RWB Marine Axis Ranger Hi Back PRO Folding Seat Blue / White Subtotal: $329.00
Shop
Showing 2971–3000 of 3735 results
-
Bilge Pumps, Pumps and Plumbing
Rule-Mate Bilge Pump – 500/800/1100 GHP
Rule-Mate Bilge Pump – 500/800/1100 GHP
Rule-Mate bilge pumps provide ultimate pumping performance, which helps keep your bilge clear of nuisance water, building on the genuine Rule design.
Rule-Mate bilge pumps operate using an internal level sensor.
- For 500/800/1100 GPH models, when water reaches 2 inches (5 cm), the pump will automatically activate, removing water from the bilge. When the water level reaches 3/8 inches (0.9 cm) the pump will turn off until the water level rises again
- For 1500/2000 GPH models, when water reaches 2-3/4 inches (7 cm), the pump will automatically activate, removing water from the bilge. When the water level reaches 5/8 inches (1.6 cm) the pump will turn off until the water level rises again
Bilges are not always clean and free from debris. If the Rule-Mate level sensor becomes fouled by debris or contaminated water, its unique back-up feature will prevent the pump from entering a run-on condition, protecting the battery while maintaining automatic operation.
PRODUCT FEATURES
- Higher Flow — optimized impeller to provide up to 10% more flow at the same amperage as previous models with capacities from 500-2000 GPH (1893-7571 LPH)
- Auto Sense Intelligence — integral water level sensor controls the pump automatically
- Back Up Feature — prevents continuous running if sensor is fouled by debris, pump reverts to 2.5 minute cycle mode
- Smaller Footprint — 2/3 the size of previous models (500-1100 GPH models only)
- Built-In Thermal Cut-Off (TCO) — provides added protection for pump and vessel
- Back Flow Prevention — reduces the amount of water left over in the bilge, reducing odor and helping keep your bilge cleaner (500-1100 GPH models only)
- Hidden Air Vents in the Body — helps prevent air locking in challenging plumbing installations and helps with the check valve (500-1100 GPH models only)
- Threaded Discharge — easier installation, easier maintenance
Instruction Manual
Rule-Mate Bilge Pump Key Features Overview
SKU: RWB0822, RWB0824, RWB0826 -
Fuel Tanks & Accessories, Tanks
RWB Marine 12 Litre Fuel Tank & Gauge
RWB Marine 12 Litre Fuel Tank & Gauge
Highest quality, fully approved marine fuel tanks made from tough, dent-resistant, lightweight, non-rusting, high density polyethylene. Easy to carry, easy to stow, safe and sturdy. These fuel tanks are fully approved to AS2906 and have the Australian standard mark stamped into the tank. Suitable for use with petrol and ethanol blended fuel. These tanks will also handle Diesel fuel – however if a diesel return line is required there is no standard modiflcation available to return the line to the tank.
- 12 litre (3.2 US gallon) capacity.
- Supplied with vented cap and fuel pickup assembly with filter.
- Carried horizontally.
- 355 L x 255 W x 220mm H.
SKU: RWB3450 -
Boating Accessories
RWB Marine 40 Litre Bait Tank with Lid
RWB Marine 40 Litre Bait Tank with Lid
RWB Livewell Bait Tank with Hatch.
- Hatch cut out : 200mm x 295mm
- Bait Tank Height : 300mm (With Hatch)
- Bait Tank Width : 510mm
- Bait Tank Depth : 270mm
- Installation height: You will need 80mm of clearance below the tank to allow for access and connection of a drain hose. Total installation height is 380mm.
SKU: RWB10180 -
Fuel Tanks & Accessories, Tanks
RWB Marine 45 Litre Low Profile Fuel Tank & Gauge
RWB Marine 45 Litre Low Profile Fuel Tank & Gauge
Canadian made injected moulded fuel tanks made from highdensity polyethylene with UV stabilised resin Includes vented fuel cap and fuel level gauge A variety of capacities and sizes are available. Height dimensions shown below include the fuel gauge / cap Suitable for use with petrol and ethanol blended fuel These tanks will also handle diesel fuel however if a diesel return line is required there is no standard modification available to return the line to the tank.
SKU: RWB3678 -
Seating, Seats
RWB Marine Axis Admiral Compact Seat – Grey / Charcoal
RWB Marine Axis Admiral Compact Seat – Grey / Charcoal
Attractive 2 colour carbon fibre pattern seats. Very comfortable padded and upholstered bucket style seats in a relatively compact overall size. Bolster thigh support for comfort when seated – and then flips up on aluminium hinges to give great support when standing in the helm position. Heavy duty rotationally moulded base frame for strength and support. Thick closed cell foam padding with marine grade vinyl upholstery. These premium seats require a seat slide for mounting.
- Flip-up hinged and padded thigh support
- Heavy duty rotationally moulded base
- Thick foam padding for comfort & support
- Marine grade heavy duty vinyl upholstery
- Compact size for a bucket style seat
- Width : 525 Depth : 670 Height : 600mm
- Designed for seat slide mounting only
- Attractive 2 colour carbon fibre patterns
SKU DESCRIPTION COLOR RWB5031 
Axis Admiral Compact Seat
White/Black RWB5032 
Axis Admiral Compact Seat
Grey/Charcoal *Items deemed to be bulky or requiring freight to areas considered country or remote may incur additional freight charges.
SKU: RWB5032 -
Seating, Seats
RWB Marine Axis Admiral Compact Seat – White / Black
RWB Marine Axis Admiral Compact Seat – White / Black
Attractive 2 colour carbon fibre pattern seats. Very comfortable padded and upholstered bucket style seats in a relatively compact overall size. Bolster thigh support for comfort when seated – and then flips up on aluminium hinges to give great support when standing in the helm position. Heavy duty rotationally moulded base frame for strength and support. Thick closed cell foam padding with marine grade vinyl upholstery. These premium seats require a seat slide for mounting.
- Flip-up hinged and padded thigh support
- Heavy duty rotationally moulded base
- Thick foam padding for comfort & support
- Marine grade heavy duty vinyl upholstery
- Compact size for a bucket style seat
- Width : 525 Depth : 670 Height : 600mm
- Designed for seat slide mounting only
- Attractive 2 colour carbon fibre patterns
SKU DESCRIPTION COLOR RWB5031 Axis Admiral Compact Seat White/Black RWB5032 Axis Admiral Compact Seat
Grey/Charcoal *Items deemed to be bulky or requiring freight to areas considered country or remote may incur additional freight charges.
SKU: RWB5031 -
Seating, Seats
RWB Marine Axis H52 Flip Up Compact Seat – Charcoal/Light Grey
RWB Marine Axis H52 Flip Up Compact Seat – Charcoal/Light Grey
Very comfortable padded and upholstered bucket style seats in a relatively compact overall size. Bolster thigh support for comfort when seated – and then flips up on aluminium hinges to give great support when standing in the helm position. Heavy duty rotationally moulded base frame for strength and support. Thick closed cell foam padding with marine grade vinyl upholstery. These premium seats require a seat slide for mounting.
- Flip-up hinged and padded thigh support
- Heavy duty rotationally moulded base
- Thick foam padding for comfort & support
- Marine grade heavy duty vinyl upholstery
- Relatively compact size for a bucket style seat
- Width : 520 Depth : 670 Height : 560mm
- 3 colour combinations available
- Designed for mounting to a seat slide only
SKU DESCRIPTION COLOR RWB5097 
Flip Up Compact Seat Charcoal/Light Grey RWB5098 
Flip Up Compact Seat Dark Blue/White RWB5099 
Flip Up Compact Seat White/Very Light Grey *Items deemed to be bulky or requiring freight to areas considered country or remote may incur additional freight charges.
SKU: RWB5097 -
Seating, Seats
RWB Marine Axis H52 Flip Up Compact Seat – Dark Blue / White
RWB Marine Axis H52 Flip Up Compact Seat – Dark Blue / White
Very comfortable padded and upholstered bucket style seats in a relatively compact overall size. Bolster thigh support for comfort when seated – and then flips up on aluminium hinges to give great support when standing in the helm position. Heavy duty rotationally moulded base frame for strength and support. Thick closed cell foam padding with marine grade vinyl upholstery. These premium seats require a seat slide for mounting.
- Flip-up hinged and padded thigh support
- Heavy duty rotationally moulded base
- Thick foam padding for comfort & support
- Marine grade heavy duty vinyl upholstery
- Relatively compact size for a bucket style seat
- Width : 520 Depth : 670 Height : 560mm
- 3 colour combinations available
- Designed for mounting to a seat slide only
SKU DESCRIPTION COLOR RWB5097 Flip Up Compact Seat Charcoal/Light Grey RWB5098 Flip Up Compact Seat Dark Blue/White RWB5099 Flip Up Compact Seat White/Very Light Grey *Items deemed to be bulky or requiring freight to areas considered country or remote may incur additional freight charges.
SKU: RWB5098 -
Seating, Seats
RWB Marine Axis H52 Flip Up Compact Seat – White / Very Light Grey
RWB Marine Axis H52 Flip Up Compact Seat – White / Very Light Grey
Very comfortable padded and upholstered bucket style seats in a relatively compact overall size. Bolster thigh support for comfort when seated – and then flips up on aluminium hinges to give great support when standing in the helm position. Heavy duty rotationally moulded base frame for strength and support. Thick closed cell foam padding with marine grade vinyl upholstery. These premium seats require a seat slide for mounting.
- Flip-up hinged and padded thigh support
- Heavy duty rotationally moulded base
- Thick foam padding for comfort & support
- Marine grade heavy duty vinyl upholstery
- Relatively compact size for a bucket style seat
- Width : 520 Depth : 670 Height : 560mm
- 3 colour combinations available
- Designed for mounting to a seat slide only
SKU DESCRIPTION COLOR RWB5097 Flip Up Compact Seat Charcoal/Light Grey RWB5098 Flip Up Compact Seat Dark Blue/White RWB5099 Flip Up Compact Seat White/Very Light Grey *Items deemed to be bulky or requiring freight to areas considered country or remote may incur additional freight charges.
SKU: RWB5099 -
Seating, Seats
RWB Marine Axis Ranger Hi Back PRO Folding Seat Blue / White
RWB Marine Axis H52 Flip Up Compact Seat – White / Very Light Grey
* This product due to its bulky nature requires an additional freight surcharge. We will contact you regarding this depending on location – or simply contact us on 0732658016 for a quote.
The Ranger Hi-Back Pro folding boat seat is a premium quality folding seat. Upholstered in a new style textured vinyl with diamond stitched inserts over plush foam padding.
SKU: RWB6507 -
Marine Care
RWB Marine Boat Maintenance Kit
RWB Marine Boat Maintenance Kit
A practical kit to keep on board for cleaning the boat and for use as a boat hook. Includes :
- Telescopic anodised aluminium pole with threaded shaft to attach heads
- Screw-on deck scrub brush head
- Screw-on mop head
- Screw-on boat hook head
SKU: RWB2154 -
Marine Care
RWB Marine Boat Maintenance Kit
RWB Marine Boat Maintenance Kit
A practical kit to keep on board for cleaning the boat and for use as a boat hook. Includes :
- Telescopic anodised aluminium pole with threaded shaft to attach heads
- Screw-on deck scrub brush head
- Screw-on mop head
- Screw-on boat hook head
SKU: RWB5376-1 -
Boating Accessories, Livewell Pumps, Pumps and Plumbing
RWB Marine Deluxe Livewell Bait Tank with Hatch, Rule Pump & Flowrite Fittings
Boating Accessories, Livewell Pumps, Pumps and PlumbingRWB Marine Deluxe Livewell Bait Tank with Hatch, Rule Pump & Flowrite Fittings
RWB Marine Deluxe Livewell Bait Tank with Hatch, Rule Pump & Flowrite Fittings
RWB Deluxe Livewell Bait Tank Kit.
- 1 x RWB Marine 30 Litre tank
- 1 x QWIK-LOK Rule pump adaptor
- 1 x Threaded standpipe 12″
- 1 x Drain outlet heavy duty hose 28mm x 1.6M
- 1 x In-line heavy duty hose 20mm x 1.6M
- 2 x Stainless steel hose clamp 21-38mm
- 2 x Stainless steel hose clamp 13-25mm
- 1 x Nuova Rade hatch 375mm x 275mm Italian made
- 1 x Rule Tournament 403 dual port 800GPH pump
- 1 x Threaded standpipe drain elbow
- 1 x QWIK-LOK Thru hull straight outlet 1 1/8″
- 1 x QWIK-LOK spray head
- 1 x QWIK-LOK straight sockets 3/4″
- 2 x QWIK-LOK straight sockets 1 1/8″
- 1 x QWIK-LOK adaptor for Rule pump 3/4″
SKU: RWB10184 -
Anchoring and Mooring, Fenders, Floats, Buoys, Boat Hooks
RWB Marine Fender White/Blue x 580
RWB Marine Fender White/Blue x 580
Top quality heavy duty infl atable fenders, made in Holland. Manufactured from UV resistant white PVC with BLUE reinforced star pattern heads in the classic European style. These fenders are commercial quality at a very realistic price. A large range of sizes are available to suit small runabouts up to large yachts and cruisers. Available as fender only – Infl ate fenders with an air compressor or use a special majoni bike pump adaptor fitting.
SKU: RWB1541 -
Fuel Tanks & Accessories, Pumps and Plumbing
RWB Marine Flo n Go Maxflo Syphon Pump
RWB Marine Flo n Go Maxflo Syphon Pump
The Flo n’ Go MaxFlo pump turns your gas can in to a safe, quick and easy fluid transfer system. The patented pump allows you to stop and restart the flow of fuel with the press of a trigger. No lifting. No spills. No overfills. Child safety lock. Flow rate of 2 gallons per minute in Siphon Mode.
SKU: RWB3432 -
Fittings, Pumps and Plumbing
RWB Marine HoseCoil Expandable Hose Kit PRO Gold 15m
RWB Marine HoseCoil Expandable Hose Kit PRO Gold 15m
The HoseCoil Expandable PRO is a premium product. The hose expands to 3x length under pressure, then retracts after use for compact storage in the nylon mesh and polyester bag. The Expandable PRO hose features a multi-layer construction consisting of a soft outer cover and a rubber inner tube. The attractive gold and white braided outer cover is made from Dacron, which is known for its tough and abrasion resistant properties. The large diameter of the inner hose produces 30% more flow rate than most other expandable hose kits, and the large wall thickness of the tubing provides added strength and durability. The Brass Twist Nozzle significantly increases water pressure for improved cleaning and spray distance. It features an adjustable spray pattern, comfortable grip, and rubber tip to protect the deck. Includes :
- Gold/white expandable hose.
Heavy duty brass twist nozzle. Nylon mesh and polyester storage bag.
SKU: J0027-161 -
Fittings, Pumps and Plumbing
RWB Marine HoseCoil Expandable Hose Kit PRO Gold 22.5m
RWB Marine HoseCoil Expandable Hose Kit PRO Gold 22.5m
The HoseCoil Expandable PRO is a premium product. The hose expands to 3x length under pressure, then retracts after use for compact storage in the nylon mesh and polyester bag. The Expandable PRO hose features a multi-layer construction consisting of a soft outer cover and a rubber inner tube. The attractive gold and white braided outer cover is made from Dacron, which is known for its tough and abrasion resistant properties. The large diameter of the inner hose produces 30% more flow rate than most other expandable hose kits, and the large wall thickness of the tubing provides added strength and durability. The Brass Twist Nozzle significantly increases water pressure for improved cleaning and spray distance. It features an adjustable spray pattern, comfortable grip, and rubber tip to protect the deck. Includes :
- Gold/white expandable hose.
Heavy duty brass twist nozzle. Nylon mesh and polyester storage bag.
SKU: J0027-162 -
Fittings, Pumps and Plumbing
RWB Marine HoseCoil Expandable Hose Kit PRO Gold 7.5m
RWB Marine HoseCoil Expandable Hose Kit PRO Gold 7.5m
The HoseCoil Expandable PRO is a premium product. The hose expands to 3x length under pressure, then retracts after use for compact storage in the nylon mesh and polyester bag. The Expandable PRO hose features a multi-layer construction consisting of a soft outer cover and a rubber inner tube. The attractive gold and white braided outer cover is made from Dacron, which is known for its tough and abrasion resistant properties. The large diameter of the inner hose produces 30% more flow rate than most other expandable hose kits, and the large wall thickness of the tubing provides added strength and durability. The Brass Twist Nozzle significantly increases water pressure for improved cleaning and spray distance. It features an adjustable spray pattern, comfortable grip, and rubber tip to protect the deck. Includes :
- Gold/white expandable hose.
Heavy duty brass twist nozzle. Nylon mesh and polyester storage bag.
SKU: J0027-160 -
Fishing Gear
RWB Marine Large Deluxe Viewing Glass Bucket with Flexible Face Seal – Underwater Viewing Bathiscope
-5%
Fishing GearRWB Marine Large Deluxe Viewing Glass Bucket with Flexible Face Seal – Underwater Viewing Bathiscope
RWB Marine Large Deluxe Viewing Glass Bucket with Flexible Face Seal – Underwater Viewing Bathiscope
Large deluxe bathiscope provides outstanding clear views of objects beneath the water surface. Soft rubber face seal provides excellent viewing comfort. All around handle offers safe and secure grip. Easily and quickly dismantles into four nesting pieces for easy storage. 510 x 360mm total assembled size.
Just break the water surface with the lens of the bathiscope and look through the soft rubber face piece for a view as far as the water clarity permits. Check your mooring, anchor, cray pots or traps
- Search for fish
- View coral reefs
- Simply use to see what’s below
- Dismantles into four pieces for ease of storage
High quality, heavy duty orange plastic construction with all round handle and soft flexible rubber face seal. This bathiscope quickly and easily dismantles into four pieces which fit inside each other for easy storage. 510mm x 360mm total size assembled.
SKU: RWB-3796 -
Fuel Tanks & Accessories, Tanks
RWB Marine Nouva Rade Fuel Tank – 12L with vented cap seal
RWB Marine Nouva Rade Fuel Tank – 12L with vented cap seal
12 litre capacity. With vented cap. No gauge. Tank size : 400mm L x 250mm W x 180mm H
Quality fuel tanks at a reasonable price. Made by Nuova Rade of Italy these HULK outboard motor fuel tanks are of robust rotationally moulded plastic construction and are completely noncorrosive. They are strong yet lightweight and wont crack dent or rust. The two largest tanks are supplied complete with a fuel level gauge. They are CE approved but NOT approved to Australian standards. Not for use with diesel or ethanol blended fuel.
Features
- Noncorrosive robust construction
- Complete with vented cap with seal 22L & 30L sizes have a fuel gauge
- Supplied complete with standard tank adaptor which includes a mesh fllter and8mm barbed fuel hose connector (simply unscrew the barbed connector to fltstandard fuel tank flttings)
SKU: RWB4581 -
Outboard Parts
RWB Marine Outboard Motor Support Bracket
RWB Marine Outboard Motor Support Bracket
“MOTO FLEX” deluxe support bracket for motors up to 150HP. Supports motor leg while towing. Heavy gauge plated steel tubing & shock absorbing spring steel coil. The “U” end hooks over the trailer chassis and the padded “V” end supports the motor leg. Supplied complete with rubber securing strap with end hooks.
SKU: RWB0616 -
Outboard Parts
RWB Marine Outboard Motor Trolley
RWB Marine Outboard Motor Trolley
Suits standard 2 stroke motors to approximately 20 HP – or 4 strokes to a maximum weight limit of 50Kg Plated steel frame with plastic end caps on all tube ends and soft rubber hand grips. Galvanised frame support arms with 150mm diameter plastic wheels. Large wooden support board 390 x 154 x 36mm.
SKU: RWB3875 -
-
Boating Accessories, Rod Holders
RWB Marine Oval Stainless Steel Rod Holders
RWB Marine Oval Stainless Steel Rod Holders
304 grade stamped polished stainless steel flush mounting.
Spot welds holding the shaft to the head.
Complete with plug type hinged black PVC sealing cap and rubber mounting gasket and stainless rod gimbal pin through shaft.
- 3 x 8mm countersunk fastening holes.
- Head size : 120 x 95mm
- Length : 210mm
- Shaft I.D : 38mm
- Cut out hole size : 50mm.
- Shaft is angled 30 degrees.
- Supplied per each.
SKU: RWB-511 -
Seat Pedestals and Swivels, Seating
RWB Marine Plug-In Pedestal Set – 325mm (13″) fixed height
RWB Marine Plug-In Pedestal Set – 325mm (13″) fixed height
* This product due to its bulky nature requires an additional freight surcharge. We will contact you regarding this depending on location – or simply contact us on 0732658016 for a quote.
These plug-in pedestals allow quick and easy removal of the entire pedestal and seat system. With the addition of an extra base the entire system can be easily and quickly relocated allowing for multiple seat positions on board. These pedestals feature a unique grooved post that provides security against rotation in seat mount and base. They have a 60mm diameter anodised aluminium post (Adjustable is 60mm bottom with 73mm top) and 228mm diameter anodised aluminium base. The 360 degree under seat swivel mount is made of strong powder coated aluminium. Available in 3 fixed height sizes and adjustable height telescopic size.
SKU DESCRIPTION Height RWB3945 
Plug-In Pedestal Set 325mm (13”) RWB3946 
Plug-In Pedestal Set 450mm (18”) SKU: RWB3945 -
Seat Pedestals and Swivels, Seating
RWB Marine Plug-In Pedestal Set – 450mm (18″) fixed height
RWB Marine Plug-In Pedestal Set – 450mm (18″) fixed height
* This product due to its bulky nature requires an additional freight surcharge. We will contact you regarding this depending on location – or simply contact us on 0732658016 for a quote.
These plug-in pedestals allow quick and easy removal of the entire pedestal and seat system. With the addition of an extra base the entire system can be easily and quickly relocated allowing for multiple seat positions on board. These pedestals feature a unique grooved post that provides security against rotation in seat mount and base. They have a 60mm diameter anodised aluminium post (Adjustable is 60mm bottom with 73mm top) and 228mm diameter anodised aluminium base. The 360 degree under seat swivel mount is made of strong powder coated aluminium. Available in 3 fixed height sizes and adjustable height telescopic size.
SKU DESCRIPTION Height RWB3945 Plug-In Pedestal Set 325mm (13”) RWB3946 Plug-In Pedestal Set 450mm (18”) SKU: RWB3946 -
Marine Care
RWB Marine Rain-X Original Glass Water Repellant 3.5 Fl.oz (103ml)
RWB Marine Rain-X Original Glass Water Repellant 3.5 Fl.oz (103ml)
Rain‑X® Original Glass Treatment dramatically improves wet weather driving visibility. Simply apply the treatment to exterior glass and watch the raindrops fly off your windscreen while driving. Rain‑X helps improve visibility by repelling rain, sleet and snow.
In tests conducted by a major university, better visibility improved driving response time up to a full second or more. At highway speeds, that’s almost four car lengths of extra stopping distance!
Product Features
- Improve all-weather visibility, safety and driving comfort
- Helps easily remove frost, ice, salt, mud and bugs
- Available in 473mL and 207mL
Product Usage Instructions
- Clean and dry surfaces before treating
- Apply in temperatures above 4 degrees celsius
- Apply Rain‑X® to a small, folded, dry cloth
- Wipe onto exterior glass using a firm, circular and overlapping motion
- Allow product to dry; a slight haze may appear
- Reapply Rain‑X® to ensure complete and uniform coverage
- Remove final haze with a dry cloth or by sprinkling water onto the haze and wiping with a paper towel
Other Uses for Rain‑X® Original Glass Treatment;
- Try Rain‑X® Original Glass Treatment on your glass shower door and home glass windows for more water beading magic!
- Avoid using Rain‑X® Original Glass Treatment on plastic shower doors, glass shower doors with etching or frosting, plexiglass and fiber glass
- Avoid using Rain‑X® Original Glass Treatment on any plastic surfaces, including motorcycle windshields, ATVs and solar panels.
Rain-X® Original Glass Treatment Video from Truck U TV
SKU: RWB2251 -
Boating Accessories, Watersports Gear
RWB Marine Ski Pole HD Ubolt & Base
RWB Marine Ski Pole HD Ubolt & Base – Heavy duty pole – for twin sking
Quality TENOB range of detachable ski poles made from polished stainless steel with a non-corrosive composite base. The base has a spring loaded quick release pin for fast and easy pole removal. 2 types and mounting styles are available.Standard pole and heavy duty pole.
- Standard pole – 1.5mm wall thickness – single skier only
- Heavy duty pole – 2mm wall thickness (for twin sking)
- All poles are 1.2 Metres in length and 2″ 51mm O.D
- Transom / bulkhead mount type – includes pole, base and U bolt bracket. Collars prevent U bolt from clamping hard up, allowing fast pole removal.
- Thru-deck mounting type – includes pole, base and rectangular stainless steel fl at plate.
Important safety information – the U bolt bracket or mounting plate must be located NO lower (must be higher) than 480mm from the top of the pole. (Refer to label on pole)
Transom / Bulkead Mount Type
Includes 1.2 metre pole (standard or heavy duty) spring loaded non-corrosive base and U bolt bracket. Maximum transom thickness 35mm for U bolt mount.
SKU: RWB5191
