Stainless Steel Waste Deck Outlet with Key (29640) Subtotal: $54.30
Shop
Showing 3391–3420 of 3735 results
-
Boating Accessories, Ladders
Stainless Steel Telescopic 3 Step Boarding Ladder – 180mm Leg (47262)
Stainless Steel Telescopic 3 Step Boarding Ladder – 180mm Leg (47262)
• Fold down telescopic boarding ladder for mounting on horizontal surfaces.
• 38mm x 254mm centres.
• Compact design.Features:
Part No: 47262
Description: Stainless Steel Telescopic 3 Step Boarding Ladder
Length (mm): 900
Width (mm): 305
Length Closed (mm): 381
Mount Leg Length (mm): 180SKU: 47262 -
Boating Accessories
Stainless Steel Thru – Deck Burley Bucket (49910)
Stainless Steel Thru – Deck Burley Bucket (49910)
• This high quality 316G stainless steel burley bucket will withstand the toughest
of fishing environments. Manufactured of 2 mm thick tube and a solid 22mm
wide, 3mm thick flange all in 316G.
• The right amount of holes lets the perfect amount of burley into the ocean,
landing you the biggest fish.
• Measures 320 mm above flange and 170mm below.
• Bolt Hole Size: 6mm.
• Burley Release Hole Size: 8mm.Features:
Part No:49910
Description:Stainless Steel Burley Bucket
O/A Height(mm):490
Ø(mm):125SKU: 49910 -
Boating Accessories
Stainless Steel Waste Deck Outlet with Key (29640)
Stainless Steel Waste Deck Outlet with Key (29640)
• Flush mount.
• Chain to retain cap.
• Key.
• 3 x 5mm countersunk mounting holes.
• 316G stainless steel.Features:
Part No.: 29640
Description: Stainless Steel Waste Deck Filler with Key
Tail Diameter (mm): 38SKU: 29640 -
Marine Toilets, Pumps and Plumbing
Standard Electrical Toilet – Large Bowl 12V (139106)
Standard Electrical Toilet – Large Bowl 12V (139106)
Available in small and large bowl sizing. Now with protective motor cover.
Features :
BLA Code: 139106
Bowl Size: Large
Power:
v-12
amp-20
Width mm: 365
Height mm: 380
Front To Back mm: 490
Inlet mm: 25
Outlet mm: 25
Mount Holes mm: 10 r/hSKU: 139106 -
Boating Accessories
Standard Plastic Bathyscopes (70102)
Standard Plastic Bathyscopes (70102)
- High quality heavy duty orange plastic construction with an all-round handle and soft flexible rubber face seal.
- Separates into pieces that fit inside each other for easy storage.
- Assembled size: Height 510mm x Largest Diameter 360mm.
Features:
Part No.: 70102
Viewer: 2 Piece
Height (mm): 480
Lens Diameter (mm): 300
Handle Diameter (mm): 345
Colour: OrangeSKU: 70102 -
12V Accessories, Electrical
Standard Wiper (116042)
Standard Wiper (116042)
Sweep angle 110º, self parking motor with stainless steel cover. 12 volt. Complete with adjustable stainless steel arm and 280mm blade. Arm length 200mm – 305mm. Replacement blades and arms are available as listed.
Features:
BLA Code: 116042
Motor Width mm: 102
Motor Height mm: 57
Motor Length mm: 85
Overall Length mm: 141
Mount Shaft mm: 30×9SKU: 116042 -
Marine Care
Star brite AQUA Water Tank & System Flush
Star brite AQUA Water Tank & System Flush
Cleans and deodorizes fresh water holding tanks and supply systems.
Features
- Excellent for use after storage or winterization to completely flush system
- Use periodically to prevent foul taste and odors.
- One gallon treats 100 gallons of tank capacity.
Directions
1) Remove all water from tank and system by turning on water pump, opening tank drain valves and opening all faucets and shower heads. 2) After system has fully drained, turn off water pump, close all valves and faucets and shower heads. 3) Add fresh water to tank to fill it approximately 1/2 full. 4) Add appropriate amount of AQUA Water Tank & System Flush required for full tank capacity (1 gallon for each 100 gallons of tank capacity). 5) Add fresh water until tank is full. 6) Move boat or RV several times in order to disperse Water Tank & System Flush throughout water. 7) Turn on water pump and open all faucets and shower heads, keeping them open and flowing for about 3 minutes. 8) Close all faucets and shower heads and turn off water pump. 9) Allow the treated water to remain in the system for approximately 30 minutes, then turn on the water pump and open all fixtures, allowing them to flow freely for about 3 minutes before closing them and turning off the water pump. 10) Open the tank drain valves to completely drain the tank, which will now be clean and deodorized. 11) Close the valve and fill the tank with fresh water. 12) Turn on water pump and open all water fixtures to allow water to flow freely for a few minutes to remove Water Tank & System Flush from water lines. To prevent water from picking up taste or smell from tank walls or pipes, use AQUA Water System Conditioner. To maintain water quality, treat it with AQUA Water Treatment & Freshener every time you add water to the tank.
SKU: BLA-265600 -
Marine Care
Star brite Golden Teak Oil – Premium
Star brite Golden Teak Oil – Premium
Star brite Premium Golden Teak Oil is the finest sealer/preserver/finish for marine teak and other fine woods. Star brite uses premium natural oils that are ultra-refined and chemically modified to form high molecular weight polymers that withstand long-term exposure to salt water and harsh weather. Special high-technology additives are blended in to protect the wood from the sun’s damaging UV rays. The result is the ultimate treatment for maximum protection and beauty of teak surfaces. Ideal for use on all fine woods and wood furniture.
Features
- Extra long lasting protection for teak.
- Gives teak a natural warm golden color.
- Easy to use, fast drying.
- Contains ultraviolet absorbers to resist weathering.
- Lasts 4 to 6 times longer than standard teak oils.
- Advanced tung oil polymer formula.
- Sealer/Preserver/Finish for Marine Teak
- Also ideal for use on teak furniture and other fine woods
- Ultra-refined oil, polymers and UV inhibitors provide long-lasting protection and beauty
- Enhances the natural wood grain and color of teak
- Brings out the natural beauty of all fine woods
- Delivers a professional-grade finish, even by first-time users
- Penetrates deep into teak and contains UV inhibitors to protect against Sun’s drying effects
- Easy to apply; Dries quickly
Directions
If wood is dirty and/or weathered, first treat it with Star brite Premium Teak Cleaner and Star brite Premium Teak Brightener. Apply to dry teak surfaces using a clean cloth, sponge or brush. Apply by working in the direction of wood grain to maximize penetration of oil into wood. Wait 5 minutes before wiping treated area with a clean cloth to remove excess oil. Apply a second coat only if wood is extremely porous. Reapply Star brite Premium Golden Teak Oil at the first sign of weathering.
SKU SIZE BLA-265669 473ml BLA-265670 
946ml BLA-265668 
3.78 litre Teak Wood Restoration with Star Brite Teak Oil Care Kit
SKU: BLA-265669, BLA-265670, BLA-265668 -
Marine Care
Star brite Hull Cleaner 946ml
Star brite Hull Cleaner 946ml
The Star brite Hull Cleaner powerful formula designed to remove tough stains and ground in dirt, even on porous surfaces. Quickly removes dirt and stains from the waterline as well as scum lines and stains on hulls. Safe for fibreglass, metal and painted surfaces. No scrubbing or rubbing. Does not contain harmfull acids meaning it is safe and easy to use. 946ml bottle.
Instant Hull Cleaner is formulated to begin working on contact to remove unsightly waterline stains. It is also very effective at removing rust stains or leaf stains from fiberglass or painted surfaces. It will not harm the surface being cleaned and is an ideal preparation for polishing the hull.
Features
- Easy to use
- Quickly removes stains from water line
- Excellent for use on fiberglass, metal and painted surfaces
- Cleans scum lines and stains on boat hulls easily and effortlessly
- Safe for use on fiberglass and painted surfaces
- Instantly removes stains from rust, scum lines, fish blood etc.
- No rubbing or scrubbing
Directions
Shake well. Apply using sponge or sprayer. Use of rubber gloves is recommended. Allow to remain on surface for 2 minutes then rinse with fresh water. Severely stained or dirty surfaces may require second application. For best results, use when temperature is over 50°F. To shine and protect newly cleaned hull, apply any of Star brite’s Marine Polishes.
Remove Boat Hull Stains with Star Brite Instant Hull Cleaner
SKU: EJM-513200 -
Marine Care
Star brite Premium Marine Polish 478ml
Star brite Premium Marine Polish 478ml
The Star brite Premium Marine Polish is simply the best polish you can buy. The special polymer coating provides unmatched protection against UV rays, seal the surface to repel stains and deliver a deep, long-lasting gloss. Application is simple, whether by hand or with a buffer; apply, let dry to a haze and wipe off. Use once per year to keep new and restored boats looking their best. Ideal for all fiberglass, metal, glass or painted surfaces. Note: if surface is oxidized or hazy, use One Step Heavy Duty Cleaner Wax.
Features
- The ultimate protection for fiberglass, metal & painted surfaces.
- UV inhibitors help stop fading and oxidation.
- For medium to heavy oxidation, use Premium Cleaner Wax.
- Maximum UV Protection & Shine.
- Increases Hull Speed.
- Specially formulated for use on fiberglass, metal, plexiglass and painted surfaces and can be applied over old wax or polish.
- Lasts up to 4 to 5 times longer than other marine waxes.
Directions
Before polishing, wash surface to remove grit and dirt (we recommend Star brite Boat Wash or Star brite Sea Safe Biodegradable Boat Wash). Shake bottle well. Apply evenly with a clean cloth to a small area in a circular motion while polish is wet. Star brite Premium Marine Polish will quickly dry to a haze. Wipe off haze using another clean, dry cloth. For best results, apply a second coat within 30 days. Two applications will provide exceptional protection against fading, chalking, rust, corrosion and general degradation. Oil, dirt and salt will not stick to the super slick surface and can usually be washed off with boat wash and water. NOTE: If surface to be treated is faded, chalking or oxidized, first use Star brite Premium Cleaner Wax to restore the finish.”
Rick Murphy Presents: Star brite’s Ultimate Guide to Waxes & Polishes
SKU: EJM-265673 -
Marine Care
Star Brite Rust Stain Remover 650ml
Star Brite Rust Stain Remover
Rust Stain Remover is the best way to eliminate unsightly rust stains from boats, RVs, exterior walls of homes or wherever else they may form. The formula begins working on contact, dissolving the oxidation that causes these stains. Easy to use; spray directly onto stained area and rinse off; no heavy scrubbing needed.
Features
- Easy to use spray on formula.
- No rubbing or scrubbing required.
- Safe for use on fiberglass, metal and painted surfaces.
- Removes rust drip stains and sprinkler rust deposits.
- Contains no harsh acids
- Great for cleaning corrosion stains caused by metal hardware, nuts, bolts and other marine fittings
- Specially formulated for marine and RV use; Also ideal for removing sprinkler stains
Directions
Spray Star brite Rust Stain Remover directly on surface to be treated. Let product work until stain is gone before rinsing area with fresh water. Deep stains may require a second application and light scrubbing with a brush or cloth. To help prevent future rust stains, apply a protective coating of Star brite Polish to cleaned area to seal surface pores. Avoid contact with fabric. Test area to be cleaned for colorfastness in an inconspicuous area before proceeding with overall cleaning.
Rust Removal with Star Brite Rust Stain Remover
SKU: 089222P -
Marine Care
Star brite Salt Remover 946ml with Applicator Kit
Star brite Salt Remover 946ml with Applicator Kit
Safely removes salt deposits from fiberglass decks, vinyl, painted surfaces, aluminum, chrome, stainless steel, magnesium, plastic, wood, glass and rubber.
Features
- Use Salt Remover applicator to remove salt deposits from outboard and inboard engines
- Biodegradable formula will not remove wax or polish; will not cause streaks
- Items can be completely immersed to remove salt deposits
- Leaves a protective, non-slippery PTEF® coating to repel future salt deposits
Directions
TO REMOVE SALT DEPOSITS FROM EXTERIOR MARINE SURFACES
Fill dispenser with concentrate. Attach one end of applicator to a garden hose and the other end to a trigger-type watering nozzle. Ensure blue knob is in the “Mixture” position, then turn black knob to “On” position. Thoroughly saturate all surfaces that need to be treated, allowing Salt Remover to soak in for 5 to 10 minutes. Stubborn deposits may require light brushing. Rinse with fresh water and allow to air dry.TO TREAT ITEMS BY IMMERSING
Add approximately 1 fl. oz. (30 ml) of Salt Remover Concentrate per 32 fl. oz. (1 L) of fresh water. Immerse item to be treated for several minutes, rinse with fresh water and allow to air dry.TO FLUSH INBOARD AND OUTBOARD ENGINES
Fill dispenser cup with Salt Remover Concentrate. Attach one end of applicator to a garden hose and the other end to a flushing unit designed for your engine type. Ensure blue knob is in the “Water Only” position, then turn the black knob to “On”. Run the engine to reach normal operating temperature. Once operating temperature has been reached, turn off the engine and the blue knob to “mixture” and verify solution is flowing. Restart engine and allow to run until dispenser cup is clear, and product has been used up. The Salt Remover PTEF® coating will protect the engine against future rust and corrosion.NOTE: Do not store Salt Remover in applicator when not in use.
SKU: EJM-260865 -
Marine Care
Star brite Teak Brightener – Premium
Star brite Teak Brightener – Premium
Brightens teak and other fine woods. Highlights wood grain and enhances warm natural color. Use as the second step in the restoration of grey weathered teak.
Features
- Brightens teak and other fine woods.
- Highlights wood grain and enhances warm natural color.
- Use as the second step in the restoration of grey weathered teak.
- Easy to use – just apply and rinse.
- No rubbing or scrubbing required.
Directions
If wood is dirty and/or stained, first treat with Star brite Premium Teak Cleaner. Shake well.
Apply with sponge, cloth or brush in direction of wood grain. Allow to remain on surface for 5 minutes then rinse thoroughly with fresh water. For best results, use when temperature is over 50°F. Use of rubber gloves is recommended. Immediately rinse off spills and drips from surfaces not being treated. To preserve and protect cleaned wood, apply Star brite Premium Golden Teak Oil or Tropical Teak Oil Sealer.
SKU SIZE BLA-265636 
473ml BLA-265637 
946ml BLA-265635 
3.78 litre Teak Wood Restoration with Star Brite Teak Oil Care Kit
SKU: BLA-265636, BLA-265637, BLA-265635 -
Marine Care
Star brite Teak Care Kit
Star brite Teak Care Kit
Premium Teak Care Kit contains all you need to refinish old teak or protect new wood. The Premium Teak Cleaner, Premium Teak Brightener, and Premium Golden Teak Oil are all formulated using the best, most high-tech ingredients available for long-lasting protection and beauty. This kit is ideal for use on all fine woods and wood furniture. The easy-to-follow three-step process produces professional-grade results even for first-time users.
Features
- Kit contains everything needed to clean, restore and protect teak in one convenient package.
- Each kit contains Premium Teak Cleaner, Premium Teak Brightener and Premium Golden Teak Oil.
- 16 fl. oz. kit is ideal for use on smaller boats that have minimal teak trim.
- 32 fl. oz. kit is perfect for the larger boat with extensive teak trim.
SKU SIZE BLA-265629 
473ml BLA-265628 
946ml Teak Wood Restoration with Star Brite Teak Oil Care Kit
SKU: BLA-265629, BLA-265628 -
Marine Care
Star brite Teak Cleaner – Premium
Star brite Teak Cleaner – Premium
Premium Teak Cleaner is the fastest, easiest way to clean teak and other fine woods to prepare them for oiling. It will safely remove old oils and stains without the need for sanding. Cleans without harsh acids or neutralizers. Easy to use, it produces great results on teak and other fine woods.
Features
- Safe, easy to use formula.
- Cleans teak and other fine woods.
- Removes stains and weathering.
- Use as the first step in the restoration of grey, weathered teak.
- No need to sand after cleaning.
- Does not raise wood grain.
- Cleans teak with no hard rubbing
- Ideal for use on teak furniture and home decks
- Will not harm fiberglass or painted surfaces
- Prepares fine woods for oiling and sealing
- Contains no dangerous acids
Directions
Badly weathered (grey or black) teak: Apply Star brite Premium Teak Cleaner directly to dry wood. Spread cleaner with stiff bristle cleaning brush or a Star brite Medium Scrub Pad. Allow Star brite Premium Teak Cleaner to remain on surface for approximately two to three minutes, then scrub in the direction of wood grain to ensure deep cleaning. Rinse thoroughly with fresh water. For stained areas, use Star brite Magic Scrub to remove even the most stubborn discoloration. Lightly stained teak: Wet wood with fresh water. Apply Star brite Premium Teak Cleaner and spread with brush or Star brite Medium Scrub Pad. Scrub lightly to remove dirt and stains. Rinse thoroughly with fresh water. After completely cleaning wood, apply Star brite Premium Teak Brightener to highlight wood grain and enhance natural wood color. To preserve and protect cleaned wood, apply Star brite Premium Golden Teak Oil or Tropical Teak Oil Sealer. NOTE: Immediately rinse spills and drips from surfaces not to be treated. Avoid contact with fabrics.
SKU SIZE BLA-265633 
473ml BLA-265634 
946ml BLA-265632 
3.78 litre Teak Wood Restoration with Star Brite Teak Oil Care Kit
SKU: BLA-265632, BLA-265633, BLA-265634 -
Marine Care
Star brite Ultimate Vinyl Clean 946ml
Star brite Ultimate Vinyl Clean 946ml
Star brite Ultimate Vinyl Clean is formulated to blast away the toughest dirt, grime and greasy stains from vinyl, plastic, rubber and leather surfaces. Use on car, RV and boat upholstery, interior/exterior trim, foul weather gear, outdoor cushions or canopies and more.
Features
- Powerful formula is tough on dirt, won’t harm vinyl
- Contains no harsh acids or caustic cleaners
- Engineered for use on vinyl, plastic, rubber and leather surfaces
Directions
DIRECTIONS: Spray Ultimate Vinyl Clean onto surface to be cleaned. Using a cloth, soft brush or sponge, rub in a circular, overlapping motion to ensure uniform coverage. Allow Ultimate Vinyl Clean to work into surface for 15-30 seconds before wiping clean or rinsing. Stubborn stains may require a repeat application that is allowed to soak in for about a minute, followed by light scrubbing and rinsing or wiping clean.
Next Steps: For best results, treat cleaned surfaces with Star brite Ultimate Vinyl Guard to preserve, protect and enhance the appearance while providing maximum UV protection.
NOTE: Before treating delicate surfaces (leather, decals, boot stripe tape, painted areas) or where it may drip, test this product on a small inconspicuous area. If adverse reaction occurs, do not use on that surface. Star brite’s liability is limited to the purchase price of this product.
Keep Your Vinyl Clean with Star Brite Vinyl Cleaner
SKU: EJM-513264 -
Boating Accessories
Stayput Horizontal Fasteners (25204)
Stayput Horizontal Fasteners (25204)
• Designed to attach overlapping sections of fabric.
• The Horizontal fastener is designed to attach fabric to almost any solid structure.Features:
Part No.: 25204
Description: Nylon Fastener-Single
Base Size(mm): 35 x 16
Tongue Size(mm): 9
Mounting Hole Size(mm): 3SKU: 25204 -
Boating Accessories
Stayput Horizontal Fasteners (25204M)
Stayput Horizontal Fasteners (25204M)
• Designed to attach overlapping sections of fabric.
• The Horizontal fastener is designed to attach fabric to almost any solid structure.Features:
Part No.: 25204M
Description: Nylon Fastener with Stainless Steel Tongue-Single
Base Size(mm): 35 x 16
Tongue Size(mm): 9
Mounting Hole Size(mm): 3SKU: 25204M -
Boating Accessories
Stayput Horizontal Fasteners (25204SS)
Stayput Horizontal Fasteners (25204SS)
• Designed to attach overlapping sections of fabric.
• The Horizontal fastener is designed to attach fabric to almost any solid structure.Features:
Part No.: 25204SS
Description: Stainless Steel Fastener – Single
Base Size(mm): 35 x 16
Tongue Size(mm): 9
Mounting Hole Size(mm): 3SKU: 25204SS -
Boating Accessories
Stayput Horizontal Fasteners (25206)
Stayput Horizontal Fasteners (25206)
• Designed to attach overlapping sections of fabric.
• The Horizontal fastener is designed to attach fabric to almost any solid structure.Features:
Part No.: 25206
Description: Nylon Fastener – Double
Base Size(mm): 35 x 16
Tongue Size(mm): 9
Mounting Hole Size(mm): 3SKU: 25206 -
Boating Accessories
Stayput Horizontal Fasteners (25206M)
Stayput Horizontal Fasteners (25206M)
• Designed to attach overlapping sections of fabric.
• The Horizontal fastener is designed to attach fabric to almost any solid structure.Features:
Part No.: 25206M
Description: Nylon Fastener with Stainless Steel Tongue – Double
Base Size (mm): 35 x 16
Tongue Size (mm): 9
Mounting Hole Size (mm): 3SKU: 25206M -
Boating Accessories
Stayput Horizontal Fasteners (25206SS)
Stayput Horizontal Fasteners (25206SS)
• Designed to attach overlapping sections of fabric.
• The Horizontal fastener is designed to attach fabric to almost any solid structure.Features:
Part No.: 25206SS
Description: Stainless Steel Fastener – Double
Base Size (mm): 35 x 16
Tongue Size (mm): 9
Mounting Hole Size (mm): 3SKU: 25206SS -
Boating Accessories
Stayput Pressclip (25201)
Stayput Pressclip (25201)
• Comprising of a Cap, Stud & Base, the New Stayput Press Clip is the corrosion free alternative to conventional metal press studs / durables.
• Designed primarily for marine use where fabric needs to be attached to a solid surface, but is also suitable for use in many other applications.
• All 3 components are manufactured entirely using UV stabilized nylon / acetal compounds and are available in black and white as standard.
• The cap & stud are installed in the fabric by simply squeezing the parts together through a 5mm hole.
• The base is fixed using either a 6g countersunk screw or a 3mm or 1/8 pop rivet.
• Totally corrosion free fastening solution.Features:
Part No.: 25201
Description: White Stayput 3 Piece Pressclip
Suits Tube (mm): 20
StudØ (mm): 18
BaseØ (mm): 16
Mount Hole (mm): 5SKU: 25201 -
Boating Accessories
Stayput Pressclip (25201B)
Stayput Pressclip (25201B)
• Comprising of a Cap, Stud & Base, the New Stayput Press Clip is the corrosion free alternative to conventional metal press studs / durables.
• Designed primarily for marine use where fabric needs to be attached to a solid surface, but is also suitable for use in many other applications.
• All 3 components are manufactured entirely using UV stabilized nylon / acetal compounds and are available in black and white as standard.
• The cap & stud are installed in the fabric by simply squeezing the parts together through a 5mm hole.
• The base is fixed using either a 6g countersunk screw or a 3mm or 1/8 pop rivet.
• Totally corrosion free fastening solution.Features:
Part No.: 25201B
Description: Black Stayput 3 Piece Pressclip
Suits Tube (mm): 20
StudØ (mm): 18
BaseØ (mm): 16
Mount Hole (mm): 5SKU: 25201B -
Boating Accessories
Stayput Pressclip (25203)
Stayput Pressclip (25203)
• Comprising of a Cap, Stud & Base, the New Stayput Press Clip is the corrosion free alternative to conventional metal press studs / durables.
• Designed primarily for marine use where fabric needs to be attached to a solid surface, but is also suitable for use in many other applications.
• All 3 components are manufactured entirely using UV stabilized nylon / acetal compounds and are available in black and white as standard.
• The cap & stud are installed in the fabric by simply squeezing the parts together through a 5mm hole.
• The base is fixed using either a 6g countersunk screw or a 3mm or 1/8 pop rivet.
• Totally corrosion free fastening solution.Features:
Part No.: 25203
Description: White Stayput Pressclip Curved
Suits Tube (mm): 25
Stud Ø (mm): 16
Base Ø (mm): 16
Mount Hole (mm): 4SKU: 25203 -
Boating Accessories
Stayput Pressclip (25203B)
Stayput Pressclip (25203B)
• Comprising of a Cap, Stud & Base, the New Stayput Press Clip is the corrosion free alternative to conventional metal press studs / durables.
• Designed primarily for marine use where fabric needs to be attached to a solid surface, but is also suitable for use in many other applications.
• All 3 components are manufactured entirely using UV stabilized nylon / acetal compounds and are available in black and white as standard.
• The cap & stud are installed in the fabric by simply squeezing the parts together through a 5mm hole.
• The base is fixed using either a 6g countersunk screw or a 3mm or 1/8 pop rivet.
• Totally corrosion free fastening solution.Features:
Part No.: 25203B
Description: Black Stayput Pressclip Curved
Suits Tube (mm): 25
Stud Ø (mm): 16
Base Ø (mm): 16
Mount Hole (mm): 4SKU: 25203B -
Lighting, Navigation Lights
Steaming Deck Light – Mast Mount
Steaming Deck Light – Mast Mount
Combined 12 volt deck light and 225º steaming light. 20 watt quartz halogen downlight/decklight. Soft wrap around mast type fitting. Conforms to IMCO 1972 regulations for navigation lights.
BLA CODEHEIGHT UP MMA MMB MMMOUNT SCREWS MM121300 
135 68 54 4 r/h Spare Parts
SKU: 121300
