Humminbird HELIX 7 Gimbal Mount
The GM H7 is a plastic gimbal mount for all HELIX 7 Series products. This includes the gimbal mount, knobs and mounting hardware.
- Compatible with: All HELIX 7 Series
- 1-Year Limited Warranty
| Weight | 0.4 kg |
|---|
Related products
-
Humminbird, Humminbird Accesories
Humminbird AS GPS HS – External GPS Receiver With Heading Sensor
Humminbird AS GPS HS – External GPS Receiver With Heading Sensor
The AS GPS HS is a precision GPS receiver with heading sensor provides fast position fixes with an accuracy within 2.5 meters. An internal compass also provides constant boat heading displayed on your Humminbird chart screen, even while sitting still. This heading sensor makes it easy to understand your boat’s direction in correlation to the GPS chart for precision boat control.
- Compatible with the following models: all SOLIX Series (with AS GPS NMEA adapter), all HELIX 12 Series, all HELIX 10 Series, all HELIX 9 Series, all HELIX 8 Series, all HELIX 7 G2N & G3N Series, all MEGA 360 Imaging models, all 360 Imaging models, all ONIX Series*, 859ci HD Combo, 859ci HD DI Combo, 859ci HD XD Combo, 899ci HD SI Combo, 959ci HD Combo, 959ci HD DI Combo, 959ci HD XD Combo, 999ci HD SI Combo, 1159ci HD Combo, 1159ci HD DI Combo, 1159ci HD XD Combo, 1199ci HD SI Combo
- Receiver dimensions: 3.25″ diameter, 1.5″ high and comes with 20′ cable and has a 1″-14 thread count stem mountable with an optional antenna stem (antenna stem not included).
- This receiver requires software 6.570 or higher in the compatible Humminbird product.
- Note: SOLIX and ONIX Series require purchase of AS GPS NMEA cable for connection.
- Note: this GPS receiver WILL NOT work with InterLink.
- 1-Year Limited Warranty
Installation Guide
Humminbird Accesorry Resource Guide
Humminbird GPS Heading Sensor – Why You Should Install One
SKU: 101088 -
Humminbird, Humminbird Accesories
Humminbird APEX 16 Rear Mounting Kit
Humminbird APEX 16 Rear Mounting Kit
The IDMK RM A16 is an in-dash mounting solution for APEX 16 models where a rear-mounted bracket solution is desired for installation. This product provides a secure fit of the APEX control head to the mounting surface and provides a clean and finished look at the helm.
- Compatible with: All APEX 16 models
- Includes a reinforced, aluminum mounting bracket with stainless steel mounting hardware.
- 1-Year Limited Warranty
Humminbird Accesorry Resource Guide
SKU: 103065 -
Humminbird, Humminbird Accesories
Humminbird HELIX 8/9 In-Dash Mounting Kit
Humminbird HELIX 8/9 In-Dash Mounting Kit
The IDMK H89R is a rigid and reinforced in-dash mounting kit for HELIX 8 and select HELIX 9 Series fish finders, complete with bracket and hardware. This provides a secure and finished look for in-dash mounting of your Humminbird fish finder. This product will only HELIX 9 G3N models and will not support previous generation of HELIX 9 fish finders.
- Compatible with: HELIX 9 MSI GPS G3N, HELIX 9 MDI GPS G3N, HELIX 9 CHIRP GPS G3N, HELIX 8 MSI GPS G3N, HELIX 8 MDI GPS G3N, HELIX 8 CHIRP GPS G3N
- 1-Year Limited Warranty
SKU: 103058 -
Humminbird, Humminbird Accesories
Humminbird SOLIX / APEX Side Imaging Left-Right Splitter Cable
Humminbird SOLIX / APEX Side Imaging Left-Right Splitter Cable
The 14 M ID SIDB Y cable allows for the installation of a separate 2D transducer paired with a Humminbird MEGA Imaging or non-MEGA Imaging transducer and connect both transducers to a single Humminbird control head. This y-cable provides the ability to install a separate high-speed Humminbird 2D transducer for high-speed depth reading and sonar performance. Alternatively, this cable can also be used to add an accessory Airmar® 2D transducer to a Humminbird control head that also has a Side or Down Imaging transducer connected at the same time. This cable supports Transducer ID for automatic recognition and easy setup of Airmar® accessory transducers.
- Compatible with: All SOLIX and APEX models
- Combines a MEGA Side Imaging transducer (or non-MEGA Imaging) and accessory 2D transducer and allows them to be connected to a single Humminbird control head.
- Automatically provides Side Imaging, Down Imaging and temperature from the standard all-in-one transducer and sources 2D sonar and digital depth from the 2D accessory transducer, without the need to switch data sources manually
- Includes Transducer ID for Airmar® accessory transducers, which automatically recognizes transducer type for easy installation and setup.
- Cable length: 30″ (76 cm)
- 1-Year Limited Warranty
Humminbird Accesorry Resource Guide
SKU: 103070
