Shop
Showing 3781–3810 of 3863 results
-
Lowrance, Lowrance Sonar & Transducers
XSONIC AIRMAR B285M – Chirp-ready Thru-hull Transducer
AIRMAR B285M – Chirp-ready Thru-hull Transducer
The B285M’s medium frequency delivers the right combination of coverage under the boat, extended depth range, and the ability to produce clean and accurate target and structure returns in mid to deeper water. Medium frequency also provides excellent shallow to mid-depth performance, bottom detail, and fish-target separation. Operating at a frequency range of 85 to 135 kHz, this transducer reveals fish at medium depths up to 457 m (1500′) and gives ultra-clear target resolution.
This model is also ideal for single-channel sounder applications where operating in Chirp mode provides a greater opportunity to see what is in the water column. Simply create pre-sets for 85 and 135 kHz and toggle between wide and narrow beams for scouting an area and then pinpointing structure.
The included High-performance Fairing improves broadband performance at speeds over 30 knots (34 MPH).
SKU: 000-14561-001 -
Lowrance, Lowrance Sonar & Transducers
XSONIC AIRMAR B45 Traditional/CW Thru-hull Transducer
AIRMAR B45 Traditional/CW Thru-hull Transducer
The B45 is Airmar’s smallest and most economical, dual-frequency, bronze, stem transducer. It features a single, 50/200 kHz ceramic element. The included fairing streamlines the transducer and increases the performance—even at higher speeds.
Features:
- Depth and fast-response water-temperature sensing
- 600 W of power
- Dual-frequency element:
- 50 kHz with a wide 45° beamwidth for depth performance to 353 m (1200′)
- 200 kHz with a 12° beamwidth for depth performance to 206 m (700′)
- Excellent performance and sensitivity in a small housing
- Bronze housing with High-performance Fairing for optimal performance at speed
SKU: 000-13946-001 -
Lowrance, Lowrance Sonar & Transducers
XSONIC AIRMAR B744V TRIDUCER® Multisensor/CW Thru-hull Transducer
Lowrance, Lowrance Sonar & TransducersXSONIC AIRMAR B744V TRIDUCER® Multisensor/CW Thru-hull Transducer
The B744V is a TRIDUCER® Multisensor featuring depth, speed, and temperature in a single housing. The 50/200 kHz, dual-frequency, single, ceramic element provides great target detail in shallow water at 200 kHz and good deep-water bottom tracking at 50 kHz. It is also available with a longer stem (B744VL) that may be needed for steep-deadrise vessels or thick cored-fiberglass or wood hulls. The required High-performance Fairing gives excellent results at speeds up to 30 knots (34 MPH).
SKU: 000-14804-001 -
Lowrance, Lowrance Sonar & Transducers
XSONIC AIRMAR CM275LHW – Wide-beam Chirp-ready Cavity Mount Transducer
Lowrance, Lowrance Sonar & TransducersXSONIC AIRMAR CM275LHW – Wide-beam Chirp-ready Cavity Mount Transducer
AIRMAR CM275LHW – Wide-beam Chirp-ready Cavity Mount Transducer
Get more coverage under your boat with Airmar’s unique wide-beam, low and high-frequency, Chirp-ready CM275LHW. The high band operates across a frequency range of 150 to 250 kHz and has a fixed 25° beam for all frequencies which results in superior resolution. The constantly wide beam provides twice the coverage and clear fish arches on the display compared to most high-frequency, narrow-beam transducers.
The high wide is the ideal choice for both inshore and pelagic fishing, where resolution and maximum coverage under the boat are essentially down to 152 m (500′). The low-frequency band and 1 kW of power support great deeper-water performance. And all this is packed into one SEALCAST™ housing. Get the best of both worlds with Airmar’s Chirp-ready transducers with wide-beam coverage.
SKU: 000-13772-001 -
Lowrance, Lowrance Sonar & Transducers
XSONIC AIRMAR CM599LHW – Wide-beam Chirp-ready Cavity Mount Transducer
Lowrance, Lowrance Sonar & TransducersXSONIC AIRMAR CM599LHW – Wide-beam Chirp-ready Cavity Mount Transducer
AIRMAR CM599LHW – Wide-beam Chirp-ready Cavity Mount Transducer
Get more coverage under your boat with Airmar’s unique wide-beam, low and high-frequency, Chirp-ready CM599LHW. The high band operates across a frequency range of 150 to 250 kHz and has a fixed 25° beam for all frequencies which results in superior resolution. The constantly wide beam provides twice the coverage and clear fish arches on the display compared to most high-frequency, narrow-beam transducers.
The high wide is the ideal choice for both inshore and pelagic fishing, where resolution and maximum coverage under the boat is essential down to 152 m (500′). The low-frequency band is rated to 3 kW and produces amazing deep-water performance to 3048 m (10000′). Get the best of both worlds with Airmar’s Chirp-ready transducer with wide-beam coverage.
Features:
- Depth and fast-response water-temperature sensing
- 3 kW of power for exceptional deep-water performance
- 3 kW low frequency: 28 to 60 kHz
- 23° to 9° port-starboard beamwidth
- 11° to 5° fore-aft beamwidth
- Maximum depth of 3048 m (10000′)
- 1 kW high frequency: 150 to 250 kHz
- 25° constant beamwidth
- Maximum depth of 152 m (500′)
- 132 kHz of total bandwidth from one transducer
- Covers popular fishing frequencies of 50 and 200 kHz plus everything else in the bandwidth
- High frequency delivers superior shallow-water performance, bottom detail, and fish-target separation
- High wide beamwidth yields more coverage for detecting fish in the upper-water column
- Resin housing with curved-edge design for wet-box installation
- Designed for custom mounting in a cavity or welded tank
- Also available as a thru-hull external (R509LHW) mount
- Patented Xducer ID® technology
SKU: 000-13941-001 -
Lowrance, Lowrance Sonar & Transducers
XSONIC AIRMAR M260 – Traditional/CW In-hull Transducer
AIRMAR M260 – Traditional/CW In-hull Transducer
The performance of Airmar’s “1 kW, 260 family” of transducers is legendary. The combination of power and sensitivity has made this the high-performing transducer of choice with conventional fishfinders. Operating at 50 and 200 kHz, the narrow, 6° beam at 200 kHz provides excellent target resolution and crisp images of fish holding tight to wrecks and reefs. The 50 kHz is excellent at deep-water detection, and its wide 19° beam yields broad coverage under the boat.
The transducer is installed in the included tank which is cut to the boat’s deadrise angle and affixed inside the hull. When the transducer is placed inside the tank, it is properly oriented for optimal performance. The M260 is a popular choice for customers not wanting to drill a hole in their hull and for trailered or multi-hulled boats.
SKU: 000-13914-001 -
Lowrance Sonar & Transducers, Lowrance
Xsonic Airmar P66 Transducer
The Airmar P66 Multisensor is a 600W transducer that combines depth and temperature functions in one housing. And it features our 50/200 kHz, dual-frequency, ceramic element. This hydrodynamic housing with its rounded nose reduces the turbulence under the transducer’s acoustic face for clear display images. It is Airmar’s best transom mount for boats up to 8 m (25′) long.
SKU: 000-13977-001, 000-13919-001 -
Lowrance, Lowrance Sonar & Transducers
XSONIC AIRMAR PM275LHW – Wide-beam Chirp-ready Pocket Mount Transducer
Lowrance, Lowrance Sonar & TransducersXSONIC AIRMAR PM275LHW – Wide-beam Chirp-ready Pocket Mount Transducer
AIRMAR PM275LHW – Wide-beam Chirp-ready Pocket Mount
Get more coverage under your boat with Airmar’s unique wide-beam, low and high-frequency, Chirp-ready PM275LHW. The high band operates across a frequency range of 150 to 250 kHz and has a fixed 25° beam for all frequencies which results in superior resolution. The constantly wide beam provides twice the coverage and clear fish arches on the display compared to most high-frequency, narrow-beam transducers.
The high wide is the ideal choice for both inshore and pelagic fishing, where resolution and maximum coverage under the boat are essentially down to 152 m (500′). The low-frequency band and 1 kW of power also support great deep-water performance. Get the best of both worlds with Airmar’s Chirp-ready transducer with wide-beam coverage.
SKU: 000-13940-001 -
Lowrance, Lowrance Sonar & Transducers
XSONIC AIRMAR R509LHW – Wide-beam Chirp-ready Thru-hull External Mount Transducer
Lowrance, Lowrance Sonar & TransducersXSONIC AIRMAR R509LHW – Wide-beam Chirp-ready Thru-hull External Mount Transducer
AIRMAR R509LHW – Wide-beam Chirp-ready Thru-hull External Mount
Get more coverage under your boat with Airmar’s unique wide-beam, low and high-frequency, Chirp-ready R509LHW. The high band operates across a frequency range of 150 to 250 kHz and has a fixed 25° beam for all frequencies which results in superior resolution. The constantly wide beam provides twice the coverage and clear fish arches on the display compared to most high-frequency, narrow-beam transducers.
The high wide is the ideal choice for both inshore and pelagic fishing, where resolution and maximum coverage are essential down to 152 m (500′). The low-frequency band is rated to 3 kW and delivers amazing deep-water performance to 3048 m (10000′). Get the best of both worlds with Airmar’s Chirp-ready transducer with wide-beam coverage.
SKU: 000-13773-001 -
Lowrance, Lowrance Sonar & Transducers
XSONIC AIRMAR SS164 – Traditional/CW Tilted Element™ Thru-hull Transducer
Lowrance, Lowrance Sonar & TransducersXSONIC AIRMAR SS164 – Traditional/CW Tilted Element™ Thru-hull Transducer
AIRMAR SS164 – Traditional/CW Tilted Element™ Thru-hull Transducer
Step up to a 1 kW—without a fairing! This 1 kW, flush-mount transducer is perfect for fast, trailered, tournament and sport-fishing vessels that cannot accommodate a High-performance Fairing. The flush-mounted, stainless steel housing extends less than 6.35 mm (1/4″) outside your hull, so it can sit on trailer rollers and bunks. The ceramic arrays are tilted inside the housing, providing the perfect vertical beam with maximum energy on what is directly below the boat.
Available in three Tilted Element models:
- Fixed 20° tilted version for 16 to 24° hull deadrise angles
- Fixed 12° tilted version for 8 to 15° hull deadrise angles
- Fixed 0° tilted version for 0 to 7° hull deadrise angles
SKU: 000-13916-001, 000-13917-001, 000-13918-001 -
Lowrance, Lowrance Sonar & Transducers
XSONIC AIRMAR SS175HW – Wide-beam Chirp-ready Tilted Element™ Thru-hull Transducer
Lowrance, Lowrance Sonar & TransducersXSONIC AIRMAR SS175HW – Wide-beam Chirp-ready Tilted Element™ Thru-hull Transducer
AIRMAR SS175HW – Wide-beam Chirp-ready Tilted Element™ Thru-hull Transducer
Get more coverage under your boat with Airmar’s unique wide-beam, high-frequency, Chirp-ready SS175HW. The high band operates across a frequency range of 150 to 250 kHz and has a fixed 25° beam for all frequencies. The high-frequency band delivers superior shallow-water performance, bottom detail, and fish-target separation. The constantly wide beam provides twice the coverage for detecting fish in the upper-water column and clear fish arches on the display compared to most high-frequency, narrow-beam transducers. The high wide is the ideal choice for both inshore and pelagic fishing, where resolution and maximum coverage under the boat are essential down to 152 m (500′).
Tilted Element™ transducers have the element fixed at either a 20°, 12°, or 0° angle within the housing. Because the transducer is installed almost flush to the hull, the tilt corrects for the hull deadrise. It orients the ceramic element horizontally to ensure maximum echo returns to the transducer.
The SS175HW is available in three Tilted Element models:
- Fixed 20° tilted version for 16 to 24° hull deadrise angles
- Fixed 12° tilted version for 8 to 15° hull deadrise angles
- Fixed 0° tilted version for 0 to 7° hull deadrise angles
SKU: 000-13780-001, 000-13781-001, 000-13782-001 -
Lowrance, Lowrance Sonar & Transducers
XSONIC AIRMAR SS175L Chirp-ready Tilted Element Thru-hull Transducer
Lowrance, Lowrance Sonar & TransducersXSONIC AIRMAR SS175L Chirp-ready Tilted Element Thru-hull Transducer
AIRMAR SS175L Chirp-ready Tilted Element Thru-hull Transducer
Airmar’s low-profile, Chirp-ready, transducer models are the perfect addition to smaller boats such as center consoles. The low-frequency band, operating between 40 and 60 kHz, is a deep-water performer, giving excellent coverage and tracking. The SS175L transducer delivers up to 20 kHz of total bandwidth in just one installation.
Tilted Element™ transducers have the ceramic element fixed at a 20°, 12°, or 0° angle within the housing. When the transducer is installed almost flush to the hull, the tilt of the element corrects for the hull deadrise, orienting the beam directly down. This ensures maximum echo returns to the transducer for more accurate depth readings.
The SS175L is available in three Tilted Element models:
- Fixed 20° tilted version for 16 to 24° hull deadrise angles
- Fixed 12° tilted version for 8 to 15° hull deadrise angles
- Fixed 0° tilted version for 0 to 7° hull deadrise angles
SKU: 000-13774-001, 000-13775-001, 000-13776-001 -
Lowrance, Lowrance Sonar & Transducers
XSONIC AIRMAR SS175M – Chirp-ready Tilted Element Thru-hull Transducer
Lowrance, Lowrance Sonar & TransducersXSONIC AIRMAR SS175M – Chirp-ready Tilted Element Thru-hull Transducer
AIRMAR SS175M – Chirp-ready Tilted Element Thru-hull Transducer
The SS175M’s medium frequency delivers the right combination of coverage under the boat, extended depth range, and the ability to produce clean and accurate target and structure returns in mid to deeper water. Medium frequency also provides excellent shallow to mid-depth performance, bottom detail, and fish-target separation. Operating at a frequency range of 85 to 135 kHz, this transducer reveals fish at medium depths of up to 457 m (1500′) and delivers ultra-clear target resolution.
Airmar’s Tilted Element™ transducers have the element fixed at a 20°, 12°, or 0° angle within the housing. Because the transducer is installed almost flush to the hull, the tilt corrects for the hull deadrise. It orients the ceramic element horizontally to ensure maximum echo returns to the transducer.
The SS175M is available in three Tilted Element models:
- Fixed 20° tilted version for 16 to 24° hull deadrise angles
- Fixed 12° tilted version for 8 to 15° hull deadrise angles
- Fixed 0° tilted version for 0 to 7° hull deadrise angles
SKU: 000-13777-001, 000-13778-001, 000-13779-001 -
Lowrance, Lowrance Sonar & Transducers
XSONIC AIRMAR SS260 – Traditional/CW Thru-hull Transducer
AIRMAR SS260 – Traditional/CW Thru-hull Transducer
The performance of Airmar’s “1 kW, 260 family” of transducers is legendary. The combination of power and sensitivity has made this the high-performing transducer of choice with conventional fishfinders. Operating at 50 and 200 kHz, the narrow, 6° beam at 200 kHz provides excellent target resolution and crisp images of fish holding tight to wrecks and reefs. The 50 kHz is excellent at deep-water detection, and its wide, 19° beam yields broad coverage under the boat.
SS260 features a stainless steel housing which is compatible with all hull materials. Installed with the included, custom-fitting, High-performance Fairing, the SS260 gives excellent results at speeds up to 30 knots (34 MPH).
SKU: 000-13783-001 -
Lowrance, Lowrance Sonar & Transducers
XSONIC AIRMAR SS60 – Traditional/CW Tilted Element™ Thru-hull Transducer
Lowrance, Lowrance Sonar & TransducersXSONIC AIRMAR SS60 – Traditional/CW Tilted Element™ Thru-hull Transducer
AIRMAR SS60 – Traditional/CW Tilted Element™ Thru-hull Transducer
The SS60 is a 600 W, 50/200 kHz transducer which integrates Airmar’s popular, Tilted Element™ feature. This Tilted Element transducer has the ceramic element fixed at a 20° or 12° angle within the housing. When the transducer is installed almost flush to the hull, the tilt of the element corrects for the hull deadrise. By orienting the beam directly down, it ensures maximum echo returns to the transducer and more accurate depth readings.
Available in three Tilted Element models:
- Fixed 20° tilted version for 16 to 24° hull deadrise angles
- Fixed 12° tilted version for 8 to 15° hull deadrise angles
SKU: 000-13911-001, 000-13912-001, 000-13913-001-1 -
Lowrance, Lowrance Sonar & Transducers
XSONIC AIRMAR SS75H Chirp-ready Tilted Element Thru-hull Transducer
Lowrance, Lowrance Sonar & TransducersXSONIC AIRMAR SS75H Chirp-ready Tilted Element Thru-hull Transducer
AIRMAR SS75H Chirp-ready Tilted Element Thru-hull Transducer
Airmar’s low-profile, Chirp-ready, transducer models are the perfect addition to smaller boats such as center consoles. The high-frequency band has a narrow beamwidth, excellent for pinpointing fish holding tight to wrecks, reefs, and other structure. High frequency also shows amazing target separation on baitfish and schooling gamefish. The SS75H transducer, operating at 130 to 210 kHz, delivers up to 80 kHz of total bandwidth in just one installation for outstanding bottom detail and fish-target resolution.
Tilted Element™ transducers have the element fixed at a 20°, 12°, or 0° angle within the housing. Because the transducer is installed almost flush to the hull, the tilt corrects for the hull deadrise. It orients the ceramic element horizontally to ensure maximum echo returns to the transducer.
The SS75H is available in three Tilted Element models:
- Fixed 20° tilted version for 16 to 24° hull deadrise angles
- Fixed 12° tilted version for 6 to 15° hull deadrise angles
- Fixed 0° tilted version for 0 to 7° hull deadrise angles
SKU: 000-13911-001, 000-13912-001, 000-13913-001 -
Lowrance, Lowrance Sonar & Transducers
XSONIC AIRMAR SS75M Chirp-ready Tilted Element Thru-hull Transducer
Lowrance, Lowrance Sonar & TransducersXSONIC AIRMAR SS75M Chirp-ready Tilted Element Thru-hull Transducer
AIRMAR SS75M Chirp-ready Tilted Element Thru-hull Transducer
Airmar’s low profile Chirp-ready transducer models are the perfect addition to smaller boats such as center consoles. The SS75M delivers up to 50 kHz of total bandwidth in just one installation. With a range of 80 to 130 kHz, it shows amazing bottom detail in shallow and medium depths down to 274 m (900′).
Tilted Element™ transducers have the element fixed at a 20°, 12°, or 0° angle within the housing. When the transducer is installed almost flush to the hull, the tilt of the element corrects for the hull deadrise, orienting the beam directly down. This ensures maximum echo returns to the transducer for more accurate depth readings.
The SS75M is available in three Tilted Element models:
- Fixed 20° tilted version for 16 to 24° hull deadrise angles
- Fixed 12° tilted version for 6 to 15° hull deadrise angles
- Fixed 0° tilted version for 0 to 7° hull deadrise angles
SKU: 000-13908-001, 000-13909-001, 000-13910-001 -
Lowrance, Lowrance Sonar & Transducers
XSONIC AIRMAR TM150M Chirp-ready Transom Mount Transducer
AIRMAR TM150M Chirp-ready Transom Mount Transducer
Airmar’s TM150M delivers a great combination of shallow and mid-depth performance. Operating at a frequency range of 95 to 155 kHz, this transducer reveals fish in shallow waters and deeper depths down to 183 m (600′) with ultra-clear target resolution. Narrow beam angles are perfect for detecting fish holding close to structures and suspended fish—ideal for freshwater, inshore, or coastal fishing in shallow to medium depths. The TM150M is an excellent choice for freshwater and saltwater boats up to 8 m (25′).
SKU: 000-13944-001 -
Lowrance Sonar & Transducers, Lowrance
Xsonic Airmar TM165HW Transducer
Maximize the coverage under your boat and see what you’ve been missing. The Airmar TM165HW is a 600W transducer that features a high-frequency range of 150 to 250 kHz and a super-wide beamwidth, averaging 30°, providing maximum coverage across the frequency band. In addition to improving the performance of Chirp-capable fishfinders, anglers using this new wide-beam transducer will achieve three times the coverage compared to standard high-frequency Chirp-ready transducers.
Wide beamwidth, together with the high-frequency range, provides vast bottom coverage and precise fish detection in the upper-water column that can sometimes go unseen with narrow-beam transducers. Airmar’s new wide-beam format also creates crisper and larger return images on the display.
SKU: 000-15482-001 -
Lowrance, Lowrance Sonar & Transducers
XSONIC AIRMAR TM185HW Chirp-ready Transom Mount Transducer
AIRMAR TM185HW Chirp-ready Transom Mount Transducer
Get more coverage under your boat with Airmar’s unique, wide-beam, high-frequency, Chirp-ready TM185HW. The high-frequency band operates across a range of 150 to 250 kHz and has a fixed 25° beam. The high-frequency band yields superior shallow-water performance, bottom detail, and fish-target separation. The constantly wide beam provides twice the coverage for detecting fish in the upper-water column and clear fish arches on the display compared to most high-frequency, narrow-beam transducers. The high wide is the ideal choice for both inshore and pelagic fishing, where resolution and maximum coverage are essential down to 152 m (500′).
SKU: 000-13914-001-1 -
Lowrance, Lowrance Sonar & Transducers
Xsonic Airmar TM185M – Chirp-ready Transom Mount Transducer
-6%
Lowrance, Lowrance Sonar & TransducersXsonic Airmar TM185M – Chirp-ready Transom Mount Transducer
Airmar TM185M – Chirp-ready Transom Mount Transducer
Airmar’s TM185M is a transom-mounted, Chirp-ready transducer designed for offshore fishing and freshwater anglers spending their time in shallow to mid-range depths. The medium frequency delivers the right combination of coverage under the boat, extended depth range, and the ability to produce clean and accurate target and structure returns in mid to deeper water. Medium frequency also provides excellent shallow to mid-depth performance, bottom detail, and fish-target separation. Operating at a frequency range of 85 to 135 kHz, this transducer reveals fish at medium depths down to 457 m (1500′) and gives ultra-clear target resolution.
SKU: 000-13998-001 -
Transducers
Xsonic Airmar TM260 – Traditional/CW Transom Mount Transducer
The Airmar TM260 is a 1kW transducer that comes with a rugged stainless-steel mounting bracket that is easy to install and has a streamlined shape. The performance of Airmar’s “1 kW, 260 family” of transducers is legendary. The combination of power and sensitivity has made this the high-performing transducer of choice with conventional fishfinders. Operating at 50 and 200 kHz, the narrow, 6° beam at 200 kHz provides excellent target resolution and crisp images of fish holding tight to wrecks and reefs. The 50 kHz is excellent at deep-water detection, and the wide, 19° beam yields broad coverage under the boat.
SKU: 000-13904-001 -
Lowrance, Lowrance Sonar & Transducers
Xsonic Airmar TM275LHW Transducer
Get more coverage under your boat with Airmar’s unique wide-beam, low and high-frequency, Chirp-ready Airmar TM275LHW. The high band operates across a frequency range of 150 to 250 kHz and has a fixed 25° beam for all frequencies which results in superior resolution. The constantly wide beam provides twice the coverage and clear fish arches on the display compared to most high-frequency, narrow-beam transducers.
The high wide is the ideal choice for both inshore and pelagic fishing, where resolution and maximum coverage are essential down to 152 m (500′). The low-frequency band and 1 kW of power also support great deep-water performance. Get the best of both worlds with Airmar’s Chirp-ready transducer with wide-beam coverage.
SKU: 000-13770-001 -
Lowrance, Lowrance Accessories, Simrad, Simrad Accessories
xSonic Pigtail Transducer Wiring Block Adapter
Lowrance, Lowrance Accessories, Simrad, Simrad AccessoriesxSonic Pigtail Transducer Wiring Block Adapter
xSonic Pigtail Transducer Wiring Block Adapter
The xSonic Pigtail Transducer Wiring Block Adapter allows you to connect a transducer without a connector (bare wires) to a display requiring a xSonic (9-pin) connection.
SKU: 000-13262-001 -
Boating Accessories, Rod Holders
XXX Marine – Tournament Series G-Clamp Rod Holder (RHP300)
XXX Marine – Tournament Series G-Clamp Rod Holder (RHP300)
Ideal for use on boats (clamp to boat side), piers, kayaks etc. Corrosion resistant anodised and polished silver aluminum tube. 360° rotation and with fully adjustable rod angle. Turns through 12 rest position.
Features:
G Clamp mount made from aluminum with 304 stainless steel pressure screw. For boat sides up to 70mm thick.
Rod holder tube length: 280mm
Rod holder tube inner diameter: 41mmSKU: Tournament Series G-Clamp Rod Holder (RHP300) -
Boating Accessories, Rod Holders
XXX Marine – Tournament Series Rail Mount Rod Holder (RHP200)
XXX Marine – Tournament Series G-Clamp Rod Holder (RHP300)
Tournament series rail mount fishing rod holder. Corrosion resistant anodised and polished silver aluminum tube with super tough reinforced engineering grade nylon fittings and 304 stainless steel screws.
Rail mount fits the following diameters:
– 22.2mm (7/8 Inch) round tube
– 25.4mm (1 Inch) round tube
– 31.75mm (1-1/4 Inch) square tube
Rod holder tube length: 280mm
Rod holder tube inner diameter: 41mmSKU: Tournament Series Rail Mount Rod Holder (RHP200) -
Boating Accessories, Rod Holders
XXX Marine Adjustable Rod Holder with Multi-Position Mount
XXX Marine Adjustable Rod Holder with Multi-Position Mount
The XXX Marine RH100 Rod Holder has 3 mounting options. It can be surface-mounted or side mounted or rail mounted. With 12 rest positions and 360° rotation and with a fully adjustable rod angle this rod holder.
Features:
- Fitted with a rod swivel lock for keeping your fishing rod safe while trolling
- Made from UV-Resistant polypropylene plastic (PP)
- Supplied With 4 x Nut and Bolt Set
SKU: BBB-SHRRH100 -
Berley Mincers, Boating Accessories, Fishing Gear
XXX Marine Berley Mincer – Clamp On
XXX Marine Berley Mincer – Clamp On
Heavy duty cast aluminium with mincer with large sprew and removable steel die. Easy mount G-clamp system. Various dies and sausage ends available.
- Mincer made from solid cast aluminum construction
- Sturdy G clamp with grips for maximum stability (Simply clamps to the any flat surface of up to 45mm thickness)
- Cutting plate hole diameter: 12mm
- Extrusion opening: 95 – 110mm
- Medium/Coarse grinding plate (12mm holes)
- Maximum bench thickness: 45mm
SKU: BBB-SHRMM12 -
Berley Mincers, Boating Accessories, Fishing Gear
XXX Marine Berley Mincer – Large
XXX Marine Berley Mincer – Large
Large heavy duty cast aluminium with large sprew and removable steel die. Permanent mounting. Various dies and sausage ends available.
Prepare your own burley sausage and all your other favorite ground or minced burley with this quality grinder.
- Size: 300 L, 115 W, 200 H mm from the table top.
- Wheel diameter: 280mm
- Extrusion opening: 130 – 140mm
- Medium/Coarse grinding plate (12mm holes)
- Mincer made from solid cast aluminum construction
- Sturdy 4 foot design provides stability
- Handle for manual use (Parts for automatic system must be purchased separately)
- Cutting plate hole diameter: 12mm
SKU: BBB-SHRMM32
