Heavy-Duty Battery Trays (23670)
• Heavy-duty reinforced plastic trays with stainless steel mounting screws.
Features:
Part No.: 23670
Description: Small Heavy-Duty Battery Tray
Inside Dimensions (WxH) mm: 280 x 175 x 220
In stock
$9.30
In stock
CompareHeavy-Duty Battery Trays (23670)
• Heavy-duty reinforced plastic trays with stainless steel mounting screws.
Features:
Part No.: 23670
Description: Small Heavy-Duty Battery Tray
Inside Dimensions (WxH) mm: 280 x 175 x 220
You must be logged in to post a review.
Heavy-Duty Battery Trays (23672)
• Heavy-duty reinforced plastic trays with stainless steel mounting screws.
Features:
Part No.: 23672
Description: Large Heavy-Duty Battery Tray
Inside Dimensions (WxH) mm: 320 x 180 x 230
Battery Boxes – Extra Large (23665)
• Vented battery box made from hi-density reinforced polyethylene which is impervious to battery acids.
• Moulded carry handle.
• Moulded lid to provide easy cable setup.
• Includes webbing strap and stainless steel fastenings.
Features:
Part No.: 23665
Description: Extra Large Battery Box
Outer Diamensions (mm): 450 x 215 x 225
Inside Dimensions (WxH) mm: 385 x 180 x 195
IN STORE PICK UP ONLY
Maintenance-Free marine battery with superior starting power and reserve capacity. For heavy-duty marine use.
Features
TYPE | V | MCA | CCA |
RC |
AH | OVERALL DIMENSIONS (mm) L W H TH |
MFM50 | 12 | 800 | 640 | 140 | 80 | 259 x 173 x 205 x 227 |
MFM70 | 12 | 900 | 720 | 160 | 95 | 305 x 174 x 205 x 227 |
* Please contact Northside Marine Boating Parts & Accessories on 07 3265 8016 regarding possible freight as these are acid filled.
Marinco® BEP Battery Distribution Cluster with DVSR – Single Engine Two Battery Banks (113654)
Pre-wired module combining 113553 Mini Battery Selector Switch and a dual sensing Voltage Sensitive Relay. With the selector switch in position 1, it becomes the sensing battery for the VSR. When the engine is first started the relay is open and remains open until the selected battery reaches a preset 13.4 volt. The relay closes at the rated voltage providing charge to both batteries. When the selected battery voltage drops below 12.8 volt, the DVSR disengages, separating the batteries and ensuring that battery 1 is not discharged by house loads. When the selector switch is in position 2, this becomes the sensing battery and the reciprocal occurs. When the selector switch is in the both position the DVSR is inactive and the charge and load is distributed evenly between the batteries. With this system the loads are run off the same battery as the engine starting battery.
Features:
BLA Code: 113654
Base mm: 138×69
Height mm: 69
Mount Holes mm: 5 r/h
There are no reviews yet.