Anchor Swivel Connector - 316 Stainless Steel suits 10-12mm Chain (110332) Subtotal: $67.95
BLA Cross Bollards – Cast Alloy
Inexpensive non polished die-cast alloy construction. Suitable as a weld on fitting for aluminium boat manufacturers.
|
BLA CODE
|
SHAFT MM
|
HEIGHT MM
|
BASE DIA. MM
|
|---|---|---|---|
| BLA-192142 | 20 | 83 | 55 x 58 |
| Weight | 2 kg |
|---|---|
| Width | 80mm, 100mm, 142mm |
| Pack Size | Single, 20 |
Related products
-
Anchoring and Mooring, Bow and Anchor Rollers
Marine Town Bow Roller – Chrome Brass
Marine Town Bow Roller – Chrome Brass
Heavy duty cast brass construction. Triangular base with raised side plates for extra anchoring security in rough conditions. No retaining pin.
BLA CODEOVERALL LENGTH MMWIDTH MMHEIGHT MMROLLER WIDTH MMMOUNT SCREWS MM192052 
140 70 60 25 6 c/s SKU: 192052 -
Anchoring and Mooring, Bollards and Cleats
SAW Stainless Steel Split Bollard – Spring Loaded Captive Pin
-8%
Anchoring and Mooring, Bollards and CleatsSAW Stainless Steel Split Bollard – Spring Loaded Captive Pin
SAW Stainless Steel Split Bollard – Spring Loaded Captive Pin
Heavy duty 316G stainless steel cross bollards with a centre split for securing anchor chain into the bollard.
In addition, this cross bollard features a captive spring pin for locking in general link chain.
PART NUMBER BASE DIMENSIONS WIDTH HEIGHT CHAIN LINK SIZE MOUNTING HOLES SAW-29100 
62mm x 62mm 122mm 84mm 8-10mm Long Link 4 x 7mm holes with 41mm centres SAW-29102 86mm x 86mm 140mm 115mm 10-13mm 4 x 8mm holes with 57mm centres SKU: SAW-29100, SAW-29102 -
Anchoring and Mooring, Bollards and Cleats
SAW Stainless Steel Split Bollard – No Pin
SAW Stainless Steel Split Bollard – No Pin
316 marine-grade stainless steel cross bollard featuring a split for securing anchor chain through the centre.
This split bollard will accept chain links from 8mm to 10mm.
PART NUMBER BASE DIMENSIONS WIDTH HEIGHT MOUNTING HOLES SAW-29101 
62mm x 62mm 94mm 84mm 4 x 6mm – hole centres are 41mm apart SKU: SAW-29101 -
Anchoring and Mooring, Fenders, Floats, Buoys, Boat Hooks
BLA Anchor Retriever – 250mm Styrene Float
BLA Anchor Retriever
Used in conjunction with existing anchoring tackle, the stainless steel ring fits around the anchor rode for deep water anchoring. Motoring forward at 5 to 6 knots lifts the anchor to the float ring. When the anchor chain has fully passed through the ring the anchor is held at the surface. This allows easy retrieval of the anchor rode without the continuous weight of ground tackle.
BLA CODEFLOAT DIA.MMRING DIA. MM144301 
250 125 144302 300 125 SKU: 144301
