BLA Cross Bollards – Cast Alloy
Inexpensive non polished die-cast alloy construction. Suitable as a weld on fitting for aluminium boat manufacturers.
|
BLA CODE
|
SHAFT MM
|
HEIGHT MM
|
BASE DIA. MM
|
|---|---|---|---|
| BLA-192142 | 20 | 83 | 55 x 58 |
| Weight | 2 kg |
|---|---|
| Width | 80mm, 100mm, 142mm |
| Pack Size | Single, 20 |
Related products
-
Anchoring and Mooring, Anchors
BLA Folding Anchor – Galvanised
BLA Folding Anchor – Galvanised
Most suitable for use with inflatable boats, canoes, kayaks or small dinghies where space is at a premium. Assembled in seconds. Hot dipped galvanised cast iron construction.
BLA CODEWEIGHT KGA MMB MM146470 
0.7 185 165 146472 
1.5 310 290 146474 
2.5 360 320 146476 
3.2 400 360 146478 
4 450 410 SKU: 146470, 146472, 146474, 146476, 146478 -
Anchoring and Mooring, Fenders, Floats, Buoys, Boat Hooks
SAW Fastfender 32 Hanger Clips
SAW Fastfender 32 Hanger ClipsEasy one hand use, these FastFender clips make it easy to attach fenders to rails up to 32mm in diameter.
- Suits 6-10mm rope.
- Resistant to seawater and UV rays.
- Attach and remove boat fenders quickly.
- Suitable for boats, yachts, cruisers and motorboats.
- Available in three colours.
PART NUMBER COLOUR WEIGHT DIMENSIONS SAW-37587BLK Black 120g 158mm x 72mm x 40mm SAW-37587BLU Blue 120g 158mm x 72mm x 40mm SAW-37587LG Light Grey 120g 158mm x 72mm x 40mm SKU: SAW-37587BLK, SAW-37587BLU, SAW-37587LG -
Anchoring and Mooring, Bollards and Cleats
SAW Weld On Alloy Cleat
SAW Weld On Alloy Cleat
Cast Alloy Cleat – Weld On (Medium).
- Marine grade alloy.
- Weld cleat directly to the deck and paint for a desired finish.
- Pilot hole dimples underneath
PART NUMBER PACK SIZE L X W X H BASE SAW-293719 
Single 230mm x 75mm x 65mm 125mm x 75mm SAW-293719-BULK 20 230mm x 75mm x 65mm 125mm x 75mm SKU: SAW-293719, SAW-293719-BULK -
Anchoring and Mooring
Anchor Swivel Connector – 316 Stainless Steel suits 10-12mm Chain (110332)
Anchor Swivel Connector – 316 Stainless Steel suits 10-12mm Chain (110332)
- Pulls easily over bow roller.
- Pins removed using allen wrench.
- 316G Stainless Steel.
- Stamped with rated load.
Part No. 110332 Length (A) 97mm Width (D) 37mm Suits Chain Size 10mm Chain End (B) 14mm Anchor End (C) 23mm Pin Diameter Short (E) / Long (F) 10mm / 12mm Safe Working Load 1250kg Note Use with Loctite thread adhesive. SKU: 110332
