-
×
BLA Anchor Retriever - 250mm Styrene Float
1 × $88.90
Subtotal: $88.90
Anchoring and Mooring, Bollards and Cleats
Price Match
Stainless Steel Pull Up Cleat
Price Match
Price range: $50.00 through $72.01
Stainless Steel Pull Up Cleat 
Solid cast 316 grade stainless steel pop-up cleat. Convient, low profile cleat simply slides in to create smooth, non-snag profile. East to install and supplied with large nuts.
| Weight | 1 kg |
|---|---|
| Size | 115mm, 150mm |
Related products
-
Anchoring and Mooring, Bollards and Cleats
SAW Stainless Steel Split Bollard – Spring Loaded Captive Pin
-8%
Anchoring and Mooring, Bollards and CleatsSAW Stainless Steel Split Bollard – Spring Loaded Captive Pin
SAW Stainless Steel Split Bollard – Spring Loaded Captive Pin
Heavy duty 316G stainless steel cross bollards with a centre split for securing anchor chain into the bollard.
In addition, this cross bollard features a captive spring pin for locking in general link chain.
PART NUMBER BASE DIMENSIONS WIDTH HEIGHT CHAIN LINK SIZE MOUNTING HOLES SAW-29100 
62mm x 62mm 122mm 84mm 8-10mm Long Link 4 x 7mm holes with 41mm centres SAW-29102 86mm x 86mm 140mm 115mm 10-13mm 4 x 8mm holes with 57mm centres SKU: SAW-29100, SAW-29102 -
Anchoring and Mooring
Anchor Swivel Connector – 316 Stainless Steel suits 10-12mm Chain (110332)
Anchor Swivel Connector – 316 Stainless Steel suits 10-12mm Chain (110332)
- Pulls easily over bow roller.
- Pins removed using allen wrench.
- 316G Stainless Steel.
- Stamped with rated load.
Part No. 110332 Length (A) 97mm Width (D) 37mm Suits Chain Size 10mm Chain End (B) 14mm Anchor End (C) 23mm Pin Diameter Short (E) / Long (F) 10mm / 12mm Safe Working Load 1250kg Note Use with Loctite thread adhesive. SKU: 110332 -
Anchoring and Mooring, Bollards and Cleats
SAW Stainless Steel Split Bollard – No Pin
SAW Stainless Steel Split Bollard – No Pin
316 marine-grade stainless steel cross bollard featuring a split for securing anchor chain through the centre.
This split bollard will accept chain links from 8mm to 10mm.
PART NUMBER BASE DIMENSIONS WIDTH HEIGHT MOUNTING HOLES SAW-29101 
62mm x 62mm 94mm 84mm 4 x 6mm – hole centres are 41mm apart SKU: SAW-29101 -
Anchoring and Mooring, Fenders, Floats, Buoys, Boat Hooks
BLA Anchor Retriever – 300mm Styrene Float
-10%
Anchoring and Mooring, Fenders, Floats, Buoys, Boat HooksBLA Anchor Retriever – 300mm Styrene Float
BLA Anchor Retriever
Used in conjunction with existing anchoring tackle, the stainless steel ring fits around the anchor rode for deep water anchoring. Motoring forward at 5 to 6 knots lifts the anchor to the float ring. When the anchor chain has fully passed through the ring the anchor is held at the surface. This allows easy retrieval of the anchor rode without the continuous weight of ground tackle.
BLA CODEFLOAT DIA.MMRING DIA. MM144301 250 125 144302 300 125 SKU: 144302
