Perko® Battery Selector Switches (401111)
- Voltage: 6-32V DC max
- Continuous Rating: 250 amps DC
- Intermittent Rating: 360 amps DC
Features:
BLA Code: 401111
Key Lock: No
Base Dia. mm: 134
Height mm: 67
Mount Screws mm: 5 r/h
Terminal Stud mm: 8
Perko® Battery Selector Switches (401111)
Features:
BLA Code: 401111
Key Lock: No
Base Dia. mm: 134
Height mm: 67
Mount Screws mm: 5 r/h
Terminal Stud mm: 8
You must be logged in to post a review.
Battery Boxes – Large (23662)
• Vented battery box made from hi-density reinforced polyethylene which is impervious to battery acids.
• Moulded carry handle.
• Moulded lid to provide easy cable setup.
• Includes webbing strap and stainless steel fastenings.
Features:
Part No.: 23662
Description: Large Battery Box
Outer Diamensions (mm): 410 x 225 x 280
Inside Dimensions (WxH) mm: 345 x 195 x 220
• Colour coded Red+ / Black-.
• Heavey duty dual terminal studs with connecting link.
• Base made from glass fibre reinforced nylon for strength and durability.
| PART NUMBER | STUD TYPE | COLOUR | Max current | mounting screws | L X W X H |
SAW-30220![]() |
Dual M6 Negative with Link | Black | 12V 100Amp / 48V 25Amp | M4 x 12mm S/S Round Head | 43mm x 45mm x 32.5mm |
| SAW-30220-10 | Dual M6 Negative with Link – Pack of 10 | Black | 12V 100Amp / 48V 25Amp | M4 x 12mm S/S Round Head | 43mm x 45mm x 32.5mm |
SAW-30221 ![]() |
Dual M8 Positive with Link | Red | 12V 150Amp / 48V 35Amp | M4 x 12mm S/S Round Head | 43mm x 45mm x 32.5mm |
| SAW-30221-10 | Dual M8 Positive with Link – Pack of 10 | Red | 12V 150Amp / 48V 35Amp | M4 x 12mm S/S Round Head | 43mm x 45mm x 32.5mm |

Marinco® BEP Battery Distribution Cluster with DVSR – Single Engine Two Battery Banks (113654)
Pre-wired module combining 113553 Mini Battery Selector Switch and a dual sensing Voltage Sensitive Relay. With the selector switch in position 1, it becomes the sensing battery for the VSR. When the engine is first started the relay is open and remains open until the selected battery reaches a preset 13.4 volt. The relay closes at the rated voltage providing charge to both batteries. When the selected battery voltage drops below 12.8 volt, the DVSR disengages, separating the batteries and ensuring that battery 1 is not discharged by house loads. When the selector switch is in position 2, this becomes the sensing battery and the reciprocal occurs. When the selector switch is in the both position the DVSR is inactive and the charge and load is distributed evenly between the batteries. With this system the loads are run off the same battery as the engine starting battery.
Features:
BLA Code: 113654
Base mm: 138×69
Height mm: 69
Mount Holes mm: 5 r/h
• Black UV stabilised PVC housing.
• Supplied with water resistant rubber cap and gasket.
• Flush mounting, can be mounted with or without rectangle housing.
• Relaxn blister packaging for maximum showroom appeal.
• Supplied with water resistant rubber cap.
• Accessory Cig power socket – 12V @ 20A, 24V @ 10A.
• USB – Fast charging at full speed (2.1A for iPad and 1A for iPhone/iPod).
• Compatible with all other smartphones.
• LED power indication.
• Short circuit / overheat protection.
• Supplied with two heat shrinkable spade connectors.
| PART NUMBER | DESCRIPTION | LENGTH | HEIGHT | Width |
SAW-53047![]() |
Flush Mount Dual Cigarette Lighter | 105mm | 43mm | 60mm |
| SAW-53047-10 | Flush Mount Dual Cigarette Lighter | 105mm | 43mm | 60mm |
SAW-53051![]() |
Flush Mount Cigarette Lighter + Voltmeter | 105mm | 43mm | 60mm |
| SAW-53051-10 | Flush Mount Cigarette Lighter + Voltmeter | 105mm | 43mm | 60mm |

There are no reviews yet.