-
×
SAW Stainless Steel Split Bollard - No Pin
1 × $82.00
Subtotal: $82.00
BLA Cross Bollards – Cast Alloy
Inexpensive non polished die-cast alloy construction. Suitable as a weld on fitting for aluminium boat manufacturers.
|
BLA CODE
|
SHAFT MM
|
HEIGHT MM
|
BASE DIA. MM
|
|---|---|---|---|
| BLA-192142 | 20 | 83 | 55 x 58 |
| Weight | 2 kg |
|---|---|
| Width | 80mm, 100mm, 142mm |
| Pack Size | Single, 20 |
Related products
-
Anchoring and Mooring, Anchors
BLA Folding Anchor – Galvanised
BLA Folding Anchor – Galvanised
Most suitable for use with inflatable boats, canoes, kayaks or small dinghies where space is at a premium. Assembled in seconds. Hot dipped galvanised cast iron construction.
BLA CODEWEIGHT KGA MMB MM146470 
0.7 185 165 146472 
1.5 310 290 146474 
2.5 360 320 146476 
3.2 400 360 146478 
4 450 410 SKU: 146470, 146472, 146474, 146476, 146478 -
Anchoring and Mooring, Bow and Anchor Rollers
Marine Town Bow Roller – Chrome Brass
Marine Town Bow Roller – Chrome Brass
Heavy duty cast brass construction. Triangular base with raised side plates for extra anchoring security in rough conditions. No retaining pin.
BLA CODEOVERALL LENGTH MMWIDTH MMHEIGHT MMROLLER WIDTH MMMOUNT SCREWS MM192052 
140 70 60 25 6 c/s SKU: 192052 -
Anchoring and Mooring
Anchor Swivel Connector – 316 Stainless Steel suits 6-8mm Chain
Anchor Swivel Connector – 316 Stainless Steel suits 6-8mm Chain
- Pulls easily over bow roller.
- Pins removed using allen wrench.
- 316G Stainless Steel.
- Stamped with rated load.
Part No. 110330 Length (A) 84mm Width (D) 28mm Suits Chain Size 6mm-8mm Chain End (B) 9mm Anchor End (C) 16mm Pin Diameter Short (E) / Long (F) 7.5mm / 10mm Safe Working Load 625kg Note Use with Loctite thread adhesive. SKU: 110330 -
Anchoring and Mooring, Bollards and Cleats
SAW Stainless Steel Split Bollard – Spring Loaded Captive Pin
-8%
Anchoring and Mooring, Bollards and CleatsSAW Stainless Steel Split Bollard – Spring Loaded Captive Pin
SAW Stainless Steel Split Bollard – Spring Loaded Captive Pin
Heavy duty 316G stainless steel cross bollards with a centre split for securing anchor chain into the bollard.
In addition, this cross bollard features a captive spring pin for locking in general link chain.
PART NUMBER BASE DIMENSIONS WIDTH HEIGHT CHAIN LINK SIZE MOUNTING HOLES SAW-29100 
62mm x 62mm 122mm 84mm 8-10mm Long Link 4 x 7mm holes with 41mm centres SAW-29102 86mm x 86mm 140mm 115mm 10-13mm 4 x 8mm holes with 57mm centres SKU: SAW-29100, SAW-29102
