SAW Nylon Cleats
Tough black plastic horn cleats in three sizes.
- Heavy-duty nylon
PART NUMBER | LENGTH | WIDTH |
SAW-29950 | 100mm | 15.0mm |
SAW-29951 | 130mm | 18.5mm |
SAW-29952 | 165mm | 20.0mm |
SAW-29954 | 205mm | 25.0mm |
Tough black plastic horn cleats in three sizes.
PART NUMBER | LENGTH | WIDTH |
SAW-29950 | 100mm | 15.0mm |
SAW-29951 | 130mm | 18.5mm |
SAW-29952 | 165mm | 20.0mm |
SAW-29954 | 205mm | 25.0mm |
Length | 100mm, 130mm, 165mm, 205mm |
---|
Easy one hand use, these FastFender clips make it easy to attach fenders to rails up to 40mm in diameter.
PART NUMBER | COLOUR | WEIGHT | DIMENSIONS |
---|---|---|---|
SAW-37588BLK | Black | 122g | 160mm x 76mm x 47mm |
SAW-37588BLU | Blue | 122g | 160mm x 76mm x 47mm |
SAW-37588LG | Light grey | 122g | 160mm x 76mm x 47mm |
Used in conjunction with existing anchoring tackle, the stainless steel ring fits around the anchor rode for deep water anchoring. Motoring forward at 5 to 6 knots lifts the anchor to the float ring. When the anchor chain has fully passed through the ring the anchor is held at the surface. This allows easy retrieval of the anchor rode without the continuous weight of ground tackle.
BLA CODE
|
FLOAT DIA.MM
|
RING DIA. MM
|
---|---|---|
144301 | 250 | 125 |
144302 | 300 | 125 |
One piece pressed, heavy gauge, 316 grade stainless steel housing. Black delrin roller. Spring loaded, quick release captive pin to retain anchor and warp.
BLA CODE
|
OVERALL LENGTH MM
|
MOUNT BASE MM
|
HEIGHT MM
|
ROLLER WIDTH MM
|
MOUNT SCREWS MM
|
---|---|---|---|---|---|
192086 | 197 | 97 x 57 | 73 | 48 | 6 c/s |
192088 | 225 | 125 x 57 | 73 | 48 | 6 c/s |
Heavy duty 316G stainless steel cross bollards with a centre split for securing anchor chain into the bollard.
In addition, this cross bollard features a captive spring pin for locking in general link chain.
PART NUMBER | BASE DIMENSIONS | WIDTH | HEIGHT | CHAIN LINK SIZE | MOUNTING HOLES |
---|---|---|---|---|---|
SAW-29100 | 62mm x 62mm | 122mm | 84mm | 8-10mm Long Link | 4 x 7mm holes with 41mm centres |
SAW-29102 | 86mm x 86mm | 140mm | 115mm | 10-13mm | 4 x 8mm holes with 57mm centres |