Anchor Swivel Connector - 316 Stainless Steel suits 10-12mm Chain (110332) Subtotal: $67.95
BLA Cross Bollards – Cast Alloy
Inexpensive non polished die-cast alloy construction. Suitable as a weld on fitting for aluminium boat manufacturers.
|
BLA CODE
|
SHAFT MM
|
HEIGHT MM
|
BASE DIA. MM
|
|---|---|---|---|
| BLA-192142 | 20 | 83 | 55 x 58 |
| Weight | 2 kg |
|---|---|
| Width | 80mm, 100mm, 142mm |
| Pack Size | Single, 20 |
Related products
-
Anchoring and Mooring, Anchors
BLA Folding Anchor – Galvanised
BLA Folding Anchor – Galvanised
Most suitable for use with inflatable boats, canoes, kayaks or small dinghies where space is at a premium. Assembled in seconds. Hot dipped galvanised cast iron construction.
BLA CODEWEIGHT KGA MMB MM146470 
0.7 185 165 146472 
1.5 310 290 146474 
2.5 360 320 146476 
3.2 400 360 146478 
4 450 410 SKU: 146470, 146472, 146474, 146476, 146478 -
Anchoring and Mooring
Anchor Swivel Connector – 316 Stainless Steel suits 6-8mm Chain
Anchor Swivel Connector – 316 Stainless Steel suits 6-8mm Chain
- Pulls easily over bow roller.
- Pins removed using allen wrench.
- 316G Stainless Steel.
- Stamped with rated load.
Part No. 110330 Length (A) 84mm Width (D) 28mm Suits Chain Size 6mm-8mm Chain End (B) 9mm Anchor End (C) 16mm Pin Diameter Short (E) / Long (F) 7.5mm / 10mm Safe Working Load 625kg Note Use with Loctite thread adhesive. SKU: 110330 -
Anchoring and Mooring, Fenders, Floats, Buoys, Boat Hooks
BLA Anchor Retriever – 300mm Styrene Float
-10%
Anchoring and Mooring, Fenders, Floats, Buoys, Boat HooksBLA Anchor Retriever – 300mm Styrene Float
BLA Anchor Retriever
Used in conjunction with existing anchoring tackle, the stainless steel ring fits around the anchor rode for deep water anchoring. Motoring forward at 5 to 6 knots lifts the anchor to the float ring. When the anchor chain has fully passed through the ring the anchor is held at the surface. This allows easy retrieval of the anchor rode without the continuous weight of ground tackle.
BLA CODEFLOAT DIA.MMRING DIA. MM144301 250 125 144302 300 125 SKU: 144302 -
Anchoring and Mooring, Anchors
BLA Plough Anchor – Galvanised
BLA Plough Anchor – Galvanised
Ideal for sand and mud. Provides safe and sure anchoring for heavier craft. Fitted with retrieval eye for ease of removal if snagged. Heavy duty hot dipped galvanised finish with lead filled tip. Anchor size refers to approximate weight in pounds.
BLA CODESIZEAPPROX. BOAT LENGTH MWEIGHT APPROX. KGA MMB MMC MMD MM146152 
10P 5 4.5 200 550 200 270 146154 
15P 7 6.8 250 580 255 280 146156 
20P 8 9 280 700 270 350 146158 
27P 9 12.3 325 760 290 380 146160 
35P 11 15.9 375 790 330 400 146162 
45P 13 20.4 395 850 335 440 146164 
60P 15 27.2 450 940 375 470 146166 
80P 16 36.3 490 1060 400 520 146168 
100P 17 45.4 490 1120 400 570 SKU: 146152, 146154, 146156, 146158, 146160, 146162, 146164, 146166, 146168
