-
×
Marinco® BEP Digital Voltage Sensing Relay (113668)
1 × $219.00
Subtotal: $219.00
FriLight Switches
Two position rocker switch in single or double configuration. 12 volt.
|
BLA CODE
|
TRIM COLOUR
|
SWITCH
|
|---|---|---|
122420 |
White | Single |
122422 |
Chrome | Single |
122430 |
Chrome | Twin |
| Options | White Single, Chrome Single, Chrome Twin |
|---|
Based on 0 reviews
Be the first to review “FriLight Switches”
You must be logged in to post a review.
Related products
-
12V Accessories, Electrical
Relaxn Heavy-Duty Dual Terminal Stud
Relaxn Heavy-Duty Dual Terminal Stud
• Colour coded Red+ / Black-.
• Heavey duty dual terminal studs with connecting link.
• Base made from glass fibre reinforced nylon for strength and durability.PART NUMBER STUD TYPE COLOUR Max current mounting screws L X W X H SAW-30220 
Dual M6 Negative with Link Black 12V 100Amp / 48V 25Amp M4 x 12mm S/S Round Head 43mm x 45mm x 32.5mm SAW-30220-10 Dual M6 Negative with Link – Pack of 10 Black 12V 100Amp / 48V 25Amp M4 x 12mm S/S Round Head 43mm x 45mm x 32.5mm SAW-30221 
Dual M8 Positive with Link Red 12V 150Amp / 48V 35Amp M4 x 12mm S/S Round Head 43mm x 45mm x 32.5mm SAW-30221-10 Dual M8 Positive with Link – Pack of 10 Red 12V 150Amp / 48V 35Amp M4 x 12mm S/S Round Head 43mm x 45mm x 32.5mm SKU: SAW-30220, SAW-30220-20, SAW-30221, SAW-30221-20 -
Boxes/Trays, Electrical
Battery Boxes – Small (23661)
Battery Boxes – Small (23661)
• Vented battery box made from hi-density reinforced polyethylene which is impervious to battery acids.
• Moulded carry handle.
• Moulded lid to provide easy cable setup.
• Includes webbing strap and stainless steel fastenings.Features:
Part No.: 23661
Description: Standard Battery Box
Outer Diamensions (mm): 335 x 220 x 250
Inside Dimensions (WxH) mm: 290 x 195 x 195SKU: 23661 -
Electrical, Switches
Marinco® BEP Digital Voltage Sensing Relay (113668)
Marinco® BEP Digital Voltage Sensing Relay (113668)
- Safely charge two or more independent battery banks from one charge source (alternator, battery charger)
- Charges engine starting batteries before combining auxiliary bank for charging
- Protects start batteries from becoming flattened by domestic loads
- Isolates electronics from harmful electrical surges from starter motors
- Simple to install 3 wire connection, leaves alternator wiring intact
- No volt drop vs. diode isolators
- Ignition protected
- Surface or panel mountable
- Replaces previous models 113646, 113647 and 113649
Features:
BLA Code: 113668
LxWxH mm: 69x69x50
Volts V: 12/24
Rating (A) Continuous: 125
Rating (A) Intermittent: 140
Engages V DC: 13.4/26.8
Disengages V DC: 12.8/25.6SKU: 113668 -
Electrical, Switches
Marinco® BEP Battery Distribution Cluster with DVSR – Single Engine Two Battery Banks (113654)
Electrical, SwitchesMarinco® BEP Battery Distribution Cluster with DVSR – Single Engine Two Battery Banks (113654)
Marinco® BEP Battery Distribution Cluster with DVSR – Single Engine Two Battery Banks (113654)
Pre-wired module combining 113553 Mini Battery Selector Switch and a dual sensing Voltage Sensitive Relay. With the selector switch in position 1, it becomes the sensing battery for the VSR. When the engine is first started the relay is open and remains open until the selected battery reaches a preset 13.4 volt. The relay closes at the rated voltage providing charge to both batteries. When the selected battery voltage drops below 12.8 volt, the DVSR disengages, separating the batteries and ensuring that battery 1 is not discharged by house loads. When the selector switch is in position 2, this becomes the sensing battery and the reciprocal occurs. When the selector switch is in the both position the DVSR is inactive and the charge and load is distributed evenly between the batteries. With this system the loads are run off the same battery as the engine starting battery.
Features:
BLA Code: 113654
Base mm: 138×69
Height mm: 69
Mount Holes mm: 5 r/hSKU: 113654
There are no reviews yet.