JABSCO Par Max Fresh Water Pressure Pump 
- 11.3 litres per minute 40 PSI
- Quiet operation
- Can be run dry for periods
- Self primes to 2.4 Mtrs (8 ft)
- Built-in bypass lowers pulsatio
- No need for an accumulator

Our most popular freshwater pressure pump – the ideal pump for providing freshwater automatically on pleasure craft up to approx 9 metres. Now includes a 40 mesh plug-in inlet strainer in the box with the pump.Triplex 3 chamber automatic pressure pump gives fl ow up to 3 US Gallons per minute (11.3 litres per minute) and pressure up to 40 PSI. Serves up to 3 x 12mm outlets including galley, shower and additional faucet. The Par-Max 3.0 gives very smooth water fl ow even at low demand due to its built-in pulsation dampening by-pass valve which controls unwanted cycling and reduces noise. Inlet fi lter, corrosion resistant motor, soft rubber vibration dampening mounts and quick connect plug-in hose ports included – 2 x 12mm barbed for hose. 12 volt. 25 PSI cut-in, 40 PSI cut-out pressure.
| Size | 2.9GPM, 3.5GPM |
|---|
Whale® Premium Submersible Pump – 13.2LPM 12V (133102)
A compact, highly efficient centrifugal pump with high performance. Designed to be dropped into a water tank or container, this submersible pump has a built-in strainer to prevent suspended particles from entering the system. Suitable for fresh water, saltwater and diesel transfer. Constructed from ABS plastic, stainless steel and nitrile rubber. Suitable for use with 3⁄8″ or ½” I.D. hose. For connection to system 15 use adaptor 136638. One year warranty.
Features :
BLA Code : 133102
Cap Open Flow l/m : 13.2
Power:
v-12
amp-3.6
Length mm : 117
Overall Dia. mm : 36
TMC Anglers Aerator – 250GPH 12V (131714)
Portable single piece live bait aerator to suit almost any application. Supplied with 1.2 metres of electrical wire fitted with alligator clips. 12 volt, 16 l/m (250 US gph) submersible pump fitted with three suction cup mounts and riser spray tube with adjustable flow control. Every pump is water tested to ensure volume and amp draw are within specification.
Features :
BLA Code : 131714
N.B. As with all submersible electric’s, attention is needed during installation to ensure that wiring connections remain above water level.
BILGE PUMP INSTALLATION KIT – 3/4″
Submersible bilge pump plumbing installation kit. Suits 19mm (3/4″). Includes 6 feet (1.8Mtr) of 19mm cuffed/convulted hose. 1 x 3/4″ nylon skin fitting and 2 x 3/4″ x stainless steel hose clamps.
Whale® In-line Electric Pump – 13.2LPM 12V (133106)
Designed for confined spaces, these pumps can be fitted below a water tank and gravity-primed, or above the water tank with a manual priming pump. Can be fitted in-line with a submersible pump to boost the performance when higher pressure for a shower/water heater is needed. Constructed from ABS plastic, stainless steel and nitrile rubber. Suitable for diesel, fresh water or saltwater. For connection to system 15 adaptor use 136638. One year warranty.
Features :
BLA Code : 133106
Capacity Open Flow l/m : 13.2
Power:
v-12
amp-3.6
Hose Size:
mm-10
in-3⁄8
Length mm : 144
Overall Dia.mm : 36
