Lowrance / Simrad NAC-2 Rudder feedback cable
Used to connect resistive rudder feedback units to either NAC-1 or NAC-2. 3 Pin connector to 3 bare wires. 2 m (6.5 ft)
$70.00
Used to connect resistive rudder feedback units to either NAC-1 or NAC-2. 3 Pin connector to 3 bare wires. 2 m (6.5 ft)
| Weight | 0.6 kg |
|---|
It contains the control algorithms developed to drive a boat across a broad range of weather conditions and sea-states, alongside the electronics needed to operate a hydraulic or mechanical drive unit, while also interfacing with other components including heading sensors and rudder feedback units. It was designed for boats up to 33 feet in length and is suitable for low-current hydraulic drives, mechanical drives, or solenoid valves with a current rating of 8 Amps continuous (12 Amps peak).
Key FeaturesStay safe and connected with this VHF marine radio featuring a sleek design with removable fist mic, Class D DSC functionality, and built-in GPS. Keep track of nearby AIS-equipped vessels with an integrated AIS receiver, and add up to two optional wireless handsets to communicate clearly from anywhere on board.
A dual-channel AIS receiver monitors the position of nearby AIS-equipped vessels, helping you to avoid collisions in crowded harbours and waterways. AIS information can be viewed on the RS40’s built-in screen, or overlaid on your chart or radar screen through a compatible multifunction display. An integrated GPS receiver ensures your boat’s location can be sent with DSC distress calls, even if the rest of your on-board electronics are powered down.
The RS40’s removable fist mic can be connected to the front or rear of the radio, and optional extension cables allow the radio and mic to be mounted separately. This offers a simple and cost-effective solution for any mounting location, with no cable clutter. For example, the RS40 can be mounted overhead, with no hanging cables, while the mic is connected to an extension socket on the dash below.
Add an optional wireless handset to take your radio anywhere on board. The HS40 handset was designed as an intuitive portable companion to the RS40. Each handset duplicates your radio’s display and controls, enabling remote access to all key functions. Up to two wireless handsets can be connected to a single base station. With multiple handsets connected, the RS40 doubles as a handy on-board intercom.
RS40 VHF Removable Fist Mic
RS40/V60 VHF Mounting bracket with Knobs and ScrewsFor Radomes, Open Array and small SatCom/TV Antenna
Expertly designed to install your antenna on the cabin roof, flybridge or radar arch of your powerboat, providing a clear view of the horizon for maximum antenna performance.
Scanstrut’s Composite PowerTower offers a single “monocoque” structure for outstanding strength and surface finish. Its aerodynamic shape and high gloss finish makes a product that is as strong as it is attractive.
Watertight Installation
Pre-fitted IP65 gland to seal cable entry into stem and a watertight base seal included so no need for messy sealant.
Ease of Install
Pre-drilled mounting holes, the antenna fastens to PowerTower top plate using own mounting bolts.
Choice of Heights
150mm (6”) or 350mm (14”) heights available.
Aesthetic Single Piece Moulding
Curves and strength to suit any boat with a 30° aft leaning profile to compliment any powerboat.

This compact module provides an all-in-one solution for adding best-in-class StructureScan HD and CHIRP sonar capabilities to compatible Lowrance fishfinder/chartplotter displays. A plug-and-play, all-in-one network solution makes it easier than ever to identify productive fishing areas. Transducers are sold separately.
