Marinco® BEP Contour Heavy Duty Battery Master Switch (113551) Subtotal: $199.90
-2%
Heavy-Duty Battery Trays (23670)
• Heavy-duty reinforced plastic trays with stainless steel mounting screws.
Features:
Part No.: 23670
Description: Small Heavy-Duty Battery Tray
Inside Dimensions (WxH) mm: 280 x 175 x 220
Based on 0 reviews
Be the first to review “Heavy-Duty Battery Trays (23670)”
You must be logged in to post a review.
Related products
-
12V Accessories, Electrical
Relaxn Flush Mount Power Outlet Dual Socket
Relaxn Flush Mount Power Outlet Dual Socket
• Black UV stabilised PVC housing.
• Supplied with water resistant rubber cap and gasket.
• Flush mounting, can be mounted with or without rectangle housing.
• Relaxn blister packaging for maximum showroom appeal.
• Supplied with water resistant rubber cap.
• Accessory Cig power socket – 12V @ 20A, 24V @ 10A.
• USB – Fast charging at full speed (2.1A for iPad and 1A for iPhone/iPod).
• Compatible with all other smartphones.
• LED power indication.
• Short circuit / overheat protection.
• Supplied with two heat shrinkable spade connectors.PART NUMBER DESCRIPTION LENGTH HEIGHT Width SAW-53047 
Flush Mount Dual Cigarette Lighter 105mm 43mm 60mm SAW-53047-10 Flush Mount Dual Cigarette Lighter 105mm 43mm 60mm SAW-53051 
Flush Mount Cigarette Lighter + Voltmeter 105mm 43mm 60mm SAW-53051-10 Flush Mount Cigarette Lighter + Voltmeter 105mm 43mm 60mm SKU: SAW-53047, SAW-53047-10, SAW-53051, SAW-53051-10 -
-
Electrical, Switches
Marinco® BEP Contour Heavy Duty Battery Master Switch (113551)
Marinco® BEP Contour Heavy Duty Battery Master Switch (113551)
The 720 heavy duty Contour Master Switch is designed for larger vessels with higher amp loads. It
offers 600 amps continuous and 2500 amps cranking capacity. The switch can be recess mounted in a
85mm hole or surface mounted. Screw holes 5mm roundhead. Interchangeable labelling system on the
control knob allows a full range of applications. Switches come standard with the battery symbol label.
Alternative label sets 113690 and 113691 are available. Removable rear cover insulates the rear
terminals against any short circuits and ensures the switch meets ABYC requirements. Non corrosive
construction, self cleaning sliding contacts. Ignition protected.Features:
BLA Code: 113551
Continuous rating: 600 amps DC
Intermittent rating: 800 amps DC
Cranking rating: 2500 amps DC for 10 seconds
Voltage rating: 48 volts DC maximum
Terminal stud size: 2 x 12mmSKU: 113551 -
Electrical, Switches
Marinco® BEP Battery Distribution Cluster with DVSR – Single Engine Two Battery Banks (113654)
Electrical, SwitchesMarinco® BEP Battery Distribution Cluster with DVSR – Single Engine Two Battery Banks (113654)
Marinco® BEP Battery Distribution Cluster with DVSR – Single Engine Two Battery Banks (113654)
Pre-wired module combining 113553 Mini Battery Selector Switch and a dual sensing Voltage Sensitive Relay. With the selector switch in position 1, it becomes the sensing battery for the VSR. When the engine is first started the relay is open and remains open until the selected battery reaches a preset 13.4 volt. The relay closes at the rated voltage providing charge to both batteries. When the selected battery voltage drops below 12.8 volt, the DVSR disengages, separating the batteries and ensuring that battery 1 is not discharged by house loads. When the selector switch is in position 2, this becomes the sensing battery and the reciprocal occurs. When the selector switch is in the both position the DVSR is inactive and the charge and load is distributed evenly between the batteries. With this system the loads are run off the same battery as the engine starting battery.
Features:
BLA Code: 113654
Base mm: 138×69
Height mm: 69
Mount Holes mm: 5 r/hSKU: 113654
There are no reviews yet.