-
×
SAW Stainless Steel Split Bollard - No Pin
1 × $82.00
Subtotal: $82.00
BLA Cross Bollards – Cast Alloy
Inexpensive non polished die-cast alloy construction. Suitable as a weld on fitting for aluminium boat manufacturers.
|
BLA CODE
|
SHAFT MM
|
HEIGHT MM
|
BASE DIA. MM
|
|---|---|---|---|
| BLA-192142 | 20 | 83 | 55 x 58 |
| Weight | 2 kg |
|---|---|
| Width | 80mm, 100mm, 142mm |
| Pack Size | Single, 20 |
Related products
-
Anchoring and Mooring
Anchor Swivel Connector – 316 Stainless Steel suits 10-12mm Chain (110332)
Anchor Swivel Connector – 316 Stainless Steel suits 10-12mm Chain (110332)
- Pulls easily over bow roller.
- Pins removed using allen wrench.
- 316G Stainless Steel.
- Stamped with rated load.
Part No. 110332 Length (A) 97mm Width (D) 37mm Suits Chain Size 10mm Chain End (B) 14mm Anchor End (C) 23mm Pin Diameter Short (E) / Long (F) 10mm / 12mm Safe Working Load 1250kg Note Use with Loctite thread adhesive. SKU: 110332 -
Anchoring and Mooring, Bollards and Cleats
SAW Standard Duty Cleats – Stainless Steel
SAW Standard Duty Cleats – Stainless Steel
Highly Polished 316G stainless steel finish.
PART NUMBER DESCRIPTION LENGTH WIDTH SAW-29175 
6”(150mm) 316 S/S Cleat 150mm 45mm SAW-29176 8”(200mm) O/Base Stainless Steel Cleat 316 200mm 55mm SAW-29177 316 25cm O/Base Stainless Steel Cleat 250mm 67mm SAW-29179 300mm 316 Stainless Steel Cleat 300mm 87mm SKU: SAW-29175, SAW-29176, SAW-29177, SAW-29179 -
Anchoring and Mooring, Fenders, Floats, Buoys, Boat Hooks
SAW Fastfender 32 Hanger Clips
SAW Fastfender 32 Hanger ClipsEasy one hand use, these FastFender clips make it easy to attach fenders to rails up to 32mm in diameter.
- Suits 6-10mm rope.
- Resistant to seawater and UV rays.
- Attach and remove boat fenders quickly.
- Suitable for boats, yachts, cruisers and motorboats.
- Available in three colours.
PART NUMBER COLOUR WEIGHT DIMENSIONS SAW-37587BLK Black 120g 158mm x 72mm x 40mm SAW-37587BLU Blue 120g 158mm x 72mm x 40mm SAW-37587LG Light Grey 120g 158mm x 72mm x 40mm SKU: SAW-37587BLK, SAW-37587BLU, SAW-37587LG -
Anchoring and Mooring, Bollards and Cleats
SAW Stainless Steel Split Bollard – No Pin
SAW Stainless Steel Split Bollard – No Pin
316 marine-grade stainless steel cross bollard featuring a split for securing anchor chain through the centre.
This split bollard will accept chain links from 8mm to 10mm.
PART NUMBER BASE DIMENSIONS WIDTH HEIGHT MOUNTING HOLES SAW-29101 
62mm x 62mm 94mm 84mm 4 x 6mm – hole centres are 41mm apart SKU: SAW-29101
