-
×
Garmin AIS™ 800 Blackbox Transceiver
1 × $1,739.00
Subtotal: $1,739.00
Garmin NMEA 2000 T-connector
Add components to your NMEA 2000 network by installing our T-connector on your backbone cable. The revised version of this T-connector is offset by 45 degrees compared to the previous version.
| Weight | 0.1 kg |
|---|
You may also like…
-
Garmin, Garmin Accessories
Garmin NMEA 2000 Terminator – Female
Garmin NMEA 2000 Terminator – Female
This standard male or female NMEA 2000 light cable connector provides termination resistance for one end of the backbone of the network. Each male or female connector sold separately.
SKU: 010-11081-00 -
Related products
-
Garmin, Garmin Accessories
Garmin Heavy Duty Stainless Steel Transducer Bracket with inbuilt Spray Shield (Part No. 010-12006-11)
Garmin, Garmin AccessoriesGarmin Heavy Duty Stainless Steel Transducer Bracket with inbuilt Spray Shield (Part No. 010-12006-11)
Garmin Heavy Duty Stainless Steel Transducer Bracket with inbuilt Spray Shield (Part No. 010-12006-11)
Easily attach the Heavy Duty Stainless Steel Spray bracket as a replacement for a broken bracket or an upgrade with a built in Spray Shield to deflect spray which flies off the face of transducer.
The Garmin spray shield feature is designed to reduce excess water spray from transducers when the vessel is running at high speeds. Can be retro fitted to a wide range of common Garmin transom mounted transducers. The Heavy Duty Bracket simply replaces the fitted between current bracket and includes the inbuilt spray shield.
Easily attach your compatible 4-, 8- or 12-pin transducer to the transom of your boat with this mount that provides excellent sonar returns at all speeds. Since the transducer is in the water at all times, the mount does not protect the transducer from underwater obstructions and some drag on the boat will occur. The included transducer spray shield reduces excessive water spray from your compatible transducer when your boat is running at high speeds.
You also can mount the transducer to the step of your boat with this mount to allow angle adjustment of the transducer so it is parallel with the water surface; this will create no drag on the boat. And since the transducer is out of the water with this mounting style, sonar will not track bottom when the boat is on plane.COMPATABLE UNITS & TRANSDUCERS:
* echoMAP™ 45dv
* echoMAP™ 55dv
* echoMAP™ 75dv
* echoMAP™ 75sv
* echoMAP™ 95sv
* echoMAP™ CHIRP 45dv
* echoMAP™ CHIRP 55dv
* echoMAP™ CHIRP 75dv
* echoMAP™ CHIRP 75sv
* echoMAP™ CHIRP 95sv
* Garmin GT20-TM – Transom Mount DownVü 500 W (CHIRP 455/800 kHz) Traditional 500 W (77/200 kHz) Transducer with Temp (8-pin)
* Garmin GT21-TM – Transom Mount DownVü 500 W (CHIRP 260/455 kHz) Traditional 600 W (50/200 kHz) Transducer with Temp (8-pin)
* Garmin GT30-TM – Transom Mount DownVü/SideVü 500 W (CHIRP 455/800 kHz) Scanning Transducer with Temp (12-pin)
* Garmin GT40-TM – Transom Mount DownVü/SideVü 500 W (CHIRP 455/800 kHz) Traditional 500 W (77/200 kHz) Transducer with Temp (12-pin)
* Garmin GT41-TM – Transom Mount DownVü/SideVü 500 W (CHIRP 260/455 kHz) Traditional 600 W (50/200 kHz) Transducer with Temp (12-pin)
* Garmin GT50M-TM – Transom Mount DownVü/SideVü 500 W (CHIRP 455/800 kHz) Traditional 300 W (Mid-band CHIRP 80-160 kHz) Transducer with Temp (12-pin)
* Garmin GT51M-TM – Transom Mount DownVü/SideVü 500 W (CHIRP 260/455 kHz) Traditional 600 W (Mid-band CHIRP 80-160 kHz) Transducer with Temp (12-Pin)
*Specifications from suppliers’ information.SKU: 010-12006-11 -
EOFY, Garmin, Garmin Fishfinder, Sanctuary Cove
Garmin STRIKER Vivid 7cv with GT20-TM Transducer
Garmin STRIKER Vivid 7cv with GT20-TM Transducer – THE CHOICE IS YOURS
See fish and structure in maximum detail when you pick your display colour, your location and your sonar for your day on the water with the STRIKER Vivid 7cv fishfinder with transducer.
The sonar colour you pick says a lot about your fishing style. Good thing there are 7 new vivid options.
What a view. Use the included transducer to get CHIRP traditional and ClearVü sonars.
Never lose a hot spot again. Use waypoint marking to find your way back.
What’s under the water’s surface looks pretty good as 1-foot contours, just saying.
Wi-Fi® connection1 on land opens up a world of possibilities on the water.
SKU: 010-02552-01 -
Garmin, Garmin Accessories, Garmin Radars, Radars
Garmin Marine Heading Sensor for Radar (Part No. 010-11417-00)
Garmin, Garmin Accessories, Garmin Radars, RadarsGarmin Marine Heading Sensor for Radar (Part No. 010-11417-00)
Garmin Marine Heading Sensor for Radar [Garmin Part Number: 010-11417-00] – RRP $1200
When interfacing this 3-axis compass heading sensor to our marine lineup of MFDs and radars, mariners can expect unparalleled radar overlay performance and accuracy along with excellent MARPA capabilities.
This heading sensor (based on Airmar H2183) uses a rate gyro, so it can maintain an exceptional 2 degree heading accuracy under heavy dynamic conditions, with up to 30 degrees of pitch and roll. In addition, it supports either NMEA 0183 or NMEA 2000® data output to fit any installation.
Installation is a snap thanks to the heading sensor’s innovative design, allowing it to mount to any angled bulkhead. Mariners can expect this heading sensor to provide trouble-free service in the harshest conditions and will learn to appreciate its reliability and excellent performance.
* Note: NMEA 0183 and NMEA 2000 cables sold separately (to connect to a NMEA 2000 Network a dedicated NMEA 2000 Marine Heading Sensor Cable is required Garmin Part Number: 010-11419-00 – optional, please see related products).
THIS IS SUITABLE FOR CURRENT MODEL GARMIN GMR 18 xHD RADOME & GMR 24 xHD RADOME.
FEATURES:
* Better than 1 degree static heading accuracy
* Industry leading 2 degree dynamic accuracy up to 30 degree pitch and roll
* Three-axis solid-state compass provides accurate heading data
* Three-axis accelerometer improves heading, pitch and roll in static conditions
* Three-axis rate gyro improves heading, pitch and roll in dynamic conditions
* Temperature compensated across the entire operating range to ensure optimum accuracy
* Easy installation to any angled bulkhead
* Auto-calibration featureSPECIFICATIONS:
* Dimensions (HxLxD): 2″ (5.08 cm) x 4.4″ (11.18 cm) x 4.5″ (11.43 cm)
* Default heading output: 10 Hz for both NMEA 0183 and NMEA 2000 (NMEA 2000 can be output up to 20 Hz)
* Waterproof housing: IPX6
* Operating voltage: 9 VDC to 16 VDCWHAT’S IN THE BOX:
* Garmin Marine Heading Sensor
* DocumentationWARRANTY:
We are an authorised Australian Garmin retailer, as such Full Australian Manufacturers Warranty is applicable for this item. Please note if a Garmin unit is purchased overseas or from a non-authorised Garmin retailer you may not receive warranty coverage in Australia.*Specifications from suppliers’ information.
SKU: 010-11417-00 -
Garmin, Garmin Radars, Marine Electronics, Sanctuary Cove
Garmin Dome Radar GMR Fantom 18x – 50W 18″ Black
-8%
Garmin, Garmin Radars, Marine Electronics, Sanctuary CoveGarmin Dome Radar GMR Fantom 18x – 50W 18″ Black
Garmin Dome Radar GMR Fantom 18x – STRIKINGLY POWERFUL RADAR
These incredibly powerful 18″ and 24″ dome radars have beauty and brains with a black colour option and 50 watts of output power.
GMR Fantom brings the power. Fifty watts of it, actually.
See targets clearly, and adjust their sizes as needed.
With power save mode, you get to choose when to use full power and when to pull back.
Every second of power usage counts. Cut back even more by choosing your active times down to the second.
MotionScope™ technology shows targets in colour as they move toward you or away.
SKU: 010-02584-10
