Shop
Showing 3781–3810 of 3901 results
-
Marine Care
West System Hardener – 206 Slow
West System Hardener – 206 Slow
• H206 Slow Hardener is used when extended working and cure time is needed, or to provide adequate working time at higher temperatures.
• Mix ratio 1 part hardener, 5 parts resin.SKU HARDENER MIX WITH 105 RESIN (5:1 RATIO) SAW-321076 
100ml 500ml SAW-321084 
200ml 1 litre SAW-321096 
800ml 4 litre SAW-321112 
4 litre 20 litre SKU: SAW-321076, SAW-321084, SAW-321096, SAW-321112 -
Marine Care
West System Hardener – 207 Special Clear
West System Hardener – 207 Special Clear
• H207 Special Clear Hardener has been specifically developed for coating applications where moisture resistant, natural wood finish is desired. An uLtraviolet inhibiting additive improves resistance of a R105/H207 mixture to sunlight.
• H207 also works well in humid conditions.
• Mix ratio 1 part hardener, 3 parts resin.SKU HARDENER MIX WITH 105 RESIN (3:1 RATIO) SAW-321087 
160ml 500ml SAW-321088 
330ml 1 litre SAW-321100 
1.33 litre 4 litre SAW-321114 
6.7 litre 20 litre SKU: SAW-321087, SAW-321088, SAW-321100, SAW-321114 -
Marine Care
West System Hardener – 209 Super Slow
West System Hardener – 209 Super Slow
• H209 Super Slow Hardener is formulated for general coating and bonding applications in extremely warm and/or humid conditions, or when extended working time is desired at room temperature.
• H209 Super Slow provides approximately twice the working time of H206 Slow.
• Mix ratio 1 part hardener, 3 parts resin.SKU HARDENER MIX WITH 105 RESIN (3:1 RATIO) SAW-321086 
160ml 500ml SAW-321089 
330ml 1 litre SAW-321104 
1.33 litre 4 litre SAW-321113 
6.7 litre 20 litre SKU: SAW-321086, SAW-321089, SAW-321104, SAW-321113 -
Marine Care
West System Low Density Fairing Filler 417
West System Low Density Fairing Filler 417
• A low density microballoonbased filler used as a thickening agent with epoxy fairing systems to make fairing putties that are easy to sand or carve.
• 417 has a reasonably strong strength to weight ratio, and is recommended as the preferred filler under dark coloured surfaces.Part No. SSAW-321244 
Type 417 Low Density Fairing Filler Size 4Ltr SKU: SAW-321244 -
Marine Care
West System Microfibre Blend 413
West System Microfibre Blend 413
• A high density filler used to create a multi-purpose, high strength adhesive used for structural applications like bonding, filleting and hardware bonding, while retaining excellent wetting and penetrating capabilities.
• As a blended filler, 413 Microfibre Blend, offers an added degree of thixotropy and substantially improved spreading and working properties.SKU Size SAW-321234 
4 litre SAW-321238 12 litre SAW-321242 20 litre SKU: SAW-321234, SAW-321238, SAW-321242 -
Marine Care
West System Microlight 410
West System Microlight 410
• The ideal low-density filler for creating a light, easily-worked fairing compound especially suited for cosmetic or surface applications like shaping, filling or fairing.
• Mixes to a very smooth creamy texture that can be trowelled to a feather edge, and is less porous than other filling compounds.SKU Size SAW-321250 
4 litre SAW-321254 12 litre SAW-321258 20 litre SKU: SAW-321250, SAW-321254, SAW-321258 -
Marine Care
West System Microsphere Blend 411
West System Microsphere Blend 411
• 411 Microsphere Blend is a low density filler which cures to a lightweight filling putty with excellent filleting characteristics.
• Also used as a low density adhesive for edge gluing in strip plank construction.SKU Size SAW-321266 4 litre SAW-321270 12 litre SAW-321274 20 litre SKU: SAW-321266, SAW-321270, SAW-321274 -
Boating Accessories, Hatches and Ports
Whale Watertight Locker Doors – Polypropylene
Whale Watertight Locker Doors – Polypropylene
Locker doors provide a reliable watertight seal. Raised screw down lid. Easy to open via the maximum diameter external grip. Moulded from black polypropylene with a choice of black or clear lid. Wide caulking flange enhances waterproofing.
BLA CODELID COLOUROUTSIDE DIA. MMINSIDE DIA. MMMOUNT SCREWS MM174240 
Black 235 180 5 r/h 174242 
Clear 235 180 5 r/h SKU: 174240, 174242 -
Pumps and Plumbing
Whale® High Flow Submersible Pump – 15.8LPM 12V (133104)
Whale® High Flow Submersible Pump – 15.8LPM 12V (133104)
High flow submersible centrifugal electric pump. This pump features a self bleed valve that allows any air trapped in the pump to escape for greater pumping efficiency. A built in strainer incorporated in the base prevents suspended particles from entering the system. Suitable for fresh water, saltwater and diesel transfer. Constructed from ABS plastic, stainless steel and nitrile rubber. For connection to System 15 use adaptor 136638. 12 volt, 3.8 amp with 15.8 l/m
capacity at open flow. One year warranty.Features :
BLA Code: 133104
Hose Size: 13.2
mm-10
in-2/2
Length mm : 160
Overall Dia. mm : 39SKU: 133104 -
Pumps and Plumbing
Whale® In-line Electric Pump – 13.2LPM 12V (133106)
Whale® In-line Electric Pump – 13.2LPM 12V (133106)
Designed for confined spaces, these pumps can be fitted below a water tank and gravity-primed, or above the water tank with a manual priming pump. Can be fitted in-line with a submersible pump to boost the performance when higher pressure for a shower/water heater is needed. Constructed from ABS plastic, stainless steel and nitrile rubber. Suitable for diesel, fresh water or saltwater. For connection to system 15 adaptor use 136638. One year warranty.
Features :
BLA Code : 133106
Capacity Open Flow l/m : 13.2
Power:
v-12
amp-3.6
Hose Size:
mm-10
in-3⁄8
Length mm : 144
Overall Dia.mm : 36SKU: 133106 -
Pumps and Plumbing
Whale® Premium Submersible Pump – 13.2LPM 12V (133102)
Whale® Premium Submersible Pump – 13.2LPM 12V (133102)
A compact, highly efficient centrifugal pump with high performance. Designed to be dropped into a water tank or container, this submersible pump has a built-in strainer to prevent suspended particles from entering the system. Suitable for fresh water, saltwater and diesel transfer. Constructed from ABS plastic, stainless steel and nitrile rubber. Suitable for use with 3⁄8″ or ½” I.D. hose. For connection to system 15 use adaptor 136638. One year warranty.
Features :
BLA Code : 133102
Cap Open Flow l/m : 13.2
Power:
v-12
amp-3.6
Length mm : 117
Overall Dia. mm : 36SKU: 133102 -
Boating Accessories
White Nylon Scupper Valve (45486)
White Nylon Scupper Valve (45486)
• Made from white nylon material with a rubber flap valve that opens to let water out then seals back to prevent water entering.
• Supplied with stainless steel screws.Features:
Part No.: 45486
Description: White Nylon Scupper Valve
Diameter (mm): 70
Mount Holes (mm): 4 x 3SKU: 45486 -
Boating Accessories
White Plastic Deck Vent (30540)
White Plastic Deck Vent (30540)
• 2 part vent, base has a 70mm hole
• Designed to drain away any rain or sea water that flows in with air intake for a
cabin, engine room etcFeatures:
Part No: 30540
Description: White Plastic Cowl Vent
Length (mm): 193
Width (mm): 149
Height (mm): 105
Mount Hole: 4 x 5mmSKU: 30540 -
-
Boating Accessories
White PVC Access Hatches – 375 x 275mm (38200)
White PVC Access Hatches – 375 x 275mm (38200)
• Will not fade or go yellow/brown with age.
• Italian made quality.Features:
Part No:38200
Description:Small Access Hatch
Over all Size(mm):375×275
Cut Out(mm):295×200
Mounting Holes:10x 4mm
Lock:NoSKU: 38200 -
Boating Accessories
White PVC Access Hatches Round with Removable Lid – 315mm Diameter (38240)
White PVC Access Hatches Round with Removable Lid – 315mm Diameter (38240)
• Will not fade or go yellow/brown with age.
• Italian made quality.Features:
Part No: 38240
Description: Round Access Hatch – Removable Lid
Over all Size(mm): 315
Cut Out(mm): 265
Mounting Holes: 6 x 4mm
Lock: NoSKU: 38240 -
Boating Accessories
White PVC Access Hatches with Lock – 375 x 275mm (38202)
White PVC Access Hatches with Lock – 375 x 275mm (38202)
• Will not fade or go yellow/brown with age.
• Italian made quality.Features:
Part No:38202
Description:Small Access Hatch – with Lock
Over all Size(mm):375×275
Cut Out(mm):295×200
Mounting Holes:10x 4mm
Lock:YesSKU: 38202
