-
×
SAW Hinged Bow Roller - Stainless Steel
1 × $195.00
Subtotal: $195.00
BLA Cross Bollards – Cast Alloy
Inexpensive non polished die-cast alloy construction. Suitable as a weld on fitting for aluminium boat manufacturers.
|
BLA CODE
|
SHAFT MM
|
HEIGHT MM
|
BASE DIA. MM
|
|---|---|---|---|
| BLA-192142 | 20 | 83 | 55 x 58 |
| Weight | 2 kg |
|---|---|
| Width | 80mm, 100mm, 142mm |
| Pack Size | Single, 20 |
Related products
-
Anchoring and Mooring, Bollards and Cleats
SAW Stainless Steel Split Bollard – No Pin
SAW Stainless Steel Split Bollard – No Pin
316 marine-grade stainless steel cross bollard featuring a split for securing anchor chain through the centre.
This split bollard will accept chain links from 8mm to 10mm.
PART NUMBER BASE DIMENSIONS WIDTH HEIGHT MOUNTING HOLES SAW-29101 
62mm x 62mm 94mm 84mm 4 x 6mm – hole centres are 41mm apart SKU: SAW-29101 -
Anchoring and Mooring, Fenders, Floats, Buoys, Boat Hooks
BLA Anchor Retriever – 300mm Styrene Float
-10%
Anchoring and Mooring, Fenders, Floats, Buoys, Boat HooksBLA Anchor Retriever – 300mm Styrene Float
BLA Anchor Retriever
Used in conjunction with existing anchoring tackle, the stainless steel ring fits around the anchor rode for deep water anchoring. Motoring forward at 5 to 6 knots lifts the anchor to the float ring. When the anchor chain has fully passed through the ring the anchor is held at the surface. This allows easy retrieval of the anchor rode without the continuous weight of ground tackle.
BLA CODEFLOAT DIA.MMRING DIA. MM144301 250 125 144302 300 125 SKU: 144302 -
Anchoring and Mooring, Anchors
BLA Folding Anchor – Galvanised
BLA Folding Anchor – Galvanised
Most suitable for use with inflatable boats, canoes, kayaks or small dinghies where space is at a premium. Assembled in seconds. Hot dipped galvanised cast iron construction.
BLA CODEWEIGHT KGA MMB MM146470 
0.7 185 165 146472 
1.5 310 290 146474 
2.5 360 320 146476 
3.2 400 360 146478 
4 450 410 SKU: 146470, 146472, 146474, 146476, 146478 -
Anchoring and Mooring, Bollards and Cleats
SAW Standard Duty Cleats – Stainless Steel
SAW Standard Duty Cleats – Stainless Steel
Highly Polished 316G stainless steel finish.
PART NUMBER DESCRIPTION LENGTH WIDTH SAW-29175 
6”(150mm) 316 S/S Cleat 150mm 45mm SAW-29176 8”(200mm) O/Base Stainless Steel Cleat 316 200mm 55mm SAW-29177 316 25cm O/Base Stainless Steel Cleat 250mm 67mm SAW-29179 300mm 316 Stainless Steel Cleat 300mm 87mm SKU: SAW-29175, SAW-29176, SAW-29177, SAW-29179
