-
×
Garmin AIS™ 800 Blackbox Transceiver
1 × $1,739.00
Subtotal: $1,739.00
Garmin NMEA 2000 Power Isolator
Use our power isolator to ensure sources that could power the bus are separated properly during installation of the NMEA 2000 network.
| Weight | 0.1 kg |
|---|
You may also like…
-
-
Garmin, Garmin Accessories
Garmin NMEA 2000 Terminator – Female
Garmin NMEA 2000 Terminator – Female
This standard male or female NMEA 2000 light cable connector provides termination resistance for one end of the backbone of the network. Each male or female connector sold separately.
SKU: 010-11081-00
Related products
-
Garmin, Garmin VHF and AIS, Marine Electronics, Sanctuary Cove, VHF & AIS
Garmin VHF 315i Marine Radio
-9%
Garmin, Garmin VHF and AIS, Marine Electronics, Sanctuary Cove, VHF & AISGarmin VHF 315i Marine Radio
Garmin VHF 315i Marine Radio – Enjoy Reliable Communication
- Reliable 25-watt VHF Class D DSC marine radio
- Includes GHS™ 11 handset and new active speaker to use as intercom between up to 3 stations
- Built-in GPS receiver
- NMEA 2000® connectivity for easy integration with compatible chartplotters and multifunction displays
- Preprogrammed with U.S., Canadian and international marine channels plus 10 NOAA weather channels
The 25-watt VHF 315i marine radio with Class D DSC is a modular communication solution. It provides the security of reliable communication and full NOAA weather alerts on the water by meeting the latest industry standards. It’s easy to use and integrates seamlessly into the Garmin onboard system. It has a built-in GPS receiver with connector for required external antenna. VHF 315i includes a GHS 11 handset and new active speaker to use as an intercom between up to 3 stations. It’s also equipped with a two-way 30-watt hailer system for communication with other boats or deckhands. NMEA 2000 connectivity enables easy integration with compatible chartplotters, multifunction displays and convenient software updates. Simplified handset connectors and an uncomplicated, easy-to-use interface allow you to get your radio set up quickly, so you can get back out on the water and start communicating.
Specs
- Dimensions: 8.1” x 7.1” x 2.4” (20.5 x 18.1 x 6.0 cm)
- Weight: 3.4 lbs. (1.53 kg)
- Operating Temperature Range: 5°F to 158°F (-15°C to 70°C)
- Water rating: IPX7
- Compass-safe Distance: 2” (5 cm)
- Digital Selective Calling: Class D
- Frequency Bands: All USA, Canadian, and international marine channels; 10 NOAA weather channels
- Operating Voltage: 9.6 – 16 Vdc
- Current Draw: Standby: 350 mA; Receive: 600 mA; Transmit High Power: 6 A max; Transmit Low Power: 2 A max
- Transmitter Power (at 13.6 Vdc): High Power: 23-25 W; Low Power: 0.7-1 W
- NMEA 2000 LEN: 1
- NMEA 0183: Yes
In the Box- VHF 315i marine radio
- GHS 11
- Cradle (for GHS 11)
- Active speaker
- Power cable
- Deck cable (10 meters)
- Microphone hanger
- Mounting hardware
- Documentation
SKU: 010-02047-01 -
Garmin, Garmin Accessories, Garmin Radars, Radars
Garmin Marine Heading Sensor for Radar (Part No. 010-11417-00)
Garmin, Garmin Accessories, Garmin Radars, RadarsGarmin Marine Heading Sensor for Radar (Part No. 010-11417-00)
Garmin Marine Heading Sensor for Radar [Garmin Part Number: 010-11417-00] – RRP $1200
When interfacing this 3-axis compass heading sensor to our marine lineup of MFDs and radars, mariners can expect unparalleled radar overlay performance and accuracy along with excellent MARPA capabilities.
This heading sensor (based on Airmar H2183) uses a rate gyro, so it can maintain an exceptional 2 degree heading accuracy under heavy dynamic conditions, with up to 30 degrees of pitch and roll. In addition, it supports either NMEA 0183 or NMEA 2000® data output to fit any installation.
Installation is a snap thanks to the heading sensor’s innovative design, allowing it to mount to any angled bulkhead. Mariners can expect this heading sensor to provide trouble-free service in the harshest conditions and will learn to appreciate its reliability and excellent performance.
* Note: NMEA 0183 and NMEA 2000 cables sold separately (to connect to a NMEA 2000 Network a dedicated NMEA 2000 Marine Heading Sensor Cable is required Garmin Part Number: 010-11419-00 – optional, please see related products).
THIS IS SUITABLE FOR CURRENT MODEL GARMIN GMR 18 xHD RADOME & GMR 24 xHD RADOME.
FEATURES:
* Better than 1 degree static heading accuracy
* Industry leading 2 degree dynamic accuracy up to 30 degree pitch and roll
* Three-axis solid-state compass provides accurate heading data
* Three-axis accelerometer improves heading, pitch and roll in static conditions
* Three-axis rate gyro improves heading, pitch and roll in dynamic conditions
* Temperature compensated across the entire operating range to ensure optimum accuracy
* Easy installation to any angled bulkhead
* Auto-calibration featureSPECIFICATIONS:
* Dimensions (HxLxD): 2″ (5.08 cm) x 4.4″ (11.18 cm) x 4.5″ (11.43 cm)
* Default heading output: 10 Hz for both NMEA 0183 and NMEA 2000 (NMEA 2000 can be output up to 20 Hz)
* Waterproof housing: IPX6
* Operating voltage: 9 VDC to 16 VDCWHAT’S IN THE BOX:
* Garmin Marine Heading Sensor
* DocumentationWARRANTY:
We are an authorised Australian Garmin retailer, as such Full Australian Manufacturers Warranty is applicable for this item. Please note if a Garmin unit is purchased overseas or from a non-authorised Garmin retailer you may not receive warranty coverage in Australia.*Specifications from suppliers’ information.
SKU: 010-11417-00 -
Garmin, Garmin Accessories
Garmin Heavy Duty Stainless Steel Transducer Bracket with inbuilt Spray Shield (Part No. 010-12006-11)
Garmin, Garmin AccessoriesGarmin Heavy Duty Stainless Steel Transducer Bracket with inbuilt Spray Shield (Part No. 010-12006-11)
Garmin Heavy Duty Stainless Steel Transducer Bracket with inbuilt Spray Shield (Part No. 010-12006-11)
Easily attach the Heavy Duty Stainless Steel Spray bracket as a replacement for a broken bracket or an upgrade with a built in Spray Shield to deflect spray which flies off the face of transducer.
The Garmin spray shield feature is designed to reduce excess water spray from transducers when the vessel is running at high speeds. Can be retro fitted to a wide range of common Garmin transom mounted transducers. The Heavy Duty Bracket simply replaces the fitted between current bracket and includes the inbuilt spray shield.
Easily attach your compatible 4-, 8- or 12-pin transducer to the transom of your boat with this mount that provides excellent sonar returns at all speeds. Since the transducer is in the water at all times, the mount does not protect the transducer from underwater obstructions and some drag on the boat will occur. The included transducer spray shield reduces excessive water spray from your compatible transducer when your boat is running at high speeds.
You also can mount the transducer to the step of your boat with this mount to allow angle adjustment of the transducer so it is parallel with the water surface; this will create no drag on the boat. And since the transducer is out of the water with this mounting style, sonar will not track bottom when the boat is on plane.COMPATABLE UNITS & TRANSDUCERS:
* echoMAP™ 45dv
* echoMAP™ 55dv
* echoMAP™ 75dv
* echoMAP™ 75sv
* echoMAP™ 95sv
* echoMAP™ CHIRP 45dv
* echoMAP™ CHIRP 55dv
* echoMAP™ CHIRP 75dv
* echoMAP™ CHIRP 75sv
* echoMAP™ CHIRP 95sv
* Garmin GT20-TM – Transom Mount DownVü 500 W (CHIRP 455/800 kHz) Traditional 500 W (77/200 kHz) Transducer with Temp (8-pin)
* Garmin GT21-TM – Transom Mount DownVü 500 W (CHIRP 260/455 kHz) Traditional 600 W (50/200 kHz) Transducer with Temp (8-pin)
* Garmin GT30-TM – Transom Mount DownVü/SideVü 500 W (CHIRP 455/800 kHz) Scanning Transducer with Temp (12-pin)
* Garmin GT40-TM – Transom Mount DownVü/SideVü 500 W (CHIRP 455/800 kHz) Traditional 500 W (77/200 kHz) Transducer with Temp (12-pin)
* Garmin GT41-TM – Transom Mount DownVü/SideVü 500 W (CHIRP 260/455 kHz) Traditional 600 W (50/200 kHz) Transducer with Temp (12-pin)
* Garmin GT50M-TM – Transom Mount DownVü/SideVü 500 W (CHIRP 455/800 kHz) Traditional 300 W (Mid-band CHIRP 80-160 kHz) Transducer with Temp (12-pin)
* Garmin GT51M-TM – Transom Mount DownVü/SideVü 500 W (CHIRP 260/455 kHz) Traditional 600 W (Mid-band CHIRP 80-160 kHz) Transducer with Temp (12-Pin)
*Specifications from suppliers’ information.SKU: 010-12006-11 -
Garmin, Garmin Radars, Marine Electronics, Sanctuary Cove
Garmin Dome Radar GMR Fantom 18x – 50W 18″ White
-6%
Garmin, Garmin Radars, Marine Electronics, Sanctuary CoveGarmin Dome Radar GMR Fantom 18x – 50W 18″ White
Garmin Dome Radar GMR Fantom 18x – 50W 18″ White – STRIKINGLY POWERFUL RADAR
These incredibly powerful 18″ and 24″ dome radars have beauty and brains with a black colour option and 50 watts of output power.
GMR Fantom brings the power. Fifty watts of it, actually.
See targets clearly, and adjust their sizes as needed.
With power save mode, you get to choose when to use full power and when to pull back.
Every second of power usage counts. Cut back even more by choosing your active times down to the second.
MotionScope™ technology shows targets in colour as they move toward you or away.
SKU: 010-02584-00