BLA Cross Bollards – Cast Alloy
Inexpensive non polished die-cast alloy construction. Suitable as a weld on fitting for aluminium boat manufacturers.
|
BLA CODE
|
SHAFT MM
|
HEIGHT MM
|
BASE DIA. MM
|
|---|---|---|---|
| BLA-192142 | 20 | 83 | 55 x 58 |
| Weight | 2 kg |
|---|---|
| Width | 80mm, 100mm, 142mm |
| Pack Size | Single, 20 |
Related products
-
Anchoring and Mooring, Fenders, Floats, Buoys, Boat Hooks
BLA Anchor Retriever – 250mm Styrene Float
BLA Anchor Retriever
Used in conjunction with existing anchoring tackle, the stainless steel ring fits around the anchor rode for deep water anchoring. Motoring forward at 5 to 6 knots lifts the anchor to the float ring. When the anchor chain has fully passed through the ring the anchor is held at the surface. This allows easy retrieval of the anchor rode without the continuous weight of ground tackle.
BLA CODEFLOAT DIA.MMRING DIA. MM144301 
250 125 144302 300 125 SKU: 144301 -
Anchoring and Mooring, Fenders, Floats, Buoys, Boat Hooks
BLA Anchor Retriever – 300mm Styrene Float
-10%
Anchoring and Mooring, Fenders, Floats, Buoys, Boat HooksBLA Anchor Retriever – 300mm Styrene Float
BLA Anchor Retriever
Used in conjunction with existing anchoring tackle, the stainless steel ring fits around the anchor rode for deep water anchoring. Motoring forward at 5 to 6 knots lifts the anchor to the float ring. When the anchor chain has fully passed through the ring the anchor is held at the surface. This allows easy retrieval of the anchor rode without the continuous weight of ground tackle.
BLA CODEFLOAT DIA.MMRING DIA. MM144301 250 125 144302 300 125 SKU: 144302 -
Anchoring and Mooring, Bollards and Cleats
SAW Stainless Steel Split Bollard – No Pin
SAW Stainless Steel Split Bollard – No Pin
316 marine-grade stainless steel cross bollard featuring a split for securing anchor chain through the centre.
This split bollard will accept chain links from 8mm to 10mm.
PART NUMBER BASE DIMENSIONS WIDTH HEIGHT MOUNTING HOLES SAW-29101 
62mm x 62mm 94mm 84mm 4 x 6mm – hole centres are 41mm apart SKU: SAW-29101 -
Anchoring and Mooring, Anchors
BLA Plough Anchor – Galvanised
BLA Plough Anchor – Galvanised
Ideal for sand and mud. Provides safe and sure anchoring for heavier craft. Fitted with retrieval eye for ease of removal if snagged. Heavy duty hot dipped galvanised finish with lead filled tip. Anchor size refers to approximate weight in pounds.
BLA CODESIZEAPPROX. BOAT LENGTH MWEIGHT APPROX. KGA MMB MMC MMD MM146152 
10P 5 4.5 200 550 200 270 146154 
15P 7 6.8 250 580 255 280 146156 
20P 8 9 280 700 270 350 146158 
27P 9 12.3 325 760 290 380 146160 
35P 11 15.9 375 790 330 400 146162 
45P 13 20.4 395 850 335 440 146164 
60P 15 27.2 450 940 375 470 146166 
80P 16 36.3 490 1060 400 520 146168 
100P 17 45.4 490 1120 400 570 SKU: 146152, 146154, 146156, 146158, 146160, 146162, 146164, 146166, 146168
