling whilst the engine is running. Our Splash Covers fit like a second skin and are made from felt backed Polysoft marine grade fabric which is waterproof, breathable and UV stable.
Splash Covers are designed to remain on the engine at all times protecting the cowling from:
- UV Fading.
- Accidental knocks and scratches.
- Bird droppings.
- Salt corrosion.
- Lure damage.
- Ski rope burns.
So no matter what your leisure time activity may be, whether you are water-skiing, fishing or are simply moored, your engine will be kept in pristine condition.
- Yamaha Splash Covers are designed not to cover the tell tail and exhaust ports.
- Splash Covers are designed to be towed at high speeds on the outboard motor.
- Splash Covers are designed to allow access to an internal fuel tank, where fitted.
- Splash Covers are secured with marine grade shock cord that grips the engine just below where the cowling and engine head join.
Engine size: 3.3L
Fitment: F200AET (V6), F225AET Yamaha Outboard Motors.
SKU: Y225-4S -
Biminis, Canopies and Boat Covers, Outboard Covers
Yamaha Cowl Cover – Y250-4S for Yamaha 4 Stroke 200-250hp 3.3L Outboards
Biminis, Canopies and Boat Covers, Outboard CoversYamaha Cowl Cover – Y250-4S for Yamaha 4 Stroke 200-250hp 3.3L Outboards
Yamaha Cowl Cover – Y250-4S
Our Yamaha Cowl covers are fully-vented engine covers specifically designed to protect the cowling whilst the engine is running. Our Splash Covers fit like a second skin and are made from felt backed Polysoft marine grade fabric which is waterproof, breathable and UV stable.
Splash Covers are designed to remain on the engine at all times protecting the cowling from:
- UV Fading.
- Accidental knocks and scratches.
- Bird droppings.
- Salt corrosion.
- Lure damage.
- Ski rope burns.
So no matter what your leisure time activity may be, whether you are water-skiing, fishing or are simply moored, your engine will be kept in pristine condition.
- Yamaha Splash Covers are designed not to cover the tell tail and exhaust ports.
- Splash Covers are designed to be towed at high speeds on the outboard motor.
- Splash Covers are designed to allow access to an internal fuel tank, where fitted.
- Splash Covers are secured with marine grade shock cord that grips the engine just below where the cowling and engine head join.
Engine size: 3.3L
Fitment: F200A, F200CET (V6), F250AET, F250B Yamaha Outboard Motors.
SKU: Y250-4S -
Biminis, Canopies and Boat Covers, Outboard Covers
Yamaha Cowl Cover – Y300-4-21S for Yamaha 4 Stroke 225-300hp 4.2L V6 Offshore Outboards
Biminis, Canopies and Boat Covers, Outboard CoversYamaha Cowl Cover – Y300-4-21S for Yamaha 4 Stroke 225-300hp 4.2L V6 Offshore Outboards
Yamaha Cowl Cover – Y300-4S
Our Yamaha Cowl covers are fully-vented engine covers specifically designed to protect the cowling whilst the engine is running. Our Splash Covers fit like a second skin and are made from felt backed Polysoft marine grade fabric which is waterproof, breathable and UV stable.
Splash Covers are designed to remain on the engine at all times protecting the cowling from:
- UV Fading
- Accidental knocks and scratches
- Bird droppings
- Salt corrosion
- Lure damage
- Ski rope burns
So no matter what your leisure time activity may be, whether you are water-skiing, fishing or are simply moored, your engine will be kept in pristine condition.
- Yamaha Splash Covers are designed not to cover the tell tail and exhaust ports.
- Splash Covers are designed to be towed at high speeds on the outboard motor.
- Splash Covers are designed to allow access to an internal fuel tank, where fitted.
- Splash Covers are secured with marine grade shock cord that grips the engine just below where the cowling and engine head join.
Engine size: 4.2L
Fitment: F250CA, F250DET, F225CA, F225FET (V6), F300BET, F300CA, F300SB Yamaha Outboard Motors.
SKU: Y300-4-21S -
Biminis, Canopies and Boat Covers, Outboard Covers
Yamaha Cowl Cover – Y300-4S for Yamaha 4 Stroke 225-300hp 4.2L V6 Outboards
Biminis, Canopies and Boat Covers, Outboard CoversYamaha Cowl Cover – Y300-4S for Yamaha 4 Stroke 225-300hp 4.2L V6 Outboards
Yamaha Cowl Cover – Y300-4S
Our Yamaha Cowl covers are fully-vented engine covers specifically designed to protect the cowling whilst the engine is running. Our Splash Covers fit like a second skin and are made from felt backed Polysoft marine grade fabric which is waterproof, breathable and UV stable.
Splash Covers are designed to remain on the engine at all times protecting the cowling from:
- UV Fading
- Accidental knocks and scratches
- Bird droppings
- Salt corrosion
- Lure damage
- Ski rope burns
So no matter what your leisure time activity may be, whether you are water-skiing, fishing or are simply moored, your engine will be kept in pristine condition.
- Yamaha Splash Covers are designed not to cover the tell tail and exhaust ports.
- Splash Covers are designed to be towed at high speeds on the outboard motor.
- Splash Covers are designed to allow access to an internal fuel tank, where fitted.
- Splash Covers are secured with marine grade shock cord that grips the engine just below where the cowling and engine head join.
Engine size: 4.2L
Fitment: F250CA, F250DET, F225CA, F225FET (V6), F300BET, F300CA, F300SB Yamaha Outboard Motors.
SKU: Y300-4S -
Biminis, Canopies and Boat Covers, Outboard Covers
Yamaha Cowl Cover – Y350-4S for Yamaha 4 Stroke 300-350hp V8 Outboards
Biminis, Canopies and Boat Covers, Outboard CoversYamaha Cowl Cover – Y350-4S for Yamaha 4 Stroke 300-350hp V8 Outboards
Yamaha Cowl Cover – Y350-4S
Our Yamaha Cowl covers are fully-vented engine covers specifically designed to protect the cowling whilst the engine is running. Our Splash Covers fit like a second skin and are made from felt backed Polysoft marine grade fabric which is waterproof, breathable and UV stable.
Splash Covers are designed to remain on the engine at all times protecting the cowling from:
- UV Fading.
- Accidental knocks and scratches.
- Bird droppings.
- Salt corrosion.
- Lure damage.
- Ski rope burns.
So no matter what your leisure time activity may be, whether you are water-skiing, fishing or are simply moored, your engine will be kept in pristine condition.
- Yamaha Splash Covers are designed not to cover the tell tail and exhaust ports.
- Splash Covers are designed to be towed at high speeds on the outboard motor.
- Splash Covers are designed to allow access to an internal fuel tank, where fitted.
- Splash Covers are secured with marine grade shock cord that grips the engine just below where the cowling and engine head join.
Engine size: 5.3L
Fitment: F300AET (V8), F350AET, F350CB, F350CC Yamaha Outboard Motors.
SKU: Y350-4S -
Biminis, Canopies and Boat Covers, Outboard Covers
Yamaha Cowl Cover – Y40-4S for Yamaha F30 and F40 Outboards
Biminis, Canopies and Boat Covers, Outboard CoversYamaha Cowl Cover – Y40-4S for Yamaha F30 and F40 Outboards
Yamaha Cowl Cover – Y40-4S
Our Yamaha Cowl covers are fully-vented engine covers specifically designed to protect the cowling whilst the engine is running. Our Splash Covers fit like a second skin and are made from felt backed Polysoft marine grade fabric which is waterproof, breathable and UV stable.
Splash Covers are designed to remain on the engine at all times protecting the cowling from:
- UV Fading.
- Accidental knocks and scratches.
- Bird droppings.
- Salt corrosion.
- Lure damage.
- Ski rope burns.
So no matter what your leisure time activity may be, whether you are water-skiing, fishing or are simply moored, your engine will be kept in pristine condition.
- Yamaha Splash Covers are designed not to cover the tell tail and exhaust ports.
- Splash Covers are designed to be towed at high speeds on the outboard motor.
- Splash Covers are designed to allow access to an internal fuel tank, where fitted.
- Splash Covers are secured with marine grade shock cord that grips the engine just below where the cowling and engine head join.
Fitment:
- F30A
- F30BEHT
- F30BET
- F40A
- F40FEHD
- F40FEHT
- F40FET
SKU: Y40-4S -
Biminis, Canopies and Boat Covers, Outboard Covers
Yamaha Cowl Cover – Y50-4S for Yamaha F50 Outboards
Biminis, Canopies and Boat Covers, Outboard CoversYamaha Cowl Cover – Y50-4S for Yamaha F50 Outboards
Yamaha Cowl Cover – Y50-4S
Our Yamaha Cowl cover y50-4S is a fully-vented engine cover specifically designed to protect the cowling whilst the engine is running. Our Splash Covers fit like a second skin and are made from felt backed Polysoft marine grade fabric which is waterproof, breathable and UV stable.
Splash Covers are designed to remain on the engine at all times protecting the cowling from:
- UV Fading.
- Accidental knocks and scratches.
- Bird droppings.
- Salt corrosion.
- Lure damage.
- Ski rope burns.
So no matter what your leisure time activity may be, whether you are water-skiing, fishing or are simply moored, your engine will be kept in pristine condition.
- Yamaha Splash Covers are designed not to cover the tell tail and exhaust ports.
- Splash Covers are designed to be towed at high speeds on the outboard motor.
- Splash Covers are designed to allow access to an internal fuel tank, where fitted.
- Splash Covers are secured with marine grade shock cord that grips the engine just below where the cowling and engine head join.
Fitment:
- F50FEHT
- F50FET
SKU: Y50-4S -
Biminis, Canopies and Boat Covers, Outboard Covers
Yamaha Cowl Cover – Y70-4S for Yamaha F50 to F70 Outboards
Biminis, Canopies and Boat Covers, Outboard CoversYamaha Cowl Cover – Y70-4S for Yamaha F50 to F70 Outboards
Yamaha Cowl Cover – Y70-4S
Our Yamaha Cowl covers are fully-vented engine covers specifically designed to protect the cowling whilst the engine is running. Our Splash Covers fit like a second skin and are made from felt backed Polysoft marine grade fabric which is waterproof, breathable and UV stable.
Splash Covers are designed to remain on the engine at all times protecting the cowling from:
- UV Fading
- Accidental knocks and scratches
- Bird droppings
- Salt corrosion
- Lure damage
- Ski rope burns
So no matter what your leisure time activity may be, whether you are water-skiing, fishing or are simply moored, your engine will be kept in pristine condition.
- Yamaha Splash Covers are designed not to cover the tell tail and exhaust ports.
- Splash Covers are designed to be towed at high speeds on the outboard motor.
- Splash Covers are designed to allow access to an internal fuel tank, where fitted.
- Splash Covers are secured with marine grade shock cord that grips the engine just below where the cowling and engine head join.
Engine size: 996cc
Fitment:
- F50B
- F50HET
- F60B
- F60FET
- F70A
- F70AET
- FT60GET
SKU: Y70-4S
